
Match the caliper to the rotor and hydraulics before you build the bracket. This Wilwood Forged Dynapro 6A Lug Mount is a 6-piston caliper with a 0.38-inch nominal rotor width and lug mounting.
Piston area matters to pedal feel and fluid demand. This caliper lists 5.06 square inches of piston area, so compare it with your master-cylinder bore and the rest of the brake system. Use the mounting dimensions and rotor limits below to build around the caliper you are actually buying.
Includes:
- One Wilwood caliper for the selected left-hand or right-hand side
Specifications
Available Configurations
| Part Number | Side |
|---|---|
| 120-13431 | Left Hand (LH) |
| 120-13430 | Right Hand (RH) |
| Manufacturer | Wilwood |
|---|
Caliper Specifications
| Piston Count | 6 |
|---|---|
| Piston Area (in²) | 5.06 |
| Piston Type | Stainless |
| Dust Boot | No |
| Rotor Width (in) | 0.38 |
| Rotor Diameter(in) | 13.00 |
| Pad Area (in²) | 7.3 |
| Pad Volume (in³) | 2.4 |
| Material | Forged Aluminium |
| Weight(Lbs) | 4.9 |
| Color | Anodize |
| Finish | Type III Anodize |
Mounting
| Mount Center(in) | 5.25 |
|---|---|
| Mount Side |
|
| Mount Type | Lug |
Rotor Compatibility
| Rotor Width (in) | 0.38 |
|---|---|
| Maximum Rotor Width (in) | 0.38 |
| Minimum Rotor Width (in) | 0.25 |
| Maximum Rotor Diameter(in) | 13.00 |
| Minimum Rotor Diameter(in) | 10.00 |
Brake Pad Specifications
| Brake Pad Type 1 | 6712 |
|---|---|
| Total Pad Area (in²) | 7.3 |
| Total Pad Volume (in³) | 2.4 |
Piston Specifications
| Piston 1 Bore (in) | 1.62 |
|---|---|
| Piston 2 Bore (in) | 1.38 |
| Piston 3 Bore (in) | 1.38 |
| Total Piston Area (in²) | 5.06 |
Mounting Specifications
| Mount Type | Lug |
|---|---|
| Mount Side |
|
| Mount Center(in) | 5.25 |
| Mount Hole Size(in) | 0.39 |
| Mount Height(in) | 2.03 |
| Inlet Thread Size | 1/8-27 NPT |
Fitment
Component fitment is based on mounting dimensions, rotor width and diameter, pad shape, and hydraulic requirements. This is a caliper, not a vehicle-specific conversion kit.
Select Left Hand (LH) or Right Hand (RH) for the required mounting side. Each selection has its own Wilwood part number.
Brake pad shape: 6712.
FAQs
Is this a pair or a complete brake kit?
It is one caliper. Select the matching side and other system components separately.
Will any rotor of the same diameter work?
No. Rotor thickness, caliper mounting height, mounting centers, and pad sweep must also match the listed limits.
Why does piston area matter?
It affects how much fluid the caliper needs and how the system responds to the master cylinder. Match it as part of the complete hydraulic system.