Skip to product information
1 of 8

SuperATV

Polaris Ranger 1000 Ready-Fit Winch

Polaris Ranger 1000 Ready-Fit Winch

SKU:QWM-P-RAN1K-6000

Regular price $567.95
Regular price Sale price $567.95
Sale Sold out
Shipping calculated at checkout.
Quantity
  • 4,500 lb. or 6,000 lb.; selected configuration rated line pull
  • Mount Material: 3/16-inch steel
  • Controls: Wired rocker switch and wireless remote
  • Motor: 12V permanent-magnet DC; 1.3 HP for 4,500 lb.; 1.9 HP for 6,000 lb
View full details

The SuperATV Polaris Ranger 1000 Ready-Fit Winch pairs a 4,500 lb. or 6,000 lb. Black Ops winch with application-specific mounting and preassembled electrical components. It gives the Polaris Ranger 1000 a controlled recovery tool for times when tire traction alone will not move the machine.

The Ranger 1000 and Ranger XP 1000 use separate application listings. This package follows the Ranger 1000 fitment table below, including its listed Crew applications, so a similar model name is not a substitute for the correct mount.

The 50-foot synthetic rope is easier to carry to an anchor than an equivalent steel line, while the wired rocker switch and wireless remote offer different control positions. Plan the pull before applying power: capacity selection, the mounting structure, and the condition of the recovery points all matter.

Includes:

  • Black Ops winch in the selected 4,500 lb. or 6,000 lb. capacity
  • 50-foot synthetic winch rope
  • Preassembled solenoid and application-specific wiring
  • Wireless remote and wired rocker switch
  • Winch hook, pull strap, and rope stopper
  • Vehicle-specific 3/16-inch steel mounting plate
  • Aluminum hawse fairlead
  • Installation hardware

Specifications
Manufacturer SuperATV
Product Type Ready-Fit Recovery Winch Kit
Part Number(s) QWM-P-RAN1K-6000, QWM-P-RAN1K-4500
Rated Line Pull 4,500 lb. or 6,000 lb.; selected configuration
Motor 12V permanent-magnet DC; 1.3 HP for 4,500 lb.; 1.9 HP for 6,000 lb.
Rope 50-foot synthetic
Mount Material 3/16-inch steel
Controls Wired rocker switch and wireless remote
Published Remote Range Up to 50 feet
Assembly Prewired solenoid; vehicle-specific installation
Primary Application UTV vehicle recovery

Available configurations:

Part Number Selection
QWM-P-RAN1K-6000 Winch Size: 6000 lb. Winch
QWM-P-RAN1K-4500 Winch Size: 4500 lb. Winch

Fitment
Make Model / Submodel Year Range
Polaris Ranger 1000 2020+
Polaris Ranger 1000 Crew 2020+
Polaris Ranger 1000 Waterfowl Edition Crew 2021+
Polaris Ranger 1000 Big Game Edition Crew 2021+

FAQ

1. What does Ready-Fit change about installation?

It reduces component assembly by pairing the application-specific hardware with a prewired winch arrangement. It does not remove the need to fasten the mount, finish the electrical connections, and test operation.

2. Which capacity should I select?

This listing offers 4,500 lb. and 6,000 lb. options. Choose for the loaded machine and expected recovery resistance; a higher line-pull rating does not raise the rating of the mount or recovery points.

3. What installation detail should I address first?

The supplied mount is intended for the models and years in the table. Final mounting, power connections, cable routing, and control placement are still required; follow the instructions for the selected kit.

4. How should I look after the synthetic rope?

Keep the rope clean and inspect it for cuts, abrasion, and heat damage. Protect it where it could touch rough surfaces and replace damaged rope before using the winch.

5. Does prewiring mean the winch can run continuously?

No. Recovery winches are used intermittently. Stop if the motor stalls or overheats and follow the operating manual’s pull and cool-down limits.


Tech Insight

Think of the installation as one load path: rope, fairlead, winch, mounting plate, and chassis. A clean fit at every connection matters more than adding capacity at only one component. Route the leads so suspension movement and steering do not pull on terminals or rub through insulation.