{"title":"Axle Components: Axle Trusses","description":"\u003cp\u003eAxle Trusses focuses on axle trusses and related housing fabrication components for fabricators adding structure and mounting provisions to compatible off-road axle housings. A truss needs to fit the housing profile and the suspension arrangement around it. Check differential clearance, tube dimensions, bracket locations, and the room available beneath the chassis. New link geometry may change where loads enter the housing, so lay out the complete assembly before welding. Use the product dimensions and installation guidance to plan a truss that works with your axle, steering, and suspension movement rather than creating conflicts between them. Use the axle trusses product details to refine your parts list around the configuration you intend to build.\u003c\/p\u003e","products":[{"product_id":"steering-ram-mount-kit","title":"WOD Front Steering Ram Mount Kit for PSC 2.5\" x 8\" Double-Ended Cylinders","description":"\u003cp\u003eThe \u003cstrong\u003eSteering Ram Mount Kit for PSC 2.5\" x 8\" Double-Ended Hydraulic Cylinders\u003c\/strong\u003e is a complete weld-on mounting solution engineered by Wide Open Design for full hydraulic steering systems. Designed to fit Dana 44, Dana 60, GM 10-Bolt, GM 14-Bolt, and Dana 80 steering axles, this kit provides a strong foundation for mounting a PSC 2.5\" x 8\" double-ended steering ram on custom axle builds.\u003c\/p\u003e\n\u003cp\u003eThe kit includes a pre-bent 1.75\" x .188\" wall DOM tube with an internal sleeve, allowing builders to fine-tune the overall width before final welding. Combined with a laser-cut 1\/4\" steel mounting plate and reinforcement gussets, the finished assembly delivers the rigidity needed for rock crawlers, Ultra4 race cars, buggies, and other high-load hydraulic steering applications.\u003c\/p\u003e\n\u003ch4\u003eIncludes:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Pre-Bent 1.75\" x .188\" Wall DOM Tube\u003c\/li\u003e\n\u003cli\u003e(1) Tube Sleeve\u003c\/li\u003e\n\u003cli\u003e(1) 1\/4\" Steering Ram Mount Plate\u003c\/li\u003e\n\u003cli\u003e(2) Laser-Cut Steering Ram Tube Gussets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Steering ram clamps are sold separately. The mounting plate is designed to work with either one pair or two pairs of steering ram clamps depending on your installation.\u003c\/p\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eWide Open Design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eWeld-On Steering Ram Mount Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Steering Cylinder\u003c\/td\u003e\n\u003ctd\u003ePSC 2.5\" x 8\" Double-Ended Hydraulic Ram\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Axles\u003c\/td\u003e\n\u003ctd\u003eDana 44, Dana 60, GM 10-Bolt, GM 14-Bolt, Dana 80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross Tube\u003c\/td\u003e\n\u003ctd\u003e1.75\" x .188\" Wall DOM Steel (Pre-Bent)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTube Sleeve\u003c\/td\u003e\n\u003ctd\u003eIncluded for Width Adjustment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMount Plate Material\u003c\/td\u003e\n\u003ctd\u003e1\/4\" High-Strength Plate Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReinforcement\u003c\/td\u003e\n\u003ctd\u003eLaser-Cut Gussets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eWeld-On\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Manufacture\u003c\/td\u003e\n\u003ctd\u003eMade in the USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003cp\u003eDesigned for custom front steering axle applications using a PSC 2.5\" x 8\" double-ended hydraulic steering cylinder.\u003c\/p\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eComponent\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSteering Cylinder\u003c\/td\u003e\n\u003ctd\u003ePSC 2.5\" x 8\" Double-Ended Ram\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Housings\u003c\/td\u003e\n\u003ctd\u003eDana 44, Dana 60, GM 10-Bolt, GM 14-Bolt, Dana 80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSteering System\u003c\/td\u003e\n\u003ctd\u003eFull Hydraulic Steering\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned specifically for PSC 2.5\" x 8\" double-ended steering cylinders.\u003c\/li\u003e\n\u003cli\u003eCompatible with one or two pairs of steering ram clamps (sold separately).\u003c\/li\u003e\n\u003cli\u003eThe included DOM cross tube can be trimmed to match custom axle widths before welding.\u003c\/li\u003e\n\u003cli\u003eProper ram placement, steering geometry, and axle clearance should be verified before final welding.\u003c\/li\u003e\n\u003cli\u003eIntended for experienced builders fabricating custom hydraulic steering systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ch3\u003e1. Why is steering ram placement important?\u003c\/h3\u003e\n\u003cp\u003eThe steering ram should remain as parallel to the tie rod as possible throughout suspension travel. Proper placement minimizes bump steer, prevents cylinder bind, and keeps steering loads distributed evenly across the axle.\u003c\/p\u003e\n\u003ch3\u003e2. Why use a pre-bent DOM cross tube?\u003c\/h3\u003e\n\u003cp\u003eThe pre-bent DOM tube provides excellent strength while allowing clearance for differential housings, suspension components, and steering links. The included sleeve lets builders fine-tune the overall width before completing the welds.\u003c\/p\u003e\n\u003ch3\u003e3. Can this kit be used with hydraulic assist steering?\u003c\/h3\u003e\n\u003cp\u003eNo. This mount is designed around a PSC 2.5\" x 8\" double-ended steering cylinder used in full hydraulic steering systems. Hydraulic assist steering uses a different style of cylinder and mounting arrangement.\u003c\/p\u003e\n\u003ch3\u003e4. Why are gussets included?\u003c\/h3\u003e\n\u003cp\u003eHydraulic steering cylinders generate substantial steering loads during rock crawling and competition use. The laser-cut gussets reinforce the mounting structure, reducing flex and helping distribute forces into the cross tube.\u003c\/p\u003e\n\u003ch3\u003e5. What should be checked before final welding?\u003c\/h3\u003e\n\u003cp\u003eCycle the suspension and steering through their full range of motion to verify cylinder travel, tie rod clearance, differential clearance, steering arm alignment, and chassis interference before permanently welding the mount to the axle housing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e","brand":"Wide Open Design","offers":[{"title":"Default Title","offer_id":54639914025235,"sku":"WF03031","price":209.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/WF03031-Steering-Ram-Mount-Kit-1_09431f05-9a87-4124-834f-898d37288ed8.jpg?v=1788281274"},{"product_id":"14-bolt-tie-in-with-pinion-guard","title":"WOD GM 14-Bolt Pinion Guard \u0026 Truss Tie-In","description":"\u003cp\u003eThe \u003cstrong\u003eWide Open Design GM 14-Bolt Pinion Tie-In with Pinion Guard\u003c\/strong\u003e reinforces and protects one of the most vulnerable areas of a GM 14-Bolt axle. Manufactured from 3\/8\" and 1\/4\" steel plate, this weld-together kit connects the pinion area to the axle truss, creating a more rigid structure while shielding the yoke, U-joint, and pinion support from rocks, ledges, and trail impacts.\u003c\/p\u003e\n\u003cp\u003eThe 3\/8\" pinion guard is drilled and tapped to simplify installation and service without requiring separate backing nuts. Its contoured design provides clearance for 1350, 1410, and 1480 yokes, making it a strong choice for rock bouncers, crawlers, Ultra4 cars, and heavy-duty trail rigs using a Wide Open Design 14-Bolt truss.\u003c\/p\u003e\n\u003ch4\u003eIncludes:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Wide Open Design Pinion Tie-In\u003c\/li\u003e\n\u003cli\u003e(1) 3\/8\" Steel Pinion Guard\u003c\/li\u003e\n\u003cli\u003e(9) Mounting Bolts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eWide Open Design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003ePinion Guard and Truss Tie-In Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Application\u003c\/td\u003e\n\u003ctd\u003eGM 14-Bolt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTie-In Material\u003c\/td\u003e\n\u003ctd\u003e1\/4\" Steel Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePinion Guard Material\u003c\/td\u003e\n\u003ctd\u003e3\/8\" Steel Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePinion Guard Design\u003c\/td\u003e\n\u003ctd\u003eDrilled and Tapped Back Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eYoke Clearance\u003c\/td\u003e\n\u003ctd\u003e1350, 1410, and 1480\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eWeld-Together \/ Weld-On\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Truss Compatibility\u003c\/td\u003e\n\u003ctd\u003eWide Open Design GM 14-Bolt Truss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOther Truss Compatibility\u003c\/td\u003e\n\u003ctd\u003ePossible with Custom Modification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003e(9) Bolts Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eMade in the USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Platform\u003c\/td\u003e\n\u003ctd\u003eGM 14-Bolt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Truss System\u003c\/td\u003e\n\u003ctd\u003eWide Open Design 14-Bolt Truss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eYoke Size\u003c\/td\u003e\n\u003ctd\u003e1350, 1410, or 1480\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Application\u003c\/td\u003e\n\u003ctd\u003eUniversal Custom Off-Road Fabrication\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned specifically around Wide Open Design GM 14-Bolt truss systems.\u003c\/li\u003e\n\u003cli\u003eMay be adapted to other axle trusses with trimming, fitting, or custom fabrication.\u003c\/li\u003e\n\u003cli\u003eProvides clearance for 1350, 1410, and 1480 yokes.\u003c\/li\u003e\n\u003cli\u003eSuitable for front or rear custom 14-Bolt axle builds when truss and driveline clearance allow.\u003c\/li\u003e\n\u003cli\u003eWelding and final fitting are required.\u003c\/li\u003e\n\u003cli\u003eVerify pinion angle, driveshaft clearance, suspension travel, and yoke dimensions before final welding.\u003c\/li\u003e\n\u003cli\u003eProfessional fabrication and welding are recommended.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCommon Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRock bouncers\u003c\/li\u003e\n\u003cli\u003eRock crawlers\u003c\/li\u003e\n\u003cli\u003eUltra4 race vehicles\u003c\/li\u003e\n\u003cli\u003eHeavy-duty trail rigs\u003c\/li\u003e\n\u003cli\u003eCustom tube chassis builds\u003c\/li\u003e\n\u003cli\u003eHigh-horsepower GM 14-Bolt axle applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eTech Insight\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ch3\u003eWhat does the pinion tie-in do?\u003c\/h3\u003e\n\u003cp\u003eThe tie-in connects the pinion support area to the axle truss, allowing impact and drivetrain loads to be distributed through a larger portion of the housing instead of being concentrated at the pinion nose.\u003c\/p\u003e\n\u003ch3\u003eWhy is the pinion area vulnerable off-road?\u003c\/h3\u003e\n\u003cp\u003eThe yoke, U-joint, and pinion support often sit low and forward on the axle housing, leaving them exposed to rocks, ledges, and hard landings. A direct hit can damage the yoke, driveshaft, pinion bearings, or housing.\u003c\/p\u003e\n\u003ch3\u003eWhat is the benefit of a drilled and tapped guard?\u003c\/h3\u003e\n\u003cp\u003eThe tapped 3\/8\" back plate allows the bolts to thread directly into the guard. This eliminates loose nuts behind the assembly, simplifies removal, and makes trail-side or shop service easier.\u003c\/p\u003e\n\u003ch3\u003eWill this guard clear a 1480 yoke?\u003c\/h3\u003e\n\u003cp\u003eYes. The guard is designed to provide clearance for 1350, 1410, and 1480 yokes. Final driveshaft angle and operating clearance should still be checked throughout the full suspension cycle.\u003c\/p\u003e\n\u003ch3\u003eWhy tie the guard into the truss instead of mounting it only near the pinion?\u003c\/h3\u003e\n\u003cp\u003eA guard mounted only at the pinion can transfer impact directly into the pinion support. Tying the guard into the truss creates a stronger load path that helps spread impact forces across the reinforced axle structure.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e","brand":"Wide Open Design","offers":[{"title":"Default Title","offer_id":54639914123539,"sku":"WA04080","price":115.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/WA04080-14-Bolt-Tie-In-Pinion-Guard-1.jpg?v=1788281248"},{"product_id":"rear-universal-axle-truss","title":"WOD Universal Rear Axle Truss","description":"\u003cp\u003eThe \u003cstrong\u003eWide Open Design Universal Rear Axle Truss\u003c\/strong\u003e is engineered to reinforce rear axle housings subjected to extreme horsepower, oversized tires, and punishing off-road terrain. Manufactured from heavy-duty 1\/4\" cold rolled steel, this universal truss significantly increases axle housing rigidity while helping reduce tube flex during rock crawling, Ultra4 racing, mud racing, trail riding, and high-performance street applications.\u003c\/p\u003e\n\u003cp\u003eDesigned to fit a wide range of popular rear axle housings—including D\u003cstrong\u003eana 44, Dana 60, Dana 70, Dana 80, and GM 14-Bolt axles\u003c\/strong\u003e—the precision-cut profile provides excellent weld contact for a strong, durable installation. Whether you're building a custom axle from scratch or reinforcing an existing housing, this Made-in-USA truss is an ideal foundation for demanding off-road builds.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Wide Open Design Universal Rear Axle Truss\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eWide Open Design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eUniversal Rear Axle Truss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e1\/4\" Cold Rolled Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e34.125\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e7.50\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e2.50\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDesign\u003c\/td\u003e\n\u003ctd\u003ePrecision-cut and contoured for maximum weld contact\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eWeld-On\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eRaw Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eMade in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003cp\u003e\u003cstrong\u003eUniversal Rear Axle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDana 44 Rear Axles\u003c\/li\u003e\n\u003cli\u003eDana 60 Rear Axles\u003c\/li\u003e\n\u003cli\u003eDana 70 Rear Axles\u003c\/li\u003e\n\u003cli\u003eDana 80 Rear Axles\u003c\/li\u003e\n\u003cli\u003eGM 14-Bolt Rear Axles\u003c\/li\u003e\n\u003cli\u003eCustom Fabricated Rear Axle Housings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for universal rear axle applications.\u003c\/li\u003e\n\u003cli\u003eWelding and final fitting are required.\u003c\/li\u003e\n\u003cli\u003eMay require trimming depending on axle housing design and suspension brackets.\u003c\/li\u003e\n\u003cli\u003eIdeal for rock crawlers, Ultra4 cars, race trucks, trail rigs, and custom fabrication projects.\u003c\/li\u003e\n\u003cli\u003eCompatible with additional axle reinforcement components such as pinion guards and axle tube gussets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ch3\u003eWhy install an axle truss?\u003c\/h3\u003e\n\u003cp\u003eLarge tires, high horsepower, lockers, and aggressive off-road driving place tremendous stress on axle housings. A properly designed truss helps reduce axle tube flex, minimizes housing deflection, and maintains more consistent ring-and-pinion alignment under load.\u003c\/p\u003e\n\u003ch3\u003eWhat is axle \"smiling\"?\u003c\/h3\u003e\n\u003cp\u003e\"Smiling\" describes the permanent upward bending of axle tubes caused by repeated high-torque loads and hard impacts. Once an axle housing bends, gear setup, bearing preload, and axle shaft alignment can all be affected. A heavy-duty truss helps resist this type of deformation.\u003c\/p\u003e\n\u003ch3\u003eWhy is a truss important on a GM 14-Bolt?\u003c\/h3\u003e\n\u003cp\u003eAlthough the GM 14-Bolt is one of the strongest production rear axles available, extreme rock crawling and competition use can still cause axle tube movement where the tubes are pressed and plug-welded into the center section. Pairing this truss with a pinion guard and housing tie-ins helps create a rigid boxed structure that better distributes suspension and drivetrain loads.\u003c\/p\u003e\n\u003ch3\u003eCan this truss be modified for custom applications?\u003c\/h3\u003e\n\u003cp\u003eYes. Because it is supplied as a weld-on universal truss, builders can trim or notch the truss as needed to clear suspension brackets, link mounts, shock mounts, or custom chassis components while maintaining excellent reinforcement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e","brand":"Wide Open Design","offers":[{"title":"Default Title","offer_id":54639914483987,"sku":"WF03012","price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/WF03012-Rear-Universal-Axle-Truss-Weld-On-1_0b4be6c7-c5d1-454b-84b7-d674673f7c1d.jpg?v=1792013025"},{"product_id":"14-bolt-drivers-drop-front-truss","title":"WOD GM 14-Bolt Driver Drop Front Axle Truss","description":"\u003cp\u003eThe \u003cstrong\u003eWide Open Design GM 14-Bolt Driver Drop Front Axle Truss\u003c\/strong\u003e reinforces driver-side drop 14-Bolt steering axle housings used in high-horsepower off-road and competition builds. Manufactured by \u003cstrong\u003eWide Open Design\u003c\/strong\u003e from 1\/4\" steel plate, the truss is precision cut and contoured around the differential housing to increase weld contact, strengthen the long-side tube area, and reduce housing movement under hard steering, suspension, and drivetrain loads.\u003c\/p\u003e\n\n\u003cp\u003eChoose a fully welded, made-to-order truss or a flat plate kit for builders who prefer to assemble and weld the structure themselves. Optional suspension and steering tabs can be added to support custom link geometry, shock placement, and hydraulic steering layouts on rock crawlers, rock bouncers, Ultra4 cars, and fabricated tube-chassis vehicles.\u003c\/p\u003e\n\n\u003ch4\u003eOrdering Options:\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eFully Welded Truss – Made to Order\u003c\/li\u003e\n  \u003cli\u003eFlat Plate Kit – DIY Weld-It-Yourself\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eIncludes:\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e(1) Wide Open Design 14-Bolt Driver Drop Front Axle Truss\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eLead Time:\u003c\/strong\u003e Fully welded trusses are made to order and require approximately 2 business days before shipping.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n  \u003csummary class=\"details__header\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\n  \u003cdiv class=\"details-content rte\"\u003e\n    \u003ctable class=\"custom-specs-table\"\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003cth\u003eSpecification\u003c\/th\u003e\n          \u003cth\u003eDetails\u003c\/th\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eManufacturer\u003c\/td\u003e\n          \u003ctd\u003eWide Open Design\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003ePart Number\u003c\/td\u003e\n          \u003ctd\u003eNot Provided\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eProduct Type\u003c\/td\u003e\n          \u003ctd\u003eFront Axle Truss\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eAxle Application\u003c\/td\u003e\n          \u003ctd\u003eGM 14-Bolt Driver Drop Front Steering Axle\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMaterial\u003c\/td\u003e\n          \u003ctd\u003e1\/4\" Steel Plate\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eLength\u003c\/td\u003e\n          \u003ctd\u003e41.451\"\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eHeight\u003c\/td\u003e\n          \u003ctd\u003e6.126\"\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eDepth\u003c\/td\u003e\n          \u003ctd\u003e2.50\"\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eDesign\u003c\/td\u003e\n          \u003ctd\u003ePrecision Cut and Contoured for GM 14-Bolt Housing\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eInstallation Options\u003c\/td\u003e\n          \u003ctd\u003eFully Welded or DIY Flat Plate Kit\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eInstallation Type\u003c\/td\u003e\n          \u003ctd\u003eWeld-On\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eCountry of Origin\u003c\/td\u003e\n          \u003ctd\u003eMade in the USA\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n  \u003csummary class=\"details__header\"\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\n  \u003cdiv class=\"details-content rte\"\u003e\n    \u003ctable class=\"custom-specs-table\"\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003cth\u003eApplication\u003c\/th\u003e\n          \u003cth\u003eCompatibility\u003c\/th\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eAxle Platform\u003c\/td\u003e\n          \u003ctd\u003eGM 14-Bolt Front Steering Axle\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eDifferential Orientation\u003c\/td\u003e\n          \u003ctd\u003eDriver-Side Drop\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eVehicle Application\u003c\/td\u003e\n          \u003ctd\u003eUniversal Custom Off-Road Fabrication\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eCommon Builds\u003c\/td\u003e\n          \u003ctd\u003eRock Crawlers, Rock Bouncers, Ultra4 Cars, and Competition Buggies\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n\n    \u003ch3\u003eFitment Notes\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eDesigned specifically for driver-drop GM 14-Bolt front steering axle housings.\u003c\/li\u003e\n      \u003cli\u003eNot intended for passenger-drop axle configurations without significant modification.\u003c\/li\u003e\n      \u003cli\u003eThe DIY flat plate version requires assembly, fitting, and welding.\u003c\/li\u003e\n      \u003cli\u003eThe fully welded option still requires final fitting and welding to the axle housing.\u003c\/li\u003e\n      \u003cli\u003eSuspension brackets, steering mounts, pinion guards, and housing tie-ins are not included unless selected separately.\u003c\/li\u003e\n      \u003cli\u003eVerify differential orientation, axle width, tube placement, suspension geometry, and steering clearance before installation.\u003c\/li\u003e\n      \u003cli\u003eProfessional axle setup and welding are recommended.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n  \u003csummary class=\"details__header\"\u003e\u003cstrong\u003eTech Insight\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\n  \u003cdiv class=\"details-content rte\"\u003e\n    \u003ch3\u003eWhat does a front axle truss do?\u003c\/h3\u003e\n    \u003cp\u003eA front axle truss connects the differential housing and axle tubes into a more rigid structure. This helps reduce tube flex, housing distortion, and movement where the tubes enter the center section under steering, suspension, and drivetrain loads.\u003c\/p\u003e\n\n    \u003ch3\u003eWhy is the long side of a driver-drop axle vulnerable?\u003c\/h3\u003e\n    \u003cp\u003eThe longer axle tube has more leverage acting against it during hard landings, side loading, and hydraulic steering input. Reinforcing that area helps reduce bending and supports more consistent axle shaft and steering geometry.\u003c\/p\u003e\n\n    \u003ch3\u003eWhat is the difference between the welded and flat plate options?\u003c\/h3\u003e\n    \u003cp\u003eThe fully welded option arrives assembled and ready for final fitting to the axle housing. The flat plate kit is supplied as individual components for builders who want to control assembly, weld sequence, and integration with their suspension mounts.\u003c\/p\u003e\n\n    \u003ch3\u003eShould the truss be installed before suspension brackets?\u003c\/h3\u003e\n    \u003cp\u003eIn most custom builds, it is best to establish axle width, pinion angle, caster, steering placement, and suspension geometry before permanently welding the truss and related brackets. Planning the entire axle package together helps prevent clearance conflicts.\u003c\/p\u003e\n\n    \u003ch3\u003eShould this truss be paired with a pinion guard or housing tie-in?\u003c\/h3\u003e\n    \u003cp\u003eFor extreme rock crawling and competition use, a pinion guard and center-section tie-in can provide additional protection and help distribute impact and suspension loads across more of the axle housing.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e","brand":"Wide Open Design","offers":[{"title":"Welded (Made to Order)","offer_id":54639914549523,"sku":"WF03013","price":329.99,"currency_code":"USD","in_stock":true},{"title":"(DIY Weld-It-Yourself)","offer_id":54639914582291,"sku":"F021033","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/WF03013-14-Bolt-Steel-Driver-Drop-Weld-On-Truss-1.jpg?v=1791830843"},{"product_id":"gm-dana-60-front-axle-truss","title":"WOD GM Dana 60 Front Axle Truss","description":"\u003cp\u003eThe Wide Open Design GM Dana 60 Front Axle Truss is engineered to strengthen General Motors and Dodge Dana 60 front axles used in demanding environments. Weld ready and built from 1\/4\" thick steel, this truss is precision cut and contoured to fit tightly to the Dana 60 differential housing for maximum weld surface area and long-term durability.\u003c\/p\u003e\n\u003cp\u003eBy extending across the majority of the long-side axle tube, this truss significantly reduces tube flex and housing distortion under hard use. It’s an ideal foundation for custom axle builds where strength, reliability, and clean fitment matter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) GM\/Dodge Dana 60 Front Axle Truss\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" height=\"14\" width=\"14\"\u003e\u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M2.75 7H11.25\" class=\"vertical\"\u003e\u003c\/path\u003e\u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M7 2.75L7 11.25\" class=\"horizontal\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003cul\u003e\n\u003cli\u003eAxle Type: GM \/ Dodge Dana 60 Front\u003c\/li\u003e\n\u003cli\u003eMaterial: 1\/4\" Steel Plate\u003c\/li\u003e\n\u003cli\u003eLength: 41\"\u003c\/li\u003e\n\u003cli\u003eHeight: 6\"\u003c\/li\u003e\n\u003cli\u003eDepth: 2.5\"\u003c\/li\u003e\n\u003cli\u003eDesign: Cut and contoured for tight Dana 60 differential housing fit\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" height=\"14\" width=\"14\"\u003e\u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M2.75 7H11.25\" class=\"vertical\"\u003e\u003c\/path\u003e\u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M7 2.75L7 11.25\" class=\"horizontal\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003cul\u003e\n\u003cli\u003eGM Dana 60 Front Axles\u003c\/li\u003e\n\u003cli\u003eDodge Dana 60 Front Axles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall Note:\u003c\/strong\u003e Welding required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment Note: \u003c\/strong\u003eDesigned for custom, off-road, and competition axle builds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eTech Insight\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" height=\"14\" width=\"14\"\u003e\u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M2.75 7H11.25\" class=\"vertical\"\u003e\u003c\/path\u003e\u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M7 2.75L7 11.25\" class=\"horizontal\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003cp\u003eDana 60 front housings experience extreme torsional and bending loads during off-road use, especially with larger tires and high horsepower drivetrains. This truss ties the differential housing into the long-side tube, helping prevent tube rotation and housing flex. Adding optional link tabs allows you to tailor the setup for custom suspension and steering geometry.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e","brand":"Wide Open Design","offers":[{"title":"Default Title","offer_id":54639914647827,"sku":"WF03015","price":329.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/WF03015-GM-Dana-60-Weld-On-Front-Axle-Truss-1_f3ae1622-a866-411f-8004-d5424e65d8ad.jpg?v=1792012996"},{"product_id":"late-ford-dana-60-front-axle-truss","title":"WOD Late Ford Dana 60 Front Axle Truss - Weld-On","description":"\u003cp\u003eThe \u003cstrong\u003eWOD Late Ford Dana 60 Front Axle Truss\u003c\/strong\u003e is engineered to reinforce late-model Ford Dana 60 front axle housings found in Super Duty trucks and custom off-road builds. Precision laser cut from heavy-duty 1\/4\" steel plate, the truss is contoured to closely match the differential housing and extends across most of the long-side axle tube, creating a rigid structure that helps reduce housing flex under extreme loads.\u003c\/p\u003e\n\u003cp\u003eWhether you're building a rock crawler, Ultra4 race car, rock bouncer, trail rig, or one-ton axle swap, this weld-on truss helps strengthen one of the most critical components in your suspension. By reducing axle tube deflection and housing distortion, it helps maintain suspension geometry, steering alignment, and overall axle durability in severe off-road conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) WOD Late Ford Dana 60 Front Axle Truss\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Welding is required. Verify axle configuration before ordering.\u003c\/p\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eWide Open Design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eFront Axle Truss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Compatibility\u003c\/td\u003e\n\u003ctd\u003eLate Ford Dana 60 Front Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e1\/4\" Steel Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e38.625\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e6.75\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e2.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePrecision Laser Cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eWeld-On\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eMade in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible Axles:\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eAxle\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-250 Super Duty\u003c\/td\u003e\n\u003ctd\u003e1999-2004\u003c\/td\u003e\n\u003ctd\u003eLate Dana 60 Front\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-350 Super Duty\u003c\/td\u003e\n\u003ctd\u003e1999-2004\u003c\/td\u003e\n\u003ctd\u003eLate Dana 60 Front\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eExcursion\u003c\/td\u003e\n\u003ctd\u003e2000-2005\u003c\/td\u003e\n\u003ctd\u003eLate Dana 60 Front\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned specifically for late-model Ford Dana 60 front axle housings.\u003c\/li\u003e\n\u003cli\u003eIdeal for one-ton axle swaps, custom off-road builds, Ultra4 race cars, rock bouncers, and trail rigs.\u003c\/li\u003e\n\u003cli\u003eVerify axle tube diameter, differential casting, steering configuration, and suspension clearance before welding.\u003c\/li\u003e\n\u003cli\u003eMinor fitting may be required depending on existing axle modifications.\u003c\/li\u003e\n\u003cli\u003eProfessional welding is recommended for maximum strength and proper fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ch3\u003eWhy install an axle truss?\u003c\/h3\u003e\n\u003cp\u003eLarge tires, locking differentials, high-horsepower engines, and aggressive off-road driving can cause the axle tubes to flex or rotate under load. An axle truss reinforces the housing, helping maintain proper alignment and reducing long-term fatigue.\u003c\/p\u003e\n\u003ch3\u003eWhy does this truss extend across the long-side axle tube?\u003c\/h3\u003e\n\u003cp\u003eThe long-side tube experiences the greatest bending loads during hard impacts and high-traction situations. Extending the truss across this section increases housing rigidity and distributes loads more evenly throughout the axle assembly.\u003c\/p\u003e\n\u003ch3\u003eWill this improve steering and suspension geometry?\u003c\/h3\u003e\n\u003cp\u003eBy reducing housing flex, the truss helps minimize unwanted movement that can affect caster, camber, and steering alignment during severe off-road use. A more rigid housing also helps suspension components operate more consistently.\u003c\/p\u003e\n\u003ch3\u003eDoes this fit all Dana 60 front axles?\u003c\/h3\u003e\n\u003cp\u003eNo. This truss is designed specifically for late-model Ford Dana 60 front axle housings. Earlier Ford, Dodge, GM, kingpin, and aftermarket Dana 60 housings use different castings and tube configurations.\u003c\/p\u003e\n\u003ch3\u003eCan it be installed with the axle still under the vehicle?\u003c\/h3\u003e\n\u003cp\u003eWhile possible in some applications, installation is generally easier with the axle removed. Proper preparation, fit-up, and controlled welding procedures help minimize housing distortion and produce the strongest finished installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e","brand":"Wide Open Design","offers":[{"title":"Default Title","offer_id":54639914713363,"sku":"WF03016","price":329.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/WF03016-Late-Ford-Dana-60-Weld-On-Front-Axle-Truss-1.jpg?v=1792012996"},{"product_id":"early-ford-dana-60-front-truss","title":"WOD Early Ford Dana 60 Front Axle Truss - Weld-On","description":"\n\u003cp\u003eThe \u003cstrong\u003eWOD Early Ford Dana 60 Front Axle Truss\u003c\/strong\u003e is a weld-on reinforcement designed to increase axle housing rigidity and reduce axle tube deflection in demanding off-road applications. Precision-cut from 1\/4\" steel plate, the truss is contoured to fit the differential housing and extend across the long-side axle tube, providing additional structural support where high steering, suspension, and drivetrain loads can stress the housing.\u003c\/p\u003e\n\n\u003cp\u003eDesigned for compatible Early Ford Dana 60 front axle housings, this heavy-duty truss helps distribute loads across a larger portion of the axle assembly. Its 38.625\" overall width provides reinforcement for rock crawlers, rock bouncers, trail rigs, and custom solid axle swaps running large tires, locking differentials, and high-torque drivetrains. Welding and final fitment are required, making it a practical upgrade for builders strengthening an existing axle or assembling a custom off-road front axle.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) WOD Early Ford Dana 60 Front Axle Truss\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Welding and custom fabrication are required. Verify your axle housing configuration, differential location, and suspension clearance before installation. This truss is designed for Early Ford Dana 60 front axle applications and should not be assumed to fit other Dana 60 housing configurations.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\n\u003cstrong\u003eSpecifications\u003c\/strong\u003e\n\u003cspan class=\"svg-wrapper icon-plus\"\u003e\n\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003c\/svg\u003e\n\u003c\/span\u003e\n\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eWide Open Design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eFront Axle Housing Truss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAxle Platform\u003c\/th\u003e\n\u003ctd\u003eEarly Ford Dana 60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAxle Position\u003c\/th\u003e\n\u003ctd\u003eFront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e1\/4\" Steel Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial Thickness\u003c\/th\u003e\n\u003ctd\u003e0.250\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall Width\u003c\/th\u003e\n\u003ctd\u003e38.625\" (38-5\/8\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall Height\u003c\/th\u003e\n\u003ctd\u003e6.75\" (6-3\/4\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall Depth\u003c\/th\u003e\n\u003ctd\u003e2.5\" (2-1\/2\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003ePrecision-Cut Steel Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDesign\u003c\/th\u003e\n\u003ctd\u003eContoured Differential Housing Reinforcement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eDifferential Housing \u0026amp; Long-Side Axle Tube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInstallation Type\u003c\/th\u003e\n\u003ctd\u003eWeld-On \/ Custom Fabrication\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eWeld-Ready\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePrimary Application\u003c\/th\u003e\n\u003ctd\u003eEarly Ford Dana 60 Front Axle Reinforcement for Off-Road \u0026amp; Custom Builds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eMade in the USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eQuantity\u003c\/th\u003e\n\u003ctd\u003e(1) Axle Truss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e\u003cstrong\u003eDimensional Note:\u003c\/strong\u003e Measurements are based on the WOD Early Ford Dana 60 truss drawing. Verify available clearance around the axle housing, steering components, and suspension mounting locations before installation.\u003c\/p\u003e\n\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\n\u003cstrong\u003eFitment\u003c\/strong\u003e\n\u003cspan class=\"svg-wrapper icon-plus\"\u003e\n\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003c\/svg\u003e\n\u003c\/span\u003e\n\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003cth\u003eAxle Application\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-Series \/ Custom Builds\u003c\/td\u003e\n\u003ctd\u003eVerify Housing\u003c\/td\u003e\n\u003ctd\u003eCompatible Early Ford Dana 60 Front Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eCustom Off-Road Vehicles\u003c\/td\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eEarly Ford Dana 60 Front Axle Swap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e\u003cstrong\u003eAxle Compatibility:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for compatible Early Ford Dana 60 front axle housings.\u003c\/li\u003e\n\u003cli\u003eSuitable for custom solid axle swaps using the specified housing.\u003c\/li\u003e\n\u003cli\u003eIntended for front axle reinforcement applications.\u003c\/li\u003e\n\u003cli\u003eNot a universal fit for all Ford Dana 60 front axle generations.\u003c\/li\u003e\n\u003cli\u003eNot intended for Dana 44 or other axle platforms without substantial modification.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eCommon Applications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRock Crawlers \u0026amp; Rock Bouncers\u003c\/li\u003e\n\u003cli\u003eHeavy-Duty Trail Rigs\u003c\/li\u003e\n\u003cli\u003eCustom Ford Truck Builds\u003c\/li\u003e\n\u003cli\u003eTube-Chassis Off-Road Vehicles\u003c\/li\u003e\n\u003cli\u003eSolid Axle Swaps\u003c\/li\u003e\n\u003cli\u003eHigh-Torque Off-Road Builds\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eInstallation Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVerify the axle housing is an Early Ford Dana 60 before ordering.\u003c\/li\u003e\n\u003cli\u003eConfirm differential housing shape, axle tube location, and available mounting clearance.\u003c\/li\u003e\n\u003cli\u003eMock up the truss before welding to verify proper contact with the housing and axle tube.\u003c\/li\u003e\n\u003cli\u003eCheck clearance around steering linkages, suspension brackets, spring mounts, and other axle-mounted components.\u003c\/li\u003e\n\u003cli\u003eRemove coatings, rust, and contaminants from welding surfaces before installation.\u003c\/li\u003e\n\u003cli\u003eTack weld and verify axle alignment before completing final welds.\u003c\/li\u003e\n\u003cli\u003eUse controlled welding procedures to reduce the risk of axle housing distortion.\u003c\/li\u003e\n\u003cli\u003eInspect axle tube alignment and housing straightness during fabrication.\u003c\/li\u003e\n\u003cli\u003eFinal trimming or fitting may be required for modified axle assemblies.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eBuilder Note:\u003c\/strong\u003e Axle trusses should be installed during the fabrication stage whenever possible, before suspension brackets, steering mounts, and other components limit access to the housing. Mock up the complete axle assembly and cycle the steering and suspension through their intended range of motion before final welding. Proper alignment and controlled heat input are important for maintaining axle housing integrity.\u003c\/p\u003e\n\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\n\u003cstrong\u003eFAQ\u003c\/strong\u003e\n\u003cspan class=\"svg-wrapper icon-plus\"\u003e\n\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003c\/svg\u003e\n\u003c\/span\u003e\n\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\n\u003ch3\u003eWhat does an axle truss do on a Dana 60?\u003c\/h3\u003e\n\u003cp\u003eAn axle truss reinforces the axle housing by distributing bending and torsional loads across a larger structural area. This helps increase housing rigidity and reduce axle tube deflection under demanding off-road conditions, especially when running larger tires, locking differentials, and high-torque drivetrains.\u003c\/p\u003e\n\n\u003ch3\u003eWill this truss fit every Ford Dana 60 front axle?\u003c\/h3\u003e\n\u003cp\u003eNo. This truss is designed specifically for compatible Early Ford Dana 60 front axle housings. Ford Dana 60 axles have been produced in different configurations, so verify the housing shape, differential location, and axle tube arrangement before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eWhat material is the WOD Early Ford Dana 60 truss made from?\u003c\/h3\u003e\n\u003cp\u003eThe truss is precision-cut from 1\/4\" thick steel plate for weld-on reinforcement of the axle housing and long-side axle tube.\u003c\/p\u003e\n\n\u003ch3\u003eWhat are the dimensions of the Early Ford Dana 60 axle truss?\u003c\/h3\u003e\n\u003cp\u003eThe truss measures 38.625\" wide, 6.75\" high, and 2.5\" deep according to the WOD product drawing. These dimensions should be checked against the available space around the axle and suspension components.\u003c\/p\u003e\n\n\u003ch3\u003eWhy does the truss extend across the long-side axle tube?\u003c\/h3\u003e\n\u003cp\u003eThe longer axle tube has a greater unsupported span and can experience increased bending loads during aggressive off-road use. Extending reinforcement across this section helps distribute stress and improve overall housing rigidity.\u003c\/p\u003e\n\n\u003ch3\u003eDoes the WOD Dana 60 axle truss require welding?\u003c\/h3\u003e\n\u003cp\u003eYes. This is a weld-on reinforcement component that requires proper fitting, surface preparation, and welding. Professional fabrication is recommended to maintain axle alignment and prevent heat-related housing distortion.\u003c\/p\u003e\n\n\u003ch3\u003eCan this truss be used on a custom solid axle swap?\u003c\/h3\u003e\n\u003cp\u003eYes. It can be used in custom off-road builds and solid axle swaps equipped with a compatible Early Ford Dana 60 front axle housing. Vehicle-specific suspension and steering clearance must be verified during installation.\u003c\/p\u003e\n\n\u003ch3\u003eWill an axle truss help prevent axle tube bending?\u003c\/h3\u003e\n\u003cp\u003eA properly installed truss increases structural support and helps resist axle housing deflection under load. However, it cannot guarantee that the axle housing will never bend or fail under extreme impacts or operating conditions.\u003c\/p\u003e\n\n\u003ch3\u003eCan the truss help prevent axle tubes from rotating in the differential housing?\u003c\/h3\u003e\n\u003cp\u003eBy reinforcing the connection between the differential housing and axle tube, a properly fitted and welded truss can help reduce movement at this junction. Proper weld preparation, penetration, and axle housing condition are critical to the effectiveness of the reinforcement.\u003c\/p\u003e\n\n\u003ch3\u003eShould I install the truss before welding suspension brackets?\u003c\/h3\u003e\n\u003cp\u003eWhenever possible, install and mock up the truss during the early fabrication stage. This allows easier access to the axle housing and helps ensure adequate clearance for suspension brackets, steering components, and other axle-mounted hardware before final welding.\u003c\/p\u003e\n\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e\n","brand":"Wide Open Design","offers":[{"title":"Default Title","offer_id":54639914778899,"sku":"WF03017","price":344.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/WF03016-Late-Ford-Dana-60-Weld-On-Front-Axle-Truss-1_26feb35b-24e4-4a31-9ad6-adb49a5b3986.jpg?v=1792013022"}],"url":"https:\/\/kohparts.com\/collections\/axle-trusses.oembed","provider":"KOHParts.com","version":"1.0","type":"link"}