Skip to product information
1 of 1

FOX

Fox Factory Race 3.0" x 16" External Bypass Shock 3-Tube Piggyback Reservoir (Right)

Fox Factory Race 3.0" x 16" External Bypass Shock 3-Tube Piggyback Reservoir (Right)

SKU:981-30-404-R

Regular price $1,614.95
Regular price Sale price $1,614.95
Sale Sold out
Shipping calculated at checkout.
Quantity
  • Position-sensitive bypass damping controls different zones of shock travel
  • 3 external bypass tubes
  • Piggyback Reservoir
  • 16" nominal shock travel
View full details

The FOX Factory Race 3.0" x 16" 3-Tube External Bypass Shock with Piggyback Reservoir (Right) brings position-sensitive damping to a custom off-road suspension. This right-hand version uses a 3.0-inch body, 16 inches of nominal shock travel, and three external bypass tubes. The attached reservoir keeps the shock and reservoir together, making its complete footprint part of the shock-tower layout.

External bypass adjustment lets a builder work on how the suspension responds in different parts of its travel. That matters when the same rig needs to settle over smaller trail chop and control deeper compression over bigger hits. Plan the ride-height position and full-travel clearances first, with room to reach the adjusters once the shock is installed.

Includes:

  • (1) FOX Factory Race 3.0" x 16" 3-Tube External Bypass Shock, Right-hand, with piggyback reservoir — 981-30-404-R

Specifications
Manufacturer FOX
Part Number 981-30-404-R
Series Factory Race
Product Type External Bypass Shock
Nominal Body Size 3.0"
Nominal Shock Stroke 16"
External Bypass Tubes 3
Reservoir Configuration Piggyback Reservoir
Handed Configuration Right-hand
Damping Adjustment External bypass adjustment; position-sensitive damping
Mounts Upper and lower eyelets
Spring Requirement Separate spring system required
Quantity Sold individually

Fitment
Application Fitment Details
Vehicle Application Custom off-road and race chassis with fabricated shock mounts
Vehicle-Specific Fitment No make, model, or year-specific bolt-on application
Required Configuration Right-hand, 3.0" body, 16" nominal stroke, 3-tube, piggyback reservoir

Builder Note: Lay out the eyelet spacing at full bump and droop, then cycle the suspension for tube clearance, articulation, and the attached piggyback reservoir. Choose the handed layout to suit the chassis; front or rear placement depends on the build.


FAQs

1. What does the 3-tube bypass layout do?

The external tubes provide adjustable oil paths around the piston. Their placement creates different damping zones through the stroke, so tuning can address how the suspension moves in those zones.

2. What changes with a piggyback reservoir?

The reservoir is attached to the shock instead of mounted separately on a hose. Include it when laying out the tower; clearance around the main body alone is not enough.

3. What does the Right-hand designation mean?

It identifies the handed tube and reservoir layout. On a fabricated chassis, choose the orientation that clears nearby components and keeps the adjusters accessible; do not assume the label alone establishes a front or rear application.

4. Does this shock replace a coilover or spring?

It provides damping, not the spring system that carries the vehicle. Use it with a properly selected coilover, coil spring, leaf spring, or other separate spring arrangement.

5. Is 16 inches the amount of wheel travel?

No. The 16-inch figure describes nominal shock stroke. Wheel travel depends on the mounting location, angle, and suspension geometry. Plan bump stops and limit straps so the shock is not the suspension travel stop.