



The Spidertrax Ultimate Unit Bearing – 5 on 5.5", 5/8" Studs, 40-Spline is a purpose-built racing wheel end for Ultra4, rock racing, and high-performance solid axle or IFS builds. The FUBR55125840 combines genuine Timken bearings, heat-treated chromoly construction, and an integrated 40-spline drive system in a compact assembly designed specifically around Spidertrax 40-spline axle shafts.
This version uses a 5 on 5.5" wheel bolt pattern with 5/8"-18 studs and measures just 2.125" from the flange to the wheel mount. A 4.235" hub register provides wheel centering, while thread-locked spindle nuts backed by a keyed lock ring secure the bearing assembly. For builders stepping into a 40-spline axle system, this gives the wheel end, axle shaft, and drive interface a common platform.
Key Features:
- Designed specifically for Spidertrax 40-spline axle shafts
- 5 on 5.5" wheel bolt pattern
- 5/8"-18 wheel studs
- Heat-treated chromoly construction
- Genuine Timken bearings
- Integrated 40-spline drive system
- No separate drive slug required
- 2.125" flange-to-wheel-mount span
- 4.235" hub register for wheel centering
- Thread-locked spindle nuts with keyed lock ring
- Designed for solid axle and IFS applications
- Built by Spidertrax in Colorado
Specifications
| Specification | Details |
|---|---|
| Manufacturer | Spidertrax |
| Manufacturer Part Number | FUBR55125840 |
| Product Type | Ultimate Unit Bearing |
| Wheel Bolt Pattern | 5 on 5.5" |
| Wheel Stud Size | 5/8"-18 |
| Axle Shaft Spline Count | 40-Spline |
| Axle Shaft Compatibility | Spidertrax 40-Spline Axle Shafts |
| Bearing Manufacturer | Timken |
| Construction | Heat-Treated Chromoly |
| Drive System | Integrated 40-Spline |
| Flange-to-Wheel-Mount Span | 2.125" |
| Hub Register | 4.235" |
| Spindle Nut Retention | Thread-Locked Nuts with Keyed Lock Ring |
| Axle Configuration | Solid Axle / IFS |
| Manufacturing Location | Colorado, USA |
| Primary Application | 40-Spline Ultra4 & High-Performance Off-Road Axle Builds |
Fitment
Designed For:
- Spidertrax 40-spline axle shafts
- 5 on 5.5" wheel bolt pattern
- Applications using 5/8"-18 wheel studs
- Ultra4 and rock racing axle systems
- High-performance solid axle builds
- High-performance IFS builds
Fitment Notes:
- FUBR55125840 is specifically designed around Spidertrax 40-spline axle shafts.
- Verify the 5 on 5.5" wheel bolt pattern and 5/8"-18 stud compatibility with the wheels being used.
- The wheel should be compatible with the 4.235" hub register.
- The integrated drive system eliminates the need for a separate drive slug.
- The Spidertrax 5-Lug Drive Snout is available separately for easier wheel and tire installation.
- The compatible Spidertrax Drive Snout Cover is sold separately.
FAQ
What is the difference between the 35-spline and 40-spline Spidertrax Ultimate Unit Bearings?
The primary difference is the axle shaft interface. FUBR55125840 is specifically designed for Spidertrax 40-spline axle shafts, while the corresponding 35-spline model is designed around Spidertrax 35-spline shafts.
What wheel bolt pattern does the FUBR55125840 use?
This Ultimate Unit Bearing uses a 5 on 5.5" wheel bolt pattern with 5/8"-18 wheel studs.
Does the Spidertrax Ultimate Unit Bearing require a separate drive slug?
No. Spidertrax integrates the 40-spline drive interface into the Ultimate Unit Bearing, eliminating the need for a separate conventional drive slug.
Can this Ultimate Unit Bearing be used with solid axle and IFS builds?
Yes. Spidertrax specifically identifies the compact 2.125" flange-to-wheel-mount span as suitable for both Ultra4 solid axle and IFS applications.
What keeps the spindle nuts from loosening?
Spidertrax thread-locks the spindle nuts and uses a keyed lock ring as an additional mechanical retention method.