













The SuperATV 4,500 lb All-in-One Quick Connect Winch Kit combines a Black Ops winch with a steel receiver mount and a pair of quick-connect plugs. It gives a compatible 2-inch receiver a removable winch setup instead of a permanently installed assembly. The included 12-volt winch uses 50 feet of synthetic rope and can be operated with the wireless remote or dash rocker switch.
For a machine that splits time between trail riding and everyday work, a removable winch can be a useful way to organize recovery equipment. The powder-coated receiver tray carries the winch, and the covered plugs simplify disconnecting the power connection. Build the installation around the receiver rating, cable routing, and available clearance so the complete setup suits the load and the vehicle.
Includes:
- (1) 4,500 lb Black Ops winch
- (1) Powder-coated steel mount for a 2-inch receiver
- (1) Pair of quick-connect power plugs with protective covers
- 50-foot synthetic winch rope
- Wireless remote and receiver; wired dash rocker switch
- Winch wiring and solenoid
- Aluminum hawse fairlead and support bracket
- Winch hook kit, hook pull strap, and rope stopper
- Installation hardware
Specifications
| Manufacturer | SuperATV |
|---|---|
| Part Number | 45-WM-P-RAN1K-12KR-K |
| Product Type | Receiver-mounted quick-connect winch kit |
| Rated Line Pull | 4,500 lb |
| Winch Power Supply | 12-volt DC |
| Motor | 1.3 HP permanent-magnet DC |
| Rope | 50-foot synthetic rope |
| Receiver Size | 2 inches |
| Mount Material / Finish | Powder-coated steel |
| Controls | Wireless remote and wired dash rocker switch |
| Power Connection | One pair of covered quick-connect plugs |
Fitment
| Make | Application | Requirements |
|---|---|---|
| Universal | Compatible UTV, truck, or Jeep receiver installation | 2-inch receiver; suitable mounting capacity, clearance, and 12-volt DC wiring |
Fitment Note: A matching receiver opening does not establish recovery capacity. Use the ratings of the complete installation, including the vehicle attachment and recovery equipment.
FAQs
1. Is the winch included, or is this only a receiver tray?
The package includes the 4,500 lb Black Ops winch, receiver mount, quick-connect plugs, and the listed winch accessories. It is not a mount-only listing.
2. Will it work in a front or rear receiver?
Either position can be used when it has a compatible 2-inch receiver, suitable attachment capacity, clearance, and the required power wiring. The receiver location determines the installation.
3. Do the plugs make the winch compatible with 24 or 36 volts?
No. The winch motor requires 12-volt DC power. Do not apply a connector voltage specification to the complete winch assembly.
4. Does a 2-inch receiver guarantee enough capacity?
No. Opening size describes physical fit. The receiver, vehicle attachment, and recovery hardware must also be rated for the intended load.
5. Is the 4,500 lb figure a towing rating?
No. It is rated winch line pull. A winch is used for controlled pulling, and usable pulling force changes with rope layers and recovery conditions.