
The Eibach ESS Rear Spring - 5 in OD is an individually sold conventional rear race spring for a spring seat using the listed outside diameter. Its free length and rate provide specific setup values for a compatible rear suspension.
The conventional race spring uses cold-wound chrome-silicon wire and is individually tested. Check the spring pocket, installed length and remaining deflection at full suspension compression; the outside-diameter dimension is not a coilover spring ID.
Includes:
- (1) selected spring
Specifications
| SKU | Free Length (in) | Seating Diameter | Rate (lb/in) | Block Height (in) | Spring Deflection (in) |
|---|---|---|---|---|---|
| 1300.500.0225 | 13.00 | 5.00 O.D. | 225 | 3.70 | 9.30 |
Spring deflection is the manufacturer’s spring compression-travel figure. It is not damper stroke, wheel travel or a vehicle load rating. Account for preload and the installed spring stack.
Fitment
| Fitment | Requirement |
|---|---|
| Vehicle Make | Universal/Custom |
| Vehicle Model | Universal/Custom |
| Application | Match spring seating diameter, free length, installed height, spring rate and compression clearance to the suspension hardware. |
| Diameter convention | Outside diameter; not a coilover spring inside diameter. |
FAQs
Are these springs sold in axle pairs?
No. Each SKU supplies one spring.
Is the diameter an inside or outside measurement?
Use the explicit designation in the specifications. The ESS springs and PR1600.500.0075 use outside diameter, while the 3.5 in Platinum group uses inside diameter.
What determines the correct spring rate?
Select rate around vehicle load, suspension motion ratio, installed spring height and the intended track or terrain setup.
What must be checked before installation?
Match the seating and end configuration, available space and installed height. Confirm enough spring deflection remains at full suspension compression.