






The Kawasaki Teryx Mega Keller Ball Joints use a two-piece threaded housing to retain the joint in the A-arm without an OEM-style snap ring. They provide a serviceable connection between the A-arm and steering knuckle for the applications listed below.
The Mega design uses enlarged studs and housings for builds that need additional joint capacity. These joints require A-arm modification, so plan that work before installation. The adjustable, greaseable design lets you service the joint rather than treating it as a sealed replacement.
Includes:
- Keller ball joint(s) in the selected quantity and configuration.
Specifications
| Manufacturer | SuperATV |
|---|---|
| Design | Two-piece threaded housing; no OEM-style snap ring |
| Material | Hardened chromoly steel components |
| Service | Adjustable, rebuildable and greaseable |
| Installation | A-arm modification required |
| Construction | Enlarged studs and housings |
| Quantity options | 1 Ball Joint; 2 Ball Joints; 4 Ball Joints |
| Part numbers | BJKM-K-MTUL; BJKM-K-MTUL-K-2; BJKM-K-MTUL-K-4 |
Fitment
| Make | Model / Configuration | Year Range |
|---|---|---|
| Kawasaki | Teryx 750 | 2008-2013 |
| Kawasaki | Teryx 4 750 | 2012-2013 |
| Kawasaki | Teryx 800 | 2014+ |
| Kawasaki | Teryx 4 800 | 2014+ |
| Kawasaki | Teryx S | 2021+ |
| Kawasaki | Teryx 4 S | 2021+ |
NOTE: Mega ball joints require modification of your A-arms
FAQs
1. How are these retained in the A-arm?
The joint body presses into the arm and the housing threads onto the back, capturing the arm without an OEM-style snap ring.
2. Can these ball joints be serviced?
Yes. The listed Keller design is greaseable, adjustable and rebuildable. Follow the instructions for your exact joint when setting tension and lubricating it.
3. What quantity and location should I order?
Use the available product options to select the quantity and position. Upper and lower joints are application-specific; match the joint to the location being repaired.
4. Do Mega Keller joints require A-arm modification?
Yes. Mega ball joints require modification of the A-arm. They should not be treated as a direct press-in replacement for an unmodified arm.