







The SuperATV Winch Quick Connect Plugs give a removable winch a convenient disconnect point, so you can take it off the machine without undoing the battery terminals every time. The pair accepts 6–10 AWG wire and includes covers for the connections when they are apart.
Build the wiring around the plug’s 120-amp maximum, not just the number on the winch. A hard pull can demand more current than an easy one. Match the cable and connector to the equipment’s electrical requirements, secure the cable away from sharp edges, and switch the load off before separating the plugs.
Includes:
- One pair of quick-connect plugs
- Protective covers
Specifications
| Manufacturer | SuperATV |
|---|---|
| Part Number(s) | WN-U-QCPC |
| Maximum Current | 120 amps |
| Wire Size | 6–10 AWG |
| Voltage | 12, 24, or 36V DC |
| Use | Low-voltage removable electrical connections |
Fitment
Universal low-voltage use; not vehicle-specific. Use only on 12–36V DC equipment within the 120-amp connector rating.
FAQs
1. Will these work with every 6,000-pound winch?
No. SuperATV markets them for winches up to 6,000 pounds, but the connector is rated for a maximum of 120 amps. The winch’s current draw must stay within that limit.
2. What wire fits the plugs?
They accept 6–10 AWG wire. Cable length and current draw still determine which gauge the circuit needs.
3. Can I use them for a charger?
They can provide a disconnect for compatible low-voltage equipment, including a charger. Match voltage, polarity, cable size, and current before wiring the pair.
4. Can I unplug the winch while it is pulling?
Stop the winch and switch off the load before connecting or separating the plugs.
5. What are the covers for?
Use them when the plugs are disconnected to help keep debris off the contacts. Inspect the contacts and cable crimps before use.