









The SuperATV UTV/ATV CV Axle Puller grips an accessible CV cup so a slide hammer can apply pulling force to a stuck axle joint. The steel attachment has eight bolt locations, allowing the four working bolts to be positioned around the cup; four additional bolts are supplied as spares.
The knurled 4.7-pound slide hammer and T-handle provide grip and control during removal. Fit depends on the cup diameter and tool access: the cup must be less than 98 mm across. The slide-hammer weight describes that component, not the weight of the complete tool.
Includes:
- CV cup puller attachment
- Knurled slide hammer with T-handle
- (8) bolts: four working bolts and four spares
Specifications
| Manufacturer | SuperATV |
|---|---|
| Product Type | CV axle removal tool |
| Material | Steel |
| Bolt Locations | 8 |
| Working Bolts | 4 |
| CV Cup Diameter | Less than 98 mm |
| Slide Hammer Weight | 4.7 lb; slide hammer component only |
| Part Number | AXP-U-001-01 |
| Part Number |
|---|
| AXP-U-001-01 |
Fitment
| Application | Requirement |
|---|---|
| UTV / ATV CV axle removal | CV cup outside diameter under 98 mm; sufficient access for the tool |
Vehicle make alone does not establish tool fit. The tool must grip the cup securely without interference.
FAQ
1. Does the 98 mm limit refer to the axle shaft?
No. It refers to the outside diameter of the CV cup that the attachment grips.
2. How many bolts are used at once?
The manufacturer recommends four working bolts; eight are supplied so four are available as spares.
3. Is 4.7 pounds the total tool weight?
No. That figure describes the slide hammer only.
4. Does this guarantee damage-free removal?
No. Cup condition, tool engagement, corrosion, and the vehicle retaining arrangement all affect removal. Follow the tool and vehicle service instructions.