
The SuperATV Winch Hook and Rubber Stopper replaces two frequently handled pieces at the end of a synthetic winch line. The zinc-plated steel hook provides the attachment point, while the rubber stopper cushions contact at the fairlead when the line is stowed.
The stopper uses a two-piece design that assembles around the rope. Bring the hook in slowly and stop before pulling it hard into the fairlead. Keep the hook seated correctly on rated recovery gear, and replace damaged parts before the next pull.
Includes:
- Zinc-plated steel winch hook
- Steel attachment pin
- Two-piece rubber stopper
Specifications
| Manufacturer | SuperATV |
|---|---|
| Part Number(s) | WN-HOOK |
| Hook Material | Steel |
| Hook Finish | Zinc plated |
| Stopper | Two-piece interlocking rubber |
| Listed Winches | 2,500, 3,500, 4,500, 5,000, and 6,000 lb. SuperATV |
Fitment
Universal vehicle application; listed for SuperATV 2,500–6,000 lb. synthetic-rope winches. Match the hook attachment and stopper to the rope being used.
FAQs
1. What does the rubber stopper do?
It provides a cushion between the hook and fairlead when the rope is stowed. It is not an automatic shut-off.
2. Do I have to thread the whole rope through the stopper?
The two-piece stopper assembles around the rope.
3. Can I hook the winch line back onto itself?
No. Use suitable rated rigging rather than hooking directly around the winch rope.
4. Does this upgrade the winch rating?
No. It does not increase the rated capacity of the winch, rope, or mounting system.
5. When should the hook be replaced?
Replace it if it is bent, cracked, badly worn, or no longer retains its attachment properly. Also inspect the pin and rope-end connection.