
The SuperATV Front Differential Seal Kit for Can-Am Outlander replaces the seals at both front axle openings and the differential input. A wet housing or oil collecting around one of those openings is a reason to inspect the seal before lubricant loss or contamination turns a smaller repair into differential work. The kit includes two 25 mm ID axle hub seals and one input shaft seal.
SuperATV specifies double-lipped seals for this kit and lists it for compatible OEM and SwifTrac front differentials. The extra sealing lip is useful where an Outlander sees mud, water, and trail grit, but a new seal still needs a sound surface to run against. Check the axle and input sealing surfaces for grooves or damage, identify which opening is leaking, and confirm your differential and seal dimensions before installation.
Includes:
- (2) 25 mm ID axle hub seals
- (1) Input shaft seal
Specifications
| Manufacturer | SuperATV |
|---|---|
| Part Number | DIFF-CA-MAV-SK1#OUT |
| Product Type | Front Differential Seal Kit |
| Seal Design | Double-lipped |
| Axle Hub Seal Inside Diameter | 25 mm |
| Sealing Locations | Two axle openings and one input shaft opening |
| Differential Compatibility | Compatible OEM and SuperATV SwifTrac front differentials, per SuperATV |
| Primary Application | Can-Am Outlander front differential seal service |
Fitment
| Make | Model / Application | Year Range |
|---|---|---|
| Can-Am | Outlander with a compatible front differential | 2004+ |
Fitment Note: Outlander front differential configurations vary by model and year. Confirm your exact model, differential type, and 25 mm axle hub seal inside diameter before ordering. The year range alone does not confirm seal fitment.
FAQ
1. Which seals are included?
The kit contains two 25 mm ID axle hub seals and one input shaft seal for the front differential.
2. Does this kit fit a SuperATV SwifTrac differential?
SuperATV lists the kit as compatible with its SwifTrac front differential as well as compatible OEM front differentials. Confirm the seal dimensions on the differential being serviced.
3. Is a leak always caused by a worn seal?
No. Clean the housing and locate the source of the leak first. Inspect the surface the seal runs against and check for damage or movement that could cause a new seal to leak again.
4. Should I check the differential fluid while repairing a leak?
Yes. Check the fluid level and condition, and follow the service procedure for your exact Outlander when refilling. Can-Am recommends more frequent front differential fluid service for machines used in mud, dust, or other demanding conditions.
5. Is this a differential rebuild kit?
No. It supplies the three listed external seals. It does not include gears, bearings, or a replacement differential.