Skip to product information
1 of 4

SuperATV

Polaris Ranger SP 570 Ready-Fit Winch

Polaris Ranger SP 570 Ready-Fit Winch

SKU:QWM-P-RAN570-4500

Regular price $519.95
Regular price Sale price $519.95
Sale Sold out
Shipping calculated at checkout.
Quantity
  • 4,500 lb.; selected configuration rated line pull
  • Mount Material: 3/16-inch steel
  • Controls: Wired rocker switch and wireless remote
  • Motor: 12V permanent-magnet DC; 1.3 HP for 4,500 lb
View full details

The SuperATV Polaris Ranger SP 570 Ready-Fit Winch pairs a 4,500 lb. Black Ops winch with application-specific mounting and preassembled electrical components. It gives the Polaris Ranger SP 570 a controlled recovery tool for times when tire traction alone will not move the machine.

This package is built around a 4,500 lb. winch for the SP 570 chassis. The plug-and-play connection depends on the machine having a bus bar; machines without one require wiring modifications.

The 50-foot synthetic rope is easier to carry to an anchor than an equivalent steel line, while the wired rocker switch and wireless remote offer different control positions. Plan the pull before applying power: capacity selection, the mounting structure, and the condition of the recovery points all matter.

Includes:

  • Black Ops winch in the selected 4,500 lb. capacity
  • 50-foot synthetic winch rope
  • Preassembled solenoid and application-specific wiring
  • Wireless remote and wired rocker switch
  • Winch hook, pull strap, and rope stopper
  • Vehicle-specific 3/16-inch steel mounting plate
  • Aluminum hawse fairlead
  • Installation hardware

Specifications
Manufacturer SuperATV
Product Type Ready-Fit Recovery Winch Kit
Part Number(s) QWM-P-RAN570-4500
Rated Line Pull 4,500 lb.; selected configuration
Motor 12V permanent-magnet DC; 1.3 HP for 4,500 lb.
Rope 50-foot synthetic
Mount Material 3/16-inch steel
Controls Wired rocker switch and wireless remote
Published Remote Range Up to 50 feet
Assembly Prewired solenoid; vehicle-specific installation
Primary Application UTV vehicle recovery

Available configurations:

Part Number Selection
QWM-P-RAN570-4500 Standard package

Fitment
Make Model / Submodel Year Range
Polaris Ranger SP 570 2022+
Polaris Ranger SP 570 Premium 2022+
Polaris Ranger SP 570 NorthStar Edition 2022+
Polaris Ranger Crew SP 570 2022+
Polaris Ranger Crew SP 570 Premium 2022+
Polaris Ranger Crew SP 570 NorthStar Edition 2022+

Application note: Plug-and-play wiring requires a bus bar. Machines without a bus bar require modifications.


FAQ

1. What does Ready-Fit change about installation?

It reduces component assembly by pairing the application-specific hardware with a prewired winch arrangement. It does not remove the need to fasten the mount, finish the electrical connections, and test operation.

2. What capacity is included?

This application is supplied with a 4,500 lb. winch. Size the complete recovery system for the loaded machine and expected conditions, not just its empty vehicle weight.

3. What installation detail should I address first?

Plug-and-play wiring requires a bus bar. Machines without a bus bar require modifications.

4. How should I look after the synthetic rope?

Keep the rope clean and inspect it for cuts, abrasion, and heat damage. Protect it where it could touch rough surfaces and replace damaged rope before using the winch.

5. Does prewiring mean the winch can run continuously?

No. Recovery winches are used intermittently. Stop if the motor stalls or overheats and follow the operating manual’s pull and cool-down limits.


Tech Insight

Think of the installation as one load path: rope, fairlead, winch, mounting plate, and chassis. A clean fit at every connection matters more than adding capacity at only one component. Route the leads so suspension movement and steering do not pull on terminals or rub through insulation.