





The SuperATV Polaris Ranger 1000 Big Lift Kit Axle - Rhino 2.0 is a complete CV axle for Polaris Ranger 1000 builds using big lift kit suspension. Its heat-treated 4340 chromoly construction and enlarged shaft and CV components provide a stronger foundation for trail use and loaded driveline conditions.
A CV axle carries drive from the differential to the wheel while its joints accommodate suspension movement and steering on front applications. With a lift kit, ride height changes the relationship between the differential and wheel hub. Axle length and articulation must suit that kit throughout suspension travel.
During installation, inspect the boots, clamps, splines, and mating components. After assembly, verify that the axle clears nearby components and moves freely through the suspension range; use the vehicle and axle installation instructions for fasteners and service procedures.
Includes:
- (1) Rhino 2.0 CV axle assembly in the selected configuration
Specifications
| Manufacturer | SuperATV |
|---|---|
| Product Type | CV Axle |
| Axle Series | Rhino 2.0 |
| Material | Heat-treated 4340 chromoly steel |
| Application | Big lift kit-specific |
| Design | Enlarged shaft and CV components |
| Heat Treatment | Manufacturer-specific heat treatment |
| Part Number | See the configuration table below |
| Part Number | Axle Length | Axle Location | Year |
|---|---|---|---|
| AX01-024F-1#HD | 6 inch Lift Kit Axles | Front | 2020 |
| AX-1-79-R-LK6-BT#HD | 6 inch Lift Kit Axles | Rear | 2020 |
| AX-1-98-F-LK6-BT#AN | 6 inch Lift Kit Axles | Front | 2021+ |
| AX-1-98-R-LK6-BT#AN | 6 inch Lift Kit Axles | Rear | 2021+ |
Fitment
| Make | Model | Year Range |
|---|---|---|
| Polaris | Ranger 1000 | 2020+ |
| Polaris | Ranger 1000 Crew | 2020+ |
Application Notes:
- For use with the SuperATV Polaris Ranger 1000 big lift kit. This is a kit-specific axle application.
- Not compatible with Anti-Lock Brake Systems (ABS)
FAQ
1. What does this axle replace?
It replaces one CV axle assembly in the selected position for the listed Polaris Ranger 1000 applications. The part-number table identifies the available configurations; each selection is one axle, not a full vehicle set.
2. Does this axle work with a lift or long travel kit?
This is a big lift application. Use the specific kit, axle length, and position identified in the application notes and options; it is not a general stock-length replacement.
3. Why do the CV boots matter?
The boots retain joint grease and help keep water and grit out. Torn rubber, a loose clamp, or thrown grease warrants inspection before contamination damages the joint.
4. Does a stronger axle solve binding or clicking?
No. Investigate the cause, including damaged joints, insufficient clearance, incorrect axle length, or suspension geometry. Stronger shaft material does not correct a mechanical interference problem.
5. What should I inspect after installation?
Verify proper axle seating, boot and clamp condition, and clearance through the suspension range. Follow the vehicle service manual and axle instructions for fastener tightening and any model-specific installation work.