










The SuperATV Black Ops 3,500 lb. Winch provides powered line pull for a properly mounted vehicle recovery system. The compact 3,500 lb. unit makes sense where mounting room is limited and the loaded machine and recovery conditions suit its rating. Its 3.0 × 4.87-inch bolt pattern differs from the larger Black Ops winches, so measure the mounting plate before planning the installation.
Synthetic rope keeps handling weight down and does not develop steel-wire burrs, but it still needs protection from abrasion and heat. Use gloves and the hook strap when handling the line. A wireless remote is a control option, not permission to stand near a tensioned rope.
Match the entire installation to the job: winch capacity, available space, fairlead alignment, electrical supply, and the strength of the vehicle attachment. The advertised line-pull rating is not a promise that every stuck vehicle of that weight can be recovered in any terrain.
Includes:
- 3,500 lb. Black Ops winch
- 50-foot synthetic rope
- Wireless remote with water-resistant receiver
- Handlebar rocker switch
- Solenoid and power wiring
- Aluminum hawse fairlead
- Winch hook kit, pull strap, and rope stopper
- Installation hardware
- Supplied winch plate; vehicle-specific mounting hardware or bumper still required
Specifications
| Manufacturer | SuperATV |
|---|---|
| Product Type | Black Ops Electric Recovery Winch |
| Part Number(s) | WN-3500 |
| Rated Line Pull | 3,500 lb. |
| Motor | 12V permanent-magnet DC, 1.2 HP |
| Gear Ratio | 166:1 |
| Rope | 50-foot synthetic rope |
| Mounting Bolt Pattern | 3.0 × 4.87 inches (76 × 124 mm) |
| Overall Size (L × W × H) | 12.76 × 4.60 × 4.37 inches |
| Controls | Wired and wireless |
| Published Remote Range | Up to 50 feet |
| Primary Application | Vehicle recovery with a compatible mounting system |
Available configurations:
| Part Number | Selection |
|---|---|
| WN-3500 | Standard package |
Fitment
| Application | Mounting Requirement |
|---|---|
| Universal; not a direct-fit vehicle kit | 3.0 × 4.87 inches (76 × 124 mm) |
| Vehicle attachment | Compatible machine-specific plate or winch-ready bumper, sold separately |
Universal describes the mounting application; it does not guarantee bolt-on fit to every machine. Compare the mounting pattern, envelope dimensions, and fairlead position with the intended mount.
Package note: The supplied plate does not replace the vehicle-specific mount or winch-ready bumper needed to carry recovery loads.
FAQ
1. Will this bolt directly to my vehicle?
Not by capacity rating alone. Use the mounting pattern and dimensions above to match a suitable vehicle mount, leaving clearance for the motor, clutch, fairlead, and wiring.
2. Does the rated pull equal the weight I can always recover?
No. Slope, mud resistance, and an obstructed tire can increase the force needed. Drum layers also affect available pull, so plan the recovery within the complete system’s limits.
3. What changes with the optional package?
The supplied plate does not replace the vehicle-specific mount or winch-ready bumper needed to carry recovery loads.
4. Can synthetic rope be used without inspection?
No. Synthetic line can be damaged by grit, rough edges, heat, or cuts. Inspect it and the fairlead, wear gloves, and keep people clear of the tensioned line.
5. Is this intended for continuous pulling?
No. Use it intermittently and follow the winch manual’s cooling limits. A stalled motor is a reason to stop and reassess the pull, not to keep the switch held down.
Tech Insight
A winch makes its highest rated pull close to the drum core; added rope layers change its leverage. Good rope management and an appropriate anchor location help the system work as intended. Do not use the rope as a tow strap or rely on the winch to secure a transported load.