


















The PCI RaceAir Boost Dual Helmet Fresh Air System delivers clean, filtered airflow to one or two helmets, helping reduce visor fogging, dust intrusion, and driver discomfort during off-road racing and trail riding. Featuring a lightweight billet aluminum housing, brushless DC motor, and adjustable variable speed control, this compact helmet blower system is designed for UTVs, side-by-sides, rock crawlers, short-course trucks, and off-road race vehicles. Dual air outlets provide fresh airflow for driver and passenger helmet connections.
The RaceAir Boost Dual features a less-than-1-micron air filter and protective prefilter, adjustable airflow, and multiple mounting configurations for roll cage tubing or flat-panel installation. Choose between the integrated variable speed controller or an optional remote control with a 10-foot cable for convenient cockpit adjustment. The housing can be mounted sideways, upright, or upside down, allowing builders to position the system around roll cage tubing, roof panels, and available cockpit space.
Includes:
- (1) PCI RaceAir Boost Dual Helmet Fresh Air System
- (1) Variable Speed Controller – Integrated on Unit or 10' Remote, Depending on Selected Option
- (1) Selected Mounting Bracket with Hardware
- (1) Less Than 1-Micron Air Filter
- (1) Protective Prefilter
Optional Upgrade: Select "Add Remote Control" to receive the remote variable speed controller with a 10-foot cable for convenient dash or cockpit mounting.
Important: Select the correct mounting configuration and remote controller option before ordering. Helmet air hoses, rocker switch, and additional wiring accessories are not included in the confirmed package contents.
Specifications
| Manufacturer | PCI Race Radios |
|---|---|
| Manufacturer Part Number | 3550 / Variant Dependent |
| Product Series | RaceAir Boost |
| Product Type | Dual Helmet Fresh Air System |
| Helmet Capacity | 1–2 Helmets |
| Air Outlets | 2 |
| Motor Type | Brushless DC Motor |
| Airflow Control | Variable Speed |
| Controller Options | Integrated or Optional Remote |
| Remote Controller Cable | 10 ft |
| Published Airflow | 3,200–3,600 CFM Depending on Hose Length (PCI Published Specification) |
| Electrical Draw | 2.8–4.0 Amps |
| Recommended Fuse | 5 Amp |
| Housing Material | Billet Aluminum |
| System Weight | 2.1 lb Including Bracket & Controller |
| Primary Air Filter | Less Than 1 Micron |
| Prefilter | Included |
| Mounting Orientation | Upright, Sideways or Inverted |
| Mounting Type | Selectable Roll Bar Clamp or Panel Mount |
| Mounting Hardware | Included |
| Manufacturer Warranty | 2-Year Manufacturer Defect Warranty |
| Installation Type | Universal / Application-Specific Mounting |
| Primary Application | UTV, Side-by-Side, Off-Road Racing & Dual Helmet Fresh Air Systems |
Available Mounting Configurations
| Mounting Option | Application |
|---|---|
| 1.25" / 2.00" | Universal Roll Cage Tubing |
| 1.50" / 1.75" | Universal Roll Cage Tubing |
| 1.85" / 2.50" | Can-Am X3 / Compatible Roll Cage Tubing |
| Panel Mount Plate | Flat Panel / Custom Fabrication |
| 1.8" Speed UTV | Speed UTV Roll Cage |
| Maverick R | Can-Am Maverick R |
| RZR Pro R | Polaris RZR Pro R |
Mounting Note: Universal roll bar brackets can be rotated 90 degrees to accommodate the alternate tubing diameter specified for the selected bracket. Verify tubing diameter and available mounting clearance before ordering.
Speed Controller Options
- Integrated Controller: Variable speed adjustment directly at the RaceAir Boost Dual unit.
- Remote Controller: Optional variable speed controller with a 10-foot cable for dash or cockpit mounting.
Airflow Note: PCI publishes an airflow specification of 3,200–3,600 CFM depending on hose length. Actual airflow delivered to the helmet may vary with hose length, routing, and system configuration.
Fitment
Universal helmet fresh air system designed for off-road vehicles using compatible roll cage or panel mounting configurations.
Common Applications:
- UTVs & Side-by-Sides
- Can-Am Maverick X3 & Maverick R
- Polaris RZR Pro R
- Speed UTV
- Rock Crawlers & Rock Bouncers
- Ultra4 & Desert Race Vehicles
- Short-Course & Spec Trucks
- Custom Tube-Chassis Buggies
- Single or Dual Helmet Fresh Air Installations
Mounting Compatibility:
- 1.25" / 2.00": Universal roll cage tubing with compatible diameters.
- 1.50" / 1.75": Universal roll cage tubing with compatible diameters.
- 1.85" / 2.50": Can-Am X3 and compatible roll cage tubing.
- Panel Mount Plate: Flat-panel or custom fabricated mounting locations.
- 1.8" Speed UTV: Speed UTV roll cage applications.
- Maverick R: Can-Am Maverick R mounting configuration.
- RZR Pro R: Polaris RZR Pro R mounting configuration.
Fitment & Installation Notes:
- Select the mounting bracket that matches your vehicle's roll cage tubing diameter or panel mounting arrangement.
- Universal roll bar brackets can be rotated 90 degrees to accommodate the alternate listed tube diameter.
- Housing supports upright, sideways, and upside-down mounting orientations.
- Remote controller option includes a 10-foot cable for convenient cockpit mounting.
- Verify helmet air hose connection requirements and available routing space.
- Keep the air intake away from excessive exhaust heat, water spray, and concentrated dust exposure where possible.
- Secure wiring and hoses away from moving components and sharp edges.
- Allow sufficient clearance to remove and clean the air filter.
- Use appropriate electrical protection and follow PCI installation instructions.
- Helmet hoses and additional electrical accessories must be selected separately as required.
FAQ
How many helmets can the PCI RaceAir Boost Dual supply?
The RaceAir Boost Dual features two air outlets and is designed to supply filtered fresh air to one or two compatible helmet connections.
Does the RaceAir Boost Dual have adjustable fan speed?
Yes. The system features variable speed control. Depending on the selected configuration, adjustment is available directly at the unit or through an optional remote controller with a 10-foot cable.
What mounting options are available?
The RaceAir Boost Dual offers panel mounting, dedicated Maverick R, RZR Pro R, and Speed UTV options, plus universal roll bar brackets for 1.25"/2", 1.5"/1.75", and 1.85"/2.5" tubing.
Will the RaceAir Boost Dual fit a Can-Am Maverick X3?
Yes. PCI offers a 1.85"/2.5" mounting bracket configuration for compatible Can-Am Maverick X3 roll cage applications. Verify the actual tubing diameter before ordering.
Can the RaceAir Boost Dual be mounted upside down?
Yes. PCI specifies that the billet housing can be mounted sideways, upside down, or in other suitable orientations, allowing flexible installation in compact off-road cockpits.
How much power does the RaceAir Boost Dual use?
PCI lists an electrical draw of approximately 2.8–4 amps, with a recommended 5-amp fuse. Follow the manufacturer's wiring instructions for the selected system.
Does the RaceAir Boost Dual include a filter?
Yes. The system includes a less-than-1-micron air filter and a protective prefilter designed to help reduce dust and debris entering the helmet ventilation system.
How do I clean the RaceAir Boost filter?
Tap the filter gently to remove loose dirt, then apply a suitable cleaner such as Simple Green or Formula 409 and allow it to sit for 10–15 minutes. Rinse from the inside outward using low-pressure water. Allow the filter to air dry completely away from direct sunlight and heat before reinstalling.
What is the difference between the integrated and remote speed controllers?
The integrated controller allows adjustment directly at the RaceAir unit. The optional remote version provides a separate variable speed controller with a 10-foot cable for mounting within easy reach of the driver.
Are helmet air hoses included?
No. Helmet air hoses are not included in the confirmed RaceAir Boost Dual package contents and must be selected separately to match the helmet and installation requirements.
Will this system help prevent helmet visor fogging?
The RaceAir Boost Dual supplies fresh airflow to compatible helmet ventilation connections, which can help reduce moisture buildup and visor fogging. Actual performance depends on helmet design, hose routing, and operating conditions.
What warranty does PCI provide?
PCI lists a two-year manufacturer defect warranty for the RaceAir Boost Dual. Coverage is subject to the manufacturer's applicable warranty terms.