
The King PR 3.0 x 16 in. Internal Bypass Coilover Shock Remote Reservoir combines coil-spring support with damping that changes through the stroke. With a 3.0-inch nominal body and 16 inches of nominal travel, this shock gives you the dimensions to start laying out your mounts. Choose it from the space and suspension movement you actually have, then select springs for the weight the corner will carry.
Internal bypass adds position-sensitive damping inside the shock body, keeping external bypass tubes out of the packaging plan. The remote reservoir can be mounted separately to make room around the coilover and manage heat. Coil springs are sold separately, so rates and lengths can be chosen for your build rather than forcing the suspension around a spring that happens to be on hand.
Includes:
- (1) King PR 3.0 x 16 in. Internal Bypass Coilover Shock Remote Reservoir
- Remote reservoir and connecting hose
Note: Coil springs are sold separately. Match springs to the shock and spring hardware before ordering.
Specifications
| Specification | Details |
|---|---|
| Manufacturer | King Shocks |
| Part Number | PR3016-COHR-I |
| Series | PR |
| Shock Type | Internal Bypass Coilover |
| Nominal Body Size | 3.0 in. |
| Nominal Travel | 16 in. |
| Reservoir | Remote Reservoir |
| Coil Springs | Sold separately |
| King Listed Stroke (in.) | 16 |
| Factory Options | Internal Bypass |
| King Listed Gas Pressure (PSI) | 150 |
| Extended Length (in.) | 42.199 |
| Compressed Length (in.) | 26.2 |
| Quantity | Individual |
Fitment
| Application | Details |
|---|---|
| Application | Universal custom suspension; fabrication required |
| Vehicle Fit | Selected by suspension measurements, not year/make/model |
| Typical Builds | Custom tube chassis, trail rigs, buggies, and fabricated coilover conversions |
Fitment Notes:
- Cycle the suspension from full bump to full droop before finalizing the mounts. Include axle articulation and steering lock where applicable.
- Match the mounting width, bolt size, and available compressed and extended lengths to the selected shock.
- Use bump stops and limit straps to keep the shock from becoming the suspension travel stop.
- Leave room for the remote reservoir and route the hose away from exhaust heat, sharp edges, and moving parts.
- Choose spring rates and lengths for the supported weight, mounting angle, and motion ratio. Tire size alone does not establish a spring rate.
FAQs
Are coil springs included?
No. This listing is for the shock configuration without coil springs. Choose spring length, inside diameter, and rate for the shock hardware and supported vehicle weight.
How do I choose the right travel?
Cycle the suspension and measure the distance between the proposed shock mounts at full bump and droop. Match those measurements to the published lengths, with room for the bump stops and limit straps to do their jobs.
Can I use spring preload to correct the wrong spring rate?
Preload helps set ride height, but it does not turn an unsuitable spring into the correct rate. Work from the corner weight and suspension leverage, then set preload and crossover position as part of the setup.
What does internal bypass add?
It changes damping through different portions of the stroke inside the shock. You still need the correct spring rates and base valving; internal bypass is another part of the setup, not a substitute for them.
Will one shock tune work on every build?
No. Weight, mounting angle, suspension leverage, and terrain all affect the damping the vehicle needs. Give the suspension tuner those details instead of selecting a tune by tire size alone.