Skip to product information
1 of 1

SuperATV

Polaris Ranger Seal Kit for SuperATV Front Differentials

Polaris Ranger Seal Kit for SuperATV Front Differentials

SKU:SK-P-002#AB

Regular price $84.95
Regular price Sale price $84.95
Sale Sold out
Shipping calculated at checkout.
Quantity
  • Seal Design: Double-lipped
  • Includes (2) Housing O-rings
  • Primary Application: Polaris Ranger
View full details

The Polaris Ranger Seal Kit for SuperATV Front Differentials is a front-differential service seal package for Polaris Ranger, intended to replace worn hub and input/pinion seals during leak repair or differential service. The listed seals use a double-lipped design to help retain lubricant and keep trail contamination away from the gears and bearings.

This kit is application-specific rather than a generic seal assortment. Use the included seal sizes and differential type shown in the specifications, then match the machine and differential configuration in the fitment section. On Can-Am applications, Smart-Lok and Visco-Lok versions can use different hub-seal sizes, so identify the differential before installation.

Includes:

  • (2) 1.4 mm x 13.3mm ID rubber O-rings
  • (2) 4 mm x 30 mm ID double-lipped shaft seals
  • (3) 7 mm x 30 mm ID double-lipped shaft seals
  • (2) 7 mm x 40 mm ID input seals
  • (2) 7 mm x 40 mm ID double-lipped shaft seals
  • (1) Pinion gear cap O-ring
  • (1) 2 mm x 70 mm ID O-ring
  • (1) 2.5 mm x 75 mm ID O-ring
  • (2) Housing O-rings
  • (1) 2 mm x 175 O-ring

Note: Match the exact differential type and OEM reference before ordering; seal sizes can vary between differential generations.


Specifications
Specification Details
Manufacturer SuperATV
Manufacturer Part Number / SKU (listed option) SK-P-002#AB
Product Polaris Ranger Seal Kit for SuperATV Front Differentials
Primary Application Polaris Ranger
Seal Design Double-lipped
Listed Package Contents (2) 1.4 mm x 13.3mm ID rubber O-rings; (2) 4 mm x 30 mm ID double-lipped shaft seals; (3) 7 mm x 30 mm ID double-lipped shaft seals; (2) 7 mm x 40 mm ID input seals; (2) 7 mm x 40 mm ID double-lipped shaft seals; (1) Pinion gear cap O-ring; (1) 2 mm x 70 mm ID O-ring; (1) 2.5 mm x 75 mm ID O-ring; (2) Housing O-rings; (1) 2 mm x 175 O-ring

Fitment
Make Model / Application Years Part Reference
Polaris Ranger Verify exact application and part number See selected part

Fitment Notes

DIFF-1-001-K

DIFF-1-002-K

DIFF-1-003-K

DIFF-1-004-K

DIFF-1-005-K

DIFF-P-RZRXPTS

DIF-P-RAN1K-001-K

DIF-P-RZR1K-K

DIF-P-RZR800-001-K

DIF-P-RZR1000-001-K

DIF-P-RZRXPT-001-K

DIF-P-RZRXPT-002-K


FAQ

What is this seal kit used for?

It replaces the front-differential seals listed for the compatible application during leak repair or differential service.

Does the kit fit every differential used in the listed vehicle family?

Not necessarily. Match the differential type, OEM reference, and seal dimensions shown for the selected SKU.

Should I inspect other components while the differential is open?

Yes. Check the sealing surfaces, bearings, hubs, and lubricant for wear or contamination before reassembly.

Are these seals intended to keep contamination out as well as oil in?

Yes. The seal package is used at differential openings where lubricant retention and contamination control are both important.

What should I use for installation specifications?

Use the service procedure for the exact differential being repaired for seal depth, fastener torque, lubricant, and fill level.