Skip to product information
1 of 1

King Shocks

King PR 2.0 x 6 in. Emulsion Coilover Shock

King PR 2.0 x 6 in. Emulsion Coilover Shock

SKU:PR2006-CONR

Regular price $418.95
Regular price Sale price $418.95
Sale Sold out
Shipping calculated at checkout.
Quantity
  • 6 in nominal shock travel
  • Shock Type: Emulsion Coilover
  • 2.0 in shock body
  • 7/8 in shaft diameter
View full details

The King PR 2.0 x 6 in. Emulsion Coilover Shock puts the spring and damper in one compact package without an external reservoir. With a 2.0-inch nominal body and 6 inches of nominal travel, this shock gives you the dimensions to start laying out your mounts. Choose it from the space and suspension movement you actually have, then select springs for the weight the corner will carry.

The emulsion layout suits builds where a simple package matters; weigh your terrain and sustained use against a reservoir shock before deciding. Coil springs are sold separately, so rates and lengths can be chosen for your build rather than forcing the suspension around a spring that happens to be on hand.

Includes:

  • (1) King PR 2.0 x 6 in. Emulsion Coilover Shock

Note: Coil springs are sold separately. Match springs to the shock and spring hardware before ordering.


Specifications
Specification Details
Manufacturer King Shocks
Part Number PR2006-CONR
Series PR
Shock Type Emulsion Coilover
Nominal Body Size 2.0 in.
Nominal Travel 6 in.
Reservoir None; emulsion design
Coil Springs Sold separately
Shaft Diameter 7/8 in.
King Listed Stroke (in.) 6
King Listed Gas Pressure (PSI) 100
Extended Length (in.) 19.079
Compressed Length (in.) 13.049
Quantity Individual

Fitment
Application Details
Application Universal custom suspension; fabrication required
Vehicle Fit Selected by suspension measurements, not year/make/model
Typical Builds Custom tube chassis, trail rigs, buggies, and fabricated coilover conversions

Fitment Notes:

  • Cycle the suspension from full bump to full droop before finalizing the mounts. Include axle articulation and steering lock where applicable.
  • Match the mounting width, bolt size, and available compressed and extended lengths to the selected shock.
  • Use bump stops and limit straps to keep the shock from becoming the suspension travel stop.
  • Choose spring rates and lengths for the supported weight, mounting angle, and motion ratio. Tire size alone does not establish a spring rate.

FAQs

Are coil springs included?

No. This listing is for the shock configuration without coil springs. Choose spring length, inside diameter, and rate for the shock hardware and supported vehicle weight.

How do I choose the right travel?

Cycle the suspension and measure the distance between the proposed shock mounts at full bump and droop. Match those measurements to the published lengths, with room for the bump stops and limit straps to do their jobs.

Can I use spring preload to correct the wrong spring rate?

Preload helps set ride height, but it does not turn an unsuitable spring into the correct rate. Work from the corner weight and suspension leverage, then set preload and crossover position as part of the setup.

When should I consider a reservoir model instead?

Look at how long and how hard the suspension will be working. Repeated rough terrain can build heat quickly; a reservoir layout adds capacity and may make more sense for sustained use.

Will one shock tune work on every build?

No. Weight, mounting angle, suspension leverage, and terrain all affect the damping the vehicle needs. Give the suspension tuner those details instead of selecting a tune by tire size alone.