






The SuperATV Track Bars for Can-Am Defender HD10 brace the front suspension when the vehicle is fitted with the compatible Atlas Pro BFT setup. A forward shifted wheel, larger tire, or portal increases the leverage seen by the arms and mounts. These bars add a separate load path between the suspension and frame.
The joints must move freely through suspension travel. After installation, cycle the suspension and steering to check that the bars clear the tire, axle, brake hose, and frame at full droop and compression. Inspect the mounts and fasteners after a hard impact.
Specifications
| Manufacturer | SuperATV |
|---|---|
| Part Number | TBR-CA-DEF-02#AD |
| Product Type | Track Bars |
| Position | Front suspension |
| Construction | Bars made of 1.5” x 0.118” wall steel DOM tubing |
| Primary Application | Can-Am Defender HD10 suspension reinforcement |
Fitment
| Make | Model | Year Range |
|---|---|---|
| Can-Am | Defender HD 10 | 2016+ |
| Can-Am | Defender HD 10 6x6 | 2020+ |
| Can-Am | Defender HD 10 DPS | 2016+ |
| Can-Am | Defender HD 10 Limited | 2020+ |
| Can-Am | Defender HD 10 Mossy Oak | 2018+ |
| Can-Am | Defender HD 10 Pro | 2020+ |
| Can-Am | Defender HD 10 XMR | 2018+ |
| Can-Am | Defender HD 10 XT | 2016+ |
| Can-Am | Defender HD 10 XT Cab | 2016+ |
| Can-Am | Defender HD 10 XTP | 2018+ |
| Can-Am | Defender MAX HD 10 DPS | 2017+ |
| Can-Am | Defender MAX HD 10 Limited | 2020+ |
| Can-Am | Defender MAX HD 10 Lone Star Edition | 2018+ |
| Can-Am | Defender MAX HD 10 XMR | 2019+ |
| Can-Am | Defender MAX HD 10 XT | 2017+ |
| Can-Am | Defender MAX HD 10 XT Cab | 2017+ |
Fitment notes: Compatible with SuperATV’s Atlas Pro 2" Forward Offset A-Arms and Atlas Pro BFT Suspension Kit only. Some drilling required.
WOD Builder Take
Track bars support a matched suspension assembly; they do not substitute for inspecting A-arm bushings, frame brackets, or alignment.
FAQ
1. Will these work with stock arms?
These track bars are intended for the specified Atlas Pro BFT suspension kit. Do not assume stock-arm compatibility.
2. Does the kit require drilling?
Follow the kit installation instructions and the fitment notes below; some applications require drilling.
3. What should I inspect after a hit?
Check the frame mount, rod ends, bar clearance, and mounting fasteners before the next ride.