{"title":"Fabrication Parts: Bump Stop Cans, Mounts, \u0026 Parts","description":"\u003cp\u003eFabrication Bump Stop Mounts brings together bump-stop cans, mounts, and related fabrication parts for fabricators integrating bump-stop assemblies into custom off-road suspension. The mounting arrangement determines where the stop sits and how the suspension reaches its contact point. Compare the can diameter, mounting dimensions, and intended bump-stop application with the unit you plan to use. Clearance and load paths should be reviewed across the full travel range. This collection focuses on the fabrication surrounding bump control, helping you place the supporting pieces within the axle or chassis layout before final welding and assembly of the suspension. Explore the fabrication bump stop mounts listings to compare the details relevant to your vehicle and the work ahead.\u003c\/p\u003e","products":[{"product_id":"radflo-2-0-bump-stop-slapper-kit","title":"Radflo 2.0 Bump Stop Slapper Kit","description":"\u003cp\u003eThe Radflo 2.0 Bump Stop Slapper Kit is designed to provide controlled bottom-out contact for Radflo 2.0 shock and bump stop applications. This kit helps absorb and distribute impact forces during full suspension compression, protecting shock components and chassis mounting points from excessive stress.\u003c\/p\u003e\n\u003cp\u003eIdeal for aggressive off-road builds, rock crawlers, prerunners, and competition vehicles, the slapper pad cushions hard impacts while maintaining predictable suspension behavior.\u003c\/p\u003e\n\u003cp\u003eWhether you're refreshing worn components or completing a new build, this direct-fit kit ensures proper bump stop engagement and long-term durability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRadflo 2.0 Bump Stop Slapper Pad\u003c\/li\u003e\n\u003cli\u003eRequired Mounting Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSold as a Kit.\u003c\/strong\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003cul\u003e\n\u003cli\u003ePart Number: KT-SP-501-1 or KT-SP-501\u003c\/li\u003e\n\u003cli\u003eCompatibility: Radflo 2.0 Shock \/ Bump Stop Applications\u003c\/li\u003e\n\u003cli\u003eComponent Type: Bump Stop Slapper Kit\u003c\/li\u003e\n\u003cli\u003eApplication: Bottom-Out Cushioning \u0026amp; Impact Protection\u003c\/li\u003e\n\u003cli\u003eUse: Replacement or New Installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003cul\u003e\n\u003cli\u003eFits:\u003c\/li\u003e\n\u003cli\u003eRadflo 2.0 Shock Applications\u003c\/li\u003e\n\u003cli\u003eRadflo 2.0 Bump Stop Setups\u003c\/li\u003e\n\u003cli\u003eVerify mounting configuration and clearance prior to installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eTech Insight\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003cp\u003eA properly functioning bump stop system prevents harsh metal-to-metal contact at full compression. The slapper pad absorbs and spreads impact energy, reducing stress on shock shafts, mounts, and chassis brackets.\u003c\/p\u003e\n\u003cp\u003eIn high-speed desert racing or aggressive rock crawling, repeated bottom-outs can fatigue suspension components. Installing or replacing bump stop slapper components helps maintain consistent suspension performance and extends the life of your shock system.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e","brand":"Radflo Suspension","offers":[{"title":"Large","offer_id":54641735205139,"sku":"KT-SP-501-1","price":47.75,"currency_code":"USD","in_stock":true},{"title":"Small","offer_id":54641735237907,"sku":"KT-SP-501","price":43.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/KT-SP-501-1-Radflo-2.0-Bump-Stop-Slapper-Kit-1.jpg?v=1788289165"},{"product_id":"2-bump-stop-can","title":"WOD Tall Bump Stop Can - For 2\", 3\", \u0026 4\" Travel","description":"\u003cp\u003e\u003cstrong\u003eThe WOD 2\" Tall Bump Stop Can\u003c\/strong\u003e provides a strong, weld-ready solution for mounting most \u003cstrong\u003e2-inch hydraulic or air bump stops\u003c\/strong\u003e in long-travel suspension systems. Manufactured from precision laser-cut DOM steel tubing, this full-length bump stop can eliminates the time and guesswork of fabricating your own housing while ensuring accurate fitment and smooth bump stop operation.\u003c\/p\u003e\n\u003cp\u003eDesigned for rock crawlers, Ultra4 race cars, rock bouncers, prerunners, and custom tube chassis builds, this bump stop can delivers the strength and durability needed for severe off-road abuse. The taller design accommodates longer-travel bump stops while providing proper support and alignment for consistent suspension performance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) 2\" Tall Air\/Hydraulic Bump Stop Can\u003c\/li\u003e\n\u003cli\u003eMounting Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eWide Open Design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eDOM Steel Tubing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturing\u003c\/td\u003e\n\u003ctd\u003ePrecision Laser Cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStyle\u003c\/td\u003e\n\u003ctd\u003eStandard-Length Weld-On Bump Stop Can\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Bump Stops\u003c\/td\u003e\n\u003ctd\u003eMost 2\" Hydraulic or Air Bump Stops\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTravel Compatibility\u003c\/td\u003e\n\u003ctd\u003e2\", 3\", and 4\" Travel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eWeld-Ready\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003eMounting Hardware Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eMade in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003cp\u003e\u003cstrong\u003eUniversal Fitment for Custom Fabrication\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible With:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFOX 2.0 Air Bump Stops\u003c\/li\u003e\n\u003cli\u003eKing 2.0 Air Bump Stops\u003c\/li\u003e\n\u003cli\u003eRadflo 2.0 Air Bump Stops\u003c\/li\u003e\n\u003cli\u003eADS 2.0 Air Bump Stops\u003c\/li\u003e\n\u003cli\u003eORI 2\" Bump Stops\u003c\/li\u003e\n\u003cli\u003eMost compatible 2\" hydraulic or air bump stops\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eIdeal Applications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRock crawlers\u003c\/li\u003e\n\u003cli\u003eRock bouncers\u003c\/li\u003e\n\u003cli\u003eUltra4 race cars\u003c\/li\u003e\n\u003cli\u003eDesert race vehicles\u003c\/li\u003e\n\u003cli\u003ePrerunners\u003c\/li\u003e\n\u003cli\u003eLong-travel suspension systems\u003c\/li\u003e\n\u003cli\u003eFront or rear bump stop mounts\u003c\/li\u003e\n\u003cli\u003eShock towers\u003c\/li\u003e\n\u003cli\u003eCustom tube chassis fabrication\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for most 2\" hydraulic or air bump stops.\u003c\/li\u003e\n\u003cli\u003eIdeal for applications requiring standard-length bump stop cans.\u003c\/li\u003e\n\u003cli\u003eVerify bump stop placement and suspension travel before final welding.\u003c\/li\u003e\n\u003cli\u003eWelding and fabrication are required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eTech Insight\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ch3\u003eWhy use a bump stop can?\u003c\/h3\u003e\n\u003cp\u003eA bump stop can provides a precise, weld-in housing that properly supports a hydraulic or air bump stop. Proper alignment helps ensure smooth operation, consistent bump engagement, and maximum suspension performance.\u003c\/p\u003e\n\u003ch3\u003eWhich bump stops fit this can?\u003c\/h3\u003e\n\u003cp\u003eThis can is designed for most 2-inch hydraulic or air bump stops, including popular models from FOX, King, Radflo, ADS, ORI, and similar manufacturers.\u003c\/p\u003e\n\u003ch3\u003eWhy is DOM tubing used?\u003c\/h3\u003e\n\u003cp\u003eDOM (Drawn Over Mandrel) steel tubing offers excellent dimensional accuracy, strength, and a smooth internal surface, allowing the bump stop to slide freely while providing exceptional durability in harsh off-road environments.\u003c\/p\u003e\n\u003ch3\u003eShould I choose the tall or short bump stop can?\u003c\/h3\u003e\n\u003cp\u003eThe tall bump stop can is recommended for most suspension systems using 2\", 3\", or 4\" travel bump stops. If packaging space is limited around shock towers, upper links, or trusses, the WOD Short Bump Stop Can is often the better choice.\u003c\/p\u003e\n\u003ch3\u003eWhen should final welding be completed?\u003c\/h3\u003e\n\u003cp\u003eAlways tack weld the bump stop can in position first, cycle the suspension through its full range of travel, verify bump stop engagement and alignment, and then complete the final welds after confirming proper fitment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e","brand":"Wide Open Design","offers":[{"title":"Default Title","offer_id":54641742709011,"sku":"WA01041","price":47.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/WA01041-2-Weld-On-Bump-Stop-Can-1_0ed52705-5992-4448-b2d2-04a246c54f88.jpg?v=1790869462"},{"product_id":"king-shocks-2-0in-x-4in-bump-stop-mounting-sleeve","title":"King Shocks 2.0in X 4in Bump Stop Mounting Sleeve","description":"\u003cp\u003eThe \u003cstrong\u003eKing 2.0 in. Bump Stop Mounting Sleeve for 4 in. Travel\u003c\/strong\u003e is the mounting component for a custom King bump-stop installation. The sleeve gives the matching bump stop a dedicated mount in your chassis. Choose this part for the correct 2.0-inch body and mounting style, then place it where the suspension can load the bump stop cleanly near full compression.\u003c\/p\u003e\n\u003cp\u003eMock up the bump stop, mount, and strike pad while cycling the suspension before committing to the final location. Leave room for tire clearance, steering, and axle articulation, and plan access for future service. The mount and the structure behind it both need to carry the force of a hard hit; this part does not turn a thin or poorly supported bracket into a finished suspension mount.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) King 2.0 in. Bump Stop Mounting Sleeve for 4 in. Travel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Bump stop sold separately. This listing is for the mounting component.\u003c\/p\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\u003csummary\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eKing Shocks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e20AB422-103\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eBump Stop Mounting Sleeve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Bump Stop Body Size\u003c\/td\u003e\n\u003ctd\u003e2.0 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Nominal Travel\u003c\/td\u003e\n\u003ctd\u003e4 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShock Body Diameter\u003c\/td\u003e\n\u003ctd\u003e2.0\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKing Configuration\u003c\/td\u003e\n\u003ctd\u003e4 IN (SLEEVE)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003eIndividual\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\u003csummary\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eCustom King bump-stop installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Body Size\u003c\/td\u003e\n\u003ctd\u003e2.0 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eComponent\u003c\/td\u003e\n\u003ctd\u003eMounting sleeve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBump Stop Configuration\u003c\/td\u003e\n\u003ctd\u003e4 in. nominal travel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMatch the bump stop body, mounting style, and listed travel configuration before building the mount.\u003c\/li\u003e\n\u003cli\u003eA shared body diameter does not guarantee that every bump stop or sleeve in that size is interchangeable.\u003c\/li\u003e\n\u003cli\u003eMock up the contact point through full axle movement so the bump stop meets the strike pad correctly.\u003c\/li\u003e\n\u003cli\u003eUse a properly reinforced chassis attachment and retain access for removal and service.\u003c\/li\u003e\n\u003cli\u003eFor weld-in mounts, remove the bump stop before welding so welding heat cannot damage the seals or charged assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\u003csummary\u003e\u003cstrong\u003eFAQs\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"details-content rte\"\u003e\n\u003ch3\u003eDoes this include a hydraulic bump stop?\u003c\/h3\u003e\n\u003cp\u003eNo. This is the mounting component. Order the matching bump stop separately.\u003c\/p\u003e\n\u003ch3\u003eWill it fit any bump stop with the same body diameter?\u003c\/h3\u003e\n\u003cp\u003eDo not select it by diameter alone. The body length, mounting design, and intended bump-stop configuration also need to match.\u003c\/p\u003e\n\u003ch3\u003eWhere should the mount be placed?\u003c\/h3\u003e\n\u003cp\u003eCycle the suspension and establish full bump first. Position the bump stop and strike pad so they make controlled contact before the main shock, tire, or axle reaches an unwanted hard stop.\u003c\/p\u003e\n\u003ch3\u003eCan I weld the sleeve with the bump stop installed?\u003c\/h3\u003e\n\u003cp\u003eRemove the bump stop before welding. Finish the mount, let it cool, and inspect its fit before installing the charged component.\u003c\/p\u003e\n\u003ch3\u003eWhat should I inspect after the first trail run?\u003c\/h3\u003e\n\u003cp\u003eLook for loose hardware, movement at the mount, uneven marks on the contact pad, and signs of tire or link contact. Address those issues before harder use.\u003c\/p\u003e\n\n\u003c\/div\u003e\u003c\/details\u003e\n\u003chr\u003e","brand":"King Shocks","offers":[{"title":"Default Title","offer_id":67562157244691,"sku":"20AB422-103","price":49.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/F198654384.png?v=1791235284"},{"product_id":"king-shocks-2-5-bump-stop-4in","title":"King Shocks 2.5 Bump Stop 4in","description":"\u003cp\u003eThe \u003cstrong\u003eKing 2.5 x 4 in. Hydraulic Bump Stop\u003c\/strong\u003e helps slow the last part of suspension compression before a hard hit reaches the chassis. Its 2.5-inch body and 4-inch nominal travel let you plan a controlled bump zone into a custom suspension instead of relying on the main shock to stop the axle. It works alongside the springs and shocks; it does not replace either one.\u003c\/p\u003e\n\u003cp\u003eBuild the mount around the bump stop and its matching sleeve, with solid support behind the contact pad. Set the contact point by cycling the suspension with the actual tires and links in place. The goal is to bring the bump stop into the hit before the shock bottoms or the tire reaches the body, without giving away useful suspension movement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) King 2.5 x 4 in. Hydraulic Bump Stop\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Sold individually according to King's product listing. Mounting parts must be selected for this bump-stop configuration.\u003c\/p\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\u003csummary\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eKing Shocks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eBS2540\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eHydraulic Bump Stop\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Body Size\u003c\/td\u003e\n\u003ctd\u003e2.5 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Travel\u003c\/td\u003e\n\u003ctd\u003e4 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompressed Length (in.)\u003c\/td\u003e\n\u003ctd\u003e11.207\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtended Length (in.)\u003c\/td\u003e\n\u003ctd\u003e15.205\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKing Listed Stroke (in.)\u003c\/td\u003e\n\u003ctd\u003e4.000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShock Body Diameter\u003c\/td\u003e\n\u003ctd\u003e2.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003eIndividual\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\u003csummary\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eUniversal custom suspension; fabricated mounts required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTypical Builds\u003c\/td\u003e\n\u003ctd\u003eCustom trail rigs, race trucks, buggies, and tube chassis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eHydraulic control near full suspension compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLocate the strike pad and mount with the suspension at full bump, then cycle it through articulation and steering.\u003c\/li\u003e\n\u003cli\u003eMatch the mount or sleeve to the exact bump-stop body and mounting configuration.\u003c\/li\u003e\n\u003cli\u003eThe mounting structure must support repeated compression loads without bending or moving.\u003c\/li\u003e\n\u003cli\u003eSet engagement to protect shock compression travel and tire clearance. Recheck both sides of the axle through articulation.\u003c\/li\u003e\n\u003cli\u003eUse King's setup guidance for nitrogen charging and tuning; do not copy a pressure setting from an unrelated vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\u003csummary\u003e\u003cstrong\u003eFAQs\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"details-content rte\"\u003e\n\u003ch3\u003eWhat does a hydraulic bump stop add?\u003c\/h3\u003e\n\u003cp\u003eIt provides damping near the end of compression travel, helping the suspension deal with a hard hit before reaching its final stop. Correct placement matters as much as the part itself.\u003c\/p\u003e\n\u003ch3\u003eWill this replace my main shocks?\u003c\/h3\u003e\n\u003cp\u003eNo. Main shocks control normal suspension movement. The bump stop is there to manage the final part of compression.\u003c\/p\u003e\n\u003ch3\u003eHow do I decide when it should contact the axle?\u003c\/h3\u003e\n\u003cp\u003eCycle the suspension to establish the safe compression limit, including shock length and tire clearance. Work backward from that point so the bump stop has usable stroke before anything else reaches a hard stop.\u003c\/p\u003e\n\u003ch3\u003eDoes body size tell me which mounting sleeve to order?\u003c\/h3\u003e\n\u003cp\u003eIt is only part of the match. Check the exact bump-stop configuration, body length, mounting style, and sleeve or bracket part number.\u003c\/p\u003e\n\u003ch3\u003eIs this sold as a pair?\u003c\/h3\u003e\n\u003cp\u003eKing lists this part number as an individual component. Order the quantity required for your suspension layout.\u003c\/p\u003e\n\n\u003c\/div\u003e\u003c\/details\u003e\n\u003chr\u003e","brand":"King Shocks","offers":[{"title":"Default Title","offer_id":67562157310227,"sku":"BS2540","price":360.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/F198654398.png?v=1791235272"},{"product_id":"king-shocks-2-0-compact-bump-stop-2in-sleeve","title":"King Shocks 2.0 Compact Bump Stop 2in (Sleeve)","description":"\u003cp\u003eThe \u003cstrong\u003eKing 2.0 in. Compact Bump Stop Mounting Sleeve for 2 in. Travel\u003c\/strong\u003e is the mounting component for a custom King bump-stop installation. The sleeve gives the matching bump stop a dedicated mount in your chassis. Choose this part for the correct 2.0-inch body and mounting style, then place it where the suspension can load the bump stop cleanly near full compression.\u003c\/p\u003e\n\u003cp\u003eMock up the bump stop, mount, and strike pad while cycling the suspension before committing to the final location. Leave room for tire clearance, steering, and axle articulation, and plan access for future service. The mount and the structure behind it both need to carry the force of a hard hit; this part does not turn a thin or poorly supported bracket into a finished suspension mount.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) King 2.0 in. Compact Bump Stop Mounting Sleeve for 2 in. Travel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Bump stop sold separately. This listing is for the mounting component.\u003c\/p\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\u003csummary\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eKing Shocks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e20AB424-007\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eBump Stop Mounting Sleeve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Bump Stop Body Size\u003c\/td\u003e\n\u003ctd\u003e2.0 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Nominal Travel\u003c\/td\u003e\n\u003ctd\u003e2 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShock Body Diameter\u003c\/td\u003e\n\u003ctd\u003e2.0\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKing Configuration\u003c\/td\u003e\n\u003ctd\u003e2 IN (SLEEVE)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003eIndividual\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBody Configuration\u003c\/td\u003e\n\u003ctd\u003eCompact\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\u003csummary\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eCustom King bump-stop installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Body Size\u003c\/td\u003e\n\u003ctd\u003e2.0 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eComponent\u003c\/td\u003e\n\u003ctd\u003eMounting sleeve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBump Stop Configuration\u003c\/td\u003e\n\u003ctd\u003e2 in. nominal travel; compact body\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMatch the bump stop body, mounting style, and listed travel configuration before building the mount.\u003c\/li\u003e\n\u003cli\u003eA shared body diameter does not guarantee that every bump stop or sleeve in that size is interchangeable.\u003c\/li\u003e\n\u003cli\u003eMock up the contact point through full axle movement so the bump stop meets the strike pad correctly.\u003c\/li\u003e\n\u003cli\u003eUse a properly reinforced chassis attachment and retain access for removal and service.\u003c\/li\u003e\n\u003cli\u003eFor weld-in mounts, remove the bump stop before welding so welding heat cannot damage the seals or charged assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\u003csummary\u003e\u003cstrong\u003eFAQs\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"details-content rte\"\u003e\n\u003ch3\u003eDoes this include a hydraulic bump stop?\u003c\/h3\u003e\n\u003cp\u003eNo. This is the mounting component. Order the matching bump stop separately.\u003c\/p\u003e\n\u003ch3\u003eWill it fit any bump stop with the same body diameter?\u003c\/h3\u003e\n\u003cp\u003eDo not select it by diameter alone. The body length, mounting design, and intended bump-stop configuration also need to match.\u003c\/p\u003e\n\u003ch3\u003eWhere should the mount be placed?\u003c\/h3\u003e\n\u003cp\u003eCycle the suspension and establish full bump first. Position the bump stop and strike pad so they make controlled contact before the main shock, tire, or axle reaches an unwanted hard stop.\u003c\/p\u003e\n\u003ch3\u003eCan I weld the sleeve with the bump stop installed?\u003c\/h3\u003e\n\u003cp\u003eRemove the bump stop before welding. Finish the mount, let it cool, and inspect its fit before installing the charged component.\u003c\/p\u003e\n\u003ch3\u003eWhat should I inspect after the first trail run?\u003c\/h3\u003e\n\u003cp\u003eLook for loose hardware, movement at the mount, uneven marks on the contact pad, and signs of tire or link contact. Address those issues before harder use.\u003c\/p\u003e\n\n\u003c\/div\u003e\u003c\/details\u003e\n\u003chr\u003e","brand":"King Shocks","offers":[{"title":"Default Title","offer_id":67562157342995,"sku":"20AB424-007","price":19.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/F198654386.png?v=1791235179"},{"product_id":"king-shocks-2-5-bump-stop-4in-sleeve-weld-in4130","title":"King Shocks 2.5 Bump Stop 4in (Sleeve) - Weld in(4130)","description":"\u003cp\u003eThe \u003cstrong\u003eKing 2.5 in. Bump Stop Mounting Sleeve for 4 in. Travel\u003c\/strong\u003e is the mounting component for a custom King bump-stop installation. The sleeve gives the matching bump stop a dedicated mount in your chassis. Choose this part for the correct 2.5-inch body and mounting style, then place it where the suspension can load the bump stop cleanly near full compression.\u003c\/p\u003e\n\u003cp\u003eMock up the bump stop, mount, and strike pad while cycling the suspension before committing to the final location. Leave room for tire clearance, steering, and axle articulation, and plan access for future service. The mount and the structure behind it both need to carry the force of a hard hit; this part does not turn a thin or poorly supported bracket into a finished suspension mount.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) King 2.5 in. Bump Stop Mounting Sleeve for 4 in. Travel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Bump stop sold separately. This listing is for the mounting component.\u003c\/p\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\u003csummary\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eKing Shocks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e25AB414-103\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eBump Stop Mounting Sleeve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Bump Stop Body Size\u003c\/td\u003e\n\u003ctd\u003e2.5 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Nominal Travel\u003c\/td\u003e\n\u003ctd\u003e4 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShock Body Diameter\u003c\/td\u003e\n\u003ctd\u003e2.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKing Configuration\u003c\/td\u003e\n\u003ctd\u003e4 IN (SLEEVE)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003eIndividual\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\u003csummary\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eCustom King bump-stop installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Body Size\u003c\/td\u003e\n\u003ctd\u003e2.5 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eComponent\u003c\/td\u003e\n\u003ctd\u003eMounting sleeve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBump Stop Configuration\u003c\/td\u003e\n\u003ctd\u003e4 in. nominal travel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMatch the bump stop body, mounting style, and listed travel configuration before building the mount.\u003c\/li\u003e\n\u003cli\u003eA shared body diameter does not guarantee that every bump stop or sleeve in that size is interchangeable.\u003c\/li\u003e\n\u003cli\u003eMock up the contact point through full axle movement so the bump stop meets the strike pad correctly.\u003c\/li\u003e\n\u003cli\u003eUse a properly reinforced chassis attachment and retain access for removal and service.\u003c\/li\u003e\n\u003cli\u003eFor weld-in mounts, remove the bump stop before welding so welding heat cannot damage the seals or charged assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\u003csummary\u003e\u003cstrong\u003eFAQs\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"details-content rte\"\u003e\n\u003ch3\u003eDoes this include a hydraulic bump stop?\u003c\/h3\u003e\n\u003cp\u003eNo. This is the mounting component. Order the matching bump stop separately.\u003c\/p\u003e\n\u003ch3\u003eWill it fit any bump stop with the same body diameter?\u003c\/h3\u003e\n\u003cp\u003eDo not select it by diameter alone. The body length, mounting design, and intended bump-stop configuration also need to match.\u003c\/p\u003e\n\u003ch3\u003eWhere should the mount be placed?\u003c\/h3\u003e\n\u003cp\u003eCycle the suspension and establish full bump first. Position the bump stop and strike pad so they make controlled contact before the main shock, tire, or axle reaches an unwanted hard stop.\u003c\/p\u003e\n\u003ch3\u003eCan I weld the sleeve with the bump stop installed?\u003c\/h3\u003e\n\u003cp\u003eRemove the bump stop before welding. Finish the mount, let it cool, and inspect its fit before installing the charged component.\u003c\/p\u003e\n\u003ch3\u003eWhat should I inspect after the first trail run?\u003c\/h3\u003e\n\u003cp\u003eLook for loose hardware, movement at the mount, uneven marks on the contact pad, and signs of tire or link contact. Address those issues before harder use.\u003c\/p\u003e\n\n\u003c\/div\u003e\u003c\/details\u003e\n\u003chr\u003e","brand":"King Shocks","offers":[{"title":"Default Title","offer_id":67562157441299,"sku":"25AB414-103","price":52.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/F198653789.png?v=1791235274"},{"product_id":"king-shocks-2-0-bump-stop-2in-long-cyl","title":"King Shocks 2.0 Bump Stop 2in (Long Cyl)","description":"\u003cp\u003eThe \u003cstrong\u003eKing 2.0 x 2 in. Hydraulic Bump Stop\u003c\/strong\u003e helps slow the last part of suspension compression before a hard hit reaches the chassis. Its 2.0-inch body and 2-inch nominal travel let you plan a controlled bump zone into a custom suspension instead of relying on the main shock to stop the axle. It works alongside the springs and shocks; it does not replace either one.\u003c\/p\u003e\n\u003cp\u003eBuild the mount around the bump stop and its matching sleeve, with solid support behind the contact pad. Set the contact point by cycling the suspension with the actual tires and links in place. The goal is to bring the bump stop into the hit before the shock bottoms or the tire reaches the body, without giving away useful suspension movement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) King 2.0 x 2 in. Hydraulic Bump Stop\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Sold individually according to King's product listing. Mounting parts must be selected for this bump-stop configuration.\u003c\/p\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\u003csummary\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eKing Shocks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eBS2042\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eHydraulic Bump Stop\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Body Size\u003c\/td\u003e\n\u003ctd\u003e2.0 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Travel\u003c\/td\u003e\n\u003ctd\u003e2 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompressed Length (in.)\u003c\/td\u003e\n\u003ctd\u003e10.656\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtended Length (in.)\u003c\/td\u003e\n\u003ctd\u003e12.653\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKing Listed Stroke (in.)\u003c\/td\u003e\n\u003ctd\u003e2.000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShock Body Diameter\u003c\/td\u003e\n\u003ctd\u003e2.0\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003eIndividual\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBody Configuration\u003c\/td\u003e\n\u003ctd\u003eLong cylinder\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\u003csummary\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eUniversal custom suspension; fabricated mounts required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTypical Builds\u003c\/td\u003e\n\u003ctd\u003eCustom trail rigs, race trucks, buggies, and tube chassis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eHydraulic control near full suspension compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLocate the strike pad and mount with the suspension at full bump, then cycle it through articulation and steering.\u003c\/li\u003e\n\u003cli\u003eMatch the mount or sleeve to the exact bump-stop body and mounting configuration.\u003c\/li\u003e\n\u003cli\u003eThe mounting structure must support repeated compression loads without bending or moving.\u003c\/li\u003e\n\u003cli\u003eSet engagement to protect shock compression travel and tire clearance. Recheck both sides of the axle through articulation.\u003c\/li\u003e\n\u003cli\u003eUse King's setup guidance for nitrogen charging and tuning; do not copy a pressure setting from an unrelated vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\u003csummary\u003e\u003cstrong\u003eFAQs\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"details-content rte\"\u003e\n\u003ch3\u003eWhat does a hydraulic bump stop add?\u003c\/h3\u003e\n\u003cp\u003eIt provides damping near the end of compression travel, helping the suspension deal with a hard hit before reaching its final stop. Correct placement matters as much as the part itself.\u003c\/p\u003e\n\u003ch3\u003eWill this replace my main shocks?\u003c\/h3\u003e\n\u003cp\u003eNo. Main shocks control normal suspension movement. The bump stop is there to manage the final part of compression.\u003c\/p\u003e\n\u003ch3\u003eHow do I decide when it should contact the axle?\u003c\/h3\u003e\n\u003cp\u003eCycle the suspension to establish the safe compression limit, including shock length and tire clearance. Work backward from that point so the bump stop has usable stroke before anything else reaches a hard stop.\u003c\/p\u003e\n\u003ch3\u003eDoes body size tell me which mounting sleeve to order?\u003c\/h3\u003e\n\u003cp\u003eIt is only part of the match. Check the exact bump-stop configuration, body length, mounting style, and sleeve or bracket part number.\u003c\/p\u003e\n\u003ch3\u003eIs this sold as a pair?\u003c\/h3\u003e\n\u003cp\u003eKing lists this part number as an individual component. Order the quantity required for your suspension layout.\u003c\/p\u003e\n\n\u003c\/div\u003e\u003c\/details\u003e\n\u003chr\u003e","brand":"King Shocks","offers":[{"title":"Default Title","offer_id":67562157474067,"sku":"BS2042","price":308.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/F198654390.png?v=1791235222"},{"product_id":"king-shocks-2-5-bump-stop-2-5in-sleeve-weld-in4130","title":"King Shocks 2.5 Bump Stop 2.5in (Sleeve) - Weld in(4130)","description":"\u003cp\u003eThe \u003cstrong\u003eKing 2.5 in. Bump Stop Mounting Sleeve for 2.5 in. Travel\u003c\/strong\u003e is the mounting component for a custom King bump-stop installation. The sleeve gives the matching bump stop a dedicated mount in your chassis. Choose this part for the correct 2.5-inch body and mounting style, then place it where the suspension can load the bump stop cleanly near full compression.\u003c\/p\u003e\n\u003cp\u003eMock up the bump stop, mount, and strike pad while cycling the suspension before committing to the final location. Leave room for tire clearance, steering, and axle articulation, and plan access for future service. The mount and the structure behind it both need to carry the force of a hard hit; this part does not turn a thin or poorly supported bracket into a finished suspension mount.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) King 2.5 in. Bump Stop Mounting Sleeve for 2.5 in. Travel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Bump stop sold separately. This listing is for the mounting component.\u003c\/p\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\u003csummary\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eKing Shocks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e25AB414-104\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eBump Stop Mounting Sleeve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Bump Stop Body Size\u003c\/td\u003e\n\u003ctd\u003e2.5 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Nominal Travel\u003c\/td\u003e\n\u003ctd\u003e2.5 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShock Body Diameter\u003c\/td\u003e\n\u003ctd\u003e2.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKing Configuration\u003c\/td\u003e\n\u003ctd\u003e2-1\/2 IN (SLEEVE)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003eIndividual\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\u003csummary\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eCustom King bump-stop installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Body Size\u003c\/td\u003e\n\u003ctd\u003e2.5 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eComponent\u003c\/td\u003e\n\u003ctd\u003eMounting sleeve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBump Stop Configuration\u003c\/td\u003e\n\u003ctd\u003e2.5 in. nominal travel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMatch the bump stop body, mounting style, and listed travel configuration before building the mount.\u003c\/li\u003e\n\u003cli\u003eA shared body diameter does not guarantee that every bump stop or sleeve in that size is interchangeable.\u003c\/li\u003e\n\u003cli\u003eMock up the contact point through full axle movement so the bump stop meets the strike pad correctly.\u003c\/li\u003e\n\u003cli\u003eUse a properly reinforced chassis attachment and retain access for removal and service.\u003c\/li\u003e\n\u003cli\u003eFor weld-in mounts, remove the bump stop before welding so welding heat cannot damage the seals or charged assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\u003csummary\u003e\u003cstrong\u003eFAQs\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"details-content rte\"\u003e\n\u003ch3\u003eDoes this include a hydraulic bump stop?\u003c\/h3\u003e\n\u003cp\u003eNo. This is the mounting component. Order the matching bump stop separately.\u003c\/p\u003e\n\u003ch3\u003eWill it fit any bump stop with the same body diameter?\u003c\/h3\u003e\n\u003cp\u003eDo not select it by diameter alone. The body length, mounting design, and intended bump-stop configuration also need to match.\u003c\/p\u003e\n\u003ch3\u003eWhere should the mount be placed?\u003c\/h3\u003e\n\u003cp\u003eCycle the suspension and establish full bump first. Position the bump stop and strike pad so they make controlled contact before the main shock, tire, or axle reaches an unwanted hard stop.\u003c\/p\u003e\n\u003ch3\u003eCan I weld the sleeve with the bump stop installed?\u003c\/h3\u003e\n\u003cp\u003eRemove the bump stop before welding. Finish the mount, let it cool, and inspect its fit before installing the charged component.\u003c\/p\u003e\n\u003ch3\u003eWhat should I inspect after the first trail run?\u003c\/h3\u003e\n\u003cp\u003eLook for loose hardware, movement at the mount, uneven marks on the contact pad, and signs of tire or link contact. Address those issues before harder use.\u003c\/p\u003e\n\n\u003c\/div\u003e\u003c\/details\u003e\n\u003chr\u003e","brand":"King Shocks","offers":[{"title":"Default Title","offer_id":67562157506835,"sku":"25AB414-104","price":52.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/F198654396.png?v=1791235272"},{"product_id":"king-shocks-2-0-bump-stop-3in","title":"King Shocks 2.0 Bump Stop 3in","description":"\u003cp\u003eThe \u003cstrong\u003eKing 2.0 x 3 in. Hydraulic Bump Stop\u003c\/strong\u003e helps slow the last part of suspension compression before a hard hit reaches the chassis. Its 2.0-inch body and 3-inch nominal travel let you plan a controlled bump zone into a custom suspension instead of relying on the main shock to stop the axle. It works alongside the springs and shocks; it does not replace either one.\u003c\/p\u003e\n\u003cp\u003eBuild the mount around the bump stop and its matching sleeve, with solid support behind the contact pad. Set the contact point by cycling the suspension with the actual tires and links in place. The goal is to bring the bump stop into the hit before the shock bottoms or the tire reaches the body, without giving away useful suspension movement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) King 2.0 x 3 in. Hydraulic Bump Stop\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Sold individually according to King's product listing. Mounting parts must be selected for this bump-stop configuration.\u003c\/p\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\u003csummary\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eKing Shocks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eBS2043\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eHydraulic Bump Stop\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Body Size\u003c\/td\u003e\n\u003ctd\u003e2.0 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Travel\u003c\/td\u003e\n\u003ctd\u003e3 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompressed Length (in.)\u003c\/td\u003e\n\u003ctd\u003e10.656\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtended Length (in.)\u003c\/td\u003e\n\u003ctd\u003e13.653\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKing Listed Stroke (in.)\u003c\/td\u003e\n\u003ctd\u003e3.000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShock Body Diameter\u003c\/td\u003e\n\u003ctd\u003e2.0\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003eIndividual\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\u003csummary\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eUniversal custom suspension; fabricated mounts required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTypical Builds\u003c\/td\u003e\n\u003ctd\u003eCustom trail rigs, race trucks, buggies, and tube chassis\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eHydraulic control near full suspension compression\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLocate the strike pad and mount with the suspension at full bump, then cycle it through articulation and steering.\u003c\/li\u003e\n\u003cli\u003eMatch the mount or sleeve to the exact bump-stop body and mounting configuration.\u003c\/li\u003e\n\u003cli\u003eThe mounting structure must support repeated compression loads without bending or moving.\u003c\/li\u003e\n\u003cli\u003eSet engagement to protect shock compression travel and tire clearance. Recheck both sides of the axle through articulation.\u003c\/li\u003e\n\u003cli\u003eUse King's setup guidance for nitrogen charging and tuning; do not copy a pressure setting from an unrelated vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\u003csummary\u003e\u003cstrong\u003eFAQs\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"details-content rte\"\u003e\n\u003ch3\u003eWhat does a hydraulic bump stop add?\u003c\/h3\u003e\n\u003cp\u003eIt provides damping near the end of compression travel, helping the suspension deal with a hard hit before reaching its final stop. Correct placement matters as much as the part itself.\u003c\/p\u003e\n\u003ch3\u003eWill this replace my main shocks?\u003c\/h3\u003e\n\u003cp\u003eNo. Main shocks control normal suspension movement. The bump stop is there to manage the final part of compression.\u003c\/p\u003e\n\u003ch3\u003eHow do I decide when it should contact the axle?\u003c\/h3\u003e\n\u003cp\u003eCycle the suspension to establish the safe compression limit, including shock length and tire clearance. Work backward from that point so the bump stop has usable stroke before anything else reaches a hard stop.\u003c\/p\u003e\n\u003ch3\u003eDoes body size tell me which mounting sleeve to order?\u003c\/h3\u003e\n\u003cp\u003eIt is only part of the match. Check the exact bump-stop configuration, body length, mounting style, and sleeve or bracket part number.\u003c\/p\u003e\n\u003ch3\u003eIs this sold as a pair?\u003c\/h3\u003e\n\u003cp\u003eKing lists this part number as an individual component. Order the quantity required for your suspension layout.\u003c\/p\u003e\n\n\u003c\/div\u003e\u003c\/details\u003e\n\u003chr\u003e","brand":"King Shocks","offers":[{"title":"Default Title","offer_id":67562157572371,"sku":"BS2043","price":308.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/F198654391.png?v=1791235263"},{"product_id":"king-shocks-2in-weld-in-2-0-bump-stop-sleeve","title":"King Shocks 2in Weld-In 2.0 Bump Stop Sleeve","description":"\u003cp\u003eThe \u003cstrong\u003eKing 2.0 in. Bump Stop Mounting Sleeve for 2 in. Travel\u003c\/strong\u003e is the mounting component for a custom King bump-stop installation. The sleeve gives the matching bump stop a dedicated mount in your chassis. Choose this part for the correct 2.0-inch body and mounting style, then place it where the suspension can load the bump stop cleanly near full compression.\u003c\/p\u003e\n\u003cp\u003eMock up the bump stop, mount, and strike pad while cycling the suspension before committing to the final location. Leave room for tire clearance, steering, and axle articulation, and plan access for future service. The mount and the structure behind it both need to carry the force of a hard hit; this part does not turn a thin or poorly supported bracket into a finished suspension mount.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) King 2.0 in. Bump Stop Mounting Sleeve for 2 in. Travel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Bump stop sold separately. This listing is for the mounting component.\u003c\/p\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\u003csummary\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eKing Shocks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e20AB422-104\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eBump Stop Mounting Sleeve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Bump Stop Body Size\u003c\/td\u003e\n\u003ctd\u003e2.0 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Nominal Travel\u003c\/td\u003e\n\u003ctd\u003e2 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShock Body Diameter\u003c\/td\u003e\n\u003ctd\u003e2.0\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKing Configuration\u003c\/td\u003e\n\u003ctd\u003e2 IN (SLEEVE)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003eIndividual\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\u003csummary\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eCustom King bump-stop installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Body Size\u003c\/td\u003e\n\u003ctd\u003e2.0 in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eComponent\u003c\/td\u003e\n\u003ctd\u003eMounting sleeve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBump Stop Configuration\u003c\/td\u003e\n\u003ctd\u003e2 in. nominal travel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMatch the bump stop body, mounting style, and listed travel configuration before building the mount.\u003c\/li\u003e\n\u003cli\u003eA shared body diameter does not guarantee that every bump stop or sleeve in that size is interchangeable.\u003c\/li\u003e\n\u003cli\u003eMock up the contact point through full axle movement so the bump stop meets the strike pad correctly.\u003c\/li\u003e\n\u003cli\u003eUse a properly reinforced chassis attachment and retain access for removal and service.\u003c\/li\u003e\n\u003cli\u003eFor weld-in mounts, remove the bump stop before welding so welding heat cannot damage the seals or charged assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\u003csummary\u003e\u003cstrong\u003eFAQs\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\u003cdiv class=\"details-content rte\"\u003e\n\u003ch3\u003eDoes this include a hydraulic bump stop?\u003c\/h3\u003e\n\u003cp\u003eNo. This is the mounting component. Order the matching bump stop separately.\u003c\/p\u003e\n\u003ch3\u003eWill it fit any bump stop with the same body diameter?\u003c\/h3\u003e\n\u003cp\u003eDo not select it by diameter alone. The body length, mounting design, and intended bump-stop configuration also need to match.\u003c\/p\u003e\n\u003ch3\u003eWhere should the mount be placed?\u003c\/h3\u003e\n\u003cp\u003eCycle the suspension and establish full bump first. Position the bump stop and strike pad so they make controlled contact before the main shock, tire, or axle reaches an unwanted hard stop.\u003c\/p\u003e\n\u003ch3\u003eCan I weld the sleeve with the bump stop installed?\u003c\/h3\u003e\n\u003cp\u003eRemove the bump stop before welding. Finish the mount, let it cool, and inspect its fit before installing the charged component.\u003c\/p\u003e\n\u003ch3\u003eWhat should I inspect after the first trail run?\u003c\/h3\u003e\n\u003cp\u003eLook for loose hardware, movement at the mount, uneven marks on the contact pad, and signs of tire or link contact. Address those issues before harder use.\u003c\/p\u003e\n\n\u003c\/div\u003e\u003c\/details\u003e\n\u003chr\u003e","brand":"King Shocks","offers":[{"title":"Default Title","offer_id":67562160292115,"sku":"20AB422-104","price":49.4,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/F198654385.png?v=1791235292"}],"url":"https:\/\/kohparts.com\/collections\/fabrication-parts-bump-stop-cans-mounts-parts.oembed","provider":"KOHParts.com","version":"1.0","type":"link"}