



The SuperATV Polaris General 1000 Transmission Case gives a transmission rebuild a reinforced cast-aluminum housing with added material around the snorkel tube and axle-output areas. Extra ribs and gussets support those loaded sections, making this a useful replacement when the original housing is damaged or the build calls for a stronger case.
Treat the housing as the foundation of the rebuild. A new case does not replace worn gears, shafts, or bearings, and those parts need inspection before they go back in. Select the correct side or complete-case option for your application, then follow the assembly procedure for bearing installation, clearances, sealing, and fastener torque. General 4 complete-case and individual-half year ranges differ; see Fitment.
Includes:
- Selected transmission case half or complete housing
- Fill plug and solenoid plug with the left-side package
- Linkage plate, vent tube, shifter shim, and drain plug with the right-side package
- Blue threadlocker
- Required seals for the selected package
Specifications
| Manufacturer / Brand | SuperATV |
|---|---|
| Part Number / SKU | Varies by selected configuration; see table below |
| Product Type | Replacement transmission housing; not a complete transmission |
| Material | Cast aluminum |
| Reinforcement | Added ribs, gussets, and material at snorkel tube and axle outputs |
| Options | Left half, right half, or complete case |
| Gearset / Shafts | Not included as an assembled transmission |
| Installation | Transmission disassembly and reassembly required |
Fitment
Complete Transmission Case
| Make | Model | Year Range |
|---|---|---|
| Polaris | General 1000 | 2016+ |
| Polaris | General 4 1000 | 2017+ |
Right or Left Case Half
| Make | Model | Year Range |
|---|---|---|
| Polaris | General 1000 | 2016+ |
| Polaris | General 4 1000 | 2020+ |
Available configurations: Each row below is one selectable package; features and reductions apply to that package.
| Part Number / SKU | Select Transmission Options |
|---|---|
| TMC01-001R#AH | Right |
| TMC01-001L#AD | Left (Snorkel Side) |
| TMC01-001-K#AE | Complete Transmission Case |
FAQs
1. Does this include the transmission internals?
This listing is for the housing package and the listed installation items. It is not a complete assembled transmission with gears and shafts.
2. Can I replace just one side?
Individual halves are offered for the listed applications. Use the side and year restrictions in the fitment section; complete-case fitment does not automatically establish single-half compatibility.
3. Where is the case reinforced?
The design adds material around the snorkel tube and axle-output areas, with additional ribs and gussets supporting the housing.
4. Should bearings and seals be inspected during the swap?
Yes. Inspect bearing seats, rotating parts, and sealing surfaces before reassembly. A damaged shaft surface can compromise a new seal, and debris from the original failure must be removed.
5. Is this a straightforward bolt-on repair?
It is an internal transmission rebuild, so correct setup matters. Professional installation is recommended when you do not have the service information and tools needed to assemble the gearbox accurately.