Skip to product information
1 of 7

SuperATV

Can-Am Defender HD8 Track Bars

Can-Am Defender HD8 Track Bars

SKU:TBR-CA-DEF-02#AB

Regular price $473.95
Regular price Sale price $473.95
Sale Sold out
Shipping calculated at checkout.
Quantity
  • Bars made of 1.5” x 0.118” wall steel DOM tubing construction
  • A forward shifted wheel, larger tire, or portal increases the leverage seen by the arms and mounts
  • The SuperATV Track Bars for Can-Am Defender HD8 brace the front suspension when the vehicle is fitted with the compatible Atlas Pro BFT setup
  • These bars add a separate load path between the suspension and frame
View full details

The SuperATV Track Bars for Can-Am Defender HD8 brace the front suspension when the vehicle is fitted with the compatible Atlas Pro BFT setup. A forward shifted wheel, larger tire, or portal increases the leverage seen by the arms and mounts. These bars add a separate load path between the suspension and frame.

The joints must move freely through suspension travel. After installation, cycle the suspension and steering to check that the bars clear the tire, axle, brake hose, and frame at full droop and compression. Inspect the mounts and fasteners after a hard impact.


Specifications
Manufacturer SuperATV
Part Number TBR-CA-DEF-02#AB
Product Type Track Bars
Position Front suspension
Construction Bars made of 1.5” x 0.118” wall steel DOM tubing
Primary Application Can-Am Defender HD8 suspension reinforcement

Fitment
Make Model Year Range
Can-Am Defender HD 8 2016–2021
Can-Am Defender HD 8 DPS 2016–2021
Can-Am Defender HD 8 XT 2016–2021
Can-Am Defender HD 8 XT Cab 2016–2021
Can-Am Defender MAX HD 8 2017–2021
Can-Am Defender MAX HD 8 DPS 2017–2021
Can-Am Defender MAX HD 8 XT 2017–2021
Can-Am Defender MAX HD 8 XT Cab 2017–2021

Fitment notes: Compatible with SuperATV’s Atlas Pro BFT Suspension Kit only for the above models. Some drilling required.


WOD Builder Take

Track bars support a matched suspension assembly; they do not substitute for inspecting A-arm bushings, frame brackets, or alignment.


FAQ

1. Will these work with stock arms?

These track bars are intended for the specified Atlas Pro BFT suspension kit. Do not assume stock-arm compatibility.

2. Does the kit require drilling?

Follow the kit installation instructions and the fitment notes below; some applications require drilling.

3. What should I inspect after a hit?

Check the frame mount, rod ends, bar clearance, and mounting fasteners before the next ride.