
Route the brake hose with the suspension in mind. This Wilwood flexline has a listed 18.00-inch overall length and -3 Female / -3 Female end connections.
Mock up the line through full steering travel and suspension movement. You need enough slack for travel without a loop that can rub the tire, get pinched, or touch a hot surface. Match the fitting seat and thread at both ends; a hose should never be used to pull a fitting into alignment.
Includes
- Wilwood brake flexline, part 220-2156; Wilwood lists quantity per kit as 1
Specifications
| Manufacturer | Wilwood |
|---|---|
| Part number | 220-2156 |
Size & Fittings
| Length | 18.00 |
|---|---|
| Size | -3 |
| Inlet Fitting | -3 Female |
| Inlet Fitting Angle | Straight |
| Outlet Fitting | -3 Female |
| Outlet Fitting Angle | Straight |
| Weight (lb) | 0.50 |
| Qty Each | 1 |
| Qty per Kit | 1 |
Fitment
For brake plumbing using the listed hose length and end connections. This is a component hose, not a vehicle-specific line kit.
Installation Resources
- Wilwood product specifications and drawings
FAQ
Is this a vehicle-specific line kit?
No. It is a component flexline with the length and end connections shown above. Wilwood lists quantity per kit as 1 for this SKU.
How should I choose length?
Measure the route at full droop, compression, and steering lock, including the clearance needed around moving parts.
Does a matching thread guarantee a seal?
No. Match the fitting type and sealing seat as well as the thread.