Skip to product information
1 of 1

King Shocks

King PR 2.0 x 16 in. Coilover Shock Piggyback Reservoir

King PR 2.0 x 16 in. Coilover Shock Piggyback Reservoir

SKU:PR2016-COPB

Regular price $608.95
Regular price Sale price $608.95
Sale Sold out
Shipping calculated at checkout.
Quantity
  • Piggyback Reservoir
  • 16 in nominal shock travel
  • Shock Type: Coilover
  • 2.0 in shock body
View full details

The King PR 2.0 x 16 in. Coilover Shock Piggyback Reservoir puts the spring and damper together for a custom suspension that can be matched to the vehicle. With a 2.0-inch nominal body and 16 inches of nominal travel, this shock gives you the dimensions to start laying out your mounts. Choose it from the space and suspension movement you actually have, then select springs for the weight the corner will carry.

The attached piggyback reservoir keeps the package together, but needs clearance beside the spring and shock body. Coil springs are sold separately, so rates and lengths can be chosen for your build rather than forcing the suspension around a spring that happens to be on hand.

Includes:

  • (1) King PR 2.0 x 16 in. Coilover Shock Piggyback Reservoir
  • Piggyback reservoir

Note: Coil springs are sold separately. Match springs to the shock and spring hardware before ordering.


Specifications
Specification Details
Manufacturer King Shocks
Part Number PR2016-COPB
Series PR
Shock Type Coilover
Nominal Body Size 2.0 in.
Nominal Travel 16 in.
Reservoir Piggyback Reservoir
Coil Springs Sold separately
Shaft Diameter 7/8 in.
King Listed Stroke (in.) 16
King Listed Gas Pressure (PSI) 100
Extended Length (in.) 39.615
Compressed Length (in.) 23.585
Quantity Individual

Fitment
Application Details
Application Universal custom suspension; fabrication required
Vehicle Fit Selected by suspension measurements, not year/make/model
Typical Builds Custom tube chassis, trail rigs, buggies, and fabricated coilover conversions

Fitment Notes:

  • Cycle the suspension from full bump to full droop before finalizing the mounts. Include axle articulation and steering lock where applicable.
  • Match the mounting width, bolt size, and available compressed and extended lengths to the selected shock.
  • Use bump stops and limit straps to keep the shock from becoming the suspension travel stop.
  • Allow clearance for the reservoir beside the shock throughout steering and suspension travel.
  • Choose spring rates and lengths for the supported weight, mounting angle, and motion ratio. Tire size alone does not establish a spring rate.

FAQs

Are coil springs included?

No. This listing is for the shock configuration without coil springs. Choose spring length, inside diameter, and rate for the shock hardware and supported vehicle weight.

How do I choose the right travel?

Cycle the suspension and measure the distance between the proposed shock mounts at full bump and droop. Match those measurements to the published lengths, with room for the bump stops and limit straps to do their jobs.

Can I use spring preload to correct the wrong spring rate?

Preload helps set ride height, but it does not turn an unsuitable spring into the correct rate. Work from the corner weight and suspension leverage, then set preload and crossover position as part of the setup.

What clearance does the piggyback reservoir need?

Check the attached reservoir along with the spring and shock body at full bump, droop, articulation, and steering lock. A shock that clears at ride height may still contact a tire or chassis tube when the suspension moves.

Will one shock tune work on every build?

No. Weight, mounting angle, suspension leverage, and terrain all affect the damping the vehicle needs. Give the suspension tuner those details instead of selecting a tune by tire size alone.