

The FOX Factory Race 3.0" x 14" 3-Tube External Bypass Shock with Piggyback Reservoir (Right) brings position-sensitive damping to a custom off-road suspension. This right-hand version uses a 3.0-inch body, 14 inches of nominal shock travel, and three external bypass tubes. The attached reservoir keeps the shock and reservoir together, making its complete footprint part of the shock-tower layout.
External bypass adjustment lets a builder work on how the suspension responds in different parts of its travel. That matters when the same rig needs to settle over smaller trail chop and control deeper compression over bigger hits. Plan the ride-height position and full-travel clearances first, with room to reach the adjusters once the shock is installed.
Includes:
- (1) FOX Factory Race 3.0" x 14" 3-Tube External Bypass Shock, Right-hand, with piggyback reservoir — 981-30-403-R
Specifications
| Manufacturer | FOX |
|---|---|
| Part Number | 981-30-403-R |
| Series | Factory Race |
| Product Type | External Bypass Shock |
| Nominal Body Size | 3.0" |
| Nominal Shock Stroke | 14" |
| External Bypass Tubes | 3 |
| Reservoir Configuration | Piggyback Reservoir |
| Handed Configuration | Right-hand |
| Damping Adjustment | External bypass adjustment; position-sensitive damping |
| Mounts | Upper and lower eyelets |
| Spring Requirement | Separate spring system required |
| Quantity | Sold individually |
Fitment
| Application | Fitment Details |
|---|---|
| Vehicle Application | Custom off-road and race chassis with fabricated shock mounts |
| Vehicle-Specific Fitment | No make, model, or year-specific bolt-on application |
| Required Configuration | Right-hand, 3.0" body, 14" nominal stroke, 3-tube, piggyback reservoir |
Builder Note: Lay out the eyelet spacing at full bump and droop, then cycle the suspension for tube clearance, articulation, and the attached piggyback reservoir. Choose the handed layout to suit the chassis; front or rear placement depends on the build.
FAQs
1. What does the 3-tube bypass layout do?
The external tubes provide adjustable oil paths around the piston. Their placement creates different damping zones through the stroke, so tuning can address how the suspension moves in those zones.
2. What changes with a piggyback reservoir?
The reservoir is attached to the shock instead of mounted separately on a hose. Include it when laying out the tower; clearance around the main body alone is not enough.
3. What does the Right-hand designation mean?
It identifies the handed tube and reservoir layout. On a fabricated chassis, choose the orientation that clears nearby components and keeps the adjusters accessible; do not assume the label alone establishes a front or rear application.
4. Does this shock replace a coilover or spring?
It provides damping, not the spring system that carries the vehicle. Use it with a properly selected coilover, coil spring, leaf spring, or other separate spring arrangement.
5. Is 14 inches the amount of wheel travel?
No. The 14-inch figure describes nominal shock stroke. Wheel travel depends on the mounting location, angle, and suspension geometry. Plan bump stops and limit straps so the shock is not the suspension travel stop.