






The SuperATV BFT Suspension Kit for Can-Am Defender HD8 packages forward offset A-arms, high-clearance arm bends, and lift components for a larger tire setup. The arm offset moves the front wheel forward to create space at the rear of the wheel opening; the arm profile helps avoid contact with ruts and trail obstacles.
The offset and lift change several clearances at once. Cycle the suspension and steering to inspect the CV axle, brake line, tie rod, fender, and tire at full lock and compression. Recheck camber and toe after installation. Tire claims depend on the complete wheel, tire, and vehicle setup.
Includes:
- Upper and lower front A-arms
- Steering stop kit
- 17” Limit straps (Not needed if running Rhino 2.0 Axles)
- Spring spacers
- Shock brackets
- Shock bump stop (Required only for 34” tires)
Specifications
| Manufacturer | SuperATV |
|---|---|
| Part Number | AA-CA-DEF-2-HC-BSD-02#AA |
| Product Type | BFT Suspension Kit |
| Position | Front suspension |
| Construction | Made with 1-1/4” diameter DOM steel tubing |
| Tire Guidance | Fit 34” tires with minimal lift |
| Joint / Adjustment | Pivot blocks pre-adjusted to factory length |
| Primary Application | Can-Am Defender HD8 suspension arm upgrade |
Fitment
| Make | Model | Year Range |
|---|---|---|
| Can-Am | Defender HD 8 | 2016–2021 |
| Can-Am | Defender HD 8 DPS | 2016–2021 |
| Can-Am | Defender HD 8 XT | 2016–2021 |
| Can-Am | Defender HD 8 XTP | 2018–2021 |
| Can-Am | Defender MAX HD 8 | 2017–2021 |
| Can-Am | Defender MAX HD 8 DPS | 2017–2021 |
| Can-Am | Defender MAX HD 8 XT | 2017–2021 |
Fitment note: Match the selected kit to the exact model, year, trim, and seating configuration.
WOD Builder Take
A bent lower arm improves clearance at the arm; the lift components change the vehicle ride height. Those are distinct measurements and should not be added together as a single guaranteed gain.
FAQ
1. What is included in the BFT approach?
The suspension kit combines A-arm geometry with lift components; use the selected kit inventory and installation instructions for the exact contents.
2. Will a larger tire always clear?
Wheel offset, tire profile, trim, and compression travel affect clearance. Cycle the installed setup.
3. Should I align the vehicle afterward?
Yes. Check camber and toe using the vehicle service procedure after the suspension is assembled.