

The SuperATV Polaris General XP 1000 Heavy-Duty Axle - Rhino 2.0 is a complete CV axle for Polaris General XP 1000 in the listed configurations. Its heat-treated 4340 chromoly construction and enlarged shaft and CV components provide a stronger foundation for trail use and loaded driveline conditions.
A CV axle carries drive from the differential to the wheel while its joints accommodate suspension movement and steering on front applications. For a repair, identify the axle position and vehicle configuration before choosing a replacement. A shared model name does not make front, rear, left, and right assemblies interchangeable.
During installation, inspect the boots, clamps, splines, and mating components. After assembly, verify that the axle clears nearby components and moves freely through the suspension range; use the vehicle and axle installation instructions for fasteners and service procedures.
Includes:
- (1) Rhino 2.0 CV axle assembly in the selected configuration
Specifications
| Manufacturer | SuperATV |
|---|---|
| Product Type | CV Axle |
| Axle Series | Rhino 2.0 |
| Material | Heat-treated 4340 chromoly steel |
| Application | Vehicle and position-specific |
| Design | Enlarged shaft and CV components |
| Heat Treatment | Manufacturer-specific heat treatment |
| Part Number | See the configuration table below |
| Part Number | Axle Location |
|---|---|
| AX01-005F0#GEN | Front |
| AX-1-94-R-0-DT | Rear |
Fitment
| Make | Model | Year Range |
|---|---|---|
| Polaris | General XP 1000 | 2020+ |
| Polaris | General XP 4 1000 | 2020+ |
Application Notes:
- Not compatible with Anti-Lock Brake Systems (ABS)
OEM Reference:
- Replaces OEM Part #:
- Front : 1334269
- Rear : 1334268
FAQ
1. What does this axle replace?
It replaces one CV axle assembly in the selected position for the listed Polaris General XP 1000 applications. The part-number table identifies the available configurations; each selection is one axle, not a full vehicle set.
2. Does this axle work with a lift or long travel kit?
Do not assume an axle fits every suspension modification. Changes to A-arms, trailing arms, radius rods, track width, or ride height can change the required axle length and CV angle.
3. Why do the CV boots matter?
The boots retain joint grease and help keep water and grit out. Torn rubber, a loose clamp, or thrown grease warrants inspection before contamination damages the joint.
4. Does a stronger axle solve binding or clicking?
No. Investigate the cause, including damaged joints, insufficient clearance, incorrect axle length, or suspension geometry. Stronger shaft material does not correct a mechanical interference problem.
5. What should I inspect after installation?
Verify proper axle seating, boot and clamp condition, and clearance through the suspension range. Follow the vehicle service manual and axle instructions for fastener tightening and any model-specific installation work.