{"product_id":"1350-drive-shaft-builder-kit","title":"WOD 1350 Driveshaft DIY Builder Kit","description":"\u003cp\u003eThe \u003cstrong\u003eWOD 1350 Driveshaft DIY Builder Kit\u003c\/strong\u003e gives fabricators the core components needed to build a custom-length driveshaft for Jeeps, trail rigs, rock crawlers, lightweight buggies, and custom off-road vehicles. Built with genuine Dana\/Spicer 1350-series driveline components, this kit allows the finished shaft length to be matched to the vehicle's wheelbase, suspension travel, drivetrain placement, and operating angles.\u003c\/p\u003e\n\u003cp\u003eThe 1350 series remains one of the most popular driveline platforms in off-road motorsports because it offers an excellent balance of strength, articulation, weight, serviceability, and replacement-part availability. For many Jeep builds, trail rigs, and lightweight competition vehicles, it provides dependable driveline strength and operating-angle capability without the additional size and rotating weight of larger-series components.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Genuine Dana\/Spicer Weld Stub\u003c\/li\u003e\n\u003cli\u003e(1) Genuine Dana\/Spicer 1350 Weld Yoke\u003c\/li\u003e\n\u003cli\u003e(1) Genuine Dana\/Spicer 1350 Slip Yoke\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e This is a DIY builder kit and does not come assembled. Final measuring, tube cutting, fitting, welding, balancing, and assembly are required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOptional Components:\u003c\/strong\u003e Driveshaft tubing and 1410 U-joints are available separately. \u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eWide Open Design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eComponent Manufacturer\u003c\/td\u003e\n\u003ctd\u003eDana\/Spicer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eDIY Driveshaft Builder Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eU-Joint Series\u003c\/td\u003e\n\u003ctd\u003e1350\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOptional Tube Size\u003c\/td\u003e\n\u003ctd\u003e2.5\" O.D. x .250\" Wall DOM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eOff-Road, Performance, and Custom Driveline Systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAssembly Required\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWelding Required\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eFabricator Installed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTube Included\u003c\/td\u003e\n\u003ctd\u003eOptional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eU-Joints Included\u003c\/td\u003e\n\u003ctd\u003eOptional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRunout Inspection Required\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinal Balancing Required\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003cp\u003e\u003cstrong\u003eUniversal Fitment for Custom Driveshaft Fabrication\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended Applications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eVehicle Type\u003c\/th\u003e\n\u003cth\u003eCommon Series Recommendation\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eJeep TJ\u003c\/td\u003e\n\u003ctd\u003e1350\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJeep LJ\u003c\/td\u003e\n\u003ctd\u003e1350\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJeep JK\u003c\/td\u003e\n\u003ctd\u003e1350 or 1410\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJeep JL\u003c\/td\u003e\n\u003ctd\u003e1350 or 1410\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTrail Rig\u003c\/td\u003e\n\u003ctd\u003e1350\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecreational Rock Crawler\u003c\/td\u003e\n\u003ctd\u003e1350\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLightweight Buggy\u003c\/td\u003e\n\u003ctd\u003e1350\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverland Vehicle\u003c\/td\u003e\n\u003ctd\u003e1350\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUTV-Based Conversion\u003c\/td\u003e\n\u003ctd\u003e1350\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTrail Buggy\u003c\/td\u003e\n\u003ctd\u003e1350\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUltra4 Sportsman Car\u003c\/td\u003e\n\u003ctd\u003e1350\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eCommon Uses:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFront driveshafts\u003c\/li\u003e\n\u003cli\u003eRear driveshafts\u003c\/li\u003e\n\u003cli\u003eJeep driveline upgrades\u003c\/li\u003e\n\u003cli\u003eCustom-length driveshafts\u003c\/li\u003e\n\u003cli\u003eRock crawlers and trail rigs\u003c\/li\u003e\n\u003cli\u003eOff-road buggies\u003c\/li\u003e\n\u003cli\u003eMulti-piece driveshaft systems\u003c\/li\u003e\n\u003cli\u003eCustom tube chassis vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis is a universal builder kit and is not supplied for a predetermined finished length.\u003c\/li\u003e\n\u003cli\u003eMeasure the vehicle at ride height and through its complete suspension cycle before cutting the driveshaft tube.\u003c\/li\u003e\n\u003cli\u003eVerify compatibility with the transmission or transfer-case output, axle yoke, pinion yoke, carrier bearing, selected U-joints, and retention hardware.\u003c\/li\u003e\n\u003cli\u003eConfirm adequate slip-yoke engagement and travel at full suspension compression, full droop, and maximum axle articulation.\u003c\/li\u003e\n\u003cli\u003eCheck driveshaft clearance around chassis tubing, skid plates, suspension links, exhaust, transmission components, and crossmembers.\u003c\/li\u003e\n\u003cli\u003eVerify operating angles at ride height and throughout the complete suspension cycle.\u003c\/li\u003e\n\u003cli\u003eConsider finished shaft length, operating RPM, tube dimensions, vehicle speed, and critical-speed requirements when selecting tubing.\u003c\/li\u003e\n\u003cli\u003eFinal welding should be completed by an experienced driveline fabricator.\u003c\/li\u003e\n\u003cli\u003eThe completed shaft must be inspected for runout and professionally balanced before operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ch3\u003eWhat U-joints work with this driveshaft kit?\u003c\/h3\u003e\n\u003cp\u003eThis kit is designed around standard 1350-series universal joints. Genuine \u003ca href=\"\/products\/1350-u-joint-u-bolt-kit\"\u003eSpicer 1350 Universal Joint and U-Bolt Kits\u003c\/a\u003e with properly matched retention hardware are recommended for dependable fitment, durability, and serviceability.\u003c\/p\u003e\n\u003ch3\u003eIs this driveshaft assembled and ready to install?\u003c\/h3\u003e\n\u003cp\u003eNo. This is a DIY builder kit intended for experienced fabricators and driveline shops. Measuring, tube cutting, component fitting, welding, alignment, runout inspection, balancing, and final assembly are required before installation.\u003c\/p\u003e\n\u003ch3\u003eWhat driveshaft tube is recommended?\u003c\/h3\u003e\n\u003cp\u003eFor many off-road applications, 2.5\" O.D. x .250\" wall DOM tubing provides excellent resistance to dents, bending, torsional loads, and trail impacts. Final tubing selection should also account for finished driveshaft length, operating speed, vehicle weight, available clearance, and critical-speed requirements.\u003c\/p\u003e\n\u003ch3\u003eIs a 1350 driveshaft strong enough for rock crawling?\u003c\/h3\u003e\n\u003cp\u003eA properly designed and fabricated 1350 driveshaft is commonly used in Jeeps, trail rigs, recreational rock crawlers, Ultra4 Sportsman vehicles, and lightweight buggies. Actual strength requirements depend on vehicle weight, gearing, transfer-case reduction, tire size, traction, horsepower, driveshaft length, operating angles, and driving style.\u003c\/p\u003e\n\u003ch3\u003eWhy is slip-yoke travel important?\u003c\/h3\u003e\n\u003cp\u003eThe distance between the transfer case and axle can change as the suspension cycles. Adequate slip travel prevents the driveshaft from bottoming out and damaging the transfer case, shaft, or pinion while also preventing the splines from pulling apart at full droop.\u003c\/p\u003e\n\u003ch3\u003eHow much slip-yoke engagement should be maintained?\u003c\/h3\u003e\n\u003cp\u003eThe slip assembly must remain safely engaged at full suspension droop while retaining enough compression travel to avoid bottoming out at full compression. The required engagement and travel depend on the vehicle's suspension geometry and axle movement.\u003c\/p\u003e\n\u003ch3\u003eWhy should driveshaft operating angles be checked?\u003c\/h3\u003e\n\u003cp\u003eExcessive or mismatched operating angles can create vibration, heat, accelerated U-joint wear, and reduced driveline life. Check the shaft at ride height and throughout the full suspension cycle to ensure the joints do not bind and the shaft maintains adequate clearance.\u003c\/p\u003e\n\u003ch3\u003eWhy should the finished shaft be balanced?\u003c\/h3\u003e\n\u003cp\u003eWelding and component tolerances can introduce runout or weight imbalance. A professionally balanced shaft reduces vibration and helps protect U-joints, pinion bearings, carrier bearings, transfer-case bearings, seals, and transmission output components.\u003c\/p\u003e\n\u003ch3\u003eWhat other components are commonly paired with this kit?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/1350-carrier-bearing-shaft-builder-kit\"\u003eWOD 1350 Carrier Bearing Shaft Builder Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/wod-single-end-carrier-bearing\"\u003eWOD Single-Ended Carrier Bearing\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/1350-u-joint-u-bolt-kit\"\u003eSpicer 1350 Universal Joint and U-Bolt Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/1350-yoke-1-5-x-10-spline\"\u003eSpicer 1350 1.5\" x 10-Spline Yoke\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/14-bolt-tie-in-with-pinion-guard\"\u003eGM 14-Bolt Pinion Tie-In with Pinion Guard\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eShould I choose a 1350, 1410, or 1480 driveshaft?\u003c\/h3\u003e\n\u003cp\u003eA 1350 driveline is a strong choice for most Jeeps, trail rigs, lightweight buggies, and recreational crawlers. Heavier vehicles, larger tires, higher horsepower, or more severe shock loading may justify moving to a \u003ca href=\"\/products\/wod-1410-driveshaft-builder-kit\"\u003eWOD 1410 Driveshaft Builder Kit\u003c\/a\u003e or \u003ca href=\"\/products\/1480-driveshaft-builder-kit-heavy-duty\"\u003eWOD 1480 Heavy-Duty Driveshaft Builder Kit\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eWhat other driveshaft configurations does Wide Open Design offer?\u003c\/h3\u003e\n\u003cp\u003eWide Open Design offers several builder-kit configurations for different driveline combinations and load requirements:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1350 Weld\/Slip Driveshaft Builder Kit\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/wod-1410-driveshaft-builder-kit\"\u003e1410 Weld\/Slip Driveshaft Builder Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/1480-driveshaft-builder-kit-heavy-duty\"\u003e1480 Weld\/Slip Driveshaft Builder Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/1350-1410-slip-driveshaft-builder-kit\"\u003e1350 Weld\/1410 Slip Hybrid Driveshaft Builder Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/1410-1350-hybrid-slip-driveshaft-kit\"\u003e1410 Weld\/1350 Slip Hybrid Driveshaft Builder Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e","brand":"Wide Open Design","offers":[{"title":"Default Title","offer_id":54642143363347,"sku":"WF03000","price":319.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/WF03000-1350-Drive-Shaft-Builder-Kit-Heavy-Duty-1_7c504fe2-437f-4bcb-a9f5-1ee09702115d.jpg?v=1790091728","url":"https:\/\/kohparts.com\/products\/1350-drive-shaft-builder-kit","provider":"KOHParts.com","version":"1.0","type":"link"}