{"title":"Unit Bearings, Drive Flanges \u0026 Parts","description":"\u003cp\u003eUnit Bearings and Drive Flanges is a collection of unit bearings, drive flanges, and related wheel-end parts for custom axle builders combining compatible bearing and shaft connection components. The knuckle interface, shaft spline, wheel pattern, and brake arrangement all influence the combination you need. A unit bearing and drive flange should be selected around the same axle architecture rather than independently. Compare the individual fitment notes and retaining details before ordering. This collection helps you connect those wheel-end decisions, whether the project is a new steering axle, a component conversion, or a focused replacement within an established off-road drivetrain. Review the unit bearings and drive flanges options against your build plan to identify the configuration that fits the job you have in mind.\u003c\/p\u003e","products":[{"product_id":"crane-axle-rear-unit-bearing-wilwood-lightweight-brake-kit","title":"Crane Axle Rear Unit Bearing Wilwood Lightweight Brake Kit - 4 Piston","description":"\u003cp\u003eThe \u003cstrong\u003eCrane Axle Rear Unit Bearing Wilwood 13.5\" Lightweight Brake Kit\u003c\/strong\u003e is a complete bolt-on braking system designed by \u003cstrong\u003eCrane Axle\u003c\/strong\u003e for use with the \u003ca href=\"\/products\/crane-axle-rear-unit-bearing-adapter-cup-assembly-pair\"\u003eCrane Axle Rear Unit Bearing Adapter Cup Assembly\u003c\/a\u003e (CA01033). The system combines Wilwood four-piston calipers, 13.5-inch vented rotors, machined aluminum rotor hats, and dedicated rear caliper brackets into one matched package.\u003c\/p\u003e\n\u003cp\u003eBuilt for demanding off-road applications, this kit reduces unsprung and rotating weight while providing the braking leverage, heat management, and serviceability needed for race vehicles, rock crawlers, trail rigs, and custom axle builds. Every component is selected to work together with the Crane Axle rear unit bearing adapter system.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eNote: \u003cmeta charset=\"utf-8\"\u003eFor Off-Road Use Only\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003eIncludes:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Wilwood Forged Dynalite 4-Piston Calipers\u003c\/li\u003e\n\u003cli\u003e(1) Set of Wilwood Brake Pads\u003c\/li\u003e\n\u003cli\u003e(2) 13.5\" Wilwood Vented Rotors\u003c\/li\u003e\n\u003cli\u003e(2) Crane Axle Machined Aluminum Brake Hats\u003c\/li\u003e\n\u003cli\u003e(2) Crane Axle Bolt-On Rear Brake Brackets\u003c\/li\u003e\n\u003cli\u003eInstallation Hardware\u003c\/li\u003e\n\u003cli\u003eSafety-Wire Ready Rotor Bolts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eCrane Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eRear Unit Bearing Brake Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCalipers\u003c\/td\u003e\n\u003ctd\u003eWilwood Forged Dynalite 4-Piston\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Piston Area\u003c\/td\u003e\n\u003ctd\u003e4.80 sq. in. Per Caliper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotor Diameter\u003c\/td\u003e\n\u003ctd\u003e13.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotor Type\u003c\/td\u003e\n\u003ctd\u003eVented\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotor Weight\u003c\/td\u003e\n\u003ctd\u003e13.4 lbs Each\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCaliper Weight\u003c\/td\u003e\n\u003ctd\u003e3.4 lbs Each\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotor Hat Material\u003c\/td\u003e\n\u003ctd\u003eMachined 6061 Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCaliper Bracket Material\u003c\/td\u003e\n\u003ctd\u003eLaser-Cut 3\/8\" Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWheel Bolt Patterns\u003c\/td\u003e\n\u003ctd\u003e8 on 6.5\" and 8 on 170mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eBolt-On\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotor Hardware\u003c\/td\u003e\n\u003ctd\u003eSafety-Wire Ready Bolts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eComponent\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRequired Adapter Assembly\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/crane-axle-rear-unit-bearing-adapter-cup-assembly-pair\"\u003eCrane Axle Rear Unit Bearing Adapter Cup Assembly\u003c\/a\u003e (CA01033)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnit Bearing Application\u003c\/td\u003e\n\u003ctd\u003e2005+ Super Duty Unit Bearing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Position\u003c\/td\u003e\n\u003ctd\u003eRear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWheel Bolt Patterns\u003c\/td\u003e\n\u003ctd\u003e8 on 6.5\" and 8 on 170mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWheel Compatibility\u003c\/td\u003e\n\u003ctd\u003eCompatible with Double Beadlock Wheels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdditional Compatibility\u003c\/td\u003e\n\u003ctd\u003eMagnum Knuckle Unit Bearing Adapter Applications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned specifically to bolt to the Crane Axle Rear Unit Bearing Adapter Cup Assembly, part number CA01033.\u003c\/li\u003e\n\u003cli\u003eIntended for rear axle applications using 2005+ Super Duty unit bearings.\u003c\/li\u003e\n\u003cli\u003eSupports 8 on 6.5\" and 8 on 170mm wheel bolt patterns when used with compatible hubs and wheels.\u003c\/li\u003e\n\u003cli\u003eVerify wheel diameter, barrel clearance, backspacing, rotor offset, and brake hose routing before installation.\u003c\/li\u003e\n\u003cli\u003eThe required rear unit bearing adapter cup assembly is not listed as included with this brake kit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ch3\u003e1. What axle assembly is this brake kit designed to fit?\u003c\/h3\u003e\n\u003cp\u003eThis kit is designed specifically for the Crane Axle Rear Unit Bearing Adapter Cup Assembly, part number CA01033, in rear axle applications using 2005-and-newer Super Duty unit bearings.\u003c\/p\u003e\n\u003ch3\u003e2. Why use Wilwood four-piston calipers?\u003c\/h3\u003e\n\u003cp\u003eThe forged four-piston calipers apply clamping force from both sides of the rotor. Their 4.80-square-inch total piston area provides strong, balanced braking with consistent modulation during demanding off-road use.\u003c\/p\u003e\n\u003ch3\u003e3. What advantage do the 13.5-inch vented rotors provide?\u003c\/h3\u003e\n\u003cp\u003eThe larger rotor diameter increases braking leverage at the wheel, while the vented construction helps manage heat during repeated braking. This allows the system to generate greater stopping torque with controlled pedal effort.\u003c\/p\u003e\n\u003ch3\u003e4. How does the lightweight design affect vehicle performance?\u003c\/h3\u003e\n\u003cp\u003eReducing rotor, caliper, and hat weight lowers unsprung and rotating mass. This can help the suspension respond more quickly to terrain changes while reducing the amount of mass that must be accelerated and slowed.\u003c\/p\u003e\n\u003ch3\u003e5. What should be verified before installation?\u003c\/h3\u003e\n\u003cp\u003eConfirm that the axle uses the correct Crane Axle adapter assembly and compatible Super Duty unit bearings. Wheel clearance, bolt pattern, rotor offset, brake hose routing, caliper orientation, and bleeder position should also be checked before final assembly.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e","brand":"Crane Axle","offers":[{"title":"Default Title","offer_id":54639584510227,"sku":"CA01040N","price":1335.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/CA01040N-Crane-Rear-UB-Wilwood-Brake-Kit-1.jpg?v=1788281400"},{"product_id":"crane-axle-front-unit-bearing-wilwood-light-weight-brake-kit-6-piston","title":"Crane Axle Front Unit Bearing Wilwood 6 Piston Lightweight Brake Kit","description":"\u003cp\u003eThe \u003cstrong\u003eCrane Axle Front Unit Bearing Wilwood 6-Piston Lightweight Brake Kit\u003c\/strong\u003e is designed for high-performance off-road and fabricated chassis applications using 2005+ Ford Super Duty unit bearings. Built around Wilwood forged billet 6-piston calipers and large-diameter 13.5\" vented rotors, this system drastically improves stopping power while reducing unsprung weight and rotating mass compared to heavier OEM-style cast brake assemblies.\u003c\/p\u003e\n\u003cp\u003eEngineered specifically for Crane Axle Magnum Knuckle and Super Duty unit bearing adapter systems, this bolt-on package combines lightweight 6061-T6 aluminum rotor hats with precision laser-cut caliper brackets for accurate alignment and improved serviceability. The reduction in rotating mass improves suspension response and steering feel, while the 6-piston clamping force delivers the severe-duty braking torque needed for large tires, high-horsepower drivetrains, and aggressive competition off-road use.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eNote: \u003cmeta charset=\"utf-8\"\u003eFor Off-Road Use Only\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003eIncludes:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Wilwood 6-Piston Forged Billet Calipers with Brake Pads\u003c\/li\u003e\n\u003cli\u003e(2) Wilwood 13.5\" Vented Rotors\u003c\/li\u003e\n\u003cli\u003e(2) Crane Axle Machined 6061-T6 Aluminum Rotor Hats\u003c\/li\u003e\n\u003cli\u003e(2) Crane Axle Bolt-On Front Brake Brackets\u003c\/li\u003e\n\u003cli\u003eSafety Wire Ready Rotor Bolts\u003c\/li\u003e\n\u003cli\u003eAll Required Installation Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e \u003cspan class=\"svg-wrapper icon-plus\"\u003e \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n        \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n      \u003c\/svg\u003e \u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCaliper Type\u003c\/td\u003e\n\u003ctd\u003eWilwood Forged Billet 6-Piston\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCaliper Material\u003c\/td\u003e\n\u003ctd\u003eForged Billet Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotor Diameter \u0026amp; Style\u003c\/td\u003e\n\u003ctd\u003e13.5\" Wilwood Vented Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotor Hat Construction\u003c\/td\u003e\n\u003ctd\u003ePrecision-Machined 6061-T6 Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrake Bracket Material\u003c\/td\u003e\n\u003ctd\u003eLaser-Cut High-Strength Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWheel Bolt Pattern Compatibility\u003c\/td\u003e\n\u003ctd\u003eFits 8 on 6.5\" \u0026amp; 8 on 170mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardware Feature\u003c\/td\u003e\n\u003ctd\u003eSafety-Wire Ready Rotor Bolts Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication Design\u003c\/td\u003e\n\u003ctd\u003eBolt-On for 2005+ Ford Super Duty Unit Bearings \u0026amp; Crane Adapters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eManufactured in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e \u003cspan class=\"svg-wrapper icon-plus\"\u003e \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n        \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n      \u003c\/svg\u003e \u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003cp\u003eDesigned for custom off-road steering front axles utilizing \u003cstrong\u003e2005+ Ford Super Duty unit bearings\u003c\/strong\u003e paired with Crane Axle adapters.\u003c\/p\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003cth\u003eAxle Application\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-250 Super Duty (Unit Bearing Donor)\u003c\/td\u003e\n\u003ctd\u003e2005+\u003c\/td\u003e\n\u003ctd\u003eFront Unit Bearing Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-350 Super Duty (Unit Bearing Donor)\u003c\/td\u003e\n\u003ctd\u003e2005+\u003c\/td\u003e\n\u003ctd\u003eFront Unit Bearing Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCustom Steer Axle\u003c\/td\u003e\n\u003ctd\u003eCrane Magnum Knuckle Applications\u003c\/td\u003e\n\u003ctd\u003eCustom Build\u003c\/td\u003e\n\u003ctd\u003eFront Unit Bearing Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCustom Steer Axle\u003c\/td\u003e\n\u003ctd\u003eTube Chassis \u0026amp; Custom Buggy Builds\u003c\/td\u003e\n\u003ctd\u003eCustom Build\u003c\/td\u003e\n\u003ctd\u003eFront Unit Bearing Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned specifically to bolt onto Crane Axle Magnum Knuckle systems and Crane Axle 2005+ Super Duty unit bearing adapters.\u003c\/li\u003e\n\u003cli\u003eDual-drilled rotor hats are compatible with both standard off-road \u003cstrong\u003e8x6.5\"\u003c\/strong\u003e and modern Super Duty \u003cstrong\u003e8x170mm\u003c\/strong\u003e wheel bolt patterns.\u003c\/li\u003e\n\u003cli\u003eIntended for high-performance off-road, rock racing, and fabricated chassis applications.\u003c\/li\u003e\n\u003cli\u003eAlways verify wheel backspacing, beadlock inner barrel clearance, and caliper profile dimensions prior to final assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e \u003cspan class=\"svg-wrapper icon-plus\"\u003e \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n        \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n      \u003c\/svg\u003e \u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ch3\u003e1. What is the performance advantage of a 6-piston caliper over a 4-piston caliper?\u003c\/h3\u003e\n\u003cp\u003eA 6-piston caliper provides a larger total piston clamping area and distributes brake pressure across a longer, more aggressive brake pad pad track. This results in superior clamping torque, more even pad wear, and exceptional pedal modulation—making it the ideal upgrade for heavier Ultra4 cars, rock bouncers, and trail rigs running 40-inch and larger tires.\u003c\/p\u003e\n\u003ch3\u003e2. Why is reducing unsprung weight so important for off-road suspension performance?\u003c\/h3\u003e\n\u003cp\u003eUnsprung weight refers to any vehicle component not supported by the springs (such as axles, wheels, tires, and brakes). By replacing heavy OEM cast-iron rotors and sliding calipers with lightweight Wilwood billet aluminum calipers and 6061-T6 aluminum rotor hats, you drastically reduce rotating inertia and unsprung mass. This allows your shocks to cycle and control wheel movement much faster over whoops, rocks, and rough terrain.\u003c\/p\u003e\n\u003ch3\u003e3. Will this kit bolt directly onto a stock, unmodified Ford Super Duty truck?\u003c\/h3\u003e\n\u003cp\u003eNo. While this brake kit centers around 2005+ Ford Super Duty unit bearing geometry, it is engineered specifically as a lightweight performance upgrade for custom steering axles equipped with Crane Axle Magnum Knuckles and Crane Axle Unit Bearing Adapters on custom-built off-road chassis.\u003c\/p\u003e\n\u003ch3\u003e4. How do the 13.5\" vented rotors handle high-temperature brake fade?\u003c\/h3\u003e\n\u003cp\u003eThe 13.5-inch diameter increases mechanical braking leverage, requiring less pedal effort to generate stopping power. Combined with directional internal cooling vanes, the rotor dissipates severe heat buildup caused by repeated high-speed braking in desert endurance races or steep rock-crawling descents.\u003c\/p\u003e\n\u003ch3\u003e5. What wheel sizes and bolt patterns work with this 6-piston brake system?\u003c\/h3\u003e\n\u003cp\u003eThe machined aluminum rotor hats are dual-drilled to accommodate both \u003cstrong\u003e8 on 6.5\"\u003c\/strong\u003e and \u003cstrong\u003e8 on 170mm\u003c\/strong\u003e wheel bolt patterns. Due to the larger profile of the 6-piston billet calipers and 13.5\" rotors, we recommend running 17-inch or larger wheels and verifying inner barrel clearance when using double beadlock wheels.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e","brand":"Crane Axle","offers":[{"title":"Default Title","offer_id":54639584608531,"sku":"CA01039N6P","price":1699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/CA01039N6P-Crane-Front-Bearing-Brake-Kit-6-Piston-1_dafb1f42-a300-4d72-8799-8b28704b90e0.jpg?v=1788281391"},{"product_id":"crane-axle-front-unit-bearing-wilwood-lightweight-brake-kit","title":"Crane Axle Front Super Duty Unit Bearing Lightweight Brake Kit – Wilwood 4-Piston","description":"\u003cp\u003eThe \u003cstrong\u003eCrane Axle Front Super Duty Unit Bearing Lightweight Brake Kit\u003c\/strong\u003e is engineered for serious off-road performance, precision stopping power, and reduced unsprung weight. Every component in this system is handpicked to deliver reliable braking torque while minimizing rotating mass on your \u003ca title=\"Magnum Knuckle Unit Bearing Adapter\" href=\"\/products\/crane-axle-magnum-knuckle-aluminum-unit-bearing-adapter-pair\"\u003e\u003cstrong\u003eMagnum Knuckle Unit Bearing\u003c\/strong\u003e\u003c\/a\u003e axle setup.\u003c\/p\u003e\n\u003cp\u003eWith larger 13.5\" Wilwood vented rotors, forged 4-piston calipers, and Crane’s precision-machined 6061 aluminum rotor hats, this kit provides a major increase in braking torque, improved pedal feel, and better shock response—allowing your suspension to work more efficiently and keeping your tires planted where they belong on the trail or race course.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003cmeta charset=\"utf-8\"\u003eFor Off-Road Use Only\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003eIncludes:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Wilwood Forged Dynalite 4-Piston Calipers \u0026amp; Brake Pads\u003c\/li\u003e\n\u003cli\u003e(2) Wilwood 13.5\" Vented Rotors\u003c\/li\u003e\n\u003cli\u003e(2) Crane Axle Machined 6061 Aluminum Brake Hats\u003c\/li\u003e\n\u003cli\u003e(2) Crane Axle Bolt-On Front Brake Brackets\u003c\/li\u003e\n\u003cli\u003eSafety Wire Ready Rotor Bolts\u003c\/li\u003e\n\u003cli\u003eAll Necessary Mounting Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatible Unit Bearing Adapter:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/crane-axle-magnum-knuckle-aluminum-unit-bearing-adapter-pair\"\u003eCrane Axle Magnum Knuckle Aluminum Unit Bearing Adapter Pair\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatible Knuckle Kit:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca title=\"Crane Axle Magnum Knuckle Kit\" href=\"\/products\/crane-axle-magnum-knuckle-kit\"\u003eCrane Axle Magnum Knuckle Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e \u003cspan class=\"svg-wrapper icon-plus\"\u003e \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n        \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n      \u003c\/svg\u003e \u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCaliper Model\u003c\/td\u003e\n\u003ctd\u003eWilwood Forged Dynalite 4-Piston\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Piston Area\u003c\/td\u003e\n\u003ctd\u003e4.80 sq. in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCaliper Weight\u003c\/td\u003e\n\u003ctd\u003e3.4 lbs each\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotor Diameter \u0026amp; Type\u003c\/td\u003e\n\u003ctd\u003e13.5\" Wilwood Vented Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotor Weight\u003c\/td\u003e\n\u003ctd\u003e13.4 lbs each\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrake Hat Construction\u003c\/td\u003e\n\u003ctd\u003ePrecision-Machined 6061 Aluminum (Corrosion-Resistant Coating)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrake Bracket Material\u003c\/td\u003e\n\u003ctd\u003e3\/8\" Laser-Cut Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWheel Bolt Pattern Compatibility\u003c\/td\u003e\n\u003ctd\u003eFits 8 on 6.5\" \u0026amp; 8 on 170mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWheel Clearance\u003c\/td\u003e\n\u003ctd\u003eDesigned to clear most double beadlock wheels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication Design\u003c\/td\u003e\n\u003ctd\u003eBolt-On for Crane Magnum Knuckle Unit Bearing Adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e \u003cspan class=\"svg-wrapper icon-plus\"\u003e \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n        \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n      \u003c\/svg\u003e \u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003cp\u003eDesigned for custom off-road steering front axles utilizing \u003cstrong\u003e2005+ Ford Super Duty unit bearings\u003c\/strong\u003e paired with Crane Axle adapters.\u003c\/p\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003cth\u003eAxle Application\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-250 Super Duty (Unit Bearing Donor)\u003c\/td\u003e\n\u003ctd\u003e2005–Present\u003c\/td\u003e\n\u003ctd\u003eFord Super Duty Unit Bearing Front Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-350 Super Duty (Unit Bearing Donor)\u003c\/td\u003e\n\u003ctd\u003e2005–Present\u003c\/td\u003e\n\u003ctd\u003eFord Super Duty Unit Bearing Front Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-450 \/ F-550 Super Duty (Unit Bearing Donor)\u003c\/td\u003e\n\u003ctd\u003e2005–Present\u003c\/td\u003e\n\u003ctd\u003eFord Super Duty Unit Bearing Front Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCustom Steer Axle\u003c\/td\u003e\n\u003ctd\u003eCrane Magnum Knuckle Applications\u003c\/td\u003e\n\u003ctd\u003eCustom Build\u003c\/td\u003e\n\u003ctd\u003eRequires \u003ca title=\"Crane Axle Magnum Knuckle Unit Bearing Adapter\" href=\"\/products\/crane-axle-magnum-knuckle-aluminum-unit-bearing-adapter-pair\"\u003eCrane Axle Unit Bearing Adapter\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned specifically to bolt onto the \u003ca title=\"Crane Axle Magnum Knuckle Unit Bearing Adapter\" href=\"\/products\/crane-axle-magnum-knuckle-aluminum-unit-bearing-adapter-pair\"\u003eCrane Axle Magnum Knuckle Unit Bearing Adapter\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eCompatible with both standard off-road \u003cstrong\u003e8x6.5\"\u003c\/strong\u003e and modern Super Duty \u003cstrong\u003e8x170mm\u003c\/strong\u003e wheel bolt patterns.\u003c\/li\u003e\n\u003cli\u003eEngineered to clear most 17-inch and larger double beadlock wheel combinations.\u003c\/li\u003e\n\u003cli\u003eAlways verify wheel backspacing, brake caliper profile clearance, and unit bearing pilot dimensions before final assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e \u003cspan class=\"svg-wrapper icon-plus\"\u003e \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n        \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n      \u003c\/svg\u003e \u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ch3\u003e1. Why is reducing unsprung weight important for off-road braking and suspension performance?\u003c\/h3\u003e\n\u003cp\u003eHeavy factory cast-iron brake rotors and sliding calipers add significant unsprung mass to your front axle. By switching to lightweight Wilwood forged aluminum calipers and 6061 aluminum brake hats, you shed rotating mass and unsprung weight. This allows your coilover shocks to control wheel movement much more effectively over rough terrain, improving tire traction, reducing chatter, and keeping the vehicle planted.\u003c\/p\u003e\n\u003ch3\u003e2. How do the 13.5\" Wilwood rotors improve stopping power over stock brakes?\u003c\/h3\u003e\n\u003cp\u003eA larger 13.5-inch rotor diameter increases the effective mechanical leverage (braking torque) of the caliper. More rotor surface area passes through the brake pads at any given wheel speed, generating higher friction with less pedal effort—critical when stopping rigs equipped with 40- to 47-inch tires.\u003c\/p\u003e\n\u003ch3\u003e3. Will this brake kit fit factory, unmodified Ford Super Duty axles?\u003c\/h3\u003e\n\u003cp\u003eThis kit is engineered specifically as a bolt-on performance upgrade for custom steering axles running the \u003ca title=\"Crane Axle Magnum Knuckle Kit\" href=\"\/products\/crane-axle-magnum-knuckle-kit\"\u003eCrane Axle Magnum Knuckle Kit\u003c\/a\u003e and \u003ca title=\"Crane Axle Magnum Knuckle Unit Bearing Adapter\" href=\"\/products\/crane-axle-magnum-knuckle-aluminum-unit-bearing-adapter-pair\"\u003eCrane Axle Unit Bearing Adapters\u003c\/a\u003e. It is designed around 2005+ Super Duty unit bearing geometry on custom fabricated housings.\u003c\/p\u003e\n\u003ch3\u003e4. What wheel sizes and bolt patterns are compatible with this brake package?\u003c\/h3\u003e\n\u003cp\u003eThe aluminum rotor hats are dual-drilled to support both \u003cstrong\u003e8 on 6.5\"\u003c\/strong\u003e and \u003cstrong\u003e8 on 170mm\u003c\/strong\u003e wheel bolt patterns. The compact profile of the Wilwood Forged Dynalite calipers is specifically designed to clear most 17-inch double beadlock off-road wheels without interference.\u003c\/p\u003e\n\u003ch3\u003e5. What is the advantage of a fixed 4-piston caliper over a factory sliding caliper?\u003c\/h3\u003e\n\u003cp\u003eFactory sliding calipers can twist and bind under heavy off-road braking loads, leading to uneven pad wear and a spongy brake pedal. Wilwood's forged 4-piston fixed caliper design applies even, opposing clamping force across both sides of the rotor simultaneously, providing a rock-hard pedal feel, superior heat dissipation, and reliable stopping power.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e","brand":"Crane Axle","offers":[{"title":"Default Title","offer_id":54639584706835,"sku":"CA01039N","price":1335.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/CA01039N-Crane-Front-UB-Wilwood-Brake-Kit-1.jpg?v=1788281333"},{"product_id":"crane-axle-rear-05-super-duty-unit-bearing-wilwood-6-piston-brake-kit","title":"Crane Axle Rear 05+ Super Duty Unit Bearing Wilwood 6 Piston Brake Kit","description":"\u003cp\u003eA Light Weight Rear Brake Kit with every component handpicked for off-road performance, durability, and street reliability. This is an all-inclusive COMPLETE kit, providing everything needed to bolt on brakes to your \u003cstrong\u003e\u003ca href=\"\/products\/crane-axle-rear-unit-bearing-adapter-cup-assembly-pair\" title=\"Crane Axle Unit Bearing Cup\"\u003eCrane Axle Unit Bearing Cups\u003c\/a\u003e\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eEngineered for the harshest racing, rock-bouncing, and street-driven conditions, this brake system delivers unmatched stopping power, exceptional pedal feel, and a dramatic reduction in unsprung weight and rotating mass.\u003c\/p\u003e\n\u003cp\u003eThis kit is also the ONLY true bolt-on brake solution designed specifically for \u003cstrong\u003e\u003ca href=\"\/products\/crane-axle-rear-unit-bearing-adapter-cup-assembly-pair\" title=\"Crane Axle Unit Bearing Cup\"\u003eCrane Axle Unit Bearing Cups\u003c\/a\u003e\u003c\/strong\u003e (sold separately), ensuring perfect fitment, simplified installation, and maximum performance with no custom fabrication required.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eNote: \u003cmeta charset=\"utf-8\"\u003eFor Off-Road Use Only\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Wilwood 6 Piston Calipers \u0026amp; Brake Pads\u003c\/li\u003e\n\u003cli\u003e(2) Wilwood 13.5\" Vented Rotors\u003c\/li\u003e\n\u003cli\u003e(2) Crane Axle Brake Hats\u003c\/li\u003e\n\u003cli\u003e(2) Crane Axle Bolt-On Rear Brake Brackets\u003c\/li\u003e\n\u003cli\u003eAll Necessary Hardware for Installation\u003c\/li\u003e\n\u003cli\u003eRotor Bolts (Safety Wire Ready)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e \u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n          \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n          \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"border: 1px solid #ddd; padding: 8px; background-color: #f2f2f2; text-align: left;\"\u003eComponent\u003c\/th\u003e\n\u003cth style=\"border: 1px solid #ddd; padding: 8px; background-color: #f2f2f2; text-align: left;\"\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eCalipers\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eWilwood Forged Dynalite 6 Piston\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eRotor Diameter\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e13.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eRotor Type\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eVented\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eBrake Hat Material\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eMachined 6061 Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eBracket Material\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eLaser Cut 3\/8” Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eWheel Bolt Patterns\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e8 on 6.5\" \u0026amp; 8 on 170mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003ePiston Area (per caliper)\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e4.80 sq. in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eHardware\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eSafety Wire Ready Rotor Bolts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eFitment Type\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eRear, Unit Bearing Cup Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e \u003cspan class=\"svg-wrapper icon-plus\"\u003e \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n          \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n          \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003c\/svg\u003e \u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for Crane Axle 05+ Super Duty Unit Bearing Adapters\u003c\/li\u003e\n\u003cli\u003eCompatible with both 8 on 6.5” and 8 on 170mm wheel bolt patterns\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eTech Insight \u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" height=\"14\" width=\"14\"\u003e\n          \u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M2.75 7H11.25\" class=\"vertical\"\u003e\u003c\/path\u003e\n          \u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M7 2.75L7 11.25\" class=\"horizontal\"\u003e\u003c\/path\u003e\n        \u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003cp\u003eThe Crane Axle Rear 6 Piston Brake Kit was developed with off-road competition and performance trail rigs in mind.\u003c\/p\u003e\n\u003cp\u003eBy switching to forged 6 piston calipers, you gain higher clamping efficiency, improved pedal feel, and superior heat dissipation — all critical under extreme trail or race braking conditions.\u003c\/p\u003e\n\u003cp\u003eThe 13.5\" vented rotors generate increased braking torque for the same pedal input, translating into shorter stopping distances. Meanwhile, the lightweight 6061 aluminum rotor hats cut unsprung weight, improving suspension response and wheel control — helping your shocks perform at their best and keeping traction consistent over uneven terrain.\u003c\/p\u003e\n\u003cp\u003eThis isn’t just an upgrade — it’s a system built for maximum performance, minimal weight, and total reliability.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e","brand":"Crane Axle","offers":[{"title":"Default Title","offer_id":54639584837907,"sku":"CA01040N6P","price":1699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/CA01040N6P-Crane-Rear-UB-Wilwood-Brake-Kit-1_60982af3-9e33-4538-9b00-803761b72d1d.jpg?v=1788281455"},{"product_id":"crane-axle-ub-40-spline-drive-flange-kit","title":"05+ Ford Super Duty Dana 60 40-Spline Unit Bearing Covers- Crane Axle","description":"\u003cp\u003eThe \u003cstrong\u003eCrane Axle 40-Spline Drive Flange Kit for 2005+ Ford Super Duty Dana 60\u003c\/strong\u003e provides a solid drive connection between a compatible 40-spline outer axle shaft and the Super Duty unit-bearing wheel end. Designed for dedicated off-road axle builds, the alloy steel drive pucks replace the factory-style selectable hub components with a simple, permanently engaged drive flange system built for rock crawlers, rock bouncers, trail buggies, and other high-load applications.\u003c\/p\u003e\n\n\u003cp\u003eThe 40-spline design gives builders a large, strong spline interface at the outer wheel end while eliminating the internal engagement mechanism found in a locking hub. Each kit is machined and assembled in the USA and finished with black-anodized 6061-T6 aluminum caps to protect the wheel-end assembly and provide a clean finished installation.\u003c\/p\u003e\n\n\u003ch4\u003eIncludes:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Crane Axle 40-Spline Alloy Steel Drive Pucks\u003c\/li\u003e\n\u003cli\u003e(2) 6061-T6 Aluminum Drive Flange Caps\u003c\/li\u003e\n\u003cli\u003eO-Rings\u003c\/li\u003e\n\u003cli\u003eInstallation Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eCrane Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eDrive Flange Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Platform\u003c\/td\u003e\n\u003ctd\u003e2005+ Ford Super Duty Dana 60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Position\u003c\/td\u003e\n\u003ctd\u003eFront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Axle Spline Count\u003c\/td\u003e\n\u003ctd\u003e40-Spline\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWheel End Type\u003c\/td\u003e\n\u003ctd\u003eSuper Duty Unit Bearing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrive Puck Material\u003c\/td\u003e\n\u003ctd\u003eHigh-Strength Alloy Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCap Material\u003c\/td\u003e\n\u003ctd\u003e6061-T6 Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCap Finish\u003c\/td\u003e\n\u003ctd\u003eBlack Anodized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEngagement Type\u003c\/td\u003e\n\u003ctd\u003ePermanent \/ Non-Selectable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturing\u003c\/td\u003e\n\u003ctd\u003eMachined \u0026amp; Assembled in the USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003eComplete Kit for Both Wheel Ends\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\n\u003cdiv class=\"details-content rte\"\u003e\n\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eAxle Application\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2005+\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-250 Super Duty\u003c\/td\u003e\n\u003ctd\u003eDana 60 Front Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2005+\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-350 Super Duty\u003c\/td\u003e\n\u003ctd\u003eDana 60 Front Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for 2005+ Ford Super Duty Dana 60 front axle wheel ends.\u003c\/li\u003e\n\u003cli\u003eRequires compatible 40-spline outer axle shafts.\u003c\/li\u003e\n\u003cli\u003eDesigned around the Super Duty unit-bearing wheel-end configuration.\u003c\/li\u003e\n\u003cli\u003eReplaces the selectable hub engagement system with a permanently engaged drive flange.\u003c\/li\u003e\n\u003cli\u003eNot a conversion for a stock 35-spline outer axle shaft.\u003c\/li\u003e\n\u003cli\u003eVerify outer axle spline count, unit bearing, axle shaft, and wheel-end configuration before ordering.\u003c\/li\u003e\n\u003cli\u003eCommonly used with upgraded aftermarket axle shafts in custom Dana 60 builds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\n\u003cdiv class=\"details-content rte\"\u003e\n\n\u003ch3\u003eWhat does a drive flange do on a Dana 60?\u003c\/h3\u003e\n\u003cp\u003eA drive flange creates a solid connection between the outer axle shaft and wheel hub. Unlike a selectable locking hub, there is no lock or unlock position—the axle shaft remains mechanically connected to the wheel end.\u003c\/p\u003e\n\n\u003ch3\u003eWhy use drive flanges instead of locking hubs?\u003c\/h3\u003e\n\u003cp\u003eDrive flanges eliminate the internal locking mechanism found in selectable hubs. For dedicated off-road vehicles that do not need to disconnect the front axle at the wheel, the simpler design removes unnecessary engagement components from the wheel end.\u003c\/p\u003e\n\n\u003ch3\u003eDoes this kit work with stock Super Duty axle shafts?\u003c\/h3\u003e\n\u003cp\u003eThis kit requires compatible 40-spline outer axle shafts. It is not designed to convert a stock outer axle shaft to 40-spline by itself.\u003c\/p\u003e\n\n\u003ch3\u003eWhy upgrade to a 40-spline outer axle shaft?\u003c\/h3\u003e\n\u003cp\u003eA 40-spline outer provides a larger spline interface at the wheel end for axle systems built around upgraded 40-spline shafts. This is particularly useful in high-load off-road applications running large tires, lockers, low gearing, and high-horsepower drivetrains.\u003c\/p\u003e\n\n\u003ch3\u003eAre these drive flanges always engaged?\u003c\/h3\u003e\n\u003cp\u003eYes. Drive flanges provide a permanent mechanical connection between the outer axle shaft and wheel end. They do not have a selectable free or locked position like manual locking hubs.\u003c\/p\u003e\n\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e","brand":"Crane Axle","offers":[{"title":"Default Title","offer_id":54640060793107,"sku":"CA01053","price":379.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/CA01053-Crane-Axle-05-Super-Duty-40-Spline-Drive-Flange-Kit-1_899d90c2-1842-4d0b-a1b3-f0d4e34eb5d6.jpg?v=1788281898"},{"product_id":"crane-axle-superduty-unit-bearing-covers-set-of-2","title":"Crane Axle 2005+ Ford Super Duty Unit Bearing Covers – Pair","description":"\u003cp\u003e\u003cstrong\u003eCrane Axle Super Duty Unit Bearing Covers\u003c\/strong\u003e are engineered to shield 2005 and newer Ford Super Duty unit bearings from mud, standing water, sand, and trail debris. Built specifically for custom off-road axles running 32-spline stub shafts—such as RCV Big Bell CV assemblies—these heavy-duty covers act as a positive barrier that locks lubrication inside the hub assembly while preventing abrasive contaminants from destroying your wheel bearings.\u003c\/p\u003e\n\n\u003cp\u003ePrecision-machined in the USA from solid 6061 aluminum and finished with a durable black anodized coating, these covers deliver superior corrosion resistance and long-term trail survivability. The integrated O-ring sealing system eliminates grease weepage during high-RPM trail running and deep water crossings. Engineered for direct bolt-on fitment, each pair installs quickly using the included stainless steel hardware.\u003c\/p\u003e\n\n\u003ch4\u003eIncludes:\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e(2) 6061 Aluminum Caps, Anodized Black\u003c\/li\u003e\n  \u003cli\u003e(2) O-Rings\u003c\/li\u003e\n  \u003cli\u003e(12) Stainless Steel Mounting Bolts\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n  \u003csummary\u003e\n    \u003cstrong\u003eSpecifications\u003c\/strong\u003e\n    \u003cspan class=\"svg-wrapper icon-plus\"\u003e\n      \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n        \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n      \u003c\/svg\u003e\n    \u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv class=\"details-content rte\"\u003e\n    \u003ctable class=\"custom-specs-table\"\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003cth\u003eSpecification\u003c\/th\u003e\n          \u003cth\u003eDetails\u003c\/th\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eManufacturer\u003c\/td\u003e\n          \u003ctd\u003eCrane Axle\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eProduct Type\u003c\/td\u003e\n          \u003ctd\u003eUnit Bearing Dust \u0026amp; Grease Cover\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMaterial\u003c\/td\u003e\n          \u003ctd\u003ePrecision-Machined 6061 Aluminum\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eFinish\u003c\/td\u003e\n          \u003ctd\u003eBlack Anodized Coating\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eSealing Mechanism\u003c\/td\u003e\n          \u003ctd\u003eIntegrated O-Ring Seal\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eStub Shaft Compatibility\u003c\/td\u003e\n          \u003ctd\u003e32-Spline Stub Axles \u0026amp; RCV Big Bell CVs\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eHardware Included\u003c\/td\u003e\n          \u003ctd\u003e(12) Stainless Steel Mounting Bolts\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eCountry of Origin\u003c\/td\u003e\n          \u003ctd\u003eMade in USA\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n  \u003csummary\u003e\n    \u003cstrong\u003eFitment\u003c\/strong\u003e\n    \u003cspan class=\"svg-wrapper icon-plus\"\u003e\n      \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n        \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n      \u003c\/svg\u003e\n    \u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv class=\"details-content rte\"\u003e\n    \u003cp\u003eDesigned for custom off-road front axles and factory applications utilizing \u003cstrong\u003e2005+ Ford Super Duty unit bearings\u003c\/strong\u003e.\u003c\/p\u003e\n    \u003ctable class=\"custom-specs-table\"\u003e\n      \u003cthead\u003e\n        \u003ctr\u003e\n          \u003cth\u003eMake\u003c\/th\u003e\n          \u003cth\u003eModel\u003c\/th\u003e\n          \u003cth\u003eYear Range\u003c\/th\u003e\n          \u003cth\u003eAxle Application\u003c\/th\u003e\n        \u003c\/tr\u003e\n      \u003c\/thead\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eFord\u003c\/td\u003e\n          \u003ctd\u003eF-250 \/ F-350 \/ F-450 Super Duty\u003c\/td\u003e\n          \u003ctd\u003e2005–Present\u003c\/td\u003e\n          \u003ctd\u003eFront Unit Bearing Axle\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eCustom Steer Axle\u003c\/td\u003e\n          \u003ctd\u003eCrane Magnum Knuckle \u0026amp; Super Duty Conversions\u003c\/td\u003e\n          \u003ctd\u003eCustom Build\u003c\/td\u003e\n          \u003ctd\u003e2005+ Style Unit Bearing Hubs\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n    \u003ch3\u003eFitment Notes\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eDesigned specifically for direct bolt-on fitment to 2005+ Ford Super Duty unit bearing assemblies.\u003c\/li\u003e\n      \u003cli\u003eCompatible with standard 32-spline outer stub shafts and RCV Big Bell CV axle assemblies.\u003c\/li\u003e\n      \u003cli\u003eIntended for heavy-duty off-road, rock crawling, rock bouncing, and Ultra4 racing applications.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n  \u003csummary\u003e\n    \u003cstrong\u003eFAQ\u003c\/strong\u003e\n    \u003cspan class=\"svg-wrapper icon-plus\"\u003e\n      \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n        \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n      \u003c\/svg\u003e\n    \u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv class=\"details-content rte\"\u003e\n    \u003ch3\u003e1. Why do I need aftermarket unit bearing covers for my 2005+ Super Duty hubs?\u003c\/h3\u003e\n    \u003cp\u003eIn severe off-road environments, factory dust shields can dislodge or fail to seal against deep mud, sand, and water crossings. Once abrasive debris enters the unit bearing assembly, it accelerates internal bearing wear and leads to premature failure. These billet aluminum O-ring sealed covers provide a positive, crush-proof barrier that keeps grease inside the hub and abrasive contaminants out.\u003c\/p\u003e\n\n    \u003ch3\u003e2. Will these covers clear RCV Big Bell CV axle shafts?\u003c\/h3\u003e\n    \u003cp\u003eYes. These covers are specifically engineered with internal clearance for 32-spline outer stub shafts, including large-body RCV Big Bell CV axle assemblies commonly used in extreme rock crawling and Ultra4 competition builds.\u003c\/p\u003e\n\n    \u003ch3\u003e3. How does the O-ring seal improve bearing longevity?\u003c\/h3\u003e\n    \u003cp\u003eUnlike standard stamped-steel caps that rely on a simple friction fit or RTV silicone, the integrated O-ring creates a consistent, positive seal around the hub face. This prevents grease weepage when the hubs get hot and stops water ingress during submerged trail crossings.\u003c\/p\u003e\n\n    \u003ch3\u003e4. Are these covers compatible with older pre-2005 Ford or GM unit bearings?\u003c\/h3\u003e\n    \u003cp\u003eNo. These covers are precision-machined specifically for the bolt circle and hub face geometry of \u003cstrong\u003e2005 and newer Ford Super Duty unit bearings\u003c\/strong\u003e (and aftermarket hubs built around the 2005+ Timken Super Duty specification).\u003c\/p\u003e\n\n    \u003ch3\u003e5. What hardware is included for installation?\u003c\/h3\u003e\n    \u003cp\u003eEach kit includes two machined 6061 aluminum caps, two sealing O-rings, and twelve corrosion-resistant stainless steel mounting bolts for a complete, direct bolt-on installation.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e","brand":"Crane Axle","offers":[{"title":"Default Title","offer_id":54640061219091,"sku":"CA01047","price":99.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/CA01047-Crane-Axle-Superduty-Unit-Bearing-Covers-1_e0e0570b-d7b6-4bdb-b238-f894b30962e1.jpg?v=1788281899"},{"product_id":"crane-ub-35-spline-drive-flange-kit","title":"Crane Axle 35-Spline Drive Flange Kit for '05+ Ford Super Duty Dana 60","description":"\u003cp\u003eThe \u003cstrong\u003eCrane Axle 35-Spline Drive Flange Kit\u003c\/strong\u003e replaces the factory locking hub interface on 2005 and newer Ford Super Duty Dana 60 front axles with a permanent mechanical connection between the unit bearing hub and axle shaft. Keeping the front axle fully engaged removes the moving parts found in locking hubs, making this kit a strong, reliable option for rock bouncers, trail rigs, competition vehicles, and custom axle builds exposed to high torque and repeated shock loads.\u003c\/p\u003e\n\u003cp\u003eEach kit uses heat-treated alloy steel 35-spline drive pucks paired with machined 6061 aluminum caps that are black anodized and engraved with the Crane Axle logo. Spacers, O-rings, and installation hardware are included for a complete bolt-on conversion designed specifically around 2005+ Ford Super Duty unit bearing hubs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(2) 35-Spline Alloy Steel Drive Pucks\u003c\/li\u003e\n\u003cli\u003e(2) Machined 6061 Aluminum Caps\u003c\/li\u003e\n\u003cli\u003e(2) Spacers\u003c\/li\u003e\n\u003cli\u003e(1) Installation Hardware Pack\u003c\/li\u003e\n\u003cli\u003eComplete Set of O-Rings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eSpecifications \u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eCrane Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eFront Axle Drive Flange Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Application\u003c\/td\u003e\n\u003ctd\u003e2005+ Ford Super Duty Dana 60 Front Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHub Style\u003c\/td\u003e\n\u003ctd\u003eUnit Bearing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpline Count\u003c\/td\u003e\n\u003ctd\u003e35-Spline\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrive Puck Material\u003c\/td\u003e\n\u003ctd\u003eHeat-Treated Alloy Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCap Material\u003c\/td\u003e\n\u003ctd\u003e6061 Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCap Finish\u003c\/td\u003e\n\u003ctd\u003eBlack Anodized with Engraved Crane Axle Logo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation Type\u003c\/td\u003e\n\u003ctd\u003eBolt-On\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eO-Rings Included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardware Included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eMade in the USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFitment \u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003cth\u003eAxle Application\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-250 Super Duty\u003c\/td\u003e\n\u003ctd\u003e2005–Present\u003c\/td\u003e\n\u003ctd\u003eDana 60 Front Axle with Unit Bearing Hubs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-350 Super Duty\u003c\/td\u003e\n\u003ctd\u003e2005–Present\u003c\/td\u003e\n\u003ctd\u003eDana 60 Front Axle with Unit Bearing Hubs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-450 Super Duty\u003c\/td\u003e\n\u003ctd\u003e2005–Present\u003c\/td\u003e\n\u003ctd\u003eDana 60 Front Axle with Unit Bearing Hubs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-550 Super Duty\u003c\/td\u003e\n\u003ctd\u003e2005–Present\u003c\/td\u003e\n\u003ctd\u003eDana 60 Front Axle with Unit Bearing Hubs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for 2005 and newer Ford Super Duty Dana 60 front axles using unit bearing hub assemblies.\u003c\/li\u003e\n\u003cli\u003eRequires compatible 35-spline outer axle shafts.\u003c\/li\u003e\n\u003cli\u003eNot compatible with factory 30-spline outer shafts.\u003c\/li\u003e\n\u003cli\u003eNot compatible with older kingpin Dana 60 axles or serviceable spindle-style hub assemblies.\u003c\/li\u003e\n\u003cli\u003eThe drive flanges keep the front axle shafts permanently engaged and do not provide hub disconnect capability.\u003c\/li\u003e\n\u003cli\u003eVerify axle spline count, unit bearing style, brake package, wheel clearance, and outer shaft compatibility before ordering.\u003c\/li\u003e\n\u003cli\u003eCommonly used in rock bouncers, rock crawlers, competition vehicles, fabricated front axles, and heavy-duty custom builds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cb\u003e\u003cspan\u003eFAQ\u003c\/span\u003e\u003c\/b\u003e \u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ch3\u003eWhat does a drive flange kit do on a Ford Super Duty Dana 60?\u003c\/h3\u003e\n\u003cp\u003eA drive flange creates a solid mechanical connection between the axle shaft and unit bearing hub. This keeps the front axle shaft engaged at all times and removes the internal locking mechanism used by factory-style hubs.\u003c\/p\u003e\n\u003ch3\u003eAre drive flanges stronger than locking hubs?\u003c\/h3\u003e\n\u003cp\u003eDrive flanges generally provide a stronger and simpler connection because they eliminate the small moving components and engagement mechanisms found inside locking hubs. This makes them well suited for high-torque and high-impact off-road applications.\u003c\/p\u003e\n\u003ch3\u003eWill this kit work with factory Ford Super Duty axle shafts?\u003c\/h3\u003e\n\u003cp\u003eOnly if the outer axle shafts use the required 35-spline configuration. Verify the actual outer shaft spline count before ordering, especially on stock, modified, or axle-swapped assemblies.\u003c\/p\u003e\n\u003ch3\u003eCan the front axle be disconnected after installing these drive flanges?\u003c\/h3\u003e\n\u003cp\u003eNo. The axle shafts remain mechanically connected to the hubs whenever the vehicle is moving. The transfer case still controls whether engine torque is sent to the front axle, but the shafts, differential, and front driveline components continue to rotate.\u003c\/p\u003e\n\u003ch3\u003eDoes this kit fit older kingpin Dana 60 axles?\u003c\/h3\u003e\n\u003cp\u003eNo. This kit is designed for 2005+ Ford Super Duty Dana 60 unit bearing hubs. Older kingpin and serviceable spindle-style Dana 60 hub assemblies use a different design and require different drive flange components.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e","brand":"Crane Axle","offers":[{"title":"Default Title","offer_id":54640061284627,"sku":"CA01053-35","price":379.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/CA1053-35-Crane-Unit-Bearing-35-Spline-Drive-Flange-1_624f8557-42b4-4cc4-af02-c74993001b98.jpg?v=1788890894"},{"product_id":"crane-axle-unit-bearing-abs-plug-single","title":"Crane Axle ABS Block-Off Fitting for '05+ Unit Bearing (Single)","description":"\u003cp\u003eThe \u003cstrong\u003eCrane Axle ABS Port Block-Off Fitting\u003c\/strong\u003e seals the factory ABS sensor opening in 2005 and newer Ford Super Duty unit bearing hubs when the front ABS system is not being used. It is designed for axle swaps, custom front axles, rock crawlers, trail rigs, and off-road builds that use Super Duty unit bearings without retaining the original wheel-speed sensor.\u003c\/p\u003e\n\u003cp\u003ePrecision machined from 7075 billet aluminum, the fitting installs in place of the factory ABS sensor and uses the original OE retaining bolt. The included O-ring seals the opening against dirt, moisture, and debris, providing a clean and serviceable way to protect the unit bearing assembly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Crane Axle ABS Port Block-Off Fitting\u003c\/li\u003e\n\u003cli\u003e(1) O-Ring Seal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Sold individually. Reuses the original OE ABS sensor mounting bolt.\u003c\/p\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eSpecifications \u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eCrane Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eABS Sensor Port Block-Off Fitting\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003e2005+ Ford Super Duty Unit Bearing Hubs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e7075 Billet Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeal Type\u003c\/td\u003e\n\u003ctd\u003eO-Ring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Hardware\u003c\/td\u003e\n\u003ctd\u003eReuses Original OE Bolt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation Type\u003c\/td\u003e\n\u003ctd\u003eDirect Replacement for Factory ABS Sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003eSold Individually\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eMade in the USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFitment \u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHub Type\u003c\/td\u003e\n\u003ctd\u003e2005+ Ford Super Duty Unit Bearing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eABS Configuration\u003c\/td\u003e\n\u003ctd\u003eBuilds Not Using the Factory Front ABS Sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCommon Use\u003c\/td\u003e\n\u003ctd\u003eAxle Swaps, Custom Dana 60 Builds, Rock Crawlers, and Trail Rigs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for 2005 and newer Ford Super Duty unit bearing hubs with the factory ABS sensor removed.\u003c\/li\u003e\n\u003cli\u003eCompatible with \u003ca href=\"\/products\/modified-timken-2005-super-duty-unit-bearing\"\u003emodified 2005+ Super Duty unit bearings\u003c\/a\u003e using the factory-style ABS sensor port.\u003c\/li\u003e\n\u003cli\u003eIntended only for vehicles and custom axle assemblies that do not require the front ABS sensor.\u003c\/li\u003e\n\u003cli\u003eReuses the original OE ABS sensor retaining bolt.\u003c\/li\u003e\n\u003cli\u003eInspect the O-ring and ABS port for damage or debris before installation.\u003c\/li\u003e\n\u003cli\u003eTorque the reused OE bolt to the applicable factory specification.\u003c\/li\u003e\n\u003cli\u003eOne fitting is required per unit bearing; two are needed to block both front hubs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cb\u003eFAQ\u003c\/b\u003e \u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ch3\u003eWhat does an ABS port block-off fitting do?\u003c\/h3\u003e\n\u003cp\u003eIt seals the opening left behind when the factory ABS wheel-speed sensor is removed from a Super Duty unit bearing. This helps keep dirt, water, and trail debris out of the bearing assembly.\u003c\/p\u003e\n\u003ch3\u003eWill this fitting disable the ABS system?\u003c\/h3\u003e\n\u003cp\u003eThis fitting is intended for builds where the front ABS sensor is already not being used. Removing or bypassing an active factory ABS sensor may affect ABS operation and warning lights.\u003c\/p\u003e\n\u003ch3\u003eDoes this fit all Ford Super Duty wheel hubs?\u003c\/h3\u003e\n\u003cp\u003eIt is designed for 2005 and newer Ford Super Duty unit bearing hubs with the factory-style ABS sensor port. Verify the hub design before ordering, especially on modified or aftermarket assemblies.\u003c\/p\u003e\n\u003ch3\u003eIs the mounting bolt included?\u003c\/h3\u003e\n\u003cp\u003eNo. The block-off fitting reuses the original OE bolt that retained the factory ABS sensor.\u003c\/p\u003e\n\u003ch3\u003eHow many fittings do I need for one front axle?\u003c\/h3\u003e\n\u003cp\u003eThe fitting is sold individually. Order two if both left and right unit bearing ABS ports need to be sealed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e","brand":"Crane Axle","offers":[{"title":"Default Title","offer_id":54640091037971,"sku":"CA01036","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/CA01036-Crane-Unit-Bearing-ABS-Plug-1.jpg?v=1788417317"},{"product_id":"crane-axle-magnum-knuckle-aluminum-unit-bearing-adapter-pair","title":"Crane Axle Magnum Knuckle Aluminum Unit Bearing Adapter – 2005+ Super Duty (Pair)","description":"\u003cp\u003eThe \u003cstrong\u003eCrane Axle Magnum Knuckle Aluminum Unit Bearing Adapter\u003c\/strong\u003e is engineered to integrate 2005+ Ford Super Duty unit bearings with the \u003ca href=\"\/products\/crane-axle-magnum-knuckle-kit\"\u003eCrane Axle Magnum Outer Knuckle System\u003c\/a\u003e for high-strength off-road steering axle builds. Designed for rock crawling, Ultra4 racing, and custom fabricated axle applications, this precision-machined adapter combines the compact packaging and low-maintenance serviceability of modern unit bearings with the extreme lateral strength required for large tires, high horsepower, and aggressive steering loads.\u003c\/p\u003e\n\n\u003cp\u003eMachined from lightweight aluminum to reduce unsprung weight, this adapter simplifies wheel-end maintenance compared to traditional spindle and wheel-bearing setups. Its enlarged internal profile allows complete RCV Big Bell CV axle shaft assemblies to pass through and install \u003cstrong\u003ewithout disassembling the CV boot\u003c\/strong\u003e, drastically saving time during initial shop assembly and trailside repairs. Built for versatility, these adapters also support modified 2.5-ton Rockwell steering knuckle conversions.\u003c\/p\u003e\n\n\u003ch4\u003eIncludes:\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e(2) 2005+ Super Duty Unit Bearing Adapters\u003c\/li\u003e\n  \u003cli\u003eAll Required Mounting Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n  \u003csummary\u003e\n    \u003cstrong\u003eSpecifications\u003c\/strong\u003e\n    \u003cspan class=\"svg-wrapper icon-plus\"\u003e\n      \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n        \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n      \u003c\/svg\u003e\n    \u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv class=\"details-content rte\"\u003e\n    \u003ctable class=\"custom-specs-table\"\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003cth\u003eSpecification\u003c\/th\u003e\n          \u003cth\u003eDetails\u003c\/th\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eManufacturer\u003c\/td\u003e\n          \u003ctd\u003eCrane Axle\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMaterial\u003c\/td\u003e\n          \u003ctd\u003ePrecision-Machined Lightweight Aluminum\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eKnuckle Compatibility\u003c\/td\u003e\n          \u003ctd\u003e\n\u003ca href=\"\/products\/crane-axle-magnum-knuckle-kit\"\u003eCrane Axle Magnum Outer Knuckles\u003c\/a\u003e \u0026amp; Modified 2.5-Ton Rockwell Knuckles\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eHub \/ Bearing Compatibility\u003c\/td\u003e\n          \u003ctd\u003e\u003ca href=\"\/products\/modified-timken-2005-super-duty-unit-bearing\"\u003eModified Timken 2005+ Super Duty Unit Bearing\u003c\/a\u003e\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eWheel Bolt Pattern Support\u003c\/td\u003e\n          \u003ctd\u003eStandard 8x6.5\"\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eAxle Shaft Compatibility\u003c\/td\u003e\n          \u003ctd\u003eRCV Big Bell CVs (No boot removal required), 40-Spline Inners, Forged 1550 Shafts\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eApplication Grade\u003c\/td\u003e\n          \u003ctd\u003eExtreme Off-Road Steering Applications\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eCountry of Origin\u003c\/td\u003e\n          \u003ctd\u003eMade in USA\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n    \u003ch3\u003eCompatible Bolt-On Brake Kits\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eCrane Axle \u003ca href=\"\/products\/crane-axle-front-unit-bearing-wilwood-lightweight-brake-kit\"\u003eFront UB Wilwood Brake Kit (Part # CA01039N)\u003c\/a\u003e\n\u003c\/li\u003e\n      \u003cli\u003eCrane Axle \u003ca href=\"\/products\/crane-axle-front-unit-bearing-wilwood-light-weight-brake-kit-6-piston\"\u003eFront Unit Bearing Wilwood Lightweight Brake Kit - 6 Piston (Part # CA01039N6P)\u003c\/a\u003e\n\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n  \u003csummary\u003e\n    \u003cstrong\u003eFitment\u003c\/strong\u003e\n    \u003cspan class=\"svg-wrapper icon-plus\"\u003e\n      \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n        \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n      \u003c\/svg\u003e\n    \u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv class=\"details-content rte\"\u003e\n    \u003cp\u003eDesigned for custom-built steering front axles in \u003cstrong\u003eRock Crawlers, Rock Bouncers, Ultra4 Race Cars, and Hardcore Trail Rigs\u003c\/strong\u003e.\u003c\/p\u003e\n    \u003ctable class=\"custom-specs-table\"\u003e\n      \u003cthead\u003e\n        \u003ctr\u003e\n          \u003cth\u003eMake \/ Application\u003c\/th\u003e\n          \u003cth\u003eModel \/ Setup\u003c\/th\u003e\n          \u003cth\u003eYear Range\u003c\/th\u003e\n          \u003cth\u003eAxle Application\u003c\/th\u003e\n        \u003c\/tr\u003e\n      \u003c\/thead\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eFord\u003c\/td\u003e\n          \u003ctd\u003eF-250 \/ F-350 Super Duty (Unit Bearing Donor)\u003c\/td\u003e\n          \u003ctd\u003e2005+\u003c\/td\u003e\n          \u003ctd\u003eFront Unit Bearing Axle\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eCustom Steer Axle\u003c\/td\u003e\n          \u003ctd\u003eCrane Magnum Knuckle Applications\u003c\/td\u003e\n          \u003ctd\u003eCustom Build\u003c\/td\u003e\n          \u003ctd\u003eFront Steering Axle\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eCustom Steer Axle\u003c\/td\u003e\n          \u003ctd\u003eModified Rockwell Knuckle Conversions\u003c\/td\u003e\n          \u003ctd\u003eCustom Build\u003c\/td\u003e\n          \u003ctd\u003eFront Steering Axle\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n    \u003ch3\u003eFitment Notes\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eDesigned specifically to adapt 2005+ Ford Super Duty unit bearings onto \u003ca href=\"\/products\/crane-axle-magnum-knuckle-kit\"\u003eCrane Axle Magnum Outer Knuckles\u003c\/a\u003e.\u003c\/li\u003e\n      \u003cli\u003eCompatible with \u003ca href=\"\/products\/modified-timken-2005-super-duty-unit-bearing\"\u003eModified Timken 2005+ Super Duty Unit Bearings\u003c\/a\u003e supporting a standard 8x6.5\" wheel bolt pattern.\u003c\/li\u003e\n      \u003cli\u003eAllows RCV Big Bell CV axle shafts to pass through without removing or stretching the CV boot.\u003c\/li\u003e\n      \u003cli\u003eCan also be adapted to custom or modified 2.5-ton Rockwell steering knuckle assemblies.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n  \u003csummary\u003e\n    \u003cstrong\u003eFAQ\u003c\/strong\u003e\n    \u003cspan class=\"svg-wrapper icon-plus\"\u003e\n      \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n        \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n      \u003c\/svg\u003e\n    \u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv class=\"details-content rte\"\u003e\n    \u003ch3\u003e1. Why convert to a 2005+ Ford Super Duty unit bearing instead of a traditional spindle setup?\u003c\/h3\u003e\n    \u003cp\u003eModern 2005+ Ford Super Duty unit bearings offer superior wheel-end rigidity, more compact packaging, and eliminate the routine maintenance of repacking and setting bearing preload on traditional spindle setups. When paired with this adapter, you get a sealed, ultra-strong wheel bearing assembly that can be replaced quickly on the trail or in the pits.\u003c\/p\u003e\n\n    \u003ch3\u003e2. How does this adapter allow me to install RCV Big Bell shafts without removing the CV boot?\u003c\/h3\u003e\n    \u003cp\u003eMany aftermarket steering adapters have a tight internal bore that requires builders to remove or stretch the neoprene CV boot over the joint during installation—risking tears and joint contamination. Crane engineered the internal profile of this aluminum adapter with maximum clearance so the entire assembled RCV Big Bell CV and boot slide straight through.\u003c\/p\u003e\n\n    \u003ch3\u003e3. Will this adapter work with standard, unmodified Ford Super Duty unit bearings?\u003c\/h3\u003e\n    \u003cp\u003eThis adapter is engineered to work seamlessly with \u003ca href=\"\/products\/modified-timken-2005-super-duty-unit-bearing\"\u003eModified Timken 2005+ Super Duty Unit Bearings\u003c\/a\u003e, which are machined to accept standard off-road 8x6.5\" wheel bolt patterns and upgraded axle splines. Always verify your unit bearing's pilot diameter and bolt pattern before final assembly.\u003c\/p\u003e\n\n    \u003ch3\u003e4. Which brake kits bolt directly to this unit bearing adapter setup?\u003c\/h3\u003e\n    \u003cp\u003eCrane Axle offers dedicated lightweight bolt-on Wilwood brake packages designed specifically for this unit bearing conversion, including the \u003ca href=\"\/products\/crane-axle-front-unit-bearing-wilwood-lightweight-brake-kit\"\u003e4-Piston Front UB Wilwood Brake Kit (CA01039N)\u003c\/a\u003e and the heavy-duty \u003ca href=\"\/products\/crane-axle-front-unit-bearing-wilwood-light-weight-brake-kit-6-piston\"\u003e6-Piston Front UB Wilwood Brake Kit (CA01039N6P)\u003c\/a\u003e.\u003c\/p\u003e\n\n    \u003ch3\u003e5. Is aluminum strong enough for heavy-duty steering axle applications?\u003c\/h3\u003e\n    \u003cp\u003eYes. Machined from high-grade aerospace aluminum, these adapters provide the immense compressive and shear strength required for 40- to 47-inch tires and high-horsepower rock bouncers while significantly shedding unsprung weight from your front axle assembly.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e","brand":"Crane Axle","offers":[{"title":"Default Title","offer_id":54640091300115,"sku":"CA01035A","price":549.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/CA01035A-Crane-Magnum-Knuckle-Bearing-Adaptor-1.jpg?v=1791399149"},{"product_id":"crane-axle-rear-unit-bearing-adapter-cup-assembly-pair","title":"Crane Axle Rear 05+ Super Duty Unit Bearing Cups","description":"\u003cp\u003eThe \u003cstrong\u003eCrane Axle Rear 05+ Super Duty Unit Bearing Cups\u003c\/strong\u003e allow builders to use 2005+ Ford Super Duty unit bearings on custom fabricated rear axle housings. These weld-on cups replace the traditional spindle-style wheel end with a compact unit-bearing configuration and are pre-bored to 3.250\" ID with enough material to machine for axle housing tubes up to 4.00\" OD.\u003c\/p\u003e\n\n\u003cp\u003eUsing a sealed Super Duty unit bearing simplifies the rear wheel end by eliminating traditional spindles, spindle nuts, bearing preload adjustment, and oil-lubricated wheel bearings. For custom off-road axles, that creates a strong, serviceable package with room for large-spline axle shafts while making wheel-end assembly and maintenance easier.\u003c\/p\u003e\n\n\u003ch4\u003eIncludes:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Crane Axle Rear Unit Bearing Cups\u003c\/li\u003e\n\u003cli\u003eMounting Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eCrane Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eRear Unit Bearing Cups\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Position\u003c\/td\u003e\n\u003ctd\u003eRear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWheel End Type\u003c\/td\u003e\n\u003ctd\u003e2005+ Ford Super Duty Unit Bearing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eWeld-On\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePre-Bored Inside Diameter\u003c\/td\u003e\n\u003ctd\u003e3.250\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Housing Tube Diameter\u003c\/td\u003e\n\u003ctd\u003eUp to 4.00\" OD After Machining\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Housing Type\u003c\/td\u003e\n\u003ctd\u003eCustom \/ Fabricated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle Required\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnit Bearings\u003c\/td\u003e\n\u003ctd\u003eNot Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturing\u003c\/td\u003e\n\u003ctd\u003eMade in the USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003ePair\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\n\u003cdiv class=\"details-content rte\"\u003e\n\n\u003cp\u003e\u003cstrong\u003eDesigned For:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCustom fabricated rear axle housings\u003c\/li\u003e\n\u003cli\u003e2005+ Ford Super Duty unit-bearing wheel ends\u003c\/li\u003e\n\u003cli\u003eLarge-spline custom axle shaft applications\u003c\/li\u003e\n\u003cli\u003eRock crawlers and rock bouncers\u003c\/li\u003e\n\u003cli\u003eUltra4 and competition off-road vehicles\u003c\/li\u003e\n\u003cli\u003eCustom tube chassis and trail buggies\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThese cups are designed to adapt 2005+ Ford Super Duty unit bearings to a custom rear axle housing.\u003c\/li\u003e\n\u003cli\u003eThese are not replacement cups for a factory Ford Super Duty rear axle.\u003c\/li\u003e\n\u003cli\u003eCups are supplied with a 3.250\" ID and can be machined for axle housing tubes up to 4.00\" OD.\u003c\/li\u003e\n\u003cli\u003eFinal machining must match the axle housing tube being used.\u003c\/li\u003e\n\u003cli\u003eWelding and axle fabrication are required.\u003c\/li\u003e\n\u003cli\u003eUnit bearings and axle shafts are not included.\u003c\/li\u003e\n\u003cli\u003eAxle shaft length and spline configuration must be matched to the complete axle assembly.\u003c\/li\u003e\n\u003cli\u003eVerify brake, wheel, axle shaft, and unit-bearing compatibility before final assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eOptional Brake Kits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/crane-axle-rear-unit-bearing-wilwood-lightweight-brake-kit\"\u003eCrane Axle Rear Unit Bearing Wilwood Lightweight Brake Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/crane-axle-rear-05-super-duty-unit-bearing-wilwood-6-piston-brake-kit\"\u003eCrane Axle Rear 05+ Super Duty Unit Bearing Wilwood 6-Piston Brake Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\n\u003cdiv class=\"details-content rte\"\u003e\n\n\u003ch3\u003eWhat do these rear unit bearing cups do?\u003c\/h3\u003e\n\u003cp\u003eThese cups provide the interface between a custom rear axle housing and a 2005+ Ford Super Duty unit bearing. They are welded to the axle housing so builders can use a unit-bearing wheel end instead of a traditional spindle and serviceable wheel-bearing assembly.\u003c\/p\u003e\n\n\u003ch3\u003eWhy use a Super Duty unit bearing on a custom rear axle?\u003c\/h3\u003e\n\u003cp\u003eA sealed unit bearing combines the wheel bearings and hub support into a compact assembly. This eliminates traditional spindle nuts, wheel-bearing preload adjustment, bearing packing, and oil-lubricated wheel bearings, simplifying both axle construction and wheel-end service.\u003c\/p\u003e\n\n\u003ch3\u003eDo these cups fit directly onto a 4\" axle tube?\u003c\/h3\u003e\n\u003cp\u003eNo. The cups are supplied with a 3.250\" pre-bored ID and contain enough material to be machined for axle housing tubes up to 4.00\" OD. The cups must be machined to match the specific housing before welding.\u003c\/p\u003e\n\n\u003ch3\u003eAre the Super Duty unit bearings included?\u003c\/h3\u003e\n\u003cp\u003eNo. This product includes the pair of rear unit bearing cups and mounting hardware. The unit bearings, axle shafts, brakes, and other wheel-end components are selected separately for the complete axle build.\u003c\/p\u003e\n\n\u003ch3\u003eCan I use these cups with a large-spline rear axle shaft?\u003c\/h3\u003e\n\u003cp\u003eYes. One of the advantages of this wheel-end configuration is its ability to support custom large-spline axle shaft applications. The axle shaft, unit bearing, drive interface, differential, and other components must all be selected as a compatible system.\u003c\/p\u003e\n\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e","brand":"Crane Axle","offers":[{"title":"Default Title","offer_id":54640091365651,"sku":"CA01033","price":599.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/CA01033-Crane-Rear-Bearing-Adaptor-Cup-1.jpg?v=1788282268"},{"product_id":"modified-timken-2005-super-duty-unit-bearing","title":"Modified Timken 2005+ Ford Super Duty Unit Bearing – 8x6.5\" Bolt Pattern","description":"\u003cp\u003eThe \u003cstrong\u003eModified Timken 2005+ Ford Super Duty Unit Bearing\u003c\/strong\u003e is the gold standard upgrade for builders converting a Dana 60 or building custom steering axles for rock crawlers, rock bouncers, Ultra4 race cars, and hardcore trail rigs. Starting as a genuine Timken hub assembly, each unit is precision-modified in-house to eliminate traditional spindle and wheel-bearing maintenance while delivering massive load capacity and proven competition durability.\u003c\/p\u003e\n\n\u003cp\u003eEach assembly is precision-machined to a standard off-road \u003cstrong\u003e8 on 6.5\" wheel bolt pattern\u003c\/strong\u003e, fitted with heavy-duty 9\/16\" wheel studs for superior clamping force, and pre-installed with an ABS port block-off fitting. Designed to pair seamlessly with custom Dana 60 builds, Reid Racing Super Kingpin knuckles, and Crane Axle steering systems, this sealed hub assembly provides a reliable, bolt-on wheel-end solution that makes trailside servicing fast and effortless.\u003c\/p\u003e\n\n\u003ch4\u003eIncludes:\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e(1) Modified Genuine Timken 2005+ Ford Super Duty Unit Bearing\u003c\/li\u003e\n  \u003cli\u003e(8) 9\/16\" Wheel Studs (Pre-Installed)\u003c\/li\u003e\n  \u003cli\u003e(1) ABS Port Block-Off Fitting (Pre-Installed)\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Sold individually. Verify knuckle, brake, and axle compatibility prior to ordering.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n  \u003csummary\u003e\n    \u003cstrong\u003eSpecifications\u003c\/strong\u003e\n    \u003cspan class=\"svg-wrapper icon-plus\"\u003e\n      \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n        \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n      \u003c\/svg\u003e\n    \u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv class=\"details-content rte\"\u003e\n    \u003ctable class=\"custom-specs-table\"\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003cth\u003eSpecification\u003c\/th\u003e\n          \u003cth\u003eDetails\u003c\/th\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eBase Manufacturer\u003c\/td\u003e\n          \u003ctd\u003eTimken (Genuine OEM Assembly)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eOriginal Donor Application\u003c\/td\u003e\n          \u003ctd\u003e2005+ Ford F-250 \/ F-350 \/ F-450 Super Duty\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eWheel Bolt Pattern\u003c\/td\u003e\n          \u003ctd\u003e8 on 6.5\" (Precision Machined)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eWheel Stud Size\u003c\/td\u003e\n          \u003ctd\u003e9\/16\" Heavy-Duty Studs (Installed)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eABS Sensor Port\u003c\/td\u003e\n          \u003ctd\u003eSealed (Block-Off Fitting Installed)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eBearing Design\u003c\/td\u003e\n          \u003ctd\u003eSealed Unit Bearing Assembly\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eSold As\u003c\/td\u003e\n          \u003ctd\u003eIndividually (1 Hub Assembly)\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n  \u003csummary\u003e\n    \u003cstrong\u003eFitment\u003c\/strong\u003e\n    \u003cspan class=\"svg-wrapper icon-plus\"\u003e\n      \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n        \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n      \u003c\/svg\u003e\n    \u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv class=\"details-content rte\"\u003e\n    \u003cp\u003eDesigned for custom off-road front axle conversions across \u003cstrong\u003eRock Crawlers, Rock Bouncers, Ultra4 Race Cars, and Hardcore Trail Rigs\u003c\/strong\u003e.\u003c\/p\u003e\n    \u003ctable class=\"custom-specs-table\"\u003e\n      \u003cthead\u003e\n        \u003ctr\u003e\n          \u003cth\u003eApplication Type\u003c\/th\u003e\n          \u003cth\u003eCompatible Knuckles \/ Housings\u003c\/th\u003e\n          \u003cth\u003eBase Bearing Donor\u003c\/th\u003e\n        \u003c\/tr\u003e\n      \u003c\/thead\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eDana 60 Conversion\u003c\/td\u003e\n          \u003ctd\u003eReid Racing Super Kingpin Knuckles\u003c\/td\u003e\n          \u003ctd\u003e2005+ Ford Super Duty\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eCustom Steering Axle\u003c\/td\u003e\n          \u003ctd\u003eCrane Axle Outer Knuckle Systems\u003c\/td\u003e\n          \u003ctd\u003e2005+ Ford Super Duty\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eFabricated Solid Axle\u003c\/td\u003e\n          \u003ctd\u003eCustom Front Axle Assemblies\u003c\/td\u003e\n          \u003ctd\u003e2005+ Ford Super Duty\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n    \u003ch3\u003eUnit Bearings vs. Traditional Dana 60 Hubs\u003c\/h3\u003e\n    \u003ctable class=\"custom-specs-table\"\u003e\n      \u003cthead\u003e\n        \u003ctr\u003e\n          \u003cth\u003eFeature\u003c\/th\u003e\n          \u003cth\u003eTraditional Dana 60 Hub\u003c\/th\u003e\n          \u003cth\u003e2005+ Super Duty Unit Bearing\u003c\/th\u003e\n        \u003c\/tr\u003e\n      \u003c\/thead\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eBearing Service\u003c\/td\u003e\n          \u003ctd\u003ePeriodic repacking \u0026amp; preload required\u003c\/td\u003e\n          \u003ctd\u003eSealed assembly (Maintenance-free)\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eReplacement Workflow\u003c\/td\u003e\n          \u003ctd\u003eMultiple loose components \u0026amp; seals\u003c\/td\u003e\n          \u003ctd\u003eComplete bolt-on assembly\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eTrail Serviceability\u003c\/td\u003e\n          \u003ctd\u003eComplex field disassembly\u003c\/td\u003e\n          \u003ctd\u003eFast, simple bolt-on replacement\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003ePrimary Application\u003c\/td\u003e\n          \u003ctd\u003eRestorations \u0026amp; traditional kingpin builds\u003c\/td\u003e\n          \u003ctd\u003eModern competition \u0026amp; extreme off-road builds\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n  \u003csummary\u003e\n    \u003cstrong\u003eFAQ\u003c\/strong\u003e\n    \u003cspan class=\"svg-wrapper icon-plus\"\u003e\n      \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n        \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n      \u003c\/svg\u003e\n    \u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv class=\"details-content rte\"\u003e\n    \u003ch3\u003e1. Why convert a Dana 60 from traditional spindle hubs to a 2005+ Super Duty unit bearing?\u003c\/h3\u003e\n    \u003cp\u003eTraditional Dana 60 hubs require regular maintenance, including greasing wheel bearings, setting spindle nut preload, and replacing inner wheel seals. Converting to a 2005+ Super Duty unit bearing provides a completely sealed, maintenance-free hub assembly with higher load capacity. If a bearing ever fails on the trail or in the pits, the entire unit can be swapped out in minutes as a single bolt-on assembly.\u003c\/p\u003e\n\n    \u003ch3\u003e2. Is this a genuine Timken bearing assembly?\u003c\/h3\u003e\n    \u003cp\u003eYes. Every hub starts as a brand new, genuine Timken 2005+ Ford Super Duty unit bearing assembly. It is then precision-machined in-house to an off-road standard 8 on 6.5\" wheel bolt pattern and fitted with upgraded wheel studs.\u003c\/p\u003e\n\n    \u003ch3\u003e3. Why is the factory ABS sensor port blocked off?\u003c\/h3\u003e\n    \u003cp\u003eFactory Ford Super Duty trucks use an ABS sensor plugged into the top of the unit bearing. Because custom rock crawlers, Ultra4 cars, and competition buggies do not use factory ABS systems, leaving the sensor port open or using a broken sensor can allow water, mud, and debris to contaminate the internal bearing grease. We install a billet ABS block-off fitting to permanently seal and protect the internals.\u003c\/p\u003e\n\n    \u003ch3\u003e4. What size wheel studs come installed in this unit bearing?\u003c\/h3\u003e\n    \u003cp\u003eWe install heavy-duty \u003cstrong\u003e9\/16\" wheel studs\u003c\/strong\u003e into the newly machined 8 on 6.5\" bolt circle. These provide superior clamping force and shear strength compared to smaller wheel studs when running heavy beadlock wheels and 40- to 47-inch tires.\u003c\/p\u003e\n\n    \u003ch3\u003e5. Will this unit bearing fit Reid Racing or Crane Axle steering knuckles?\u003c\/h3\u003e\n    \u003cp\u003eYes. This modified unit bearing is designed as a direct drop-in fit for custom steering knuckles built around the 2005+ Ford Super Duty hub profile, including Reid Racing Super Kingpin knuckles, Crane Axle Magnum Knuckle systems, and custom fabricated axle end cups.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e","brand":"Wide Open Design","offers":[{"title":"Default Title","offer_id":54640091627795,"sku":"WA01055","price":594.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/WA01055-Timken-Super-Duty-Unit-Bearing-1.jpg?v=1788282268"}],"url":"https:\/\/kohparts.com\/collections\/unit-bearings-drive-flanges-parts.oembed","provider":"KOHParts.com","version":"1.0","type":"link"}