




The Spidertrax Pro Series 45-Spline Unit Bearing – 6 on 6.5", 5/8"-18 is a purpose-built racing wheel end for high-performance IFS and full-float axle systems. Designed around massive 3.7" ID genuine Timken bearings, the PSUR6612PS45 combines full heat-treated chromoly construction with an integrated 45-spline drive and a compact 1.96" flange-to-wheel-mount span.
The 6 on 6.5" wheel bolt pattern uses 5/8"-18 heat-treated chromoly press-in shouldered studs, while a piloted hub register helps locate the wheel at installation. Spidertrax also thread locks the spindle nuts and backs them up with a keyed lock ring for positive bearing retention in demanding desert racing, rock racing, and high-performance off-road applications.
Includes:
- (1) Spidertrax Pro Series 45-Spline Unit Bearing
- (6) 5/8"-18 Heat-Treated Chromoly Press-In Shouldered Wheel Studs
- Integrated 45-Spline Drive
- Genuine Timken Bearing Assembly
Note: Drive Snout and Drive Cover are sold separately. This unit bearing is designed specifically for Spidertrax 45-spline IFS and full-floater axle shafts.
Specifications
| Specification | Details |
|---|---|
| Manufacturer | Spidertrax |
| Manufacturer Part Number | PSUR6612PS45 |
| Product Type | Pro Series Unit Bearing |
| Wheel Bolt Pattern | 6 on 6.5" |
| Wheel Stud Size | 5/8"-18 |
| Wheel Stud Design | Press-In Shouldered |
| Wheel Stud Material | Heat-Treated Chromoly |
| Wheel Stud Shoulder | 11/16" |
| Axle Shaft Spline Count | 45-Spline |
| Drive Design | Integrated 45-Spline Drive |
| Bearing Manufacturer | Timken |
| Bearing Inside Diameter | 3.7" |
| Unit Bearing Construction | Heat-Treated Chromoly |
| Flange-to-Wheel-Mount Span | 1.96" |
| Wheel Location | Piloted Hub Register |
| Spindle Nut Retention | Thread Locked with Keyed Lock Ring |
| Axle Configuration | IFS or Full-Float |
| Manufacturing Location | Loveland, Colorado, USA |
| Drive Snout | Sold Separately |
| Drive Cover | Sold Separately |
| Quantity | (1) Unit Bearing |
Fitment
Designed For:
- Spidertrax Pro Series wheel-end systems
- 45-spline Spidertrax IFS axle shafts
- 45-spline Spidertrax full-floater axle shafts
- 6 on 6.5" wheel bolt patterns
- Desert racing and rock racing applications
- High-performance custom IFS and solid axle builds
Fitment Notes:
- Axle shaft must use the compatible Spidertrax 45-spline wheel-end interface.
- Wheel bolt pattern is 6 on 6.5" with 5/8"-18 wheel studs.
- For Series 30 IFS applications, pair with the compatible 45-spline Series 30 stub shaft and Pro Series Builder Bell.
- Can also be used with compatible Spidertrax 45-spline full-floater axle shafts and Pro Series floater ends.
- Drive Snout and Drive Cover are sold separately when required by the axle configuration.
FAQ
What axle shafts fit the PSUR6612PS45 Unit Bearing?
Spidertrax specifically designed this unit bearing for its 45-spline IFS and full-floater axle shafts. The axle shaft must match the 45-spline Pro Series wheel-end interface.
What wheel bolt pattern does this Pro Series Unit Bearing use?
The PSUR6612PS45 uses a 6 on 6.5" wheel bolt pattern with six 5/8"-18 press-in shouldered chromoly wheel studs.
What bearings are used inside the Pro Series Unit Bearing?
Spidertrax uses genuine Timken bearings with a massive 3.7" inside diameter.
Can this Unit Bearing be used on both IFS and solid axles?
Yes. Spidertrax specifically describes the Pro Series Unit Bearing for both IFS and solid axle desert and rock racing applications. It can be paired with the appropriate 45-spline IFS stub shaft or full-floater axle shaft.
Are the Drive Snout and Drive Cover included?
No. Spidertrax states that the Drive Snout and Drive Cover are sold separately. Select those components based on the complete Pro Series axle and wheel-end configuration.