




The Spidertrax 3.5" Chromoly Ultimate Knuckle Kit with Double Shear High Steer is built for high-performance Spider 9 front axle systems where steering angle, strength, and wheel-end packaging matter. Designed for Spidertrax Ultimate Unit Bearings and Ultimate U-Joints, this knuckle system installs on Spider 9 housings with 3.5" OD axle tubes and delivers up to 50 degrees of steering angle.
Rather than using a traditional kingpin design, Spidertrax builds the Ultimate Knuckle around 7/8" spherical bearing pivot assemblies with 4340 Spider Shoulder Bolts. Heat-treated 4130 chromoly legs, TIG-welded construction, strategically placed gussets, and fully integrated double-shear high-steer arms create a compact steering knuckle designed around serious rock crawling and off-road racing.
Key Features:
- Heat-treated 4130 chromoly steel knuckle legs
- Fully integrated double-shear high-steer arms
- 7/8" spherical bearing pivot assemblies
- 4340 Spider Shoulder Bolts
- Up to 50° of steering angle
- CNC-manufactured components
- Inner knuckles machined after welding for spherical bearing fit
- Upper outer and lower inner knuckle gussets
- TIG-welded construction
- Made in the USA
Specifications
| Specification | Details |
|---|---|
| Manufacturer | Spidertrax |
| Manufacturer Part Number | CSKT312OH |
| Product Type | Ultimate Steering Knuckle System |
| Axle Platform | Spidertrax Spider 9 |
| Axle Tube Compatibility | 3.5" OD |
| Knuckle Leg Material | Heat-Treated 4130 Chromoly Steel |
| Pivot Design | 7/8" Spherical Bearing |
| Shoulder Bolt Material | 4340 |
| Maximum Steering Angle | 50° |
| Steering Arm | Integrated Double Shear High Steer |
| Wheel End Compatibility | Spidertrax Ultimate Unit Bearings |
| U-Joint Compatibility | Spidertrax Ultimate U-Joints |
| Axial Load Capacity | Over 21,500 lb Per Knuckle |
| Radial Load Capacity | Over 130,000 lb Per Knuckle |
| Construction | CNC Manufactured / TIG Welded |
| Manufacturing | Made in USA |
| Axle Position | Front |
| Primary Application | High-Performance Spider 9 Steering Axle Builds |
Fitment
Designed For:
- Spidertrax Spider 9 front axle housings
- Spider 9 housings with 3.5" OD axle tubes
- Spidertrax Ultimate Unit Bearings
- Spidertrax Ultimate U-Joints
- High-steer front axle configurations
Common Applications:
- Competition rock crawlers
- Rock bouncers
- Ultra4 and off-road race vehicles
- High-performance trail buggies
- Custom Spider 9 steering axle builds
Fitment Notes:
- Designed specifically for Spider 9 housings using 3.5" OD axle tubes.
- Designed around Spidertrax Ultimate Unit Bearings and Ultimate U-Joints.
- This model includes pre-welded double-shear high-steer arms.
- Spidertrax notes that product photos may show the mid-steer configuration; use the manufacturer drawing to verify the high-steer arm location for CSKT312OH.
- This is a Spidertrax steering system and should not be treated as a generic Dana 60 kingpin knuckle replacement.
- Verify the complete axle shaft, U-joint, unit bearing, brake, steering, and wheel package when planning the axle.
FAQ
What axle housing does the Spidertrax CSKT312OH Ultimate Knuckle fit?
Spidertrax designed this Ultimate Knuckle for Spider 9 axle housings using 3.5" OD axle tubes.
How much steering angle does the Spidertrax Ultimate Knuckle provide?
Spidertrax rates the Ultimate Knuckle for up to 50 degrees of steering angle. For comparison, Spidertrax states that an OEM-style Dana 60 knuckle is typically limited to approximately 38 degrees.
Does this version include the high-steer arms?
Yes. The CSKT312OH includes fully pre-welded, integrated double-shear high-steer arms. Spidertrax notes that some product photos show its mid-steer configuration, so refer to the dimensional drawing when comparing steering arm positions.
Does the Spidertrax Ultimate Knuckle use conventional kingpins?
No. The pivot system uses 7/8" spherical bearing assemblies consisting of a 4340 Spider Shoulder Bolt, shim washer, spherical bearing, shoulder washer, and Type C nut.
What wheel-end components are designed to work with these knuckles?
Spidertrax designed this knuckle system around its Ultimate Unit Bearings and Ultimate U-Joints. Those components should be considered when planning the complete front axle rather than treating the knuckles as standalone universal parts.