







The SuperATV Polaris Xpedition 40" Light Bar Roof Mount positions a 40-inch light bar at the roof using a vehicle-specific steel bracket. It gives the bar a defined mounting location while keeping the layout matched to the listed machine.
Set the light in place before final tightening and work through door, windshield, roof, and steering clearance. Nominal bar length alone does not establish bracket fit. The spacing between mounting holes and the actual cage shape need to work together.
Includes:
- Light bar mounting bracket kit
- Installation hardware
- Light bar only when selected
Bracket-only options do not include a light. Any light, switch, or harness supplied with a bundle depends on the selected package.
Specifications
| Manufacturer | SuperATV |
|---|---|
| Product Type | Light Mounts |
| Part Numbers | LBM-P-XPD-001-004-00, LBM-P-XPD-004-00 |
| Construction | 1/8-inch steel |
| Finish | UV-resistant powder coat |
| Light size | 40 in.; match mounting dimensions |
| Location | Roof |
| Add a light bar? | Yes - 40" Straight Light Bar; No thank you |
Fitment
| Make | Model | Year Range |
|---|---|---|
| Polaris | Xpedition ADV NorthStar | 2024+ |
| Polaris | Xpedition ADV Premium | 2024+ |
| Polaris | Xpedition ADV Ultimate | 2024+ |
| Polaris | Xpedition ADV 5 NorthStar | 2024+ |
| Polaris | Xpedition ADV 5 Premium | 2024+ |
| Polaris | Xpedition ADV 5 Ultimate | 2024+ |
| Polaris | Xpedition XP NorthStar | 2024+ |
| Polaris | Xpedition XP Premium | 2024+ |
| Polaris | Xpedition XP Ultimate | 2024+ |
| Polaris | Xpedition XP 5 NorthStar | 2024+ |
| Polaris | Xpedition XP 5 Premium | 2024+ |
| Polaris | Xpedition XP 5 Ultimate | 2024+ |
Fitment Note: Match the year, trim, seating configuration, and selected kit to the applications above. Model-specific exclusions take priority over the general model listing.
FAQs
1. Is a light included?
A light is included only if the selected product option explicitly includes one. Bracket-only options do not include lights.
2. How should I choose a clamp size?
Measure the outside diameter or formed profile at the intended mounting point. Different tubes on one cage can use different sizes.
3. Why mock up the bracket first?
It lets you check beam aim and accessory clearance before tightening hardware or drilling mounting holes.