


The Eibach ERS Linear Main Springs - 2.5 in ID are individually sold coilover springs for suspension systems using matching inside-diameter spring seats. The length and rate options let a builder select the spring around the available mounting space and suspension setup.
The ERS linear spring design provides a consistent nominal spring rate through its working range. Eibach tests each spring individually. Match the free length, installed height and available spring deflection to the damper and spring hardware before setting preload.
Includes:
- (1) selected spring
Specifications
| SKU | Free Length (in) | Seating Diameter | Rate (lb/in) | Block Height (in) | Spring Deflection (in) |
|---|---|---|---|---|---|
| 0800.250.0150 | 8.00 | 2.50 I.D. | 150 | 2.55 | 5.45 |
| 1000.250.0325 | 10.00 | 2.50 I.D. | 325 | 3.94 | 6.06 |
| 1200.250.0250 | 12.00 | 2.50 I.D. | 250 | 4.43 | 7.57 |
| 1400.250.0300 | 14.00 | 2.50 I.D. | 300 | 5.81 | 8.19 |
Spring deflection is the manufacturer’s spring compression-travel figure. It is not damper stroke, wheel travel or a vehicle load rating. Account for preload and the installed spring stack.
Fitment
| Fitment | Requirement |
|---|---|
| Vehicle Make | Universal/Custom |
| Vehicle Model | Universal/Custom |
| Application | Match spring seating diameter, free length, installed height, spring rate and compression clearance to the suspension hardware. |
FAQs
Are these sold as a pair?
No. Each SKU supplies one spring. A stacked two-spring coilover uses two springs per damper, with the required coupling and crossover hardware supplied separately.
Does spring length mean shock travel?
No. Free length is measured with the spring unloaded. The spring deflection figure, damper stroke and wheel travel are different measurements.
How do I choose the spring rate?
Use the supported vehicle weight, suspension motion ratio, installed spring height and intended use. For stacked springs, account for both active springs and the crossover setup.
What must match the spring hardware?
The specified seating diameter and end arrangement must suit the spring seats. Check the full outside profile, installed length and compression clearance before setting preload.