Skip to product information
1 of 2

King Shocks

King PR 2.5 x 18 in. External Bypass Shock 3-Tube Remote Reservoir

King PR 2.5 x 18 in. External Bypass Shock 3-Tube Remote Reservoir

SKU:PR2518-BP3H-1

Regular price $988.00
Regular price Sale price $988.00
Sale Sold out
Shipping calculated at checkout.
Quantity
  • 3 external bypass tubes
  • Remote Reservoir
  • 18 in nominal shock travel
  • Shock Type: External Bypass
View full details

The King PR 2.5 x 18 in. External Bypass Shock 3-Tube Remote Reservoir gives a custom suspension 18 inches of nominal shock travel and 3 external bypass tubes. Use it when you need to tune how the suspension reacts at different points in the stroke, from smaller trail chatter to deeper hits. The 2.5-inch body belongs in a suspension package sized for the vehicle's weight, speed, and terrain.

A remote reservoir gives you freedom to place the reservoir where it clears the chassis and has room to shed heat. This is a damper, so your build still needs a separate spring system to carry the vehicle. Start with the right shock length and mounting position, then work on valving and bypass settings.

Includes:

  • (1) King PR 2.5 x 18 in. External Bypass Shock 3-Tube Remote Reservoir
  • Remote reservoir and connecting hose

Specifications
Specification Details
Manufacturer King Shocks
Part Number PR2518-BP3H-1
Series PR
Shock Type External Bypass
Nominal Body Size 2.5 in.
Nominal Travel 18 in.
Reservoir Remote Reservoir
External Bypass Tubes 3
King Listed Stroke (in.) 18
King Listed Gas Pressure (PSI) 150
Extended Length (in.) 45.972
Compressed Length (in.) 27.971
Bypass Layout Style 1
Quantity Individual

Fitment
Application Details
Application Universal custom suspension; fabrication required
Vehicle Fit Selected by suspension measurements, not year/make/model
Typical Builds Custom race trucks, prerunners, rock rigs, and tube chassis with a separate spring system

Fitment Notes:

  • Cycle the suspension from full bump to full droop before finalizing the mounts. Include axle articulation and steering lock where applicable.
  • Match the mounting width, bolt size, and available compressed and extended lengths to the selected shock.
  • Use bump stops and limit straps to keep the shock from becoming the suspension travel stop.
  • Leave room for the remote reservoir and route the hose away from exhaust heat, sharp edges, and moving parts.
  • Mock up the bypass tubes and adjusters with the wheels, tires, links, and chassis in place. Different tube layouts require different clearance.

FAQs

Does this bypass shock support the weight of the vehicle?

No. Plan on a coilover, leaf spring, torsion bar, or another suitable spring system to carry the vehicle. The bypass shock controls suspension movement.

What does the tube count tell me?

This version has 3 external bypass tubes. Tube placement determines which portions of the stroke they affect. More tubes give additional tuning zones, but tube count alone does not tell you how the shock will feel on your vehicle.

How should I start tuning the bypass?

Start with a recorded baseline and change one setting at a time on the same stretch of terrain. Note whether the problem occurs on small bumps, deeper compression, or rebound so you are adjusting the zone that needs attention.

Can I choose travel from tire size or lift height?

Measure the suspension at full bump and full droop. Shock travel and wheel travel are often different, and the chassis still needs enough room for the shock body, reservoir, tubes, and mounts.

Will this bolt into factory shock mounts?

Treat it as a custom suspension component. The mounting points, bolt sizes, clearances, and operating lengths must all match the build; the nominal size does not establish direct vehicle fitment.