{"title":"Axle Components: Knuckles \u0026 Parts: Dana 60 Knuckle Kits","description":"\u003cp\u003eDana 60 Knuckle Kits brings together Dana 60 knuckle kits for Dana 60 builders comparing compatible steering-knuckle installation packages. Kit contents can differ, so compare what is supplied with the bearings, hubs, brakes, and steering components already planned for the axle. Confirm the exact Dana 60 configuration and review the mounting requirements before choosing a package. A new housing and an existing axle conversion may need different supporting pieces. This category helps you organize a knuckle project around the complete wheel end, with attention to fitment and the installation details that connect the kit to the rest of the build.\u003c\/p\u003e","products":[{"product_id":"dana-60-front-end-kit","title":"Crane Axle Dana 60 Front End Kit for GM 6-Bolt Knuckles","description":"\u003cp\u003eThe \u003cstrong\u003eCrane Axle Dana 60 \u003cmeta charset=\"utf-8\"\u003eFront Axle Outer Assembly Kit for GM 6-Bolt Knuckles\u003c\/strong\u003e includes the major components needed to complete both outer ends of a Dana 60 front axle using GM or Chevrolet six-bolt spindle-mount knuckles. This package combines the spindles, hubs, brake components, bearings, seals, and installation hardware needed to finish a new axle build or rebuild a worn outer assembly.\u003c\/p\u003e\n\u003cp\u003eUsing a matched front-end package eliminates the need to source individual components from multiple suppliers and helps simplify spindle, hub, bearing, and brake assembly. This kit is built for custom Dana 60 axles, heavy trail rigs, rock crawlers, and other off-road applications that require a complete and serviceable GM-pattern outer assembly.\u003c\/p\u003e\n\u003ch4\u003eIncludes:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Spindles with Nuts and Washers\u003c\/li\u003e\n\u003cli\u003e(2) Brake Brackets\u003c\/li\u003e\n\u003cli\u003e(2) Wheel Hubs\u003c\/li\u003e\n\u003cli\u003e(2) Brake Rotors\u003c\/li\u003e\n\u003cli\u003e(2) Brake Calipers\u003c\/li\u003e\n\u003cli\u003e(1) Set of Brake Pads\u003c\/li\u003e\n\u003cli\u003e(2) Bearing and Seal Kits\u003c\/li\u003e\n\u003cli\u003e(16) Wheel Studs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eCrane Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eComplete Front Axle Outer Assembly Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Compatibility\u003c\/td\u003e\n\u003ctd\u003eDana 60 Front Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKnuckle Pattern\u003c\/td\u003e\n\u003ctd\u003eGM \/ Chevrolet 6-Bolt Spindle Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindles Included\u003c\/td\u003e\n\u003ctd\u003eYes, with Nuts and Washers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWheel Hubs Included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrake Components Included\u003c\/td\u003e\n\u003ctd\u003eBrackets, Rotors, Calipers, Bearings, Seals, Studs and Pads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBearings and Seals Included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWheel Studs Included\u003c\/td\u003e\n\u003ctd\u003e(16)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Position\u003c\/td\u003e\n\u003ctd\u003eFront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eComponent\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle\u003c\/td\u003e\n\u003ctd\u003eDana 60 Front Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKnuckle Type\u003c\/td\u003e\n\u003ctd\u003eGM \/ Chevrolet Pattern\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle Mounting Pattern\u003c\/td\u003e\n\u003ctd\u003e6-Bolt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eNew Axle Builds and Complete Outer-End Rebuilds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFits GM and Chevrolet Dana 60 knuckles with a six-bolt spindle mounting pattern.\u003c\/li\u003e\n\u003cli\u003eVerify the knuckle mounting pattern before ordering because Dana 60 knuckles were produced in multiple configurations.\u003c\/li\u003e\n\u003cli\u003eAxle shafts, locking hubs or drive flanges, steering arms, and knuckles are not listed as included.\u003c\/li\u003e\n\u003cli\u003eConfirm wheel bolt pattern, wheel clearance, brake hose requirements, and outer axle shaft compatibility during assembly.\u003c\/li\u003e\n\u003cli\u003eProper wheel bearing preload and brake system bleeding are required during installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ch3\u003e1. What does this Dana 60 front end kit complete?\u003c\/h3\u003e\n\u003cp\u003eThe kit supplies the spindle, hub, rotor, caliper, brake bracket, pad, bearing, seal, and wheel-stud components needed to assemble both outer ends of a compatible Dana 60 front axle.\u003c\/p\u003e\n\u003ch3\u003e2. What does the GM 6-bolt knuckle pattern refer to?\u003c\/h3\u003e\n\u003cp\u003eIt refers to the six fasteners used to secure the spindle and brake bracket assembly to the steering knuckle. The knuckle must use the correct GM or Chevrolet six-bolt mounting pattern for the components to fit.\u003c\/p\u003e\n\u003ch3\u003e3. Is this kit useful for a new custom Dana 60 build?\u003c\/h3\u003e\n\u003cp\u003eYes. It allows a builder to complete both axle ends with a coordinated group of components instead of sourcing the spindles, hubs, brakes, bearings, and hardware individually.\u003c\/p\u003e\n\u003ch3\u003e4. Why is wheel bearing preload important?\u003c\/h3\u003e\n\u003cp\u003eCorrect preload keeps the hub properly supported without excessive looseness or bearing drag. Incorrect adjustment can cause wheel movement, seal failure, brake rotor misalignment, overheating, or premature bearing wear.\u003c\/p\u003e\n\u003ch3\u003e5. What parts may still be needed to finish the axle?\u003c\/h3\u003e\n\u003cp\u003eDepending on the build, additional components may include steering knuckles, inner and outer axle shafts, U-joints, locking hubs or drive flanges, steering arms, brake hoses, and steering linkage.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e","brand":"Wide Open Design","offers":[{"title":"Default Title","offer_id":54639584575763,"sku":"WA01026","price":1799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/WA01026-Crane-Axle-GM-Dana-60-Front-Axle-Kit-1_ea62b8e3-223f-49f0-99f9-dd58e25b90a4.jpg?v=1788281431"},{"product_id":"crane-gm-dana-60-interlocking-steering-arm-knuckle-kit","title":"GM\/Dodge Dana 60 Interlocking High Steer Knuckle Kit - Crane Axle","description":"\u003cp\u003eThe \u003cstrong\u003eCrane Axle GM\/Dodge Dana 60 Interlocking Steering Arm Knuckle Kit\u003c\/strong\u003e is built for high-load steering applications where factory Dana 60 knuckles and conventional steering arm mounting systems can become a limitation. Designed for rock crawling, off-road racing, heavy trail use, and custom steering systems, this kit combines 8620 chromoly knuckles with Crane Axle's keyed interlocking high steer arm design for improved steering rigidity and long-term durability.\u003c\/p\u003e\n\u003cp\u003eThe interlocking arm system mechanically transfers steering loads into the knuckle body instead of relying solely on fastener clamping force. This helps reduce steering arm movement and hardware stress under large tires, hydraulic assist, and aggressive suspension articulation. The knuckles retain stock steering provisions while supporting crossover, Y-link, and full high-steer configurations, giving builders flexibility when laying out a Dana 60 steering system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(2) GM-Pattern Interlocking Outer Knuckles with Stock Steering Provisions\u003c\/li\u003e\n\u003cli\u003e(2) Crane Axle Kingpin Caps\u003c\/li\u003e\n\u003cli\u003e(2) Aluminum Caps\u003c\/li\u003e\n\u003cli\u003e(2) Crane Axle Interlocking High Steer Arms\u003c\/li\u003e\n\u003cli\u003eRequired Installation Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFinish Note:\u003c\/strong\u003e Knuckles ship as unfinished steel, ready for paint or coating.\u003c\/p\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eSpecifications \u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eInterlocking High Steer Knuckle Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Platform\u003c\/td\u003e\n\u003ctd\u003eGM \/ Dodge Dana 60 Kingpin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKnuckle Material\u003c\/td\u003e\n\u003ctd\u003e8620 Chromoly Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSteering Arm Design\u003c\/td\u003e\n\u003ctd\u003eKeyed Interlocking High Steer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003eSpindle Mounting Pattern\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003e6-Bolt GM\/Dodge Dana 60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStock Steering Provisions\u003c\/td\u003e\n\u003ctd\u003eRetained\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupported Steering Configurations\u003c\/td\u003e\n\u003ctd\u003eStock, Crossover, Y-Link \u0026amp; Full High Steer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eUnfinished Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturing\u003c\/td\u003e\n\u003ctd\u003ePrecision Machined\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eMade in the USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended Use\u003c\/td\u003e\n\u003ctd\u003eRock Crawling, Racing, Trail \u0026amp; Heavy-Duty Off-Road Steering\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFitment \u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003cth\u003eAxle Application\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eK30 \/ V30 1-Ton 4x4\u003c\/td\u003e\n\u003ctd\u003e1977–1991\u003c\/td\u003e\n\u003ctd\u003eDana 60 Front Kingpin Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eK30 \/ V30 1-Ton 4x4\u003c\/td\u003e\n\u003ctd\u003e1977–1991\u003c\/td\u003e\n\u003ctd\u003eDana 60 Front Kingpin Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eW-300 \/ W-350 \/ 3500\u003c\/td\u003e\n\u003ctd\u003e1975–1993\u003c\/td\u003e\n\u003ctd\u003eDana 60 Front Kingpin Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCustom\u003c\/td\u003e\n\u003ctd\u003eDana 60 Kingpin Fabrication Applications\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003eDana 60 Front Kingpin Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits compatible six-bolt GM and Dodge Dana 60 kingpin knuckle applications.\u003c\/li\u003e\n\u003cli\u003eDesigned for kingpin Dana 60 front axles only.\u003c\/li\u003e\n\u003cli\u003eSupports stock steering, crossover steering, Y-link, and full high-steer configurations.\u003c\/li\u003e\n\u003cli\u003eVerify axle type, kingpin configuration, knuckle pattern, steering arm layout, and wheel clearance before ordering.\u003c\/li\u003e\n\u003cli\u003eCustom steering systems may require additional tie rods, drag links, rod ends, hydraulic assist components, or fabrication.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFAQ \u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ch3\u003eWhat is the advantage of Crane Axle's interlocking high steer design?\u003c\/h3\u003e\n\u003cp\u003eThe keyed steering arms mechanically engage the knuckles so steering loads are transferred into the knuckle body instead of relying only on mounting bolt clamping force. This helps reduce arm movement and hardware stress under high steering loads.\u003c\/p\u003e\n\u003ch3\u003eWhat steering configurations can this Dana 60 knuckle kit support?\u003c\/h3\u003e\n\u003cp\u003eThe knuckles retain stock steering provisions while also supporting crossover, Y-link, and full high-steer layouts. The final configuration depends on the steering linkage, suspension geometry, and intended use of the vehicle.\u003c\/p\u003e\n\u003ch3\u003eWill this kit fit both GM and Dodge Dana 60 kingpin axles?\u003c\/h3\u003e\n\u003cp\u003eIt is designed for compatible six-bolt GM and Dodge Dana 60 kingpin applications. Because Dana 60 components vary by axle generation and build, confirm the actual knuckle pattern and kingpin configuration before ordering.\u003c\/p\u003e\n\u003ch3\u003eWhy use 8620 chromoly knuckles instead of factory cast knuckles?\u003c\/h3\u003e\n\u003cp\u003eLarge tires, hydraulic steering, and aggressive off-road driving can place substantial impact and steering loads on the knuckle. Crane Axle uses 8620 chromoly steel to provide increased strength and durability for severe-duty steering applications.\u003c\/p\u003e\n\u003ch3\u003eDo these knuckles come finished or coated?\u003c\/h3\u003e\n\u003cp\u003eNo. The knuckles ship as unfinished steel so the builder can paint or coat them to match the axle and vehicle after final fabrication and mock-up.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e","brand":"Crane Axle","offers":[{"title":"Default Title","offer_id":54640074195219,"sku":"CA01014","price":1349.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/CA01014CraneGMDana60SteeringArmInterlockingKnuckleKit-69.png?v=1789863288"},{"product_id":"crane-axle-gm-dana-60-crossover-knuckle-kit","title":"GM Dana 60 Crossover Knuckle Kit - Crane Axle","description":"\u003cp\u003eThe \u003cstrong\u003eCrane Axle GM Dana 60 Crossover Knuckle Kit\u003c\/strong\u003e is designed for builders upgrading GM kingpin Dana 60 front axles to a crossover steering configuration for improved steering geometry, linkage clearance, and steering stability. The system combines Crane Axle 8620 chromoly outer knuckles with an interlocking high steer arm while retaining factory-style steering provisions for flexibility in custom off-road steering layouts.\u003c\/p\u003e\n\u003cp\u003eThe keyed interlocking steering arm design mechanically transfers steering loads into the knuckle body instead of relying solely on mounting hardware clamping force. This helps reduce stress on steering arm fasteners and improves rigidity under large tires, hydraulic assist steering, and repeated off-road impacts common in rock crawling, trail rigs, and heavy-duty 4x4 applications.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(2) GM Interlocking Outer Knuckles with Stock Steering Provisions\u003c\/li\u003e\n\u003cli\u003e(1) Crane Axle Interlocking High Steer Arm\u003c\/li\u003e\n\u003cli\u003e(2) Crane Axle Kingpin Caps\u003c\/li\u003e\n\u003cli\u003e(1) Crane Axle Kingpin Spacer\u003c\/li\u003e\n\u003cli\u003eRequired Installation Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFinish Note:\u003c\/strong\u003e Ships as unfinished steel, ready for paint or coating.\u003c\/p\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eSpecifications \u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eCrossover Steering Knuckle Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Platform\u003c\/td\u003e\n\u003ctd\u003eGM Dana 60 Kingpin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKnuckle Material\u003c\/td\u003e\n\u003ctd\u003e8620 Chromoly Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSteering Arm Design\u003c\/td\u003e\n\u003ctd\u003eKeyed Interlocking High Steer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSteering Configuration\u003c\/td\u003e\n\u003ctd\u003eCrossover Steering\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStock Steering Provisions\u003c\/td\u003e\n\u003ctd\u003eRetained\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003eSpindle Mounting Pattern\u003c\/td\u003e\n\u003ctd\u003eSix-Bolt GM Dana 60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eUnfinished Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturing\u003c\/td\u003e\n\u003ctd\u003ePrecision Cast \u0026amp; Machined in the USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended Use\u003c\/td\u003e\n\u003ctd\u003eRock Crawling, Trail \u0026amp; Heavy-Duty Off-Road Steering\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFitment \u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003cth\u003eAxle Application\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eK30 \/ V30 4x4\u003c\/td\u003e\n\u003ctd\u003e1973–1991\u003c\/td\u003e\n\u003ctd\u003eDana 60 Front Kingpin Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eFull Size 4x4 Trucks\u003c\/td\u003e\n\u003ctd\u003e1973–1998\u003c\/td\u003e\n\u003ctd\u003eDana 60 Front Kingpin Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eCustom Dana 60 Swaps\u003c\/td\u003e\n\u003ctd\u003e1973–1991\u003c\/td\u003e\n\u003ctd\u003eDana 60 Front Kingpin Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCustom\u003c\/td\u003e\n\u003ctd\u003eSix-Bolt GM Dana 60 Applications\u003c\/td\u003e\n\u003ctd\u003e—\u003c\/td\u003e\n\u003ctd\u003eDana 60 Front Kingpin Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for six-bolt GM Dana 60 kingpin knuckle applications.\u003c\/li\u003e\n\u003cli\u003eRequires a kingpin-style Dana 60 front axle configuration.\u003c\/li\u003e\n\u003cli\u003eSupports crossover steering configurations while retaining stock steering provisions.\u003c\/li\u003e\n\u003cli\u003eCommonly used on lifted and custom off-road steering systems.\u003c\/li\u003e\n\u003cli\u003eVerify knuckle pattern, steering arm configuration, tie rod location, drag link geometry, and wheel clearance before ordering.\u003c\/li\u003e\n\u003cli\u003eCustom steering systems may require additional linkage, rod ends, steering arms, or fabrication depending on the vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFAQ \u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ch3\u003eWhat is crossover steering on a Dana 60?\u003c\/h3\u003e\n\u003cp\u003eCrossover steering routes the drag link across the axle to the opposite steering knuckle. On lifted and custom off-road vehicles, this configuration can improve steering geometry and provide additional linkage clearance compared with some factory steering layouts.\u003c\/p\u003e\n\u003ch3\u003eWhat is the advantage of Crane Axle's interlocking high steer arm?\u003c\/h3\u003e\n\u003cp\u003eThe keyed steering arm mechanically engages the knuckle so steering loads are transferred into the knuckle body instead of relying only on the clamping force of the mounting hardware. This helps improve rigidity and reduce fastener stress under high steering loads.\u003c\/p\u003e\n\u003ch3\u003eDoes this kit retain the factory steering provisions?\u003c\/h3\u003e\n\u003cp\u003eYes. The included GM-style outer knuckles retain stock steering provisions while adding the Crane Axle interlocking high steer system, giving builders more flexibility when designing the steering linkage.\u003c\/p\u003e\n\u003ch3\u003eWill this kit fit every Dana 60 front axle?\u003c\/h3\u003e\n\u003cp\u003eNo. This kit is designed around six-bolt GM Dana 60 kingpin knuckle applications. Verify that your axle uses the correct kingpin configuration and knuckle pattern before ordering.\u003c\/p\u003e\n\u003ch3\u003eWhy use 8620 chromoly knuckles on an off-road Dana 60?\u003c\/h3\u003e\n\u003cp\u003eLarge tires, hydraulic assist, and aggressive terrain place substantial loads on steering knuckles. The Crane Axle knuckles are manufactured from 8620 chromoly steel to provide the strength and durability needed for severe-duty off-road steering applications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e","brand":"Crane Axle","offers":[{"title":"Default Title","offer_id":54640074260755,"sku":"CA01014B","price":1299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/CA01014B-Crane-GM-Dana-60-Crossover-Knuckle-Kit--1.jpg?v=1788282069"},{"product_id":"crane-axle-gm-dana-60-front-steer-knuckle-kit","title":"Crane Axle GM Dana 60 Front Steer Knuckle Kit","description":"\u003cp\u003eThe \u003cstrong\u003eCrane Axle GM Dana 60 Front Steer Knuckle Kit\u003c\/strong\u003e gives builders the major steering components needed to complete a heavy-duty front axle for rock crawlers, Ultra4 cars, rock bouncers, and custom tube chassis vehicles. Manufactured by \u003cstrong\u003eCrane Axle\u003c\/strong\u003e, this package combines Dana 60 kingpin geometry with chromoly inner C’s, interlocking outer knuckles, keyed high-steer arms, and the required kingpin components.\u003c\/p\u003e\n\n\u003cp\u003eThe keyed interlocking steering arm system transfers steering force directly into the knuckle body instead of relying entirely on fastener clamping force. This creates a more rigid and serviceable steering platform for large tires, hydraulic steering systems, repeated suspension articulation, and severe off-road impacts.\u003c\/p\u003e\n\n\u003ch4\u003eIncludes:\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e(2) Crane Axle Dana 60 Inner C’s – 3.00\" Standard Bore\u003c\/li\u003e\n  \u003cli\u003eOptional 3.50\" Inner C Bore Available by Request\u003c\/li\u003e\n  \u003cli\u003e(2) Crane Axle GM Dana 60 Outer Knuckles\u003c\/li\u003e\n  \u003cli\u003e(2) Dana 60 Interlocking High-Steer Arms\u003c\/li\u003e\n  \u003cli\u003e(1) Dana 60 Kingpin Component Kit\u003c\/li\u003e\n  \u003cli\u003eRequired Assembly Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n  \u003csummary class=\"details__header\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\n  \u003cdiv class=\"details-content rte\"\u003e\n    \u003ctable class=\"custom-specs-table\"\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003cth\u003eSpecification\u003c\/th\u003e\n          \u003cth\u003eDetails\u003c\/th\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eManufacturer\u003c\/td\u003e\n          \u003ctd\u003eCrane Axle\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eProduct Type\u003c\/td\u003e\n          \u003ctd\u003eFront Steer Knuckle Builder Kit\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eAxle Platform\u003c\/td\u003e\n          \u003ctd\u003eGM Dana 60\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eSteering Configuration\u003c\/td\u003e\n          \u003ctd\u003eFront Steer\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eSteering Geometry\u003c\/td\u003e\n          \u003ctd\u003eDana 60 Kingpin\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eKnuckle Material\u003c\/td\u003e\n          \u003ctd\u003e8620 Chromoly Steel\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eInner C Material\u003c\/td\u003e\n          \u003ctd\u003e8620 Chromoly Steel\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eHigh-Steer Arm Design\u003c\/td\u003e\n          \u003ctd\u003eKeyed Interlocking\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eStandard Inner C Bore\u003c\/td\u003e\n          \u003ctd\u003e3.00\"\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eOptional Inner C Bore\u003c\/td\u003e\n          \u003ctd\u003e3.50\" Available by Request\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eAxle Tube Compatibility\u003c\/td\u003e\n          \u003ctd\u003eCustom Applications Using 3.125\"–3.50\" OD Axle Tubes\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eService Components\u003c\/td\u003e\n          \u003ctd\u003eGM Dana 60 Kingpin Style\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eInstallation\u003c\/td\u003e\n          \u003ctd\u003eCustom Fabrication and Welding Required\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eCountry of Origin\u003c\/td\u003e\n          \u003ctd\u003eCast and Machined in the USA\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n  \u003csummary class=\"details__header\"\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\n  \u003cdiv class=\"details-content rte\"\u003e\n    \u003ctable class=\"custom-specs-table\"\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003cth\u003eApplication\u003c\/th\u003e\n          \u003cth\u003eCompatibility\u003c\/th\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eAxle Type\u003c\/td\u003e\n          \u003ctd\u003eGM Dana 60 Front Steering Axle\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eAxle Housing\u003c\/td\u003e\n          \u003ctd\u003eOEM-Based or Fabricated Dana 60 Housing\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eSteering System\u003c\/td\u003e\n          \u003ctd\u003eKingpin High-Steer Configuration\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eVehicle Application\u003c\/td\u003e\n          \u003ctd\u003eUniversal Custom Off-Road Fabrication\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eCommon Builds\u003c\/td\u003e\n          \u003ctd\u003eRock Crawlers, Ultra4 Cars, Rock Bouncers, and Tube Chassis Vehicles\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n\n    \u003ch3\u003eFitment Notes\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eDesigned for GM Dana 60 front steering axle applications.\u003c\/li\u003e\n      \u003cli\u003eUses Dana 60 kingpin steering geometry and compatible service components.\u003c\/li\u003e\n      \u003cli\u003eStandard inner C bore is 3.00\".\u003c\/li\u003e\n      \u003cli\u003eAn optional 3.50\" inner C bore is available by request.\u003c\/li\u003e\n      \u003cli\u003eSupplied axle tube compatibility is listed as 3.125\" to 3.50\" OD; verify the required inner C bore and axle tube dimensions before ordering.\u003c\/li\u003e\n      \u003cli\u003eCompatible with custom fabricated and OEM-based axle housings when properly machined and assembled.\u003c\/li\u003e\n      \u003cli\u003eProfessional axle alignment, caster setup, machining, and welding are required.\u003c\/li\u003e\n      \u003cli\u003eAxle housing, shafts, U-joints, spindles, hubs, brakes, steering cylinder, and wheel-end components are not listed as included.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n  \u003csummary class=\"details__header\"\u003e\u003cstrong\u003eTech Insight\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\n  \u003cdiv class=\"details-content rte\"\u003e\n    \u003ch3\u003eWhat makes the interlocking high-steer system different?\u003c\/h3\u003e\n    \u003cp\u003eThe keyed engagement surfaces mechanically connect the high-steer arm to the knuckle body. This allows steering load to be transferred through the interlocking surfaces rather than relying only on the clamping force of the mounting bolts.\u003c\/p\u003e\n\n    \u003ch3\u003eWhy use 8620 chromoly knuckles and inner C’s?\u003c\/h3\u003e\n    \u003cp\u003e8620 chromoly provides a strong combination of impact resistance, toughness, and fatigue strength. These properties are especially important in front axle components exposed to large tires, hydraulic steering pressure, suspension articulation, and repeated trail impacts.\u003c\/p\u003e\n\n    \u003ch3\u003eIs this kit designed for hydraulic steering?\u003c\/h3\u003e\n    \u003cp\u003eYes. The kit is well suited to hydraulic assist and full-hydraulic steering applications when the steering arms, cylinder, mounts, orbital valve, and remaining system components are properly matched.\u003c\/p\u003e\n\n    \u003ch3\u003eCan the kit be used with a fabricated axle housing?\u003c\/h3\u003e\n    \u003cp\u003eYes. This package is commonly used on custom fabricated Dana 60 housings and other builder applications using compatible tube diameters and Dana 60 kingpin geometry.\u003c\/p\u003e\n\n    \u003ch3\u003eDoes this kit include everything needed for a complete axle?\u003c\/h3\u003e\n    \u003cp\u003eNo. This is a knuckle builder kit containing the primary inner C, outer knuckle, high-steer, kingpin, and hardware components. Axle tubes, shafts, U-joints, wheel hubs, spindles, brakes, steering components, and the center housing must be selected separately.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e","brand":"Crane Axle","offers":[{"title":"Default Title","offer_id":54640074752275,"sku":"CA01024F","price":2199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/CA01024F-Crane-Steering-Axle-Builder-Kit-1.jpg?v=1788282080"},{"product_id":"crane-axle-ford-dana-60-interlocking-knuckle-kit","title":"Crane Axle Ford Dana 60 Kingpin Interlocking Knuckle Kit","description":"\u003cp\u003eThe Crane Axle Ford Dana 60 Kingpin Knuckle Kit is engineered to strengthen and stabilize the steering system on Ford Kingpin Dana 60 front axles used in hardcore rock crawlers, Ultra4 cars, and heavy off-road trail rigs. Designed around factory Ford Dana 60 kingpin geometry, this system combines Crane’s interlocking keyed high steer arm design with massive 8620 chromoly outer knuckles to create a steering platform capable of handling large tires, hydraulic assist steering, and repeated high-load impacts without relying solely on steering arm studs and bolt clamping force.\u003c\/p\u003e\n\u003cp\u003eUnlike traditional cast steering knuckles where steering loads are concentrated directly into the mounting hardware, Crane's interlocking system transfers steering forces through keyed engagement surfaces built into the knuckle itself. This dramatically reduces fastener stress while improving steering precision, rigidity, and long-term durability in abusive off-road environments. All major components are cast and machined in the USA from weldable 8620 chromoly steel for superior strength, fatigue resistance, and trail serviceability.\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eIncludes:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Crane Ford Kingpin Dana 60 Interlocking Outer Knuckles\u003c\/li\u003e\n\u003cli\u003e(2) Crane Interlocking High Steer Arms\u003c\/li\u003e\n\u003cli\u003e(2) Crane Kingpin Caps\u003c\/li\u003e\n\u003cli\u003eComplete Installation Hardware Kit (9\/16\" Grade Hardware)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShips as Unfinished Steel\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eSpecifications \u003c\/strong\u003e \u003cspan class=\"svg-wrapper icon-plus\"\u003e \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n        \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n      \u003c\/svg\u003e \u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Compatibility\u003c\/td\u003e\n\u003ctd\u003eFord Dana 60 Kingpin Front Axles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e8620 Chromoly Steel (Cast \u0026amp; Machined)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSteering Arm Interface\u003c\/td\u003e\n\u003ctd\u003ePrecision Keyed Interlocking System\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle Pattern\u003c\/td\u003e\n\u003ctd\u003eFactory Ford 5-Bolt Spindle Pattern\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardware Size\u003c\/td\u003e\n\u003ctd\u003e9\/16\" Steering Arm and Kingpin Hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSteering Compatibility\u003c\/td\u003e\n\u003ctd\u003eCrossover, High Steer, and Hydraulic Systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eUnfinished Bare Steel (Requires Paint or Coating)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eManufactured in the USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFitment \u003c\/strong\u003e \u003cspan class=\"svg-wrapper icon-plus\"\u003e \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n        \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n      \u003c\/svg\u003e \u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003cth\u003eAxle Application\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-250 (4x4 w\/ Dana 60 Option)\u003c\/td\u003e\n\u003ctd\u003e1978–1997\u003c\/td\u003e\n\u003ctd\u003eDana 60 Front Kingpin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-350 (4x4 Monobeam)\u003c\/td\u003e\n\u003ctd\u003e1978–1997\u003c\/td\u003e\n\u003ctd\u003eDana 60 Front Kingpin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eCustom Fabrication \/ Fabbed Housings\u003c\/td\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eFord Dana 60 Front Kingpin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cb\u003eFitment Notes:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits factory Ford Dana 60 kingpin front axle applications (1978–1979 F-250\/F-350 and 1985–1997 F-350 monobeam axles) as well as aftermarket Crane Axle kingpin inner C's.\u003c\/li\u003e\n\u003cli\u003eRetains the factory Ford 5-bolt spindle pattern and brake caliper mounting dimensions; not compatible with GM\/Dodge 6-bolt spindle components.\u003c\/li\u003e\n\u003cli\u003eDesigned for crossover steering, high steer, or hydraulic ram setups on custom off-road and fabricated axle builds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eTech Insight \u003c\/strong\u003e \u003cspan class=\"svg-wrapper icon-plus\"\u003e \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n        \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n      \u003c\/svg\u003e \u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003cp\u003eTraditional steering arm systems place the majority of steering load directly on the mounting studs and fasteners. In extreme off-road applications running large tires and hydraulic assist steering, this can lead to fastener movement, steering slop, or hardware failure over time.\u003c\/p\u003e\n\u003cp\u003eThe Crane Axle interlocking system uses a precision-machined keyed interface between the steering arm and knuckle to transfer steering force into the knuckle body itself rather than relying entirely on bolt clamping force. Combined with 8620 chromoly construction, this creates a more stable steering assembly capable of handling high shock loads and repeated off-road abuse while maintaining tighter steering geometry.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFrequently Asked Questions (FAQ) \u003c\/strong\u003e \u003cspan class=\"svg-wrapper icon-plus\"\u003e \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n        \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n      \u003c\/svg\u003e \u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003cp\u003e\u003cstrong\u003e1. What is the difference between Ford and GM\/Dodge Dana 60 kingpin knuckles?\u003c\/strong\u003e\u003cbr\u003eFord Dana 60 kingpin knuckles use a 5-bolt spindle pattern and different brake caliper mounting dimensions, whereas GM\/Dodge Dana 60 knuckles use a 6-bolt spindle pattern. You must use Ford-pattern spindles and brakes with these knuckles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2. Why is 8620 chromoly steel better than factory cast iron for rock crawling?\u003c\/strong\u003e\u003cbr\u003eFactory cast iron knuckles are brittle and prone to cracking or snapping around the steering arm surface under severe shock loads and hydraulic steering pressure. 8620 chromoly steel provides superior tensile strength, impact toughness, and fatigue resistance, making it virtually unbreakable on the trail.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3. Can I use standard aftermarket high steer arms with these Crane knuckles?\u003c\/strong\u003e\u003cbr\u003eNo. Because these knuckles feature a precision-machined keyed interlocking top surface, you must use the included Crane Interlocking High Steer Arms to ensure proper mating and load transfer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4. Are these knuckles compatible with factory Ford kingpin rebuild kits?\u003c\/strong\u003e\u003cbr\u003eYes. These knuckles are machined to factory Ford Dana 60 kingpin inclination and camber angles, allowing you to use standard kingpin rebuild kits, bushings, bearings, seals, and kingpin caps.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5. Can I weld brackets or double-shear steering tabs directly to 8620 chromoly?\u003c\/strong\u003e\u003cbr\u003eYes. Unlike cast iron, 8620 chromoly steel is readily weldable using standard MIG or TIG welding procedures with proper pre-heating and post-heating techniques, allowing fabricators to add custom double-shear tabs or steering stops if needed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e","brand":"Crane Axle","offers":[{"title":"Default Title","offer_id":54640074817811,"sku":"CA01012","price":1099.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/CA01012-Crane-Ford-D60-Interlocking-Knuckle-Kit-1_0236d079-8858-487e-933e-8940c6612b58.jpg?v=1788282082"},{"product_id":"crane-axle-gm-dana-60-rear-steer-knuckle-kit","title":"Crane Axle GM Dana 60 Rear Steer Knuckle Kit","description":"\u003cp\u003eThe \u003cstrong\u003eCrane Axle GM Dana 60 Rear Steer Knuckle Kit\u003c\/strong\u003e is designed around proven Dana 60 kingpin steering geometry for custom rear steering axle assemblies. The kit combines 8620 chromoly knuckles, interlocking high steer arms, inner C's, kingpin components, and required hardware into a heavy-duty foundation for rear steer systems used in rock crawlers, competition buggies, and high-articulation off-road vehicles.\u003c\/p\u003e\n\u003cp\u003eUnlike a Dana 60-specific replacement system, this kit can be adapted to a wide range of axle platforms and fabricated housings. It is compatible with GM 14-Bolt, Dana 60, Dana 70, Dana 80, fabricated 9\" and 10\" housings, and other custom axle assemblies using the appropriate housing bore. The keyed, interlocking high steer arm design mechanically transfers steering loads into the knuckle instead of relying solely on fastener clamping force, helping reduce stress on steering arm hardware under high-load steering conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Dana 60 Inner C's – 3.00\" I.D. Standard Bore\u003c\/li\u003e\n\u003cli\u003e(2) Crane Axle GM Dana 60 Kingpin Knuckles\u003c\/li\u003e\n\u003cli\u003e(2) Crane Axle Dana 60 High Steer Arms\u003c\/li\u003e\n\u003cli\u003e(1) Dana 60 Kingpin Component Kit\u003c\/li\u003e\n\u003cli\u003eRequired Installation Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Optional 3.50\" I.D. inner C's are available by request.\u003c\/p\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eSpecifications \u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eRear Steer Kingpin Knuckle Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKnuckle Platform\u003c\/td\u003e\n\u003ctd\u003eGM Dana 60 Kingpin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eRear Steering \/ Custom Steering Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKnuckle Material\u003c\/td\u003e\n\u003ctd\u003e8620 Chromoly Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSteering Arm Design\u003c\/td\u003e\n\u003ctd\u003eKeyed Interlocking High Steer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSteering Geometry\u003c\/td\u003e\n\u003ctd\u003eDana 60 Kingpin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandard Inner C Bore\u003c\/td\u003e\n\u003ctd\u003e3.00\" I.D.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOptional Inner C Bore\u003c\/td\u003e\n\u003ctd\u003e3.50\" I.D. – Available by Request\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Housing Range\u003c\/td\u003e\n\u003ctd\u003e3.00\"–4.00\" Bore Configurations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eService Components\u003c\/td\u003e\n\u003ctd\u003eCompatible with GM Dana 60 Kingpin Components\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturing\u003c\/td\u003e\n\u003ctd\u003eManufactured \u0026amp; Machined in the USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFitment \u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003cp\u003eThis is a universal fabrication component for custom rear steer axle assemblies. Year, make, and model fitment does not apply.\u003c\/p\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eAxle Platform\u003c\/th\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eGM 14-Bolt\u003c\/td\u003e\n\u003ctd\u003eCustom Rear Steer Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDana 60\u003c\/td\u003e\n\u003ctd\u003eCustom Rear Steer Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDana 70\u003c\/td\u003e\n\u003ctd\u003eCustom Rear Steer Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDana 80\u003c\/td\u003e\n\u003ctd\u003eCustom Rear Steer Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFabricated 9\" Housing\u003c\/td\u003e\n\u003ctd\u003eCustom Rear Steer Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFabricated 10\" Housing\u003c\/td\u003e\n\u003ctd\u003eCustom Rear Steer Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCustom Fabricated Housing\u003c\/td\u003e\n\u003ctd\u003eRear Steer Applications with Compatible Housing Dimensions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for rear steer and custom steering axle applications.\u003c\/li\u003e\n\u003cli\u003eCompatible with axle housings using appropriate 3.00\"–4.00\" bore configurations.\u003c\/li\u003e\n\u003cli\u003eStandard kit includes 3.00\" I.D. inner C's.\u003c\/li\u003e\n\u003cli\u003eOptional 3.50\" I.D. inner C's are available by request.\u003c\/li\u003e\n\u003cli\u003eCompatible with fabricated axle housings.\u003c\/li\u003e\n\u003cli\u003eUses GM Dana 60 kingpin steering geometry and service components.\u003c\/li\u003e\n\u003cli\u003eFinal fitment depends on housing dimensions, axle shaft configuration, wheel ends, steering cylinder placement, and overall axle design.\u003c\/li\u003e\n\u003cli\u003eProfessional axle fabrication and welding are required for installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFAQ \u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ch3\u003eWhat axle housings can this rear steer knuckle kit be used with?\u003c\/h3\u003e\n\u003cp\u003eThe kit can be incorporated into GM 14-Bolt, Dana 60, Dana 70, Dana 80, fabricated 9\" and 10\", and other custom axle housings with compatible housing dimensions. This allows builders to use Dana 60 kingpin steering geometry without being limited to a Dana 60 center section.\u003c\/p\u003e\n\u003ch3\u003eWhat is the advantage of the interlocking high steer arm design?\u003c\/h3\u003e\n\u003cp\u003eThe Crane Axle high steer arm uses precision-machined keyed engagement surfaces that mechanically interlock the steering arm with the knuckle. This helps transfer steering loads directly into the knuckle instead of relying solely on the clamping force of the mounting hardware.\u003c\/p\u003e\n\u003ch3\u003eWhy use 8620 chromoly for a rear steer knuckle?\u003c\/h3\u003e\n\u003cp\u003eRear steer systems used with large tires and aggressive off-road vehicles can place substantial impact and steering loads on the knuckles. The Crane Axle knuckles are cast and machined from 8620 chromoly steel for the strength and durability required in severe-duty steering applications.\u003c\/p\u003e\n\u003ch3\u003eCan I use common Dana 60 kingpin replacement components?\u003c\/h3\u003e\n\u003cp\u003eYes. The system uses GM Dana 60 kingpin-style service components, helping make replacement parts easier to source and simplifying maintenance and trailside repairs.\u003c\/p\u003e\n\u003ch3\u003eWhat inner C bore is included with the kit?\u003c\/h3\u003e\n\u003cp\u003eThe standard kit includes 3.00\" I.D. inner C's. Optional 3.50\" I.D. inner C's are available by request for builders working with different axle housing dimensions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e","brand":"Crane Axle","offers":[{"title":"Default Title","offer_id":54640074850579,"sku":"CA01024","price":2199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/CA01024-Crane-Rear-Steering-Axle-Builder-Kit-1.jpg?v=1788282083"},{"product_id":"crane-axle-gm-dodge-dana-60-interlocking-knuckle-kit","title":"Crane Axle GM\/Dodge Dana 60 Interlocking Knuckle Kit","description":"\u003cp\u003eThe Crane Axle GM\/Dodge Dana 60 Interlocking Knuckle Kit is engineered for kingpin Dana 60 front axles in rock crawlers, Ultra4 cars, competition buggies, and heavy-duty trail rigs. Cast and machined in the USA from 8620 chromoly steel, this kit combines high-strength outer knuckles with Crane’s keyed interlocking high steer arm system to dramatically increase steering rigidity and long-term durability under extreme off-road use.\u003c\/p\u003e\n\u003cp\u003eUnlike traditional steering arm setups that rely entirely on fastener clamping force, Crane's interlocking system mechanically transfers steering loads directly into the knuckle body through precision-machined keyed engagement surfaces. This design eliminates steering arm movement and fastener shear, providing zero-slop steering response even under severe shock loads, large tire diameters, and full hydraulic steering systems.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eIncludes:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Crane GM\/Dodge Kingpin Dana 60 Interlocking Outer Knuckles\u003c\/li\u003e\n\u003cli\u003e(2) Crane Interlocking High Steer Arms\u003c\/li\u003e\n\u003cli\u003e(2) Crane Kingpin Caps\u003c\/li\u003e\n\u003cli\u003eAll Necessary Mounting Hardware\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eShips as Unfinished Steel\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eSpecifications \u003c\/strong\u003e \u003cspan class=\"svg-wrapper icon-plus\"\u003e \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n        \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n      \u003c\/svg\u003e \u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Compatibility\u003c\/td\u003e\n\u003ctd\u003eGM and Dodge Dana 60 Kingpin Front Axles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e8620 Chromoly Steel (Cast \u0026amp; Machined)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSteering Arm Interface\u003c\/td\u003e\n\u003ctd\u003ePrecision Keyed Interlocking System\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardware Size\u003c\/td\u003e\n\u003ctd\u003e9\/16\" Steering Arm and Kingpin Hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSteering Compatibility\u003c\/td\u003e\n\u003ctd\u003eCrossover, High Steer, and Full Hydraulic Systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eUnfinished Bare Steel (Requires Paint or Coating)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eManufactured in the USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFitment \u003c\/strong\u003e \u003cspan class=\"svg-wrapper icon-plus\"\u003e \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n        \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n      \u003c\/svg\u003e \u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003cth\u003eAxle Application\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet \/ GMC\u003c\/td\u003e\n\u003ctd\u003e1 Ton (K30 \/ V30 \/ K3500)\u003c\/td\u003e\n\u003ctd\u003e1977–1991\u003c\/td\u003e\n\u003ctd\u003eDana 60 Front Kingpin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eD700 \/ W300 \/ W350\u003c\/td\u003e\n\u003ctd\u003e1975–1993\u003c\/td\u003e\n\u003ctd\u003eDana 60 Front Kingpin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eCustom Fabrication Applications\u003c\/td\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eDana 60 Front Kingpin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cb\u003eFitment Notes:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits factory GM and Dodge kingpin Dana 60 inner C's as well as aftermarket Crane Axle kingpin inner C's.\u003c\/li\u003e\n\u003cli\u003eNot compatible with Ford Dana 60 kingpin knuckles due to differing brake and spindle bolt patterns.\u003c\/li\u003e\n\u003cli\u003eDesigned for crossover steering, high steer, or full hydraulic ram setups on custom off-road and fabricated axle builds.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eTech Insight \u003c\/strong\u003e \u003cspan class=\"svg-wrapper icon-plus\"\u003e \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n        \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n      \u003c\/svg\u003e \u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003cp\u003eLarge tires, hydraulic steering systems, and aggressive off-road use place extreme stress on traditional steering arm mounting systems. Standard Dana 60 steering arms rely heavily on fastener clamping force, which can allow movement, fastener fatigue, or steering slop under repeated shock loading.\u003c\/p\u003e\n\u003cp\u003eThe Crane interlocking system uses precision-machined keyed engagement surfaces between the steering arm and knuckle body to transfer steering loads mechanically instead of depending solely on bolt strength. Combined with 8620 chromoly construction, this creates a more rigid steering assembly capable of handling the severe impact loads and steering forces commonly seen in rock bouncing and Ultra4 competition environments.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFrequently Asked Questions (FAQ) \u003c\/strong\u003e \u003cspan class=\"svg-wrapper icon-plus\"\u003e \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n        \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n      \u003c\/svg\u003e \u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003cp\u003e\u003cstrong\u003e1. Will these knuckles fit a Ford Dana 60 kingpin axle?\u003c\/strong\u003e\u003cbr\u003eNo. GM\/Dodge Dana 60 kingpin knuckles use a 6-bolt spindle pattern and different brake caliper mounting dimensions compared to Ford Dana 60 axles, which use a 5-bolt spindle pattern. Ensure you have a GM or Dodge inner C and spindle setup before ordering.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2. What is the benefit of 8620 chromoly steel over factory cast iron knuckles?\u003c\/strong\u003e\u003cbr\u003eFactory cast iron knuckles are brittle and prone to cracking or breaking under impact loads from large tires and hydraulic steering. 8620 chromoly steel offers significantly higher tensile strength and impact resistance, making it nearly impossible to break on the trail.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e3. Can I use my factory steering arms or standard aftermarket arms with these knuckles?\u003c\/strong\u003e\u003cbr\u003eNo. Because of the precision-machined keyed interlocking top surface on the knuckles, you must use the included Crane Interlocking High Steer Arms to ensure proper mating and load transfer.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4. Do these knuckles retain factory camber and kingpin inclination angles?\u003c\/strong\u003e\u003cbr\u003eYes. The knuckles are machined to factory GM\/Dodge kingpin inclination angles, allowing you to use standard kingpin rebuild kits, bushings, bearings, and seals.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e5. What surface prep is required before painting or coating?\u003c\/strong\u003e\u003cbr\u003eBecause these components ship as bare unfinished steel, wipe them down thoroughly with a degreaser or solvent (like acetone or brake cleaner) to remove protective machining oils before applying primer, paint, or powder coat.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e","brand":"Crane Axle","offers":[{"title":"Default Title","offer_id":54640074981651,"sku":"CA01013","price":1099.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/CA01013-Crane-GM-Interlocking-Knuckle-Kit-1_ec50ced5-c2e4-4b69-aaea-0131502c3f22.jpg?v=1788282084"},{"product_id":"crane-axle-dana-60-chromoly-inner-c","title":"Crane Axle Dana 60 Kingpin \u0026 GM 14-Bolt Chromoly Inner C (Single)","description":"\u003cp\u003eThe \u003cstrong\u003eCrane Axle Dana 60 Kingpin Chromoly Inner C\u003c\/strong\u003e is cast and machined from 8620 chromoly steel to provide a stronger, lighter alternative to traditional cast-iron inner knuckles. Manufactured by \u003cstrong\u003eCrane Axle\u003c\/strong\u003e, it is designed to work with factory and aftermarket Dana 60 kingpin outer knuckles in custom Dana 60 and GM 14-Bolt front steering axle applications.\u003c\/p\u003e\n\u003cp\u003eAdditional material is incorporated into high-stress areas while unnecessary weight is removed from lower-load sections. The weld-on design is compatible with MIG and TIG welding processes and is well suited for fabricated axle housings used in rock crawlers, rock bouncers, Ultra4 cars, mud trucks, and other extreme-duty off-road builds.\u003c\/p\u003e\n\u003ch4\u003eIncludes:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Crane Axle Dana 60 Kingpin Inner C\u003c\/li\u003e\n\u003cli\u003eStandard 3.00\" I.D. Bore\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOptional 3.50\" I.D. bore is available by request.\u003c\/li\u003e\n\u003cli\u003eSold individually.\u003c\/li\u003e\n\u003cli\u003eTwo Inner C’s are required to complete one axle assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eCrane Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eWeld-On Kingpin Inner C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e8620 Chromoly Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandard Bore\u003c\/td\u003e\n\u003ctd\u003e3.00\" I.D.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOptional Bore\u003c\/td\u003e\n\u003ctd\u003e3.50\" I.D. Available by Request\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Compatibility\u003c\/td\u003e\n\u003ctd\u003eDana 60 and GM 14-Bolt Steering Axle Applications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKnuckle Compatibility\u003c\/td\u003e\n\u003ctd\u003eFactory and Aftermarket Dana 60 Kingpin Outer Knuckles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWelding Compatibility\u003c\/td\u003e\n\u003ctd\u003eMIG or TIG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eWeld-On\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003eSold Individually\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eCast and Machined in the USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eAxle Application\u003c\/th\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDana 60\u003c\/td\u003e\n\u003ctd\u003eKingpin Front Steering Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGM 14-Bolt\u003c\/td\u003e\n\u003ctd\u003eFront Steering Axle Conversion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCustom Fabricated Axles\u003c\/td\u003e\n\u003ctd\u003eDana 60 Kingpin Steering Geometry\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for Dana 60 kingpin steering geometry.\u003c\/li\u003e\n\u003cli\u003eCompatible with factory and aftermarket Dana 60 kingpin outer knuckles.\u003c\/li\u003e\n\u003cli\u003eStandard configuration has a 3.00\" I.D. bore.\u003c\/li\u003e\n\u003cli\u003eAn optional 3.50\" I.D. bore is available by request.\u003c\/li\u003e\n\u003cli\u003eVerify axle tube outside diameter and wall thickness before ordering.\u003c\/li\u003e\n\u003cli\u003eProper caster, camber, knuckle alignment, and steering geometry must be established before final welding.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ch3\u003e1. What is a Dana 60 Inner C?\u003c\/h3\u003e\n\u003cp\u003eThe Inner C is welded to the end of a front axle tube and provides the mounting structure for the steering knuckle. It establishes the outer steering geometry and transfers steering, suspension, and wheel loads into the axle housing.\u003c\/p\u003e\n\u003ch3\u003e2. Why is this Inner C made from 8620 chromoly steel?\u003c\/h3\u003e\n\u003cp\u003eChromoly construction provides a strong foundation for extreme-duty steering axle applications while allowing material to be strategically placed in high-stress areas. This creates a lighter alternative to heavier traditional cast-iron components.\u003c\/p\u003e\n\u003ch3\u003e3. Is this Inner C designed for kingpin or ball-joint knuckles?\u003c\/h3\u003e\n\u003cp\u003eThis Inner C is specifically designed for Dana 60 kingpin steering systems. It is compatible with factory and aftermarket Dana 60 kingpin outer knuckles when the remaining axle components and geometry are properly matched.\u003c\/p\u003e\n\u003ch3\u003e4. Can this Inner C be used on a custom GM 14-Bolt steering axle?\u003c\/h3\u003e\n\u003cp\u003eYes. It can be used when converting or fabricating a GM 14-Bolt housing into a front steering axle using Dana 60 kingpin steering geometry. Axle tube size, shaft dimensions, knuckle spacing, and component compatibility must be verified during the build.\u003c\/p\u003e\n\u003ch3\u003e5. What must be checked before welding the Inner C to the axle tube?\u003c\/h3\u003e\n\u003cp\u003eConfirm axle width, tube diameter, shaft length, caster angle, camber position, knuckle orientation, and steering travel before final welding. Both Inner C’s should be accurately aligned and securely fixtured to prevent movement during the welding process.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e","brand":"Crane Axle","offers":[{"title":"Default Title","offer_id":54640080978195,"sku":"CA01000","price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/CA01000-Crane-Dana-60-Chromoly-Inner-C-1_125495b5-cf39-4112-9d82-b79aba3d66b8.jpg?v=1788282155"},{"product_id":"crane-axle-gm-14-bolt-steering-knuckle-builder-kit","title":"Crane Axle GM 14-Bolt Steering Knuckle Kingpin Conversion Kit","description":"\u003cp\u003eThe \u003cstrong\u003eGM 14-Bolt Steering Knuckle Builder Kit\u003c\/strong\u003e gives fabricators the major components needed to convert a GM 14-Bolt housing into a front steering axle. Designed by \u003cstrong\u003eCrane Axle\u003c\/strong\u003e, this system combines the strength of the 14-Bolt center section with proven Dana 60 kingpin steering geometry for rock crawlers, competition buggies, rock bouncers, and extreme off-road axle builds.\u003c\/p\u003e\n\u003cp\u003eThe kit combines 8620 chromoly inner C’s and interlocking outer knuckles with keyed 1018 cold-rolled steel high-steer arms, kingpin components, and Crane Axle’s REV14 Seal System. The interlocking steering components help transfer steering loads through the knuckle assembly, while the internal seal system helps control gear oil and contamination in a front-steer 14-Bolt conversion.\u003c\/p\u003e\n\u003ch4\u003eIncludes:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Chromoly Dana 60 Interlocking Outer Knuckles – Unfinished Steel\u003c\/li\u003e\n\u003cli\u003e(2) Chromoly Dana 60 Inner C’s – 3.00\" Standard Bore\u003c\/li\u003e\n\u003cli\u003e(2) 1018 Cold-Rolled Steel Interlocking High-Steer Arms\u003c\/li\u003e\n\u003cli\u003e(2) Crane Axle Kingpin Caps\u003c\/li\u003e\n\u003cli\u003e(1) Crane Axle Kingpin Components Kit\u003c\/li\u003e\n\u003cli\u003e(1) REV14 Seal System\u003c\/li\u003e\n\u003cli\u003eRequired Assembly Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eCrane Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eSteering Knuckle Builder Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Application\u003c\/td\u003e\n\u003ctd\u003eGM 14-Bolt Front Steering Conversion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSteering Geometry\u003c\/td\u003e\n\u003ctd\u003eDana 60 Kingpin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter Knuckle Material\u003c\/td\u003e\n\u003ctd\u003e8620 Chromoly Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner C Material\u003c\/td\u003e\n\u003ctd\u003e8620 Chromoly Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHigh-Steer Arm Material\u003c\/td\u003e\n\u003ctd\u003e1018 Cold-Rolled Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandard Inner C Bore\u003c\/td\u003e\n\u003ctd\u003e3.00\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Optional Inner C Bore\u003c\/td\u003e\n\u003ctd\u003eUp to 3.50\" OD Axle Tube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHigh-Steer Arm Design\u003c\/td\u003e\n\u003ctd\u003eKeyed Interlocking\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeal System\u003c\/td\u003e\n\u003ctd\u003eCrane Axle REV14 Internal Seal System\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eUnfinished Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eCustom Fabrication and Welding Required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eMajor Components Cast and Machined in the USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Housing\u003c\/td\u003e\n\u003ctd\u003eGM 14-Bolt Custom Front Steering Conversion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSteering System\u003c\/td\u003e\n\u003ctd\u003eDana 60 Kingpin-Style Components\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandard Axle Tube Size\u003c\/td\u003e\n\u003ctd\u003e3.00\" OD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOptional Axle Tube Size\u003c\/td\u003e\n\u003ctd\u003eUp to 3.50\" OD with Additional Machining\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Application\u003c\/td\u003e\n\u003ctd\u003eUniversal Custom Off-Road Fabrication\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for custom GM 14-Bolt front steering axle conversions.\u003c\/li\u003e\n\u003cli\u003eUses Dana 60 kingpin steering geometry and compatible service components.\u003c\/li\u003e\n\u003cli\u003eStandard inner C bore is designed for 3.00\" OD axle tubing.\u003c\/li\u003e\n\u003cli\u003eInner C’s may be machined for axle tubes up to 3.50\" OD.\u003c\/li\u003e\n\u003cli\u003eIntended for custom-fabricated rock crawlers, rock bouncers, competition buggies, Ultra4 cars, and tube-chassis vehicles.\u003c\/li\u003e\n\u003cli\u003eAxle tubes, housing, shafts, U-joints, spindles, hubs, brakes, steering cylinder, and related outer components are not listed as included.\u003c\/li\u003e\n\u003cli\u003eProfessional axle alignment, caster setup, machining, and welding are required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ch3\u003eWhat makes a GM 14-Bolt steering axle desirable?\u003c\/h3\u003e\n\u003cp\u003eThe GM 14-Bolt center section is widely used in extreme off-road builds because of its strength, large ring gear, availability, and serviceability. Converting it into a steering axle allows builders to use that strength at the front of the vehicle while retaining Dana 60 kingpin-style steering components.\u003c\/p\u003e\n\u003ch3\u003eWhat does the REV14 Seal System do?\u003c\/h3\u003e\n\u003cp\u003eThe REV14 Seal System provides an internal sealing solution for a front-steer 14-Bolt conversion. It helps contain gear oil within the center section while reducing the opportunity for dirt, mud, and water to enter through the axle tubes.\u003c\/p\u003e\n\u003ch3\u003eWhy use interlocking high-steer arms and knuckles?\u003c\/h3\u003e\n\u003cp\u003eThe keyed interlocking design helps transfer steering force into the knuckle body instead of relying only on bolt clamping force. This is especially important with large tires, high steering loads, and full-hydraulic steering systems.\u003c\/p\u003e\n\u003ch3\u003eWhy are the inner C’s and knuckles made from 8620 chromoly?\u003c\/h3\u003e\n\u003cp\u003e8620 chromoly provides a strong combination of toughness, fatigue resistance, and impact durability. These characteristics make it well suited for steering components exposed to repeated shock loads and high axle weight.\u003c\/p\u003e\n\u003ch3\u003eDoes this kit create a complete ready-to-run axle?\u003c\/h3\u003e\n\u003cp\u003eNo. This is a builder kit containing the primary knuckle, inner C, high-steer, kingpin, and sealing components. The axle housing, tubes, shafts, U-joints, wheel ends, brakes, steering system, and additional fabrication components must be selected separately.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e","brand":"Crane Axle","offers":[{"title":"Default Title","offer_id":54640081109267,"sku":"CA01026","price":2299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/CA01026-Crane-GM-14Bolt-Builder-Kit-1.jpg?v=1788282157"}],"url":"https:\/\/kohparts.com\/collections\/dana-60-knuckle-kits.oembed","provider":"KOHParts.com","version":"1.0","type":"link"}