{"title":"Axle Components","description":"\u003cp\u003eAxle Components includes axle shafts, differential parts, hubs, knuckles, seals, and related hardware, helping off-road owners repairing axles or planning stronger custom assemblies explore the relevant options. Begin with the axle model and the job at hand: restoring a leaking assembly, changing traction characteristics, or completing a new housing. Spline counts, bearing dimensions, gear ratios, and wheel-end configurations determine which pieces belong together. This category brings the main axle systems into view so you can follow the power path from the differential to the wheels and identify the supporting parts your installation requires. Explore the axle components listings to compare the details relevant to your vehicle and the work ahead.\u003c\/p\u003e","products":[{"product_id":"crane-axle-rear-unit-bearing-wilwood-lightweight-brake-kit","title":"Crane Axle Rear Unit Bearing Wilwood Lightweight Brake Kit - 4 Piston","description":"\u003cp\u003eThe \u003cstrong\u003eCrane Axle Rear Unit Bearing Wilwood 13.5\" Lightweight Brake Kit\u003c\/strong\u003e is a complete bolt-on braking system designed by \u003cstrong\u003eCrane Axle\u003c\/strong\u003e for use with the \u003ca href=\"\/products\/crane-axle-rear-unit-bearing-adapter-cup-assembly-pair\"\u003eCrane Axle Rear Unit Bearing Adapter Cup Assembly\u003c\/a\u003e (CA01033). The system combines Wilwood four-piston calipers, 13.5-inch vented rotors, machined aluminum rotor hats, and dedicated rear caliper brackets into one matched package.\u003c\/p\u003e\n\u003cp\u003eBuilt for demanding off-road applications, this kit reduces unsprung and rotating weight while providing the braking leverage, heat management, and serviceability needed for race vehicles, rock crawlers, trail rigs, and custom axle builds. Every component is selected to work together with the Crane Axle rear unit bearing adapter system.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eNote: \u003cmeta charset=\"utf-8\"\u003eFor Off-Road Use Only\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003eIncludes:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Wilwood Forged Dynalite 4-Piston Calipers\u003c\/li\u003e\n\u003cli\u003e(1) Set of Wilwood Brake Pads\u003c\/li\u003e\n\u003cli\u003e(2) 13.5\" Wilwood Vented Rotors\u003c\/li\u003e\n\u003cli\u003e(2) Crane Axle Machined Aluminum Brake Hats\u003c\/li\u003e\n\u003cli\u003e(2) Crane Axle Bolt-On Rear Brake Brackets\u003c\/li\u003e\n\u003cli\u003eInstallation Hardware\u003c\/li\u003e\n\u003cli\u003eSafety-Wire Ready Rotor Bolts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eCrane Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eRear Unit Bearing Brake Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCalipers\u003c\/td\u003e\n\u003ctd\u003eWilwood Forged Dynalite 4-Piston\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Piston Area\u003c\/td\u003e\n\u003ctd\u003e4.80 sq. in. Per Caliper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotor Diameter\u003c\/td\u003e\n\u003ctd\u003e13.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotor Type\u003c\/td\u003e\n\u003ctd\u003eVented\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotor Weight\u003c\/td\u003e\n\u003ctd\u003e13.4 lbs Each\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCaliper Weight\u003c\/td\u003e\n\u003ctd\u003e3.4 lbs Each\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotor Hat Material\u003c\/td\u003e\n\u003ctd\u003eMachined 6061 Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCaliper Bracket Material\u003c\/td\u003e\n\u003ctd\u003eLaser-Cut 3\/8\" Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWheel Bolt Patterns\u003c\/td\u003e\n\u003ctd\u003e8 on 6.5\" and 8 on 170mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eBolt-On\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotor Hardware\u003c\/td\u003e\n\u003ctd\u003eSafety-Wire Ready Bolts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eComponent\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRequired Adapter Assembly\u003c\/td\u003e\n\u003ctd\u003e\n\u003ca href=\"\/products\/crane-axle-rear-unit-bearing-adapter-cup-assembly-pair\"\u003eCrane Axle Rear Unit Bearing Adapter Cup Assembly\u003c\/a\u003e (CA01033)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnit Bearing Application\u003c\/td\u003e\n\u003ctd\u003e2005+ Super Duty Unit Bearing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Position\u003c\/td\u003e\n\u003ctd\u003eRear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWheel Bolt Patterns\u003c\/td\u003e\n\u003ctd\u003e8 on 6.5\" and 8 on 170mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWheel Compatibility\u003c\/td\u003e\n\u003ctd\u003eCompatible with Double Beadlock Wheels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdditional Compatibility\u003c\/td\u003e\n\u003ctd\u003eMagnum Knuckle Unit Bearing Adapter Applications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned specifically to bolt to the Crane Axle Rear Unit Bearing Adapter Cup Assembly, part number CA01033.\u003c\/li\u003e\n\u003cli\u003eIntended for rear axle applications using 2005+ Super Duty unit bearings.\u003c\/li\u003e\n\u003cli\u003eSupports 8 on 6.5\" and 8 on 170mm wheel bolt patterns when used with compatible hubs and wheels.\u003c\/li\u003e\n\u003cli\u003eVerify wheel diameter, barrel clearance, backspacing, rotor offset, and brake hose routing before installation.\u003c\/li\u003e\n\u003cli\u003eThe required rear unit bearing adapter cup assembly is not listed as included with this brake kit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ch3\u003e1. What axle assembly is this brake kit designed to fit?\u003c\/h3\u003e\n\u003cp\u003eThis kit is designed specifically for the Crane Axle Rear Unit Bearing Adapter Cup Assembly, part number CA01033, in rear axle applications using 2005-and-newer Super Duty unit bearings.\u003c\/p\u003e\n\u003ch3\u003e2. Why use Wilwood four-piston calipers?\u003c\/h3\u003e\n\u003cp\u003eThe forged four-piston calipers apply clamping force from both sides of the rotor. Their 4.80-square-inch total piston area provides strong, balanced braking with consistent modulation during demanding off-road use.\u003c\/p\u003e\n\u003ch3\u003e3. What advantage do the 13.5-inch vented rotors provide?\u003c\/h3\u003e\n\u003cp\u003eThe larger rotor diameter increases braking leverage at the wheel, while the vented construction helps manage heat during repeated braking. This allows the system to generate greater stopping torque with controlled pedal effort.\u003c\/p\u003e\n\u003ch3\u003e4. How does the lightweight design affect vehicle performance?\u003c\/h3\u003e\n\u003cp\u003eReducing rotor, caliper, and hat weight lowers unsprung and rotating mass. This can help the suspension respond more quickly to terrain changes while reducing the amount of mass that must be accelerated and slowed.\u003c\/p\u003e\n\u003ch3\u003e5. What should be verified before installation?\u003c\/h3\u003e\n\u003cp\u003eConfirm that the axle uses the correct Crane Axle adapter assembly and compatible Super Duty unit bearings. Wheel clearance, bolt pattern, rotor offset, brake hose routing, caliper orientation, and bleeder position should also be checked before final assembly.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e","brand":"Crane Axle","offers":[{"title":"Default Title","offer_id":54639584510227,"sku":"CA01040N","price":1335.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/CA01040N-Crane-Rear-UB-Wilwood-Brake-Kit-1.jpg?v=1788281400"},{"product_id":"gm-rear-3-4-ton-disc-brake-kit","title":"Crane Axle GM 14-Bolt Rear Disc Brake Conversion Kit – 3\/4-Ton","description":"\u003cp\u003eThe \u003cstrong\u003eGM 14-Bolt Rear Disc Brake Conversion Kit - 3\/4-Ton \u003c\/strong\u003e replaces the factory drum brakes on GM 14-Bolt full-float rear axles with a lighter, more efficient 3\/4-ton disc brake system. Designed by \u003cstrong\u003eCrane Axle\u003c\/strong\u003e, this complete conversion delivers improved stopping power, faster heat dissipation, easier maintenance, and reduced unsprung weight for off-road and heavy-duty applications.\u003c\/p\u003e\n\u003cp\u003eBuilt around weld-on 3\/8-inch steel caliper brackets with integrated gussets, this kit is designed for 3.50-inch axle tubes and utilizes common GM 3\/4-ton rotors and calipers. The result is a durable, serviceable braking system ideal for rock crawlers, rock bouncers, Ultra4 race cars, tow rigs, and custom axle builds.\u003c\/p\u003e\n\u003ch4\u003eIncludes:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Weld-On 3\/8\" Steel Caliper Brackets with Integrated Gussets\u003c\/li\u003e\n\u003cli\u003e(2) GM 3\/4-Ton Brake Calipers\u003c\/li\u003e\n\u003cli\u003e(2) GM 3\/4-Ton Brake Rotors\u003c\/li\u003e\n\u003cli\u003e(1) Set of Brake Pads\u003c\/li\u003e\n\u003cli\u003e(16) 9\/16\"-18 Wheel Studs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eCrane Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eGM Rear Disc Brake Conversion Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Compatibility\u003c\/td\u003e\n\u003ctd\u003eGM 14-Bolt Full-Float Rear Axles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Tube Diameter\u003c\/td\u003e\n\u003ctd\u003e3.50\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBracket Material\u003c\/td\u003e\n\u003ctd\u003e3\/8\" High-Strength Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBracket Style\u003c\/td\u003e\n\u003ctd\u003eWeld-On with Integrated Gussets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotor Type\u003c\/td\u003e\n\u003ctd\u003eGM 3\/4-Ton Disc Rotor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCaliper Type\u003c\/td\u003e\n\u003ctd\u003eGM 3\/4-Ton Disc Brake Caliper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWheel Stud Size\u003c\/td\u003e\n\u003ctd\u003e9\/16\"-18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWheel Compatibility\u003c\/td\u003e\n\u003ctd\u003eFits Most 15\" Steel Wheels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eWeld-On Conversion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003cth\u003eAxle Application\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eC2500\u003c\/td\u003e\n\u003ctd\u003e1973–2000\u003c\/td\u003e\n\u003ctd\u003eGM 14-Bolt Full-Float Rear Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eK2500\u003c\/td\u003e\n\u003ctd\u003e1973–2000\u003c\/td\u003e\n\u003ctd\u003eGM 14-Bolt Full-Float Rear Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eC3500\u003c\/td\u003e\n\u003ctd\u003e1973–2000\u003c\/td\u003e\n\u003ctd\u003eGM 14-Bolt Full-Float Rear Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eK3500\u003c\/td\u003e\n\u003ctd\u003e1973–2000\u003c\/td\u003e\n\u003ctd\u003eGM 14-Bolt Full-Float Rear Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eC2500\u003c\/td\u003e\n\u003ctd\u003e1973–2000\u003c\/td\u003e\n\u003ctd\u003eGM 14-Bolt Full-Float Rear Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eK2500\u003c\/td\u003e\n\u003ctd\u003e1973–2000\u003c\/td\u003e\n\u003ctd\u003eGM 14-Bolt Full-Float Rear Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eC3500\u003c\/td\u003e\n\u003ctd\u003e1973–2000\u003c\/td\u003e\n\u003ctd\u003eGM 14-Bolt Full-Float Rear Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eK3500\u003c\/td\u003e\n\u003ctd\u003e1973–2000\u003c\/td\u003e\n\u003ctd\u003eGM 14-Bolt Full-Float Rear Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for GM 14-Bolt full-float rear axle housings.\u003c\/li\u003e\n\u003cli\u003eFits axle housings with 3.50\" outside diameter axle tubes.\u003c\/li\u003e\n\u003cli\u003eUses common GM 3\/4-ton brake rotors and calipers for simplified future service.\u003c\/li\u003e\n\u003cli\u003eCompatible with most 15-inch steel wheels. Verify wheel and caliper clearance before installation.\u003c\/li\u003e\n\u003cli\u003eSuitable for off-road vehicles, rock crawlers, rock bouncers, Ultra4 race cars, and custom fabricated axle applications.\u003c\/li\u003e\n\u003cli\u003eProfessional welding and proper bracket alignment are required during installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ch3\u003e1. Why convert a GM 14-Bolt from drum brakes to disc brakes?\u003c\/h3\u003e\n\u003cp\u003eDisc brakes dissipate heat much more efficiently than drum brakes, providing more consistent braking performance, improved pedal feel, and better resistance to brake fade during heavy towing and aggressive off-road use.\u003c\/p\u003e\n\u003ch3\u003e2. How does removing the factory drum brakes improve suspension performance?\u003c\/h3\u003e\n\u003cp\u003eFactory drum assemblies are significantly heavier than comparable disc brake components. Reducing unsprung weight allows the suspension and shocks to react more quickly to terrain changes, improving ride quality and tire control.\u003c\/p\u003e\n\u003ch3\u003e3. Why are the caliper brackets made from 3\/8-inch steel with integrated gussets?\u003c\/h3\u003e\n\u003cp\u003eThe heavy-duty laser-cut brackets provide a rigid mounting surface for the calipers, while the welded gussets help resist flex during repeated high-load braking. Accurate bracket alignment also promotes even brake pad wear.\u003c\/p\u003e\n\u003ch3\u003e4. Why use common GM 3\/4-ton brake components?\u003c\/h3\u003e\n\u003cp\u003eGM 3\/4-ton rotors and calipers are widely available and easy to source, making future maintenance and replacement straightforward whether the vehicle is used on the trail or driven long distances to events.\u003c\/p\u003e\n\u003ch3\u003e5. What should be verified before welding the brackets to the axle housing?\u003c\/h3\u003e\n\u003cp\u003eConfirm axle tube diameter, rotor position, caliper alignment, wheel clearance, parking brake requirements, and brake hose routing before final welding. Proper fixture alignment ensures correct caliper positioning and long-term braking performance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e","brand":"Crane Axle","offers":[{"title":"Default Title","offer_id":54639584542995,"sku":"WA01033","price":489.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/WA01033-GM-Rear-3_4-Ton-Disc-Brake-Kit-1_46ad9a08-dcf3-46a3-9a35-2116c1c0b8f1.jpg?v=1788281364"},{"product_id":"dana-60-front-end-kit","title":"Crane Axle Dana 60 Front End Kit for GM 6-Bolt Knuckles","description":"\u003cp\u003eThe \u003cstrong\u003eCrane Axle Dana 60 \u003cmeta charset=\"utf-8\"\u003eFront Axle Outer Assembly Kit for GM 6-Bolt Knuckles\u003c\/strong\u003e includes the major components needed to complete both outer ends of a Dana 60 front axle using GM or Chevrolet six-bolt spindle-mount knuckles. This package combines the spindles, hubs, brake components, bearings, seals, and installation hardware needed to finish a new axle build or rebuild a worn outer assembly.\u003c\/p\u003e\n\u003cp\u003eUsing a matched front-end package eliminates the need to source individual components from multiple suppliers and helps simplify spindle, hub, bearing, and brake assembly. This kit is built for custom Dana 60 axles, heavy trail rigs, rock crawlers, and other off-road applications that require a complete and serviceable GM-pattern outer assembly.\u003c\/p\u003e\n\u003ch4\u003eIncludes:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Spindles with Nuts and Washers\u003c\/li\u003e\n\u003cli\u003e(2) Brake Brackets\u003c\/li\u003e\n\u003cli\u003e(2) Wheel Hubs\u003c\/li\u003e\n\u003cli\u003e(2) Brake Rotors\u003c\/li\u003e\n\u003cli\u003e(2) Brake Calipers\u003c\/li\u003e\n\u003cli\u003e(1) Set of Brake Pads\u003c\/li\u003e\n\u003cli\u003e(2) Bearing and Seal Kits\u003c\/li\u003e\n\u003cli\u003e(16) Wheel Studs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eCrane Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eComplete Front Axle Outer Assembly Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Compatibility\u003c\/td\u003e\n\u003ctd\u003eDana 60 Front Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKnuckle Pattern\u003c\/td\u003e\n\u003ctd\u003eGM \/ Chevrolet 6-Bolt Spindle Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindles Included\u003c\/td\u003e\n\u003ctd\u003eYes, with Nuts and Washers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWheel Hubs Included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrake Components Included\u003c\/td\u003e\n\u003ctd\u003eBrackets, Rotors, Calipers, Bearings, Seals, Studs and Pads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBearings and Seals Included\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWheel Studs Included\u003c\/td\u003e\n\u003ctd\u003e(16)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Position\u003c\/td\u003e\n\u003ctd\u003eFront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eComponent\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle\u003c\/td\u003e\n\u003ctd\u003eDana 60 Front Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKnuckle Type\u003c\/td\u003e\n\u003ctd\u003eGM \/ Chevrolet Pattern\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle Mounting Pattern\u003c\/td\u003e\n\u003ctd\u003e6-Bolt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eNew Axle Builds and Complete Outer-End Rebuilds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFits GM and Chevrolet Dana 60 knuckles with a six-bolt spindle mounting pattern.\u003c\/li\u003e\n\u003cli\u003eVerify the knuckle mounting pattern before ordering because Dana 60 knuckles were produced in multiple configurations.\u003c\/li\u003e\n\u003cli\u003eAxle shafts, locking hubs or drive flanges, steering arms, and knuckles are not listed as included.\u003c\/li\u003e\n\u003cli\u003eConfirm wheel bolt pattern, wheel clearance, brake hose requirements, and outer axle shaft compatibility during assembly.\u003c\/li\u003e\n\u003cli\u003eProper wheel bearing preload and brake system bleeding are required during installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ch3\u003e1. What does this Dana 60 front end kit complete?\u003c\/h3\u003e\n\u003cp\u003eThe kit supplies the spindle, hub, rotor, caliper, brake bracket, pad, bearing, seal, and wheel-stud components needed to assemble both outer ends of a compatible Dana 60 front axle.\u003c\/p\u003e\n\u003ch3\u003e2. What does the GM 6-bolt knuckle pattern refer to?\u003c\/h3\u003e\n\u003cp\u003eIt refers to the six fasteners used to secure the spindle and brake bracket assembly to the steering knuckle. The knuckle must use the correct GM or Chevrolet six-bolt mounting pattern for the components to fit.\u003c\/p\u003e\n\u003ch3\u003e3. Is this kit useful for a new custom Dana 60 build?\u003c\/h3\u003e\n\u003cp\u003eYes. It allows a builder to complete both axle ends with a coordinated group of components instead of sourcing the spindles, hubs, brakes, bearings, and hardware individually.\u003c\/p\u003e\n\u003ch3\u003e4. Why is wheel bearing preload important?\u003c\/h3\u003e\n\u003cp\u003eCorrect preload keeps the hub properly supported without excessive looseness or bearing drag. Incorrect adjustment can cause wheel movement, seal failure, brake rotor misalignment, overheating, or premature bearing wear.\u003c\/p\u003e\n\u003ch3\u003e5. What parts may still be needed to finish the axle?\u003c\/h3\u003e\n\u003cp\u003eDepending on the build, additional components may include steering knuckles, inner and outer axle shafts, U-joints, locking hubs or drive flanges, steering arms, brake hoses, and steering linkage.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e","brand":"Wide Open Design","offers":[{"title":"Default Title","offer_id":54639584575763,"sku":"WA01026","price":1799.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/WA01026-Crane-Axle-GM-Dana-60-Front-Axle-Kit-1_ea62b8e3-223f-49f0-99f9-dd58e25b90a4.jpg?v=1788281431"},{"product_id":"crane-axle-front-unit-bearing-wilwood-light-weight-brake-kit-6-piston","title":"Crane Axle Front Unit Bearing Wilwood 6 Piston Lightweight Brake Kit","description":"\u003cp\u003eThe \u003cstrong\u003eCrane Axle Front Unit Bearing Wilwood 6-Piston Lightweight Brake Kit\u003c\/strong\u003e is designed for high-performance off-road and fabricated chassis applications using 2005+ Ford Super Duty unit bearings. Built around Wilwood forged billet 6-piston calipers and large-diameter 13.5\" vented rotors, this system drastically improves stopping power while reducing unsprung weight and rotating mass compared to heavier OEM-style cast brake assemblies.\u003c\/p\u003e\n\u003cp\u003eEngineered specifically for Crane Axle Magnum Knuckle and Super Duty unit bearing adapter systems, this bolt-on package combines lightweight 6061-T6 aluminum rotor hats with precision laser-cut caliper brackets for accurate alignment and improved serviceability. The reduction in rotating mass improves suspension response and steering feel, while the 6-piston clamping force delivers the severe-duty braking torque needed for large tires, high-horsepower drivetrains, and aggressive competition off-road use.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eNote: \u003cmeta charset=\"utf-8\"\u003eFor Off-Road Use Only\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003eIncludes:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Wilwood 6-Piston Forged Billet Calipers with Brake Pads\u003c\/li\u003e\n\u003cli\u003e(2) Wilwood 13.5\" Vented Rotors\u003c\/li\u003e\n\u003cli\u003e(2) Crane Axle Machined 6061-T6 Aluminum Rotor Hats\u003c\/li\u003e\n\u003cli\u003e(2) Crane Axle Bolt-On Front Brake Brackets\u003c\/li\u003e\n\u003cli\u003eSafety Wire Ready Rotor Bolts\u003c\/li\u003e\n\u003cli\u003eAll Required Installation Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e \u003cspan class=\"svg-wrapper icon-plus\"\u003e \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n        \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n      \u003c\/svg\u003e \u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCaliper Type\u003c\/td\u003e\n\u003ctd\u003eWilwood Forged Billet 6-Piston\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCaliper Material\u003c\/td\u003e\n\u003ctd\u003eForged Billet Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotor Diameter \u0026amp; Style\u003c\/td\u003e\n\u003ctd\u003e13.5\" Wilwood Vented Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotor Hat Construction\u003c\/td\u003e\n\u003ctd\u003ePrecision-Machined 6061-T6 Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrake Bracket Material\u003c\/td\u003e\n\u003ctd\u003eLaser-Cut High-Strength Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWheel Bolt Pattern Compatibility\u003c\/td\u003e\n\u003ctd\u003eFits 8 on 6.5\" \u0026amp; 8 on 170mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardware Feature\u003c\/td\u003e\n\u003ctd\u003eSafety-Wire Ready Rotor Bolts Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication Design\u003c\/td\u003e\n\u003ctd\u003eBolt-On for 2005+ Ford Super Duty Unit Bearings \u0026amp; Crane Adapters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eManufactured in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e \u003cspan class=\"svg-wrapper icon-plus\"\u003e \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n        \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n      \u003c\/svg\u003e \u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003cp\u003eDesigned for custom off-road steering front axles utilizing \u003cstrong\u003e2005+ Ford Super Duty unit bearings\u003c\/strong\u003e paired with Crane Axle adapters.\u003c\/p\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003cth\u003eAxle Application\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-250 Super Duty (Unit Bearing Donor)\u003c\/td\u003e\n\u003ctd\u003e2005+\u003c\/td\u003e\n\u003ctd\u003eFront Unit Bearing Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-350 Super Duty (Unit Bearing Donor)\u003c\/td\u003e\n\u003ctd\u003e2005+\u003c\/td\u003e\n\u003ctd\u003eFront Unit Bearing Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCustom Steer Axle\u003c\/td\u003e\n\u003ctd\u003eCrane Magnum Knuckle Applications\u003c\/td\u003e\n\u003ctd\u003eCustom Build\u003c\/td\u003e\n\u003ctd\u003eFront Unit Bearing Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCustom Steer Axle\u003c\/td\u003e\n\u003ctd\u003eTube Chassis \u0026amp; Custom Buggy Builds\u003c\/td\u003e\n\u003ctd\u003eCustom Build\u003c\/td\u003e\n\u003ctd\u003eFront Unit Bearing Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned specifically to bolt onto Crane Axle Magnum Knuckle systems and Crane Axle 2005+ Super Duty unit bearing adapters.\u003c\/li\u003e\n\u003cli\u003eDual-drilled rotor hats are compatible with both standard off-road \u003cstrong\u003e8x6.5\"\u003c\/strong\u003e and modern Super Duty \u003cstrong\u003e8x170mm\u003c\/strong\u003e wheel bolt patterns.\u003c\/li\u003e\n\u003cli\u003eIntended for high-performance off-road, rock racing, and fabricated chassis applications.\u003c\/li\u003e\n\u003cli\u003eAlways verify wheel backspacing, beadlock inner barrel clearance, and caliper profile dimensions prior to final assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e \u003cspan class=\"svg-wrapper icon-plus\"\u003e \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n        \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n      \u003c\/svg\u003e \u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ch3\u003e1. What is the performance advantage of a 6-piston caliper over a 4-piston caliper?\u003c\/h3\u003e\n\u003cp\u003eA 6-piston caliper provides a larger total piston clamping area and distributes brake pressure across a longer, more aggressive brake pad pad track. This results in superior clamping torque, more even pad wear, and exceptional pedal modulation—making it the ideal upgrade for heavier Ultra4 cars, rock bouncers, and trail rigs running 40-inch and larger tires.\u003c\/p\u003e\n\u003ch3\u003e2. Why is reducing unsprung weight so important for off-road suspension performance?\u003c\/h3\u003e\n\u003cp\u003eUnsprung weight refers to any vehicle component not supported by the springs (such as axles, wheels, tires, and brakes). By replacing heavy OEM cast-iron rotors and sliding calipers with lightweight Wilwood billet aluminum calipers and 6061-T6 aluminum rotor hats, you drastically reduce rotating inertia and unsprung mass. This allows your shocks to cycle and control wheel movement much faster over whoops, rocks, and rough terrain.\u003c\/p\u003e\n\u003ch3\u003e3. Will this kit bolt directly onto a stock, unmodified Ford Super Duty truck?\u003c\/h3\u003e\n\u003cp\u003eNo. While this brake kit centers around 2005+ Ford Super Duty unit bearing geometry, it is engineered specifically as a lightweight performance upgrade for custom steering axles equipped with Crane Axle Magnum Knuckles and Crane Axle Unit Bearing Adapters on custom-built off-road chassis.\u003c\/p\u003e\n\u003ch3\u003e4. How do the 13.5\" vented rotors handle high-temperature brake fade?\u003c\/h3\u003e\n\u003cp\u003eThe 13.5-inch diameter increases mechanical braking leverage, requiring less pedal effort to generate stopping power. Combined with directional internal cooling vanes, the rotor dissipates severe heat buildup caused by repeated high-speed braking in desert endurance races or steep rock-crawling descents.\u003c\/p\u003e\n\u003ch3\u003e5. What wheel sizes and bolt patterns work with this 6-piston brake system?\u003c\/h3\u003e\n\u003cp\u003eThe machined aluminum rotor hats are dual-drilled to accommodate both \u003cstrong\u003e8 on 6.5\"\u003c\/strong\u003e and \u003cstrong\u003e8 on 170mm\u003c\/strong\u003e wheel bolt patterns. Due to the larger profile of the 6-piston billet calipers and 13.5\" rotors, we recommend running 17-inch or larger wheels and verifying inner barrel clearance when using double beadlock wheels.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e","brand":"Crane Axle","offers":[{"title":"Default Title","offer_id":54639584608531,"sku":"CA01039N6P","price":1699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/CA01039N6P-Crane-Front-Bearing-Brake-Kit-6-Piston-1_dafb1f42-a300-4d72-8799-8b28704b90e0.jpg?v=1788281391"},{"product_id":"crane-gm-front-wilwood-brake-kit","title":"Crane Axle Wilwood GM Dana 60 8 x 6.5\" Front Brake Kit - 4-Piston","description":"\u003cp\u003eThe \u003cstrong\u003eCrane Axle Lightweight Wilwood GM Dana 60 Front Brake Kit - 4-Piston\u003c\/strong\u003e is a lightweight, high-performance disc brake package designed for GM Dana 60 front axles and compatible axles using GM-pattern kingpin knuckles with OE-style 8-lug wheel hubs. Built around Wilwood 4-piston calipers and 13.5\" rotors, this system replaces heavy factory-style brakes with a performance-focused package for rock crawlers, Ultra4 cars, trail rigs, and custom off-road builds.\u003c\/p\u003e\n\u003cp\u003eReducing weight at the wheel end allows the suspension to react more effectively while reducing the rotating mass the brakes and drivetrain have to control. This package saves approximately 36.5 lbs compared with a typical 3\/4-ton brake conversion while providing the braking leverage, modulation, and heat capacity needed for large tires and demanding off-road use.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eNote: \u003cmeta charset=\"utf-8\"\u003eFor Off-Road Use Only\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003eIncludes:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e(2) GM Dana 60 Bolt-On Caliper Brackets\u003c\/li\u003e\n\u003cli\u003e(2) Wilwood 4-Piston Calipers\u003c\/li\u003e\n\u003cli\u003e(2) 13.5\" Wilwood Rotors\u003c\/li\u003e\n\u003cli\u003e(2) Crane Axle Brake Hats\u003c\/li\u003e\n\u003cli\u003e(1) Set of Brake Pads\u003c\/li\u003e\n\u003cli\u003eCaliper Mounting Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eCrane Axle \/ Wilwood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eLightweight Front Disc Brake Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Position\u003c\/td\u003e\n\u003ctd\u003eFront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Axle Application\u003c\/td\u003e\n\u003ctd\u003eGM Dana 60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKnuckle Pattern\u003c\/td\u003e\n\u003ctd\u003eGM-Pattern Kingpin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHub Style\u003c\/td\u003e\n\u003ctd\u003eOE-Style 8-Lug\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCalipers\u003c\/td\u003e\n\u003ctd\u003eWilwood 4-Piston\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotor Diameter\u003c\/td\u003e\n\u003ctd\u003e13.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotor Style\u003c\/td\u003e\n\u003ctd\u003eVented\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCaliper Brackets\u003c\/td\u003e\n\u003ctd\u003eLaser-Cut 3\/8\" High-Strength Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCaliper Bracket Installation\u003c\/td\u003e\n\u003ctd\u003eBolt-On\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApproximate Weight Savings\u003c\/td\u003e\n\u003ctd\u003e36.5 lbs Compared with Typical 3\/4-Ton Brake Conversion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Wheel Diameter\u003c\/td\u003e\n\u003ctd\u003e17\"+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Application\u003c\/td\u003e\n\u003ctd\u003ePerformance \u0026amp; Competition Off-Road\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned For:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGM Dana 60 front axles\u003c\/li\u003e\n\u003cli\u003eGM-pattern kingpin steering knuckles\u003c\/li\u003e\n\u003cli\u003eOE-style 8-lug wheel hubs\u003c\/li\u003e\n\u003cli\u003eCrane Axle GM-pattern kingpin knuckles\u003c\/li\u003e\n\u003cli\u003eOEM GM Dana 60 kingpin knuckles\u003c\/li\u003e\n\u003cli\u003eCompatible aftermarket GM-pattern kingpin knuckles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCommon Applications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRock crawlers\u003c\/li\u003e\n\u003cli\u003eRock bouncers\u003c\/li\u003e\n\u003cli\u003eUltra4 race cars\u003c\/li\u003e\n\u003cli\u003eTrail rigs\u003c\/li\u003e\n\u003cli\u003eCustom steering axles\u003c\/li\u003e\n\u003cli\u003ePerformance off-road builds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned around GM-pattern kingpin knuckles using OE-style 8-lug wheel hubs.\u003c\/li\u003e\n\u003cli\u003eCompatible with Crane Axle and OEM GM Dana 60 kingpin knuckles.\u003c\/li\u003e\n\u003cli\u003eCompatible with many aftermarket GM-pattern kingpin knuckles, including Reid Racing and Solid Axle Industries.\u003c\/li\u003e\n\u003cli\u003eUses bolt-on caliper brackets; welding is not required for bracket installation.\u003c\/li\u003e\n\u003cli\u003eRequires 17\" or larger wheels for rotor and caliper clearance.\u003c\/li\u003e\n\u003cli\u003eActual clearance varies based on wheel design and backspacing.\u003c\/li\u003e\n\u003cli\u003eVerify knuckle, hub, brake hat, rotor, wheel, steering, and suspension clearance before installation.\u003c\/li\u003e\n\u003cli\u003eVerify master cylinder sizing and front-to-rear brake balance as part of the complete braking system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ch3\u003eWhat axles does this Wilwood brake kit fit?\u003c\/h3\u003e\n\u003cp\u003eThis kit is designed primarily for GM Dana 60 front axles using GM-pattern kingpin steering knuckles and OE-style 8-lug wheel hubs. It can also be used with compatible custom axle assemblies built around the same GM-pattern kingpin wheel-end configuration.\u003c\/p\u003e\n\u003ch3\u003eHow much weight does this brake kit save?\u003c\/h3\u003e\n\u003cp\u003eThe package saves approximately 36.5 lbs compared with a typical 3\/4-ton brake conversion. Reducing weight at the wheel end helps decrease unsprung and rotating mass, allowing the suspension to react more effectively over rough terrain.\u003c\/p\u003e\n\u003ch3\u003eWhy use Wilwood 4-piston calipers?\u003c\/h3\u003e\n\u003cp\u003eThe Wilwood 4-piston fixed calipers provide consistent clamping force and predictable brake modulation in a compact, lightweight package. This makes them well suited to technical crawling, high-speed off-road driving, and vehicles running large tires.\u003c\/p\u003e\n\u003ch3\u003eWhat size wheels are required?\u003c\/h3\u003e\n\u003cp\u003eA 17\" or larger wheel is required for clearance around the 13.5\" rotor and Wilwood caliper. Actual clearance depends on wheel barrel design and backspacing, so the complete brake and wheel combination should be checked before final assembly.\u003c\/p\u003e\n\u003ch3\u003eDoes this brake kit require welding?\u003c\/h3\u003e\n\u003cp\u003eNo. Unlike Crane Axle weld-on rear brake packages, this front brake kit uses bolt-on caliper brackets designed around compatible GM-pattern kingpin knuckles.\u003c\/p\u003e\n\u003ch3\u003eWill this fit aftermarket Dana 60 kingpin knuckles?\u003c\/h3\u003e\n\u003cp\u003eIt is compatible with Crane Axle GM-pattern kingpin knuckles, OEM GM Dana 60 kingpin knuckles, and many aftermarket GM-pattern replacements including Reid Racing and Solid Axle Industries. Verify the specific knuckle and hub configuration before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e","brand":"Crane Axle","offers":[{"title":"Default Title","offer_id":54639584641299,"sku":"CA01051F","price":1559.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/CA01051F-Crane-GM-Front-Wilwood-Brake-Kit-1_143a0db1-a01a-424f-ac53-5b1f06642e7e.jpg?v=1788281385"},{"product_id":"crane-gm-wilwood-brake-kit-6-piston","title":"Crane Axle Wilwood GM Dana 60 8 x 6.5\" Front Brake Kit - 6-Piston","description":"\u003cp\u003eThe \u003cstrong\u003eCrane Axle Wilwood 13.5\" Front Brake Kit for GM Dana 60 Kingpin Axles\u003c\/strong\u003e is designed to replace the heavy factory one-ton front brake system with a lightweight, high-performance package built around \u003cstrong\u003eWilwood\u003c\/strong\u003e six-piston calipers. Engineered for rock crawlers, Ultra4 race cars, prerunners, trail rigs, and heavy-duty street trucks, this bolt-on system delivers increased braking performance while reducing unsprung weight.\u003c\/p\u003e\n\u003cp\u003eFeaturing 13.5-inch vented rotors, forged six-piston calipers, machined 6061 aluminum brake hats, and laser-cut steel caliper brackets, this kit provides the stopping power needed for oversized tires and aggressive driving. The lightweight rotating assembly helps improve suspension response while maintaining compatibility with GM Dana 60 kingpin front axles using OEM-style 8-lug wheel hubs.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eNote: \u003cmeta charset=\"utf-8\"\u003eFor Off-Road Use Only\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003eIncludes:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Bolt-On Caliper Brackets\u003c\/li\u003e\n\u003cli\u003e(2) Wilwood Forged Dynalite 6-Piston Calipers\u003c\/li\u003e\n\u003cli\u003e(2) 13.5\" Vented Wilwood Rotors\u003c\/li\u003e\n\u003cli\u003e(2) Crane Axle 6061 Aluminum Brake Hats\u003c\/li\u003e\n\u003cli\u003e(1) Set of Brake Pads\u003c\/li\u003e\n\u003cli\u003eComplete Installation Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e \u003cspan class=\"svg-wrapper icon-plus\"\u003e \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n        \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n      \u003c\/svg\u003e \u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eCrane Axle \/ Wilwood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eFront Disc Brake Conversion Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCalipers\u003c\/td\u003e\n\u003ctd\u003eWilwood Forged Dynalite 6-Piston\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotor Diameter\u003c\/td\u003e\n\u003ctd\u003e13.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotor Style\u003c\/td\u003e\n\u003ctd\u003eVented\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrake Hat Material\u003c\/td\u003e\n\u003ctd\u003eMachined 6061 Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCaliper Brackets\u003c\/td\u003e\n\u003ctd\u003eLaser-Cut 3\/8\" Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWheel Bolt Patterns\u003c\/td\u003e\n\u003ctd\u003e8 on 6.5\" and 8 on 170mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePiston Area (Per Caliper)\u003c\/td\u003e\n\u003ctd\u003e4.80 sq. in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotor Hardware\u003c\/td\u003e\n\u003ctd\u003eSafety-Wire Ready Bolts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eBolt-On\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e \u003cspan class=\"svg-wrapper icon-plus\"\u003e \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n        \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n      \u003c\/svg\u003e \u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003cp\u003eDesigned for GM Dana 60 kingpin front axles equipped with OEM-style 8-lug wheel hubs.\u003c\/p\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eAxle Application\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1979–1987\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eK30\u003c\/td\u003e\n\u003ctd\u003eGM Dana 60 Kingpin Front Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1988–1991\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eK30 Crew Cab\u003c\/td\u003e\n\u003ctd\u003eGM Dana 60 Kingpin Front Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFits Crane Axle GM Dana 60 Kingpin Knuckles.\u003c\/li\u003e\n\u003cli\u003eCompatible with OEM GM Dana 60 kingpin knuckles.\u003c\/li\u003e\n\u003cli\u003eCompatible with many aftermarket kingpin knuckles, including Solid Axle and Reid Racing.\u003c\/li\u003e\n\u003cli\u003eDesigned for axles using OEM-style 8-lug wheel hubs.\u003c\/li\u003e\n\u003cli\u003eVerify wheel diameter, wheel backspacing, hub configuration, and knuckle compatibility before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eTech Insight\u003c\/strong\u003e \u003cspan class=\"svg-wrapper icon-plus\"\u003e \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n        \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n      \u003c\/svg\u003e \u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ch3\u003e1. Why upgrade to a six-piston brake system?\u003c\/h3\u003e\n\u003cp\u003eSix-piston calipers distribute clamping force more evenly across the brake pads, improving pedal feel, braking consistency, and heat management during repeated hard stops on heavy off-road vehicles.\u003c\/p\u003e\n\u003ch3\u003e2. What are the advantages of 13.5-inch rotors?\u003c\/h3\u003e\n\u003cp\u003eA larger rotor increases braking leverage, allowing more stopping torque for the same pedal effort. The vented design also helps dissipate heat during prolonged braking on the trail or at race speeds.\u003c\/p\u003e\n\u003ch3\u003e3. Why are aluminum brake hats used?\u003c\/h3\u003e\n\u003cp\u003eMachined 6061 aluminum hats reduce rotating and unsprung weight compared to traditional one-piece rotors. Lower unsprung weight helps the suspension react more quickly to uneven terrain while improving steering response.\u003c\/p\u003e\n\u003ch3\u003e4. Will this kit clear every wheel?\u003c\/h3\u003e\n\u003cp\u003eNo. Six-piston calipers and 13.5-inch rotors require adequate wheel diameter and inside barrel clearance. Always verify wheel size, backspacing, and caliper clearance before installation.\u003c\/p\u003e\n\u003ch3\u003e5. Is this a complete bolt-on conversion?\u003c\/h3\u003e\n\u003cp\u003eYes. This kit is designed as a bolt-on upgrade for compatible GM Dana 60 kingpin front axles using OEM-style 8-lug hubs and compatible kingpin knuckles. Always inspect wheel bearings, hubs, brake hoses, and master cylinder compatibility during installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e","brand":"Crane Axle","offers":[{"title":"Default Title","offer_id":54639584674067,"sku":"CA01051F-6","price":1769.61,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/CA01051F-6-Crane-GM-Wilwood-Brake-Kit-6-Piston-1_2e38b1ba-db7c-4d37-a32f-c3aa223871c3.jpg?v=1789499718"},{"product_id":"crane-axle-front-unit-bearing-wilwood-lightweight-brake-kit","title":"Crane Axle Front Super Duty Unit Bearing Lightweight Brake Kit – Wilwood 4-Piston","description":"\u003cp\u003eThe \u003cstrong\u003eCrane Axle Front Super Duty Unit Bearing Lightweight Brake Kit\u003c\/strong\u003e is engineered for serious off-road performance, precision stopping power, and reduced unsprung weight. Every component in this system is handpicked to deliver reliable braking torque while minimizing rotating mass on your \u003ca title=\"Magnum Knuckle Unit Bearing Adapter\" href=\"\/products\/crane-axle-magnum-knuckle-aluminum-unit-bearing-adapter-pair\"\u003e\u003cstrong\u003eMagnum Knuckle Unit Bearing\u003c\/strong\u003e\u003c\/a\u003e axle setup.\u003c\/p\u003e\n\u003cp\u003eWith larger 13.5\" Wilwood vented rotors, forged 4-piston calipers, and Crane’s precision-machined 6061 aluminum rotor hats, this kit provides a major increase in braking torque, improved pedal feel, and better shock response—allowing your suspension to work more efficiently and keeping your tires planted where they belong on the trail or race course.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003cmeta charset=\"utf-8\"\u003eFor Off-Road Use Only\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003eIncludes:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Wilwood Forged Dynalite 4-Piston Calipers \u0026amp; Brake Pads\u003c\/li\u003e\n\u003cli\u003e(2) Wilwood 13.5\" Vented Rotors\u003c\/li\u003e\n\u003cli\u003e(2) Crane Axle Machined 6061 Aluminum Brake Hats\u003c\/li\u003e\n\u003cli\u003e(2) Crane Axle Bolt-On Front Brake Brackets\u003c\/li\u003e\n\u003cli\u003eSafety Wire Ready Rotor Bolts\u003c\/li\u003e\n\u003cli\u003eAll Necessary Mounting Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatible Unit Bearing Adapter:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/crane-axle-magnum-knuckle-aluminum-unit-bearing-adapter-pair\"\u003eCrane Axle Magnum Knuckle Aluminum Unit Bearing Adapter Pair\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eCompatible Knuckle Kit:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca title=\"Crane Axle Magnum Knuckle Kit\" href=\"\/products\/crane-axle-magnum-knuckle-kit\"\u003eCrane Axle Magnum Knuckle Kit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e \u003cspan class=\"svg-wrapper icon-plus\"\u003e \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n        \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n      \u003c\/svg\u003e \u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCaliper Model\u003c\/td\u003e\n\u003ctd\u003eWilwood Forged Dynalite 4-Piston\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Piston Area\u003c\/td\u003e\n\u003ctd\u003e4.80 sq. in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCaliper Weight\u003c\/td\u003e\n\u003ctd\u003e3.4 lbs each\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotor Diameter \u0026amp; Type\u003c\/td\u003e\n\u003ctd\u003e13.5\" Wilwood Vented Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotor Weight\u003c\/td\u003e\n\u003ctd\u003e13.4 lbs each\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrake Hat Construction\u003c\/td\u003e\n\u003ctd\u003ePrecision-Machined 6061 Aluminum (Corrosion-Resistant Coating)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrake Bracket Material\u003c\/td\u003e\n\u003ctd\u003e3\/8\" Laser-Cut Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWheel Bolt Pattern Compatibility\u003c\/td\u003e\n\u003ctd\u003eFits 8 on 6.5\" \u0026amp; 8 on 170mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWheel Clearance\u003c\/td\u003e\n\u003ctd\u003eDesigned to clear most double beadlock wheels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication Design\u003c\/td\u003e\n\u003ctd\u003eBolt-On for Crane Magnum Knuckle Unit Bearing Adapter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e \u003cspan class=\"svg-wrapper icon-plus\"\u003e \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n        \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n      \u003c\/svg\u003e \u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003cp\u003eDesigned for custom off-road steering front axles utilizing \u003cstrong\u003e2005+ Ford Super Duty unit bearings\u003c\/strong\u003e paired with Crane Axle adapters.\u003c\/p\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003cth\u003eAxle Application\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-250 Super Duty (Unit Bearing Donor)\u003c\/td\u003e\n\u003ctd\u003e2005–Present\u003c\/td\u003e\n\u003ctd\u003eFord Super Duty Unit Bearing Front Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-350 Super Duty (Unit Bearing Donor)\u003c\/td\u003e\n\u003ctd\u003e2005–Present\u003c\/td\u003e\n\u003ctd\u003eFord Super Duty Unit Bearing Front Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-450 \/ F-550 Super Duty (Unit Bearing Donor)\u003c\/td\u003e\n\u003ctd\u003e2005–Present\u003c\/td\u003e\n\u003ctd\u003eFord Super Duty Unit Bearing Front Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCustom Steer Axle\u003c\/td\u003e\n\u003ctd\u003eCrane Magnum Knuckle Applications\u003c\/td\u003e\n\u003ctd\u003eCustom Build\u003c\/td\u003e\n\u003ctd\u003eRequires \u003ca title=\"Crane Axle Magnum Knuckle Unit Bearing Adapter\" href=\"\/products\/crane-axle-magnum-knuckle-aluminum-unit-bearing-adapter-pair\"\u003eCrane Axle Unit Bearing Adapter\u003c\/a\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned specifically to bolt onto the \u003ca title=\"Crane Axle Magnum Knuckle Unit Bearing Adapter\" href=\"\/products\/crane-axle-magnum-knuckle-aluminum-unit-bearing-adapter-pair\"\u003eCrane Axle Magnum Knuckle Unit Bearing Adapter\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eCompatible with both standard off-road \u003cstrong\u003e8x6.5\"\u003c\/strong\u003e and modern Super Duty \u003cstrong\u003e8x170mm\u003c\/strong\u003e wheel bolt patterns.\u003c\/li\u003e\n\u003cli\u003eEngineered to clear most 17-inch and larger double beadlock wheel combinations.\u003c\/li\u003e\n\u003cli\u003eAlways verify wheel backspacing, brake caliper profile clearance, and unit bearing pilot dimensions before final assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e \u003cspan class=\"svg-wrapper icon-plus\"\u003e \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n        \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n      \u003c\/svg\u003e \u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ch3\u003e1. Why is reducing unsprung weight important for off-road braking and suspension performance?\u003c\/h3\u003e\n\u003cp\u003eHeavy factory cast-iron brake rotors and sliding calipers add significant unsprung mass to your front axle. By switching to lightweight Wilwood forged aluminum calipers and 6061 aluminum brake hats, you shed rotating mass and unsprung weight. This allows your coilover shocks to control wheel movement much more effectively over rough terrain, improving tire traction, reducing chatter, and keeping the vehicle planted.\u003c\/p\u003e\n\u003ch3\u003e2. How do the 13.5\" Wilwood rotors improve stopping power over stock brakes?\u003c\/h3\u003e\n\u003cp\u003eA larger 13.5-inch rotor diameter increases the effective mechanical leverage (braking torque) of the caliper. More rotor surface area passes through the brake pads at any given wheel speed, generating higher friction with less pedal effort—critical when stopping rigs equipped with 40- to 47-inch tires.\u003c\/p\u003e\n\u003ch3\u003e3. Will this brake kit fit factory, unmodified Ford Super Duty axles?\u003c\/h3\u003e\n\u003cp\u003eThis kit is engineered specifically as a bolt-on performance upgrade for custom steering axles running the \u003ca title=\"Crane Axle Magnum Knuckle Kit\" href=\"\/products\/crane-axle-magnum-knuckle-kit\"\u003eCrane Axle Magnum Knuckle Kit\u003c\/a\u003e and \u003ca title=\"Crane Axle Magnum Knuckle Unit Bearing Adapter\" href=\"\/products\/crane-axle-magnum-knuckle-aluminum-unit-bearing-adapter-pair\"\u003eCrane Axle Unit Bearing Adapters\u003c\/a\u003e. It is designed around 2005+ Super Duty unit bearing geometry on custom fabricated housings.\u003c\/p\u003e\n\u003ch3\u003e4. What wheel sizes and bolt patterns are compatible with this brake package?\u003c\/h3\u003e\n\u003cp\u003eThe aluminum rotor hats are dual-drilled to support both \u003cstrong\u003e8 on 6.5\"\u003c\/strong\u003e and \u003cstrong\u003e8 on 170mm\u003c\/strong\u003e wheel bolt patterns. The compact profile of the Wilwood Forged Dynalite calipers is specifically designed to clear most 17-inch double beadlock off-road wheels without interference.\u003c\/p\u003e\n\u003ch3\u003e5. What is the advantage of a fixed 4-piston caliper over a factory sliding caliper?\u003c\/h3\u003e\n\u003cp\u003eFactory sliding calipers can twist and bind under heavy off-road braking loads, leading to uneven pad wear and a spongy brake pedal. Wilwood's forged 4-piston fixed caliper design applies even, opposing clamping force across both sides of the rotor simultaneously, providing a rock-hard pedal feel, superior heat dissipation, and reliable stopping power.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e","brand":"Crane Axle","offers":[{"title":"Default Title","offer_id":54639584706835,"sku":"CA01039N","price":1335.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/CA01039N-Crane-Front-UB-Wilwood-Brake-Kit-1.jpg?v=1788281333"},{"product_id":"ford-front-3-4-ton-disc-brake-kit","title":"Crane Axle Ford Dana 60 3\/4-Ton Front Disc Brake Conversion Kit","description":"\u003cp\u003eThe \u003cstrong\u003eDana 60 Ford 3\/4-Ton Front Disc Brake Conversion Kit\u003c\/strong\u003e replaces the factory Ford one-ton brake assembly with a lighter, proven 3\/4-ton disc brake system. Designed by Crane Axle, this complete conversion kit improves braking performance, simplifies maintenance, and reduces unsprung weight while maintaining compatibility with factory Ford Dana 60 kingpin knuckles and several popular aftermarket knuckle options.\u003c\/p\u003e\n\u003cp\u003eIdeal for restoration projects, custom axle builds, rock crawlers, trail rigs, and heavy-duty off-road vehicles, this conversion provides improved pedal feel, reduced brake fade, and increased wheel clearance for many 15-inch steel wheels. Every major component needed to complete the conversion is included for a straightforward installation.\u003c\/p\u003e\n\u003ch4\u003eIncludes:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e(2) 3\/8\" Laser-Cut Brake Brackets\u003c\/li\u003e\n\u003cli\u003e(2) 12.5\" Ford 3\/4-Ton Brake Rotors\u003c\/li\u003e\n\u003cli\u003e(2) Ford Standard Duty 3\/4-Ton Brake Calipers\u003c\/li\u003e\n\u003cli\u003e(1) Set of Brake Pads\u003c\/li\u003e\n\u003cli\u003e(16) Wheel Studs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eCrane Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eFront Disc Brake Conversion Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Compatibility\u003c\/td\u003e\n\u003ctd\u003eFord Dana 60 Kingpin Front Axles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotor Diameter\u003c\/td\u003e\n\u003ctd\u003e12.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCalipers\u003c\/td\u003e\n\u003ctd\u003eFord Standard Duty 3\/4-Ton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrake Bracket Material\u003c\/td\u003e\n\u003ctd\u003e3\/8\" Laser-Cut High-Strength Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWheel Clearance\u003c\/td\u003e\n\u003ctd\u003eClears Most 15\" Steel Wheels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight Savings\u003c\/td\u003e\n\u003ctd\u003eReduced Unsprung Weight Compared to OE Ford 1-Ton Brakes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eBolt-On Conversion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Position\u003c\/td\u003e\n\u003ctd\u003eFront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYear\u003c\/th\u003e\n\u003cth\u003eAxle\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-250 \/ F-350\u003c\/td\u003e\n\u003ctd\u003e1978–1979\u003c\/td\u003e\n\u003ctd\u003eDana 60 Kingpin Front Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-350\u003c\/td\u003e\n\u003ctd\u003e1985–1991\u003c\/td\u003e\n\u003ctd\u003eDana 60 Kingpin Front Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFits Ford Dana 60 kingpin front axles.\u003c\/li\u003e\n\u003cli\u003eCompatible with Crane Axle Ford Dana 60 knuckles, OEM Ford kingpin knuckles, Solid Axle knuckles, and Reid Racing knuckles.\u003c\/li\u003e\n\u003cli\u003eDesigned to replace the factory Ford one-ton brake assembly with a 3\/4-ton disc brake system.\u003c\/li\u003e\n\u003cli\u003eProvides clearance for most 15-inch steel wheels. Verify wheel backspacing and caliper clearance before installation.\u003c\/li\u003e\n\u003cli\u003eVehicle year alone does not guarantee fitment. Always verify axle type and knuckle configuration before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ch3\u003e1. Why convert from the factory Ford one-ton brakes to a 3\/4-ton setup?\u003c\/h3\u003e\n\u003cp\u003eThe 3\/4-ton disc brake system simplifies service while providing improved pedal feel, consistent braking performance, reduced brake fade, and lighter unsprung weight than the original Ford one-ton brake assembly.\u003c\/p\u003e\n\u003ch3\u003e2. How does reducing unsprung weight improve performance?\u003c\/h3\u003e\n\u003cp\u003eLighter brake components reduce the amount of weight the suspension must control. This helps the shocks respond more effectively to rough terrain while reducing stress on steering and suspension components.\u003c\/p\u003e\n\u003ch3\u003e3. Why are the brake brackets laser cut from 3\/8-inch steel?\u003c\/h3\u003e\n\u003cp\u003eLaser cutting provides accurate caliper positioning and consistent bracket dimensions. The 3\/8-inch high-strength steel construction delivers the rigidity needed to withstand heavy braking loads in demanding off-road conditions.\u003c\/p\u003e\n\u003ch3\u003e4. Will this conversion fit aftermarket Dana 60 knuckles?\u003c\/h3\u003e\n\u003cp\u003eYes. The kit is designed to work with Crane Axle Dana 60 Ford knuckles, factory Ford kingpin knuckles, and many popular aftermarket options including Solid Axle and Reid Racing knuckles.\u003c\/p\u003e\n\u003ch3\u003e5. What should be inspected during installation?\u003c\/h3\u003e\n\u003cp\u003eVerify hub bearings, wheel studs, spindle condition, brake hoses, wheel clearance, rotor alignment, and caliper centering before final assembly. Proper wheel bearing preload and brake bleeding are critical for safe, consistent braking performance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e","brand":"Crane Axle","offers":[{"title":"Default Title","offer_id":54639584739603,"sku":"WA01032F","price":525.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/WA01032F-Ford-Front-3_4-ton-Dana-60-Disc-Brake-Kit-1_07e3b42b-fd49-466a-8c5a-96c7a11bebd1.jpg?v=1788281390"},{"product_id":"crane-axle-rear-05-super-duty-unit-bearing-wilwood-6-piston-brake-kit","title":"Crane Axle Rear 05+ Super Duty Unit Bearing Wilwood 6 Piston Brake Kit","description":"\u003cp\u003eA Light Weight Rear Brake Kit with every component handpicked for off-road performance, durability, and street reliability. This is an all-inclusive COMPLETE kit, providing everything needed to bolt on brakes to your \u003cstrong\u003e\u003ca href=\"\/products\/crane-axle-rear-unit-bearing-adapter-cup-assembly-pair\" title=\"Crane Axle Unit Bearing Cup\"\u003eCrane Axle Unit Bearing Cups\u003c\/a\u003e\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eEngineered for the harshest racing, rock-bouncing, and street-driven conditions, this brake system delivers unmatched stopping power, exceptional pedal feel, and a dramatic reduction in unsprung weight and rotating mass.\u003c\/p\u003e\n\u003cp\u003eThis kit is also the ONLY true bolt-on brake solution designed specifically for \u003cstrong\u003e\u003ca href=\"\/products\/crane-axle-rear-unit-bearing-adapter-cup-assembly-pair\" title=\"Crane Axle Unit Bearing Cup\"\u003eCrane Axle Unit Bearing Cups\u003c\/a\u003e\u003c\/strong\u003e (sold separately), ensuring perfect fitment, simplified installation, and maximum performance with no custom fabrication required.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eNote: \u003cmeta charset=\"utf-8\"\u003eFor Off-Road Use Only\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Wilwood 6 Piston Calipers \u0026amp; Brake Pads\u003c\/li\u003e\n\u003cli\u003e(2) Wilwood 13.5\" Vented Rotors\u003c\/li\u003e\n\u003cli\u003e(2) Crane Axle Brake Hats\u003c\/li\u003e\n\u003cli\u003e(2) Crane Axle Bolt-On Rear Brake Brackets\u003c\/li\u003e\n\u003cli\u003eAll Necessary Hardware for Installation\u003c\/li\u003e\n\u003cli\u003eRotor Bolts (Safety Wire Ready)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e \u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n          \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n          \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable style=\"width: 100%; border-collapse: collapse;\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth style=\"border: 1px solid #ddd; padding: 8px; background-color: #f2f2f2; text-align: left;\"\u003eComponent\u003c\/th\u003e\n\u003cth style=\"border: 1px solid #ddd; padding: 8px; background-color: #f2f2f2; text-align: left;\"\u003eSpecification\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eCalipers\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eWilwood Forged Dynalite 6 Piston\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eRotor Diameter\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e13.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eRotor Type\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eVented\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eBrake Hat Material\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eMachined 6061 Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eBracket Material\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eLaser Cut 3\/8” Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eWheel Bolt Patterns\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e8 on 6.5\" \u0026amp; 8 on 170mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003ePiston Area (per caliper)\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003e4.80 sq. in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eHardware\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eSafety Wire Ready Rotor Bolts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eFitment Type\u003c\/td\u003e\n\u003ctd style=\"border: 1px solid #ddd; padding: 8px;\"\u003eRear, Unit Bearing Cup Mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e \u003cspan class=\"svg-wrapper icon-plus\"\u003e \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n          \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n          \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003c\/svg\u003e \u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for Crane Axle 05+ Super Duty Unit Bearing Adapters\u003c\/li\u003e\n\u003cli\u003eCompatible with both 8 on 6.5” and 8 on 170mm wheel bolt patterns\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eTech Insight \u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" height=\"14\" width=\"14\"\u003e\n          \u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M2.75 7H11.25\" class=\"vertical\"\u003e\u003c\/path\u003e\n          \u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M7 2.75L7 11.25\" class=\"horizontal\"\u003e\u003c\/path\u003e\n        \u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003cp\u003eThe Crane Axle Rear 6 Piston Brake Kit was developed with off-road competition and performance trail rigs in mind.\u003c\/p\u003e\n\u003cp\u003eBy switching to forged 6 piston calipers, you gain higher clamping efficiency, improved pedal feel, and superior heat dissipation — all critical under extreme trail or race braking conditions.\u003c\/p\u003e\n\u003cp\u003eThe 13.5\" vented rotors generate increased braking torque for the same pedal input, translating into shorter stopping distances. Meanwhile, the lightweight 6061 aluminum rotor hats cut unsprung weight, improving suspension response and wheel control — helping your shocks perform at their best and keeping traction consistent over uneven terrain.\u003c\/p\u003e\n\u003cp\u003eThis isn’t just an upgrade — it’s a system built for maximum performance, minimal weight, and total reliability.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e","brand":"Crane Axle","offers":[{"title":"Default Title","offer_id":54639584837907,"sku":"CA01040N6P","price":1699.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/CA01040N6P-Crane-Rear-UB-Wilwood-Brake-Kit-1_60982af3-9e33-4538-9b00-803761b72d1d.jpg?v=1788281455"},{"product_id":"magnum-knuckle-light-weight-brake-kit","title":"Crane Axle Magnum Knuckle Lightweight Brake Kit","description":"\u003cp\u003eThe \u003cstrong\u003eCrane Axle Magnum Knuckle Lightweight Wilwood 14\" Brake Kit\u003c\/strong\u003e is engineered for builders who demand maximum braking performance without unnecessary weight. Designed for Magnum Knuckles and other steering big knuckles utilizing a 2.5-ton spindle with Ouverson Super 8 wheel hubs, this system combines 14-inch Wilwood slip-on rotors with lightweight aluminum hats and proven four-piston calipers for exceptional stopping power.\u003c\/p\u003e\n\u003cp\u003eCompared to a traditional ¾-ton brake conversion, this package removes approximately 36.5 pounds of unsprung weight while increasing rotor diameter for greater braking leverage. The reduction in rotating mass allows the suspension to react more quickly over rough terrain while the Wilwood four-piston calipers deliver consistent clamping force for rock bouncers, Ultra4 cars, trail rigs, and other high-performance off-road applications.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eNote: \u003cmeta charset=\"utf-8\"\u003eFor Off-Road Use Only\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003eIncludes:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Bolt-On Caliper Brackets with Spacers\u003c\/li\u003e\n\u003cli\u003e(2) Wilwood 4-Piston Brake Calipers\u003c\/li\u003e\n\u003cli\u003e(2) 14\" Wilwood Slip-On Rotors with Aluminum Hats\u003c\/li\u003e\n\u003cli\u003e(1) Set of Wilwood Brake Pads\u003c\/li\u003e\n\u003cli\u003eCaliper Installation Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e \u003cspan class=\"svg-wrapper icon-plus\"\u003e \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n        \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n      \u003c\/svg\u003e \u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eCrane Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eLightweight Front Brake Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle Compatibility\u003c\/td\u003e\n\u003ctd\u003e2.5-Ton Spindle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWheel Hub Compatibility\u003c\/td\u003e\n\u003ctd\u003eOuverson Super 8 Wheel Hubs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotor Diameter\u003c\/td\u003e\n\u003ctd\u003e14\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotor Style\u003c\/td\u003e\n\u003ctd\u003eSlip-On with Aluminum Hats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCalipers\u003c\/td\u003e\n\u003ctd\u003eWilwood 4-Piston\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight Savings\u003c\/td\u003e\n\u003ctd\u003eApproximately 36.5 lbs vs. ¾-Ton Brake Conversion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCaliper Brackets\u003c\/td\u003e\n\u003ctd\u003eLaser-Cut High-Strength Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eBolt-On\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e \u003cspan class=\"svg-wrapper icon-plus\"\u003e \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n        \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n      \u003c\/svg\u003e \u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eComponent\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSteering Knuckles\u003c\/td\u003e\n\u003ctd\u003eMagnum Knuckles and Other 2.5-Ton Spindle Applications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle\u003c\/td\u003e\n\u003ctd\u003e2.5-Ton\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWheel Hub\u003c\/td\u003e\n\u003ctd\u003eOuverson Super 8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for steering knuckles using a 2.5-ton spindle.\u003c\/li\u003e\n\u003cli\u003eRequires Ouverson Super 8 wheel hubs.\u003c\/li\u003e\n\u003cli\u003eCompatible with Magnum Knuckles and similar 2.5-ton spindle applications.\u003c\/li\u003e\n\u003cli\u003eVerify wheel diameter and inside barrel clearance before installation, as 14-inch rotors and four-piston calipers require adequate space.\u003c\/li\u003e\n\u003cli\u003eConfirm spindle, hub, rotor, and brake hose compatibility prior to assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e \u003cspan class=\"svg-wrapper icon-plus\"\u003e \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n        \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n      \u003c\/svg\u003e \u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ch3\u003e1. Why is reducing unsprung weight important?\u003c\/h3\u003e\n\u003cp\u003eRemoving 36.5 pounds of unsprung weight allows the suspension to react more quickly to terrain changes. Less rotating and unsprung mass helps improve ride quality, tire contact, steering response, and overall suspension performance.\u003c\/p\u003e\n\u003ch3\u003e2. What advantage does a 14-inch rotor provide?\u003c\/h3\u003e\n\u003cp\u003eA larger rotor increases braking leverage by moving the brake pads farther from the center of rotation. This allows the brake system to generate greater stopping torque with the same hydraulic pressure.\u003c\/p\u003e\n\u003ch3\u003e3. Why use Wilwood four-piston calipers?\u003c\/h3\u003e\n\u003cp\u003eFour-piston calipers apply braking force evenly across both brake pads, improving pad wear, pedal feel, and braking consistency during repeated hard stops on heavy off-road vehicles.\u003c\/p\u003e\n\u003ch3\u003e4. What are the benefits of slip-on rotors with aluminum hats?\u003c\/h3\u003e\n\u003cp\u003eSlip-on rotors simplify maintenance by allowing the rotor to be replaced without disassembling the wheel hub. Aluminum hats also reduce rotating weight while maintaining excellent strength.\u003c\/p\u003e\n\u003ch3\u003e5. Is this a bolt-on brake conversion?\u003c\/h3\u003e\n\u003cp\u003eYes. The included laser-cut caliper brackets are designed as a bolt-on installation for compatible Magnum Knuckle and 2.5-ton spindle applications using Ouverson Super 8 wheel hubs. Verify wheel clearance and component compatibility before installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e","brand":"Crane Axle","offers":[{"title":"Default Title","offer_id":54639584870675,"sku":"WA01007","price":1599.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/WA01007-Big-Brakes-Kit.jpg?v=1788281349"},{"product_id":"crane-axle-gm-rear-dana-60-wilwood-lightweight-brake-kit-6-piston","title":"Crane Axle Lightweight Wilwood 8 x 6.5\" Rear Brake Kit - 6-Piston","description":"\u003cp\u003eThe \u003cstrong\u003eCrane Axle Wilwood 13.5\" Rear Brake Kit\u003c\/strong\u003e is a lightweight, high-performance disc brake package designed for custom rear axle assemblies in rock crawlers, rock bouncers, Ultra4 race cars, prerunners, trail rigs, and other high-performance off-road builds. Built around Wilwood Forged Dynalite six-piston calipers and 13.5\" vented rotors, the system provides strong rear braking performance without the weight of a traditional heavy-duty one-ton brake package.\u003c\/p\u003e\n\u003cp\u003eThe combination of machined 6061 aluminum brake hats, Wilwood vented rotors, and six-piston calipers reduces rotating and unsprung weight while providing the braking leverage and heat capacity needed for large tires and aggressive off-road use. Weld-on caliper brackets allow the brake system to be integrated into compatible custom rear axle assemblies while supporting both 8 on 6.5\" and 8 on 170mm wheel bolt patterns.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eNote: \u003cmeta charset=\"utf-8\"\u003eFor Off-Road Use Only\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003eIncludes:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Weld-On Caliper Brackets\u003c\/li\u003e\n\u003cli\u003e(2) Wilwood Forged Dynalite 6-Piston Calipers\u003c\/li\u003e\n\u003cli\u003e(2) 13.5\" Vented Wilwood Rotors\u003c\/li\u003e\n\u003cli\u003e(2) Crane Axle 6061 Aluminum Brake Hats\u003c\/li\u003e\n\u003cli\u003e(1) Set of DynaPro 6 Brake Pads\u003c\/li\u003e\n\u003cli\u003eInstallation Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eCrane Axle \/ Wilwood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eRear Disc Brake Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Position\u003c\/td\u003e\n\u003ctd\u003eRear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCalipers\u003c\/td\u003e\n\u003ctd\u003eWilwood Forged Dynalite 6-Piston\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotor Diameter\u003c\/td\u003e\n\u003ctd\u003e13.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotor Style\u003c\/td\u003e\n\u003ctd\u003eVented\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrake Hat Material\u003c\/td\u003e\n\u003ctd\u003eMachined 6061 Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCaliper Brackets\u003c\/td\u003e\n\u003ctd\u003eLaser-Cut 3\/8\" Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCaliper Bracket Installation\u003c\/td\u003e\n\u003ctd\u003eWeld-On\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWheel Bolt Patterns\u003c\/td\u003e\n\u003ctd\u003e8 on 6.5\" and 8 on 170mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePiston Area (Per Caliper)\u003c\/td\u003e\n\u003ctd\u003e4.80 sq. in.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotor Hardware\u003c\/td\u003e\n\u003ctd\u003eSafety-Wire Ready Bolts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Application\u003c\/td\u003e\n\u003ctd\u003eCustom Rear Axle Brake Systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned For:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCustom rear axle assemblies\u003c\/li\u003e\n\u003cli\u003eRear axles using compatible 8-lug wheel hubs\u003c\/li\u003e\n\u003cli\u003e8 on 6.5\" wheel bolt patterns\u003c\/li\u003e\n\u003cli\u003e8 on 170mm wheel bolt patterns\u003c\/li\u003e\n\u003cli\u003eCustom fabricated rear brake conversions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCommon Applications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRock crawlers\u003c\/li\u003e\n\u003cli\u003eRock bouncers\u003c\/li\u003e\n\u003cli\u003eUltra4 race cars\u003c\/li\u003e\n\u003cli\u003ePrerunners\u003c\/li\u003e\n\u003cli\u003eTrail buggies\u003c\/li\u003e\n\u003cli\u003eCustom tube chassis vehicles\u003c\/li\u003e\n\u003cli\u003eHeavy-duty off-road axle builds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCaliper brackets are weld-on and require proper positioning and welding during installation.\u003c\/li\u003e\n\u003cli\u003eVerify rear hub and axle configuration before ordering.\u003c\/li\u003e\n\u003cli\u003eVerify wheel diameter, wheel backspacing, and inside barrel clearance for the six-piston calipers and 13.5\" rotors.\u003c\/li\u003e\n\u003cli\u003eBrake hat bolt pattern must match the wheel hub configuration.\u003c\/li\u003e\n\u003cli\u003eFinal caliper bracket placement must properly center the caliper over the rotor.\u003c\/li\u003e\n\u003cli\u003eBrake hose routing must allow full suspension travel without stretching, binding, or contacting moving components.\u003c\/li\u003e\n\u003cli\u003eVerify master cylinder sizing, front-to-rear brake balance, and overall hydraulic system compatibility before operation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ch3\u003eWhy use a six-piston caliper on the rear axle?\u003c\/h3\u003e\n\u003cp\u003eThe Wilwood six-piston caliper provides strong, consistent clamping force across the brake pad while giving high-performance off-road builds the braking capacity needed for large tires and repeated hard braking. Proper front-to-rear brake balance must still be considered when designing the complete braking system.\u003c\/p\u003e\n\u003ch3\u003eWhat are the advantages of 13.5\" rear brake rotors?\u003c\/h3\u003e\n\u003cp\u003eA larger-diameter rotor increases mechanical braking leverage and provides additional surface area for managing heat. The vented rotor design also helps dissipate heat during repeated braking on steep terrain, high-speed sections, and competition use.\u003c\/p\u003e\n\u003ch3\u003eWhy does this kit use aluminum brake hats?\u003c\/h3\u003e\n\u003cp\u003eThe machined 6061 aluminum hats reduce rotating and unsprung weight compared with a heavy one-piece rotor assembly. Reducing weight at the axle helps the suspension respond more effectively to changing terrain while retaining a large 13.5\" braking surface.\u003c\/p\u003e\n\u003ch3\u003eWill this rear brake kit clear every wheel?\u003c\/h3\u003e\n\u003cp\u003eNo. The six-piston calipers and 13.5\" rotors require adequate wheel diameter and inside barrel clearance. Wheel diameter, backspacing, hub configuration, and caliper clearance should all be verified before installation.\u003c\/p\u003e\n\u003ch3\u003eAre the caliper brackets bolt-on?\u003c\/h3\u003e\n\u003cp\u003eNo. This rear brake kit uses weld-on caliper brackets. The brackets must be properly positioned so the caliper is centered over the rotor before final welding. Proper fabrication and welding are critical to brake alignment and performance.\u003c\/p\u003e\n\u003ch3\u003eDo I need to consider front-to-rear brake bias?\u003c\/h3\u003e\n\u003cp\u003eYes. Rear caliper piston area and rotor diameter affect the overall brake balance of the vehicle. Master cylinder sizing, front brake configuration, vehicle weight distribution, tire size, and intended use should all be considered when setting up the complete braking system.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e","brand":"Crane Axle","offers":[{"title":"Default Title","offer_id":54639584903443,"sku":"CA01051R-6","price":1774.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/CA01051R-6-Crane-GM-Wilwood-Brake-Kit-6-Piston-1.jpg?v=1789499007"},{"product_id":"gm-front-3-4-ton-disc-brake-kit","title":"Crane Axle GM Dana 60 Front 3\/4-Ton Disc Brake Conversion Kit","description":"\u003cp\u003eThe \u003cstrong\u003eCrane Axle GM Dana 60 Front 3\/4-Ton Disc Brake Conversion Kit\u003c\/strong\u003e replaces the large factory 1-ton brake package on compatible Dana 60 kingpin front axles with a lighter GM 3\/4-ton disc brake setup. Using 12.5\" rotors and standard-duty GM 3\/4-ton calipers reduces wheel-end weight and creates additional wheel clearance while keeping the brake system based around readily serviceable components.\u003c\/p\u003e\n\n\u003cp\u003eDesigned around Crane Axle GM Kingpin Knuckles, the kit can also be used with compatible stock and aftermarket kingpin knuckles, including Reid and Solid. It is a practical brake package for custom Dana 60 front axles, GM-based axle builds, and off-road vehicles where wheel clearance, serviceability, and reduced unsprung weight matter.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e(2) 3\/8\" Thick Laser-Cut Brake Brackets\u003c\/li\u003e\n  \u003cli\u003e(2) GM 12.5\" Standard 3\/4-Ton Brake Rotors\u003c\/li\u003e\n  \u003cli\u003e(2) GM Standard-Duty 3\/4-Ton Brake Calipers\u003c\/li\u003e\n  \u003cli\u003e(1) Set of Brake Pads\u003c\/li\u003e\n  \u003cli\u003e(16) Wheel Studs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n  \u003csummary class=\"details__header\"\u003e\n    \u003cstrong\u003eSpecifications\u003c\/strong\u003e\n    \u003cspan class=\"svg-wrapper icon-plus\"\u003e\n      \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n        \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n      \u003c\/svg\u003e\n    \u003c\/span\u003e\n  \u003c\/summary\u003e\n\n  \u003cdiv class=\"details-content rte\"\u003e\n    \u003ctable class=\"custom-specs-table\"\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003cth\u003eSpecification\u003c\/th\u003e\n          \u003cth\u003eDetails\u003c\/th\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eManufacturer\u003c\/td\u003e\n          \u003ctd\u003eCrane Axle\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eProduct Type\u003c\/td\u003e\n          \u003ctd\u003eFront Disc Brake Conversion Kit\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eAxle Platform\u003c\/td\u003e\n          \u003ctd\u003eDana 60\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eAxle Position\u003c\/td\u003e\n          \u003ctd\u003eFront\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eKnuckle Type\u003c\/td\u003e\n          \u003ctd\u003eKingpin\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eBrake Configuration\u003c\/td\u003e\n          \u003ctd\u003eGM 3\/4-Ton Disc Brake\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eRotor Diameter\u003c\/td\u003e\n          \u003ctd\u003e12.5\"\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eRotor Type\u003c\/td\u003e\n          \u003ctd\u003eStandard GM 3\/4-Ton\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eCaliper Type\u003c\/td\u003e\n          \u003ctd\u003eGM Standard-Duty 3\/4-Ton\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eBrake Bracket Thickness\u003c\/td\u003e\n          \u003ctd\u003e3\/8\"\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eBrake Bracket Construction\u003c\/td\u003e\n          \u003ctd\u003eLaser-Cut Plate Steel\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eWheel Stud Quantity\u003c\/td\u003e\n          \u003ctd\u003e16\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eWheel Clearance\u003c\/td\u003e\n          \u003ctd\u003eClears Most 15\" Steel Wheels\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003ePrimary Application\u003c\/td\u003e\n          \u003ctd\u003eDana 60 Kingpin Front Axle Brake Conversion\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n  \u003csummary class=\"details__header\"\u003e\n    \u003cstrong\u003eFitment\u003c\/strong\u003e\n    \u003cspan class=\"svg-wrapper icon-plus\"\u003e\n      \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n        \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n      \u003c\/svg\u003e\n    \u003c\/span\u003e\n  \u003c\/summary\u003e\n\n  \u003cdiv class=\"details-content rte\"\u003e\n    \u003cp\u003e\u003cstrong\u003eCompatible Knuckles:\u003c\/strong\u003e\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eCrane Axle GM Dana 60 Kingpin Knuckles\u003c\/li\u003e\n      \u003cli\u003eCompatible Stock GM Kingpin Knuckles\u003c\/li\u003e\n      \u003cli\u003eCompatible Stock Ford Kingpin Knuckles\u003c\/li\u003e\n      \u003cli\u003eReid Kingpin Knuckles\u003c\/li\u003e\n      \u003cli\u003eSolid Kingpin Knuckles\u003c\/li\u003e\n    \u003c\/ul\u003e\n\n    \u003cp\u003e\u003cstrong\u003eFactory Applications:\u003c\/strong\u003e\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003e1979–1987 Chevrolet K30 with compatible Dana 60 kingpin front axle\u003c\/li\u003e\n      \u003cli\u003e1988–1991 Chevrolet K30 Crew Cab with compatible Dana 60 kingpin front axle\u003c\/li\u003e\n    \u003c\/ul\u003e\n\n    \u003cp\u003e\u003cstrong\u003eBest Suited For:\u003c\/strong\u003e\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eCustom Dana 60 front axle builds\u003c\/li\u003e\n      \u003cli\u003eDana 60 axle swaps\u003c\/li\u003e\n      \u003cli\u003eRock crawlers and trail rigs\u003c\/li\u003e\n      \u003cli\u003eCustom tube chassis vehicles\u003c\/li\u003e\n      \u003cli\u003eApplications converting from the heavier GM 1-ton brake package\u003c\/li\u003e\n    \u003c\/ul\u003e\n\n    \u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eDesigned for Dana 60 kingpin steering knuckles.\u003c\/li\u003e\n      \u003cli\u003eNot intended for ball-joint Dana 60 knuckles.\u003c\/li\u003e\n      \u003cli\u003eClears most 15\" steel wheels; actual clearance can vary by wheel design and backspacing.\u003c\/li\u003e\n      \u003cli\u003eFor swapped or custom axles, verify the actual axle and knuckle configuration rather than relying on vehicle year, make, and model.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n  \u003csummary class=\"details__header\"\u003e\n    \u003cstrong\u003eFAQ\u003c\/strong\u003e\n    \u003cspan class=\"svg-wrapper icon-plus\"\u003e\n      \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n        \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n      \u003c\/svg\u003e\n    \u003c\/span\u003e\n  \u003c\/summary\u003e\n\n  \u003cdiv class=\"details-content rte\"\u003e\n    \u003ch3\u003eWhy convert a Dana 60 from 1-ton to 3\/4-ton brakes?\u003c\/h3\u003e\n    \u003cp\u003eThe 3\/4-ton brake package reduces the size and weight of the wheel-end brake components while providing additional wheel clearance. It is a useful setup for off-road Dana 60 builds where reduced unsprung weight and serviceability are priorities.\u003c\/p\u003e\n\n    \u003ch3\u003eWhat size rotors are included?\u003c\/h3\u003e\n    \u003cp\u003eThe kit includes two 12.5\" standard GM 3\/4-ton brake rotors along with matching standard-duty GM 3\/4-ton calipers and brake pads.\u003c\/p\u003e\n\n    \u003ch3\u003eWill this brake kit fit Crane Axle kingpin knuckles?\u003c\/h3\u003e\n    \u003cp\u003eYes. The kit is designed to work directly with Crane Axle GM Dana 60 Kingpin Knuckles. It can also be used with compatible stock, Reid, and Solid kingpin knuckles.\u003c\/p\u003e\n\n    \u003ch3\u003eWill this kit clear 15\" wheels?\u003c\/h3\u003e\n    \u003cp\u003eThe supplied fitment information states that the brake package clears most 15\" steel wheels. Wheel design and backspacing vary, so clearance should still be verified for the specific wheel being used.\u003c\/p\u003e\n\n    \u003ch3\u003eCan I use this kit on a custom or swapped Dana 60?\u003c\/h3\u003e\n    \u003cp\u003eYes, provided the axle uses a compatible Dana 60 kingpin knuckle and wheel-end configuration. For custom axle builds and swaps, determine fitment from the axle components rather than the vehicle application.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e","brand":"Crane Axle","offers":[{"title":"Default Title","offer_id":54639584936211,"sku":"WA01032","price":495.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/WA01032-GM-Dana-60-34-ton-disc-brake-kit-1.png?v=1788281447"},{"product_id":"gm-14-bolt-3-4-ton-weld-on-brake-bracket","title":"Crane GM 14-Bolt Weld-On Disc Brake Conversion Brackets (Pair)","description":"\u003cp\u003eThe \u003cstrong\u003eCrane Axle GM 14-Bolt Weld-On Disc Brake Brackets\u003c\/strong\u003e provide the mounting foundation for converting a GM 14-Bolt full-float rear axle from factory drum brakes to a GM 3\/4-ton disc brake setup. Made from 3\/8\" steel, the brackets are designed to weld directly to compatible 3.5\" axle tubes and position the calipers around common GM 3\/4-ton brake components.\u003c\/p\u003e\n\n\u003cp\u003eThe weld-on design gives fabricators control over final caliper position and works well for factory 14-Bolt housings, axle swaps, and custom off-road axle builds. Converting to disc brakes can remove much of the weight and complexity of the original drum assemblies while simplifying wheel-end service on trail rigs, rock crawlers, tow rigs, and custom 4x4 builds.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e(2) 3\/8\" Weld-On Disc Brake Caliper Brackets\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n  \u003csummary class=\"details__header\"\u003e\n    \u003cstrong\u003eSpecifications\u003c\/strong\u003e\n    \u003cspan class=\"svg-wrapper icon-plus\"\u003e\n      \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n        \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n      \u003c\/svg\u003e\n    \u003c\/span\u003e\n  \u003c\/summary\u003e\n\n  \u003cdiv class=\"details-content rte\"\u003e\n    \u003ctable class=\"custom-specs-table\"\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003cth\u003eSpecification\u003c\/th\u003e\n          \u003cth\u003eDetails\u003c\/th\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eManufacturer\u003c\/td\u003e\n          \u003ctd\u003eCrane Axle\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eProduct Type\u003c\/td\u003e\n          \u003ctd\u003eWeld-On Disc Brake Caliper Brackets\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eAxle Platform\u003c\/td\u003e\n          \u003ctd\u003eGM 14-Bolt Full-Float\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eAxle Position\u003c\/td\u003e\n          \u003ctd\u003eRear\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eBrake Conversion\u003c\/td\u003e\n          \u003ctd\u003eGM 3\/4-Ton Disc Brake\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eAxle Tube Diameter\u003c\/td\u003e\n          \u003ctd\u003e3.5\"\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eBracket Thickness\u003c\/td\u003e\n          \u003ctd\u003e3\/8\"\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMaterial\u003c\/td\u003e\n          \u003ctd\u003eSteel\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMounting Style\u003c\/td\u003e\n          \u003ctd\u003eWeld-On\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eRotor Compatibility\u003c\/td\u003e\n          \u003ctd\u003eCompatible GM 3\/4-Ton Rotors\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eCaliper Compatibility\u003c\/td\u003e\n          \u003ctd\u003eCompatible GM 3\/4-Ton Calipers\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eQuantity\u003c\/td\u003e\n          \u003ctd\u003ePair\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003ePrimary Application\u003c\/td\u003e\n          \u003ctd\u003eGM 14-Bolt Full-Float Drum-to-Disc Brake Conversion\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n  \u003csummary class=\"details__header\"\u003e\n    \u003cstrong\u003eFitment\u003c\/strong\u003e\n    \u003cspan class=\"svg-wrapper icon-plus\"\u003e\n      \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n        \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n      \u003c\/svg\u003e\n    \u003c\/span\u003e\n  \u003c\/summary\u003e\n\n  \u003cdiv class=\"details-content rte\"\u003e\n    \u003cp\u003e\u003cstrong\u003eDesigned For:\u003c\/strong\u003e\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eGM 14-Bolt full-float rear axles\u003c\/li\u003e\n      \u003cli\u003e3.5\" axle tubes\u003c\/li\u003e\n      \u003cli\u003eGM 3\/4-ton disc brake conversions\u003c\/li\u003e\n      \u003cli\u003eFactory 14-Bolt housing rebuilds\u003c\/li\u003e\n      \u003cli\u003eCustom 14-Bolt axle builds and swaps\u003c\/li\u003e\n      \u003cli\u003eRock crawlers, trail rigs, tow rigs, and custom 4x4s\u003c\/li\u003e\n    \u003c\/ul\u003e\n\n    \u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eDoes not fit GM 14-Bolt semi-float axle applications.\u003c\/li\u003e\n      \u003cli\u003eVerify the axle has 3.5\" diameter tubes before ordering.\u003c\/li\u003e\n      \u003cli\u003eRotor, caliper, hub, and wheel-end configuration must be checked together before final welding.\u003c\/li\u003e\n      \u003cli\u003eVehicle year, make, and model alone do not guarantee fitment because 14-Bolt axles are commonly swapped between vehicles.\u003c\/li\u003e\n      \u003cli\u003eTest-fit the complete brake assembly and establish caliper position before welding the brackets permanently to the housing.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n  \u003csummary class=\"details__header\"\u003e\n    \u003cstrong\u003eFAQ\u003c\/strong\u003e\n    \u003cspan class=\"svg-wrapper icon-plus\"\u003e\n      \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n        \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n      \u003c\/svg\u003e\n    \u003c\/span\u003e\n  \u003c\/summary\u003e\n\n  \u003cdiv class=\"details-content rte\"\u003e\n    \u003ch3\u003eWhat axle do these disc brake brackets fit?\u003c\/h3\u003e\n    \u003cp\u003eThese brackets are designed for GM 14-Bolt full-float rear axles with 3.5\" axle tubes. They are not intended for 14-Bolt semi-float axle applications.\u003c\/p\u003e\n\n    \u003ch3\u003eWhat brakes are these brackets designed to use?\u003c\/h3\u003e\n    \u003cp\u003eThe brackets are designed around compatible GM 3\/4-ton disc brake calipers and rotors. Verify the complete rotor, hub, and caliper configuration before final installation.\u003c\/p\u003e\n\n    \u003ch3\u003eWhy use weld-on brake brackets instead of bolt-on brackets?\u003c\/h3\u003e\n    \u003cp\u003eThe weld-on design lets the fabricator establish the caliper position around the actual hub and rotor assembly. Once alignment and clearance are confirmed, the brackets are permanently welded to the axle housing.\u003c\/p\u003e\n\n    \u003ch3\u003eHow should the brackets be positioned before welding?\u003c\/h3\u003e\n    \u003cp\u003eMock up the hubs, rotors, calipers, and pads before final welding. Center the caliper over the rotor and verify clearance for the caliper body, bleeder, brake hose, wheel, and surrounding suspension components.\u003c\/p\u003e\n\n    \u003ch3\u003eDoes this conversion retain a parking brake?\u003c\/h3\u003e\n    \u003cp\u003eThese brackets do not provide a parking brake system by themselves. Parking brake function depends on the calipers and supporting components selected for the complete brake system.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e","brand":"Crane Axle","offers":[{"title":"Default Title","offer_id":54639584968979,"sku":"F021010","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/F021010-GM-14-bolt-3-4-ton-weld-on-brake-bracket.jpg?v=1788281327"},{"product_id":"crane-axle-rear-gm-dana-60-front-wilwood-brake-kit-4-piston","title":"Crane Axle Lightweight Wilwood 8 x 6.5\" Rear Brake Kit - 4-Piston","description":"\u003cp\u003eThe \u003cstrong\u003eCrane Axle Lightweight Wilwood 8 x 6.5\" Rear Brake Kit - 4-Piston\u003c\/strong\u003e is a lightweight, high-performance rear disc brake package designed for custom axle assemblies in rock crawlers, rock bouncers, Ultra4 race cars, prerunners, trail rigs, and other performance off-road builds. Built around Wilwood Forged Dynalite 4-piston calipers and 13.5\" vented rotors, this system delivers strong, predictable rear braking without the weight of a traditional heavy-duty brake package.\u003c\/p\u003e\n\u003cp\u003eMachined 6061 aluminum Crane Axle brake hats, Wilwood vented rotors, and 4-piston calipers reduce rotating and unsprung weight while providing the braking leverage and heat capacity needed for large tires and demanding off-road use. Weld-on 3\/8\" steel caliper brackets allow the system to be integrated into compatible custom rear axle assemblies, while the brake hats support 8 on 6.5\" and 8 on 170mm wheel bolt patterns.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eNote: \u003cmeta charset=\"utf-8\"\u003eFor Off-Road Use Only\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch4\u003eIncludes:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Weld-On Caliper Brackets\u003c\/li\u003e\n\u003cli\u003e(2) Wilwood Forged Dynalite 4-Piston Calipers\u003c\/li\u003e\n\u003cli\u003e(2) 13.5\" Vented Wilwood Rotors\u003c\/li\u003e\n\u003cli\u003e(2) Crane Axle 6061 Aluminum Brake Hats\u003c\/li\u003e\n\u003cli\u003e(1) Set of DynaPro Brake Pads\u003c\/li\u003e\n\u003cli\u003eInstallation Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eCrane Axle \/ Wilwood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eLightweight Rear Disc Brake Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Position\u003c\/td\u003e\n\u003ctd\u003eRear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCalipers\u003c\/td\u003e\n\u003ctd\u003eWilwood Forged Dynalite 4-Piston\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePiston Area\u003c\/td\u003e\n\u003ctd\u003e4.80 sq. in. Per Caliper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotor Diameter\u003c\/td\u003e\n\u003ctd\u003e13.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotor Style\u003c\/td\u003e\n\u003ctd\u003eVented\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrake Hat Material\u003c\/td\u003e\n\u003ctd\u003eMachined 6061 Aluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCaliper Brackets\u003c\/td\u003e\n\u003ctd\u003eLaser-Cut 3\/8\" Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCaliper Bracket Installation\u003c\/td\u003e\n\u003ctd\u003eWeld-On\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWheel Bolt Patterns\u003c\/td\u003e\n\u003ctd\u003e8 on 6.5\" \u0026amp; 8 on 170mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotor Hardware\u003c\/td\u003e\n\u003ctd\u003eSafety-Wire Ready Bolts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Wheel Diameter\u003c\/td\u003e\n\u003ctd\u003e17\"+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Application\u003c\/td\u003e\n\u003ctd\u003eCustom Rear Axle Brake Systems\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned For:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible 8-lug rear wheel hubs\u003c\/li\u003e\n\u003cli\u003eCustom rear axle assemblies\u003c\/li\u003e\n\u003cli\u003ePerformance off-road rear brake conversions\u003c\/li\u003e\n\u003cli\u003e8 on 6.5\" wheel bolt patterns\u003c\/li\u003e\n\u003cli\u003e8 on 170mm wheel bolt patterns\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for compatible custom rear axle configurations.\u003c\/li\u003e\n\u003cli\u003eRequires weld-on caliper bracket installation.\u003c\/li\u003e\n\u003cli\u003eCaliper brackets must be positioned to properly center the calipers over the rotors before final welding.\u003c\/li\u003e\n\u003cli\u003eRequires 17\" or larger wheels for rotor and caliper clearance.\u003c\/li\u003e\n\u003cli\u003eActual wheel clearance varies based on wheel design and backspacing.\u003c\/li\u003e\n\u003cli\u003eVerify axle housing, hub, brake hat, rotor, and wheel compatibility before installation.\u003c\/li\u003e\n\u003cli\u003eBrake hoses must be routed and secured away from suspension components, tires, exhaust, and other moving parts.\u003c\/li\u003e\n\u003cli\u003eVerify master cylinder sizing and front-to-rear brake balance as part of the complete braking system.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ch3\u003eWhat axle is this rear brake kit designed for?\u003c\/h3\u003e\n\u003cp\u003eThis is a custom rear axle brake package rather than a vehicle-specific brake conversion. It is designed around compatible 8-lug rear wheel hubs and weld-on caliper brackets, allowing builders to integrate the brake system into compatible custom rear axle assemblies.\u003c\/p\u003e\n\u003ch3\u003eWhat bolt patterns does this brake kit support?\u003c\/h3\u003e\n\u003cp\u003eThe Crane Axle brake hats are designed to support both 8 on 6.5\" and 8 on 170mm wheel bolt patterns. The complete hub, brake hat, rotor, and wheel combination should be verified before final assembly.\u003c\/p\u003e\n\u003ch3\u003eWhy use a 4-piston Wilwood caliper on the rear axle?\u003c\/h3\u003e\n\u003cp\u003eThe Wilwood Forged Dynalite 4-piston caliper provides consistent clamping force and predictable brake modulation in a compact, lightweight package. This makes it well suited to performance off-road builds where braking control and reduced weight are both important.\u003c\/p\u003e\n\u003ch3\u003eWhat size wheels are required with the 13.5\" rotors?\u003c\/h3\u003e\n\u003cp\u003eA 17\" or larger wheel is required for rotor and caliper clearance. Actual clearance varies by wheel design and backspacing, so wheel-to-caliper clearance should always be verified before final assembly.\u003c\/p\u003e\n\u003ch3\u003eDoes this rear brake kit require welding?\u003c\/h3\u003e\n\u003cp\u003eYes. The included 3\/8\" steel caliper brackets are weld-on components. The brackets must be properly positioned to center the calipers over the rotors before final welding.\u003c\/p\u003e\n\u003ch3\u003eDo I need to consider brake bias when installing this kit?\u003c\/h3\u003e\n\u003cp\u003eYes. Rear caliper piston area and rotor diameter affect overall front-to-rear brake balance. Master cylinder sizing, front brake configuration, vehicle weight distribution, tire size, and intended use should all be considered when setting up the complete braking system.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e","brand":"Crane Axle","offers":[{"title":"Default Title","offer_id":54639585001747,"sku":"CA01051R","price":1566.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/CA01051R-Crane-Axle-Rear-Wilwood-Brake-Kit-1_3.jpg?v=1789499317"},{"product_id":"steering-ram-mount-kit","title":"WOD Front Steering Ram Mount Kit for PSC 2.5\" x 8\" Double-Ended Cylinders","description":"\u003cp\u003eThe \u003cstrong\u003eSteering Ram Mount Kit for PSC 2.5\" x 8\" Double-Ended Hydraulic Cylinders\u003c\/strong\u003e is a complete weld-on mounting solution engineered by Wide Open Design for full hydraulic steering systems. Designed to fit Dana 44, Dana 60, GM 10-Bolt, GM 14-Bolt, and Dana 80 steering axles, this kit provides a strong foundation for mounting a PSC 2.5\" x 8\" double-ended steering ram on custom axle builds.\u003c\/p\u003e\n\u003cp\u003eThe kit includes a pre-bent 1.75\" x .188\" wall DOM tube with an internal sleeve, allowing builders to fine-tune the overall width before final welding. Combined with a laser-cut 1\/4\" steel mounting plate and reinforcement gussets, the finished assembly delivers the rigidity needed for rock crawlers, Ultra4 race cars, buggies, and other high-load hydraulic steering applications.\u003c\/p\u003e\n\u003ch4\u003eIncludes:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Pre-Bent 1.75\" x .188\" Wall DOM Tube\u003c\/li\u003e\n\u003cli\u003e(1) Tube Sleeve\u003c\/li\u003e\n\u003cli\u003e(1) 1\/4\" Steering Ram Mount Plate\u003c\/li\u003e\n\u003cli\u003e(2) Laser-Cut Steering Ram Tube Gussets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Steering ram clamps are sold separately. The mounting plate is designed to work with either one pair or two pairs of steering ram clamps depending on your installation.\u003c\/p\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eWide Open Design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eWeld-On Steering Ram Mount Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Steering Cylinder\u003c\/td\u003e\n\u003ctd\u003ePSC 2.5\" x 8\" Double-Ended Hydraulic Ram\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible Axles\u003c\/td\u003e\n\u003ctd\u003eDana 44, Dana 60, GM 10-Bolt, GM 14-Bolt, Dana 80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross Tube\u003c\/td\u003e\n\u003ctd\u003e1.75\" x .188\" Wall DOM Steel (Pre-Bent)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTube Sleeve\u003c\/td\u003e\n\u003ctd\u003eIncluded for Width Adjustment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMount Plate Material\u003c\/td\u003e\n\u003ctd\u003e1\/4\" High-Strength Plate Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReinforcement\u003c\/td\u003e\n\u003ctd\u003eLaser-Cut Gussets\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eWeld-On\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Manufacture\u003c\/td\u003e\n\u003ctd\u003eMade in the USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003cp\u003eDesigned for custom front steering axle applications using a PSC 2.5\" x 8\" double-ended hydraulic steering cylinder.\u003c\/p\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eComponent\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSteering Cylinder\u003c\/td\u003e\n\u003ctd\u003ePSC 2.5\" x 8\" Double-Ended Ram\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Housings\u003c\/td\u003e\n\u003ctd\u003eDana 44, Dana 60, GM 10-Bolt, GM 14-Bolt, Dana 80\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSteering System\u003c\/td\u003e\n\u003ctd\u003eFull Hydraulic Steering\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned specifically for PSC 2.5\" x 8\" double-ended steering cylinders.\u003c\/li\u003e\n\u003cli\u003eCompatible with one or two pairs of steering ram clamps (sold separately).\u003c\/li\u003e\n\u003cli\u003eThe included DOM cross tube can be trimmed to match custom axle widths before welding.\u003c\/li\u003e\n\u003cli\u003eProper ram placement, steering geometry, and axle clearance should be verified before final welding.\u003c\/li\u003e\n\u003cli\u003eIntended for experienced builders fabricating custom hydraulic steering systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ch3\u003e1. Why is steering ram placement important?\u003c\/h3\u003e\n\u003cp\u003eThe steering ram should remain as parallel to the tie rod as possible throughout suspension travel. Proper placement minimizes bump steer, prevents cylinder bind, and keeps steering loads distributed evenly across the axle.\u003c\/p\u003e\n\u003ch3\u003e2. Why use a pre-bent DOM cross tube?\u003c\/h3\u003e\n\u003cp\u003eThe pre-bent DOM tube provides excellent strength while allowing clearance for differential housings, suspension components, and steering links. The included sleeve lets builders fine-tune the overall width before completing the welds.\u003c\/p\u003e\n\u003ch3\u003e3. Can this kit be used with hydraulic assist steering?\u003c\/h3\u003e\n\u003cp\u003eNo. This mount is designed around a PSC 2.5\" x 8\" double-ended steering cylinder used in full hydraulic steering systems. Hydraulic assist steering uses a different style of cylinder and mounting arrangement.\u003c\/p\u003e\n\u003ch3\u003e4. Why are gussets included?\u003c\/h3\u003e\n\u003cp\u003eHydraulic steering cylinders generate substantial steering loads during rock crawling and competition use. The laser-cut gussets reinforce the mounting structure, reducing flex and helping distribute forces into the cross tube.\u003c\/p\u003e\n\u003ch3\u003e5. What should be checked before final welding?\u003c\/h3\u003e\n\u003cp\u003eCycle the suspension and steering through their full range of motion to verify cylinder travel, tie rod clearance, differential clearance, steering arm alignment, and chassis interference before permanently welding the mount to the axle housing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e","brand":"Wide Open Design","offers":[{"title":"Default Title","offer_id":54639914025235,"sku":"WF03031","price":209.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/WF03031-Steering-Ram-Mount-Kit-1_09431f05-9a87-4124-834f-898d37288ed8.jpg?v=1788281274"},{"product_id":"14-bolt-tie-in-with-pinion-guard","title":"WOD GM 14-Bolt Pinion Guard \u0026 Truss Tie-In","description":"\u003cp\u003eThe \u003cstrong\u003eWide Open Design GM 14-Bolt Pinion Tie-In with Pinion Guard\u003c\/strong\u003e reinforces and protects one of the most vulnerable areas of a GM 14-Bolt axle. Manufactured from 3\/8\" and 1\/4\" steel plate, this weld-together kit connects the pinion area to the axle truss, creating a more rigid structure while shielding the yoke, U-joint, and pinion support from rocks, ledges, and trail impacts.\u003c\/p\u003e\n\u003cp\u003eThe 3\/8\" pinion guard is drilled and tapped to simplify installation and service without requiring separate backing nuts. Its contoured design provides clearance for 1350, 1410, and 1480 yokes, making it a strong choice for rock bouncers, crawlers, Ultra4 cars, and heavy-duty trail rigs using a Wide Open Design 14-Bolt truss.\u003c\/p\u003e\n\u003ch4\u003eIncludes:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Wide Open Design Pinion Tie-In\u003c\/li\u003e\n\u003cli\u003e(1) 3\/8\" Steel Pinion Guard\u003c\/li\u003e\n\u003cli\u003e(9) Mounting Bolts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eWide Open Design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003ePinion Guard and Truss Tie-In Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Application\u003c\/td\u003e\n\u003ctd\u003eGM 14-Bolt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTie-In Material\u003c\/td\u003e\n\u003ctd\u003e1\/4\" Steel Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePinion Guard Material\u003c\/td\u003e\n\u003ctd\u003e3\/8\" Steel Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePinion Guard Design\u003c\/td\u003e\n\u003ctd\u003eDrilled and Tapped Back Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eYoke Clearance\u003c\/td\u003e\n\u003ctd\u003e1350, 1410, and 1480\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eWeld-Together \/ Weld-On\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Truss Compatibility\u003c\/td\u003e\n\u003ctd\u003eWide Open Design GM 14-Bolt Truss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOther Truss Compatibility\u003c\/td\u003e\n\u003ctd\u003ePossible with Custom Modification\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHardware\u003c\/td\u003e\n\u003ctd\u003e(9) Bolts Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eMade in the USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003cth\u003eCompatibility\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Platform\u003c\/td\u003e\n\u003ctd\u003eGM 14-Bolt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Truss System\u003c\/td\u003e\n\u003ctd\u003eWide Open Design 14-Bolt Truss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eYoke Size\u003c\/td\u003e\n\u003ctd\u003e1350, 1410, or 1480\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Application\u003c\/td\u003e\n\u003ctd\u003eUniversal Custom Off-Road Fabrication\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned specifically around Wide Open Design GM 14-Bolt truss systems.\u003c\/li\u003e\n\u003cli\u003eMay be adapted to other axle trusses with trimming, fitting, or custom fabrication.\u003c\/li\u003e\n\u003cli\u003eProvides clearance for 1350, 1410, and 1480 yokes.\u003c\/li\u003e\n\u003cli\u003eSuitable for front or rear custom 14-Bolt axle builds when truss and driveline clearance allow.\u003c\/li\u003e\n\u003cli\u003eWelding and final fitting are required.\u003c\/li\u003e\n\u003cli\u003eVerify pinion angle, driveshaft clearance, suspension travel, and yoke dimensions before final welding.\u003c\/li\u003e\n\u003cli\u003eProfessional fabrication and welding are recommended.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCommon Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eRock bouncers\u003c\/li\u003e\n\u003cli\u003eRock crawlers\u003c\/li\u003e\n\u003cli\u003eUltra4 race vehicles\u003c\/li\u003e\n\u003cli\u003eHeavy-duty trail rigs\u003c\/li\u003e\n\u003cli\u003eCustom tube chassis builds\u003c\/li\u003e\n\u003cli\u003eHigh-horsepower GM 14-Bolt axle applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eTech Insight\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ch3\u003eWhat does the pinion tie-in do?\u003c\/h3\u003e\n\u003cp\u003eThe tie-in connects the pinion support area to the axle truss, allowing impact and drivetrain loads to be distributed through a larger portion of the housing instead of being concentrated at the pinion nose.\u003c\/p\u003e\n\u003ch3\u003eWhy is the pinion area vulnerable off-road?\u003c\/h3\u003e\n\u003cp\u003eThe yoke, U-joint, and pinion support often sit low and forward on the axle housing, leaving them exposed to rocks, ledges, and hard landings. A direct hit can damage the yoke, driveshaft, pinion bearings, or housing.\u003c\/p\u003e\n\u003ch3\u003eWhat is the benefit of a drilled and tapped guard?\u003c\/h3\u003e\n\u003cp\u003eThe tapped 3\/8\" back plate allows the bolts to thread directly into the guard. This eliminates loose nuts behind the assembly, simplifies removal, and makes trail-side or shop service easier.\u003c\/p\u003e\n\u003ch3\u003eWill this guard clear a 1480 yoke?\u003c\/h3\u003e\n\u003cp\u003eYes. The guard is designed to provide clearance for 1350, 1410, and 1480 yokes. Final driveshaft angle and operating clearance should still be checked throughout the full suspension cycle.\u003c\/p\u003e\n\u003ch3\u003eWhy tie the guard into the truss instead of mounting it only near the pinion?\u003c\/h3\u003e\n\u003cp\u003eA guard mounted only at the pinion can transfer impact directly into the pinion support. Tying the guard into the truss creates a stronger load path that helps spread impact forces across the reinforced axle structure.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e","brand":"Wide Open Design","offers":[{"title":"Default Title","offer_id":54639914123539,"sku":"WA04080","price":115.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/WA04080-14-Bolt-Tie-In-Pinion-Guard-1.jpg?v=1788281248"},{"product_id":"rear-universal-axle-truss","title":"WOD Universal Rear Axle Truss","description":"\u003cp\u003eThe \u003cstrong\u003eWide Open Design Universal Rear Axle Truss\u003c\/strong\u003e is engineered to reinforce rear axle housings subjected to extreme horsepower, oversized tires, and punishing off-road terrain. Manufactured from heavy-duty 1\/4\" cold rolled steel, this universal truss significantly increases axle housing rigidity while helping reduce tube flex during rock crawling, Ultra4 racing, mud racing, trail riding, and high-performance street applications.\u003c\/p\u003e\n\u003cp\u003eDesigned to fit a wide range of popular rear axle housings—including D\u003cstrong\u003eana 44, Dana 60, Dana 70, Dana 80, and GM 14-Bolt axles\u003c\/strong\u003e—the precision-cut profile provides excellent weld contact for a strong, durable installation. Whether you're building a custom axle from scratch or reinforcing an existing housing, this Made-in-USA truss is an ideal foundation for demanding off-road builds.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Wide Open Design Universal Rear Axle Truss\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eWide Open Design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eUniversal Rear Axle Truss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e1\/4\" Cold Rolled Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e34.125\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e7.50\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e2.50\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDesign\u003c\/td\u003e\n\u003ctd\u003ePrecision-cut and contoured for maximum weld contact\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eWeld-On\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eRaw Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eMade in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003cp\u003e\u003cstrong\u003eUniversal Rear Axle Fitment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDana 44 Rear Axles\u003c\/li\u003e\n\u003cli\u003eDana 60 Rear Axles\u003c\/li\u003e\n\u003cli\u003eDana 70 Rear Axles\u003c\/li\u003e\n\u003cli\u003eDana 80 Rear Axles\u003c\/li\u003e\n\u003cli\u003eGM 14-Bolt Rear Axles\u003c\/li\u003e\n\u003cli\u003eCustom Fabricated Rear Axle Housings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for universal rear axle applications.\u003c\/li\u003e\n\u003cli\u003eWelding and final fitting are required.\u003c\/li\u003e\n\u003cli\u003eMay require trimming depending on axle housing design and suspension brackets.\u003c\/li\u003e\n\u003cli\u003eIdeal for rock crawlers, Ultra4 cars, race trucks, trail rigs, and custom fabrication projects.\u003c\/li\u003e\n\u003cli\u003eCompatible with additional axle reinforcement components such as pinion guards and axle tube gussets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ch3\u003eWhy install an axle truss?\u003c\/h3\u003e\n\u003cp\u003eLarge tires, high horsepower, lockers, and aggressive off-road driving place tremendous stress on axle housings. A properly designed truss helps reduce axle tube flex, minimizes housing deflection, and maintains more consistent ring-and-pinion alignment under load.\u003c\/p\u003e\n\u003ch3\u003eWhat is axle \"smiling\"?\u003c\/h3\u003e\n\u003cp\u003e\"Smiling\" describes the permanent upward bending of axle tubes caused by repeated high-torque loads and hard impacts. Once an axle housing bends, gear setup, bearing preload, and axle shaft alignment can all be affected. A heavy-duty truss helps resist this type of deformation.\u003c\/p\u003e\n\u003ch3\u003eWhy is a truss important on a GM 14-Bolt?\u003c\/h3\u003e\n\u003cp\u003eAlthough the GM 14-Bolt is one of the strongest production rear axles available, extreme rock crawling and competition use can still cause axle tube movement where the tubes are pressed and plug-welded into the center section. Pairing this truss with a pinion guard and housing tie-ins helps create a rigid boxed structure that better distributes suspension and drivetrain loads.\u003c\/p\u003e\n\u003ch3\u003eCan this truss be modified for custom applications?\u003c\/h3\u003e\n\u003cp\u003eYes. Because it is supplied as a weld-on universal truss, builders can trim or notch the truss as needed to clear suspension brackets, link mounts, shock mounts, or custom chassis components while maintaining excellent reinforcement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e","brand":"Wide Open Design","offers":[{"title":"Default Title","offer_id":54639914483987,"sku":"WF03012","price":299.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/WF03012-Rear-Universal-Axle-Truss-Weld-On-1_0b4be6c7-c5d1-454b-84b7-d674673f7c1d.jpg?v=1792013025"},{"product_id":"14-bolt-drivers-drop-front-truss","title":"WOD GM 14-Bolt Driver Drop Front Axle Truss","description":"\u003cp\u003eThe \u003cstrong\u003eWide Open Design GM 14-Bolt Driver Drop Front Axle Truss\u003c\/strong\u003e reinforces driver-side drop 14-Bolt steering axle housings used in high-horsepower off-road and competition builds. Manufactured by \u003cstrong\u003eWide Open Design\u003c\/strong\u003e from 1\/4\" steel plate, the truss is precision cut and contoured around the differential housing to increase weld contact, strengthen the long-side tube area, and reduce housing movement under hard steering, suspension, and drivetrain loads.\u003c\/p\u003e\n\n\u003cp\u003eChoose a fully welded, made-to-order truss or a flat plate kit for builders who prefer to assemble and weld the structure themselves. Optional suspension and steering tabs can be added to support custom link geometry, shock placement, and hydraulic steering layouts on rock crawlers, rock bouncers, Ultra4 cars, and fabricated tube-chassis vehicles.\u003c\/p\u003e\n\n\u003ch4\u003eOrdering Options:\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eFully Welded Truss – Made to Order\u003c\/li\u003e\n  \u003cli\u003eFlat Plate Kit – DIY Weld-It-Yourself\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eIncludes:\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e(1) Wide Open Design 14-Bolt Driver Drop Front Axle Truss\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eLead Time:\u003c\/strong\u003e Fully welded trusses are made to order and require approximately 2 business days before shipping.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n  \u003csummary class=\"details__header\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\n  \u003cdiv class=\"details-content rte\"\u003e\n    \u003ctable class=\"custom-specs-table\"\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003cth\u003eSpecification\u003c\/th\u003e\n          \u003cth\u003eDetails\u003c\/th\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eManufacturer\u003c\/td\u003e\n          \u003ctd\u003eWide Open Design\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003ePart Number\u003c\/td\u003e\n          \u003ctd\u003eNot Provided\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eProduct Type\u003c\/td\u003e\n          \u003ctd\u003eFront Axle Truss\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eAxle Application\u003c\/td\u003e\n          \u003ctd\u003eGM 14-Bolt Driver Drop Front Steering Axle\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMaterial\u003c\/td\u003e\n          \u003ctd\u003e1\/4\" Steel Plate\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eLength\u003c\/td\u003e\n          \u003ctd\u003e41.451\"\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eHeight\u003c\/td\u003e\n          \u003ctd\u003e6.126\"\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eDepth\u003c\/td\u003e\n          \u003ctd\u003e2.50\"\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eDesign\u003c\/td\u003e\n          \u003ctd\u003ePrecision Cut and Contoured for GM 14-Bolt Housing\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eInstallation Options\u003c\/td\u003e\n          \u003ctd\u003eFully Welded or DIY Flat Plate Kit\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eInstallation Type\u003c\/td\u003e\n          \u003ctd\u003eWeld-On\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eCountry of Origin\u003c\/td\u003e\n          \u003ctd\u003eMade in the USA\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n  \u003csummary class=\"details__header\"\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\n  \u003cdiv class=\"details-content rte\"\u003e\n    \u003ctable class=\"custom-specs-table\"\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003cth\u003eApplication\u003c\/th\u003e\n          \u003cth\u003eCompatibility\u003c\/th\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eAxle Platform\u003c\/td\u003e\n          \u003ctd\u003eGM 14-Bolt Front Steering Axle\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eDifferential Orientation\u003c\/td\u003e\n          \u003ctd\u003eDriver-Side Drop\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eVehicle Application\u003c\/td\u003e\n          \u003ctd\u003eUniversal Custom Off-Road Fabrication\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eCommon Builds\u003c\/td\u003e\n          \u003ctd\u003eRock Crawlers, Rock Bouncers, Ultra4 Cars, and Competition Buggies\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n\n    \u003ch3\u003eFitment Notes\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eDesigned specifically for driver-drop GM 14-Bolt front steering axle housings.\u003c\/li\u003e\n      \u003cli\u003eNot intended for passenger-drop axle configurations without significant modification.\u003c\/li\u003e\n      \u003cli\u003eThe DIY flat plate version requires assembly, fitting, and welding.\u003c\/li\u003e\n      \u003cli\u003eThe fully welded option still requires final fitting and welding to the axle housing.\u003c\/li\u003e\n      \u003cli\u003eSuspension brackets, steering mounts, pinion guards, and housing tie-ins are not included unless selected separately.\u003c\/li\u003e\n      \u003cli\u003eVerify differential orientation, axle width, tube placement, suspension geometry, and steering clearance before installation.\u003c\/li\u003e\n      \u003cli\u003eProfessional axle setup and welding are recommended.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n  \u003csummary class=\"details__header\"\u003e\u003cstrong\u003eTech Insight\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\n  \u003cdiv class=\"details-content rte\"\u003e\n    \u003ch3\u003eWhat does a front axle truss do?\u003c\/h3\u003e\n    \u003cp\u003eA front axle truss connects the differential housing and axle tubes into a more rigid structure. This helps reduce tube flex, housing distortion, and movement where the tubes enter the center section under steering, suspension, and drivetrain loads.\u003c\/p\u003e\n\n    \u003ch3\u003eWhy is the long side of a driver-drop axle vulnerable?\u003c\/h3\u003e\n    \u003cp\u003eThe longer axle tube has more leverage acting against it during hard landings, side loading, and hydraulic steering input. Reinforcing that area helps reduce bending and supports more consistent axle shaft and steering geometry.\u003c\/p\u003e\n\n    \u003ch3\u003eWhat is the difference between the welded and flat plate options?\u003c\/h3\u003e\n    \u003cp\u003eThe fully welded option arrives assembled and ready for final fitting to the axle housing. The flat plate kit is supplied as individual components for builders who want to control assembly, weld sequence, and integration with their suspension mounts.\u003c\/p\u003e\n\n    \u003ch3\u003eShould the truss be installed before suspension brackets?\u003c\/h3\u003e\n    \u003cp\u003eIn most custom builds, it is best to establish axle width, pinion angle, caster, steering placement, and suspension geometry before permanently welding the truss and related brackets. Planning the entire axle package together helps prevent clearance conflicts.\u003c\/p\u003e\n\n    \u003ch3\u003eShould this truss be paired with a pinion guard or housing tie-in?\u003c\/h3\u003e\n    \u003cp\u003eFor extreme rock crawling and competition use, a pinion guard and center-section tie-in can provide additional protection and help distribute impact and suspension loads across more of the axle housing.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e","brand":"Wide Open Design","offers":[{"title":"Welded (Made to Order)","offer_id":54639914549523,"sku":"WF03013","price":329.99,"currency_code":"USD","in_stock":true},{"title":"(DIY Weld-It-Yourself)","offer_id":54639914582291,"sku":"F021033","price":199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/WF03013-14-Bolt-Steel-Driver-Drop-Weld-On-Truss-1.jpg?v=1791830843"},{"product_id":"gm-dana-60-front-axle-truss","title":"WOD GM Dana 60 Front Axle Truss","description":"\u003cp\u003eThe Wide Open Design GM Dana 60 Front Axle Truss is engineered to strengthen General Motors and Dodge Dana 60 front axles used in demanding environments. Weld ready and built from 1\/4\" thick steel, this truss is precision cut and contoured to fit tightly to the Dana 60 differential housing for maximum weld surface area and long-term durability.\u003c\/p\u003e\n\u003cp\u003eBy extending across the majority of the long-side axle tube, this truss significantly reduces tube flex and housing distortion under hard use. It’s an ideal foundation for custom axle builds where strength, reliability, and clean fitment matter.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) GM\/Dodge Dana 60 Front Axle Truss\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" height=\"14\" width=\"14\"\u003e\u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M2.75 7H11.25\" class=\"vertical\"\u003e\u003c\/path\u003e\u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M7 2.75L7 11.25\" class=\"horizontal\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003cul\u003e\n\u003cli\u003eAxle Type: GM \/ Dodge Dana 60 Front\u003c\/li\u003e\n\u003cli\u003eMaterial: 1\/4\" Steel Plate\u003c\/li\u003e\n\u003cli\u003eLength: 41\"\u003c\/li\u003e\n\u003cli\u003eHeight: 6\"\u003c\/li\u003e\n\u003cli\u003eDepth: 2.5\"\u003c\/li\u003e\n\u003cli\u003eDesign: Cut and contoured for tight Dana 60 differential housing fit\u003c\/li\u003e\n\u003cli\u003eCountry of Origin: Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" height=\"14\" width=\"14\"\u003e\u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M2.75 7H11.25\" class=\"vertical\"\u003e\u003c\/path\u003e\u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M7 2.75L7 11.25\" class=\"horizontal\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003cul\u003e\n\u003cli\u003eGM Dana 60 Front Axles\u003c\/li\u003e\n\u003cli\u003eDodge Dana 60 Front Axles\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInstall Note:\u003c\/strong\u003e Welding required\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFitment Note: \u003c\/strong\u003eDesigned for custom, off-road, and competition axle builds\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eTech Insight\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" height=\"14\" width=\"14\"\u003e\u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M2.75 7H11.25\" class=\"vertical\"\u003e\u003c\/path\u003e\u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M7 2.75L7 11.25\" class=\"horizontal\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003cp\u003eDana 60 front housings experience extreme torsional and bending loads during off-road use, especially with larger tires and high horsepower drivetrains. This truss ties the differential housing into the long-side tube, helping prevent tube rotation and housing flex. Adding optional link tabs allows you to tailor the setup for custom suspension and steering geometry.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e","brand":"Wide Open Design","offers":[{"title":"Default Title","offer_id":54639914647827,"sku":"WF03015","price":329.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/WF03015-GM-Dana-60-Weld-On-Front-Axle-Truss-1_f3ae1622-a866-411f-8004-d5424e65d8ad.jpg?v=1792012996"},{"product_id":"late-ford-dana-60-front-axle-truss","title":"WOD Late Ford Dana 60 Front Axle Truss - Weld-On","description":"\u003cp\u003eThe \u003cstrong\u003eWOD Late Ford Dana 60 Front Axle Truss\u003c\/strong\u003e is engineered to reinforce late-model Ford Dana 60 front axle housings found in Super Duty trucks and custom off-road builds. Precision laser cut from heavy-duty 1\/4\" steel plate, the truss is contoured to closely match the differential housing and extends across most of the long-side axle tube, creating a rigid structure that helps reduce housing flex under extreme loads.\u003c\/p\u003e\n\u003cp\u003eWhether you're building a rock crawler, Ultra4 race car, rock bouncer, trail rig, or one-ton axle swap, this weld-on truss helps strengthen one of the most critical components in your suspension. By reducing axle tube deflection and housing distortion, it helps maintain suspension geometry, steering alignment, and overall axle durability in severe off-road conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) WOD Late Ford Dana 60 Front Axle Truss\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Welding is required. Verify axle configuration before ordering.\u003c\/p\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eWide Open Design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eFront Axle Truss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Compatibility\u003c\/td\u003e\n\u003ctd\u003eLate Ford Dana 60 Front Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e1\/4\" Steel Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e38.625\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e6.75\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e2.5\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003ePrecision Laser Cut\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation\u003c\/td\u003e\n\u003ctd\u003eWeld-On\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eMade in USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible Axles:\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eAxle\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-250 Super Duty\u003c\/td\u003e\n\u003ctd\u003e1999-2004\u003c\/td\u003e\n\u003ctd\u003eLate Dana 60 Front\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-350 Super Duty\u003c\/td\u003e\n\u003ctd\u003e1999-2004\u003c\/td\u003e\n\u003ctd\u003eLate Dana 60 Front\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eExcursion\u003c\/td\u003e\n\u003ctd\u003e2000-2005\u003c\/td\u003e\n\u003ctd\u003eLate Dana 60 Front\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned specifically for late-model Ford Dana 60 front axle housings.\u003c\/li\u003e\n\u003cli\u003eIdeal for one-ton axle swaps, custom off-road builds, Ultra4 race cars, rock bouncers, and trail rigs.\u003c\/li\u003e\n\u003cli\u003eVerify axle tube diameter, differential casting, steering configuration, and suspension clearance before welding.\u003c\/li\u003e\n\u003cli\u003eMinor fitting may be required depending on existing axle modifications.\u003c\/li\u003e\n\u003cli\u003eProfessional welding is recommended for maximum strength and proper fitment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ch3\u003eWhy install an axle truss?\u003c\/h3\u003e\n\u003cp\u003eLarge tires, locking differentials, high-horsepower engines, and aggressive off-road driving can cause the axle tubes to flex or rotate under load. An axle truss reinforces the housing, helping maintain proper alignment and reducing long-term fatigue.\u003c\/p\u003e\n\u003ch3\u003eWhy does this truss extend across the long-side axle tube?\u003c\/h3\u003e\n\u003cp\u003eThe long-side tube experiences the greatest bending loads during hard impacts and high-traction situations. Extending the truss across this section increases housing rigidity and distributes loads more evenly throughout the axle assembly.\u003c\/p\u003e\n\u003ch3\u003eWill this improve steering and suspension geometry?\u003c\/h3\u003e\n\u003cp\u003eBy reducing housing flex, the truss helps minimize unwanted movement that can affect caster, camber, and steering alignment during severe off-road use. A more rigid housing also helps suspension components operate more consistently.\u003c\/p\u003e\n\u003ch3\u003eDoes this fit all Dana 60 front axles?\u003c\/h3\u003e\n\u003cp\u003eNo. This truss is designed specifically for late-model Ford Dana 60 front axle housings. Earlier Ford, Dodge, GM, kingpin, and aftermarket Dana 60 housings use different castings and tube configurations.\u003c\/p\u003e\n\u003ch3\u003eCan it be installed with the axle still under the vehicle?\u003c\/h3\u003e\n\u003cp\u003eWhile possible in some applications, installation is generally easier with the axle removed. Proper preparation, fit-up, and controlled welding procedures help minimize housing distortion and produce the strongest finished installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e","brand":"Wide Open Design","offers":[{"title":"Default Title","offer_id":54639914713363,"sku":"WF03016","price":329.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/WF03016-Late-Ford-Dana-60-Weld-On-Front-Axle-Truss-1.jpg?v=1792012996"},{"product_id":"early-ford-dana-60-front-truss","title":"WOD Early Ford Dana 60 Front Axle Truss - Weld-On","description":"\n\u003cp\u003eThe \u003cstrong\u003eWOD Early Ford Dana 60 Front Axle Truss\u003c\/strong\u003e is a weld-on reinforcement designed to increase axle housing rigidity and reduce axle tube deflection in demanding off-road applications. Precision-cut from 1\/4\" steel plate, the truss is contoured to fit the differential housing and extend across the long-side axle tube, providing additional structural support where high steering, suspension, and drivetrain loads can stress the housing.\u003c\/p\u003e\n\n\u003cp\u003eDesigned for compatible Early Ford Dana 60 front axle housings, this heavy-duty truss helps distribute loads across a larger portion of the axle assembly. Its 38.625\" overall width provides reinforcement for rock crawlers, rock bouncers, trail rigs, and custom solid axle swaps running large tires, locking differentials, and high-torque drivetrains. Welding and final fitment are required, making it a practical upgrade for builders strengthening an existing axle or assembling a custom off-road front axle.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) WOD Early Ford Dana 60 Front Axle Truss\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Welding and custom fabrication are required. Verify your axle housing configuration, differential location, and suspension clearance before installation. This truss is designed for Early Ford Dana 60 front axle applications and should not be assumed to fit other Dana 60 housing configurations.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\n\u003cstrong\u003eSpecifications\u003c\/strong\u003e\n\u003cspan class=\"svg-wrapper icon-plus\"\u003e\n\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003c\/svg\u003e\n\u003c\/span\u003e\n\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eWide Open Design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eFront Axle Housing Truss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAxle Platform\u003c\/th\u003e\n\u003ctd\u003eEarly Ford Dana 60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAxle Position\u003c\/th\u003e\n\u003ctd\u003eFront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e1\/4\" Steel Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial Thickness\u003c\/th\u003e\n\u003ctd\u003e0.250\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall Width\u003c\/th\u003e\n\u003ctd\u003e38.625\" (38-5\/8\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall Height\u003c\/th\u003e\n\u003ctd\u003e6.75\" (6-3\/4\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOverall Depth\u003c\/th\u003e\n\u003ctd\u003e2.5\" (2-1\/2\")\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003ePrecision-Cut Steel Plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDesign\u003c\/th\u003e\n\u003ctd\u003eContoured Differential Housing Reinforcement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCoverage\u003c\/th\u003e\n\u003ctd\u003eDifferential Housing \u0026amp; Long-Side Axle Tube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInstallation Type\u003c\/th\u003e\n\u003ctd\u003eWeld-On \/ Custom Fabrication\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCondition\u003c\/th\u003e\n\u003ctd\u003eWeld-Ready\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePrimary Application\u003c\/th\u003e\n\u003ctd\u003eEarly Ford Dana 60 Front Axle Reinforcement for Off-Road \u0026amp; Custom Builds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCountry of Origin\u003c\/th\u003e\n\u003ctd\u003eMade in the USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eQuantity\u003c\/th\u003e\n\u003ctd\u003e(1) Axle Truss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e\u003cstrong\u003eDimensional Note:\u003c\/strong\u003e Measurements are based on the WOD Early Ford Dana 60 truss drawing. Verify available clearance around the axle housing, steering components, and suspension mounting locations before installation.\u003c\/p\u003e\n\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\n\u003cstrong\u003eFitment\u003c\/strong\u003e\n\u003cspan class=\"svg-wrapper icon-plus\"\u003e\n\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003c\/svg\u003e\n\u003c\/span\u003e\n\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003cth\u003eAxle Application\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-Series \/ Custom Builds\u003c\/td\u003e\n\u003ctd\u003eVerify Housing\u003c\/td\u003e\n\u003ctd\u003eCompatible Early Ford Dana 60 Front Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eCustom Off-Road Vehicles\u003c\/td\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eEarly Ford Dana 60 Front Axle Swap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e\u003cstrong\u003eAxle Compatibility:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for compatible Early Ford Dana 60 front axle housings.\u003c\/li\u003e\n\u003cli\u003eSuitable for custom solid axle swaps using the specified housing.\u003c\/li\u003e\n\u003cli\u003eIntended for front axle reinforcement applications.\u003c\/li\u003e\n\u003cli\u003eNot a universal fit for all Ford Dana 60 front axle generations.\u003c\/li\u003e\n\u003cli\u003eNot intended for Dana 44 or other axle platforms without substantial modification.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eCommon Applications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRock Crawlers \u0026amp; Rock Bouncers\u003c\/li\u003e\n\u003cli\u003eHeavy-Duty Trail Rigs\u003c\/li\u003e\n\u003cli\u003eCustom Ford Truck Builds\u003c\/li\u003e\n\u003cli\u003eTube-Chassis Off-Road Vehicles\u003c\/li\u003e\n\u003cli\u003eSolid Axle Swaps\u003c\/li\u003e\n\u003cli\u003eHigh-Torque Off-Road Builds\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eInstallation Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eVerify the axle housing is an Early Ford Dana 60 before ordering.\u003c\/li\u003e\n\u003cli\u003eConfirm differential housing shape, axle tube location, and available mounting clearance.\u003c\/li\u003e\n\u003cli\u003eMock up the truss before welding to verify proper contact with the housing and axle tube.\u003c\/li\u003e\n\u003cli\u003eCheck clearance around steering linkages, suspension brackets, spring mounts, and other axle-mounted components.\u003c\/li\u003e\n\u003cli\u003eRemove coatings, rust, and contaminants from welding surfaces before installation.\u003c\/li\u003e\n\u003cli\u003eTack weld and verify axle alignment before completing final welds.\u003c\/li\u003e\n\u003cli\u003eUse controlled welding procedures to reduce the risk of axle housing distortion.\u003c\/li\u003e\n\u003cli\u003eInspect axle tube alignment and housing straightness during fabrication.\u003c\/li\u003e\n\u003cli\u003eFinal trimming or fitting may be required for modified axle assemblies.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eBuilder Note:\u003c\/strong\u003e Axle trusses should be installed during the fabrication stage whenever possible, before suspension brackets, steering mounts, and other components limit access to the housing. Mock up the complete axle assembly and cycle the steering and suspension through their intended range of motion before final welding. Proper alignment and controlled heat input are important for maintaining axle housing integrity.\u003c\/p\u003e\n\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\n\u003cstrong\u003eFAQ\u003c\/strong\u003e\n\u003cspan class=\"svg-wrapper icon-plus\"\u003e\n\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003c\/svg\u003e\n\u003c\/span\u003e\n\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\n\u003ch3\u003eWhat does an axle truss do on a Dana 60?\u003c\/h3\u003e\n\u003cp\u003eAn axle truss reinforces the axle housing by distributing bending and torsional loads across a larger structural area. This helps increase housing rigidity and reduce axle tube deflection under demanding off-road conditions, especially when running larger tires, locking differentials, and high-torque drivetrains.\u003c\/p\u003e\n\n\u003ch3\u003eWill this truss fit every Ford Dana 60 front axle?\u003c\/h3\u003e\n\u003cp\u003eNo. This truss is designed specifically for compatible Early Ford Dana 60 front axle housings. Ford Dana 60 axles have been produced in different configurations, so verify the housing shape, differential location, and axle tube arrangement before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eWhat material is the WOD Early Ford Dana 60 truss made from?\u003c\/h3\u003e\n\u003cp\u003eThe truss is precision-cut from 1\/4\" thick steel plate for weld-on reinforcement of the axle housing and long-side axle tube.\u003c\/p\u003e\n\n\u003ch3\u003eWhat are the dimensions of the Early Ford Dana 60 axle truss?\u003c\/h3\u003e\n\u003cp\u003eThe truss measures 38.625\" wide, 6.75\" high, and 2.5\" deep according to the WOD product drawing. These dimensions should be checked against the available space around the axle and suspension components.\u003c\/p\u003e\n\n\u003ch3\u003eWhy does the truss extend across the long-side axle tube?\u003c\/h3\u003e\n\u003cp\u003eThe longer axle tube has a greater unsupported span and can experience increased bending loads during aggressive off-road use. Extending reinforcement across this section helps distribute stress and improve overall housing rigidity.\u003c\/p\u003e\n\n\u003ch3\u003eDoes the WOD Dana 60 axle truss require welding?\u003c\/h3\u003e\n\u003cp\u003eYes. This is a weld-on reinforcement component that requires proper fitting, surface preparation, and welding. Professional fabrication is recommended to maintain axle alignment and prevent heat-related housing distortion.\u003c\/p\u003e\n\n\u003ch3\u003eCan this truss be used on a custom solid axle swap?\u003c\/h3\u003e\n\u003cp\u003eYes. It can be used in custom off-road builds and solid axle swaps equipped with a compatible Early Ford Dana 60 front axle housing. Vehicle-specific suspension and steering clearance must be verified during installation.\u003c\/p\u003e\n\n\u003ch3\u003eWill an axle truss help prevent axle tube bending?\u003c\/h3\u003e\n\u003cp\u003eA properly installed truss increases structural support and helps resist axle housing deflection under load. However, it cannot guarantee that the axle housing will never bend or fail under extreme impacts or operating conditions.\u003c\/p\u003e\n\n\u003ch3\u003eCan the truss help prevent axle tubes from rotating in the differential housing?\u003c\/h3\u003e\n\u003cp\u003eBy reinforcing the connection between the differential housing and axle tube, a properly fitted and welded truss can help reduce movement at this junction. Proper weld preparation, penetration, and axle housing condition are critical to the effectiveness of the reinforcement.\u003c\/p\u003e\n\n\u003ch3\u003eShould I install the truss before welding suspension brackets?\u003c\/h3\u003e\n\u003cp\u003eWhenever possible, install and mock up the truss during the early fabrication stage. This allows easier access to the axle housing and helps ensure adequate clearance for suspension brackets, steering components, and other axle-mounted hardware before final welding.\u003c\/p\u003e\n\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e\n","brand":"Wide Open Design","offers":[{"title":"Default Title","offer_id":54639914778899,"sku":"WF03017","price":344.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/WF03016-Late-Ford-Dana-60-Weld-On-Front-Axle-Truss-1_26feb35b-24e4-4a31-9ad6-adb49a5b3986.jpg?v=1792013022"},{"product_id":"crane-axle-revolution-30-35-spline-gm-14-bolt-inner-axle-seal-kit","title":"Crane Axle Revolution GM 14-Bolt 30\/35-Spline Inner Axle Seal Kit","description":"\u003cp\u003eThe \u003cstrong\u003eCrane Axle Revolution GM 14-Bolt 30\/35-Spline Inner Axle Seal Kit\u003c\/strong\u003e is designed to seal custom GM 14-Bolt steering axles using 30-spline or 35-spline axle shafts. The Revolution system replaces the factory carrier bearing preload spanners with precision-machined seal housings that accept readily available Dana 60 inner axle seals.\u003c\/p\u003e\n\n\u003cp\u003ePositioning the axle seals near the differential places the sealing surface where axle shaft movement is reduced compared to sealing farther out in the axle tube. This gives custom front-steer and rear-steer 14-Bolt builders a clean, serviceable way to contain differential oil while helping keep water, mud, and debris out of the housing. Using a common Dana 60 inner axle seal also makes replacement parts easier to source when the axle needs to be serviced.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRevolution 14 Seal Housing Spanners\u003c\/li\u003e\n\u003cli\u003eRevolution 14 Inner Axle Seals\u003c\/li\u003e\n\u003cli\u003eThread Sealant\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" height=\"14\" width=\"14\"\u003e\n\u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M2.75 7H11.25\" class=\"vertical\"\u003e\u003c\/path\u003e\n\u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M7 2.75L7 11.25\" class=\"horizontal\"\u003e\u003c\/path\u003e\n\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\n\u003cdiv class=\"details-content rte\"\u003e\n\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eCrane Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eInner Axle Seal Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Platform\u003c\/td\u003e\n\u003ctd\u003eGM 14-Bolt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Application\u003c\/td\u003e\n\u003ctd\u003eGM 14-Bolt Steering Axles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Shaft Compatibility\u003c\/td\u003e\n\u003ctd\u003e30-Spline \u0026amp; 35-Spline\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeal Housing Material\u003c\/td\u003e\n\u003ctd\u003e1018 Cold-Rolled Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeal Type\u003c\/td\u003e\n\u003ctd\u003eDana 60-Style Inner Axle Seal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeal Position\u003c\/td\u003e\n\u003ctd\u003eInternal \/ Near Differential\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFactory Component Replaced\u003c\/td\u003e\n\u003ctd\u003eCarrier Bearing Preload Spanners\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation Type\u003c\/td\u003e\n\u003ctd\u003eSteering Axle Conversion \/ Differential Assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturing\u003c\/td\u003e\n\u003ctd\u003ePrecision Machined in the USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" height=\"14\" width=\"14\"\u003e\n\u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M2.75 7H11.25\" class=\"vertical\"\u003e\u003c\/path\u003e\n\u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M7 2.75L7 11.25\" class=\"horizontal\"\u003e\u003c\/path\u003e\n\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\n\u003cdiv class=\"details-content rte\"\u003e\n\n\u003cp\u003e\u003cstrong\u003eDesigned For:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGM 14-Bolt steering axle assemblies\u003c\/li\u003e\n\u003cli\u003e30-spline axle shafts\u003c\/li\u003e\n\u003cli\u003e35-spline axle shafts\u003c\/li\u003e\n\u003cli\u003eCustom front-steer 14-Bolt axle builds\u003c\/li\u003e\n\u003cli\u003eCustom rear-steer 14-Bolt axle builds\u003c\/li\u003e\n\u003cli\u003eRock crawlers and rock bouncers\u003c\/li\u003e\n\u003cli\u003eUltra4 and competition axle builds\u003c\/li\u003e\n\u003cli\u003eCustom fabricated steering axles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned specifically for GM 14-Bolt steering axle applications\u003c\/li\u003e\n\u003cli\u003eCompatible with 30-spline and 35-spline axle shaft configurations\u003c\/li\u003e\n\u003cli\u003eUses Dana 60-style inner axle seals\u003c\/li\u003e\n\u003cli\u003eReplaces the factory GM 14-Bolt carrier bearing preload spanners\u003c\/li\u003e\n\u003cli\u003ePositions the axle seals near the differential where axle shaft movement is reduced\u003c\/li\u003e\n\u003cli\u003eVerify axle shaft diameter, differential configuration, and complete axle setup before installation\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNot compatible with 40-spline axle shafts — 40-spline version sold separately\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" height=\"14\" width=\"14\"\u003e\n\u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M2.75 7H11.25\" class=\"vertical\"\u003e\u003c\/path\u003e\n\u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M7 2.75L7 11.25\" class=\"horizontal\"\u003e\u003c\/path\u003e\n\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\n\u003cdiv class=\"details-content rte\"\u003e\n\n\u003ch4\u003eWhat does the Revolution 14-Bolt inner axle seal kit do?\u003c\/h4\u003e\n\u003cp\u003eThe kit replaces the factory carrier bearing preload spanners with machined seal housings that accept inner axle seals. This allows a GM 14-Bolt differential to be configured for steering axle use while helping contain gear oil and keep contamination out of the housing.\u003c\/p\u003e\n\n\u003ch4\u003eWhy are the axle seals positioned near the differential?\u003c\/h4\u003e\n\u003cp\u003eAxle shaft movement is generally reduced near the differential compared with farther out in the axle tube. Locating the seal closer to the differential creates a more stable sealing surface and helps improve seal life in steering axle applications.\u003c\/p\u003e\n\n\u003ch4\u003eWhat axle shaft sizes does this kit fit?\u003c\/h4\u003e\n\u003cp\u003eThis version is designed for 30-spline and 35-spline GM 14-Bolt steering axle configurations. A separate 40-spline version is available for larger axle shaft systems.\u003c\/p\u003e\n\n\u003ch4\u003eWhat seals does the kit use?\u003c\/h4\u003e\n\u003cp\u003eThe Revolution system uses common Dana 60-style inner axle seals. This makes replacement seals easier to source compared with using a proprietary or custom seal arrangement.\u003c\/p\u003e\n\n\u003ch4\u003eCan this kit be used in a rear-steer 14-Bolt?\u003c\/h4\u003e\n\u003cp\u003eYes. The seal system is designed around a steering 14-Bolt axle configuration, so it can be used in either front-steer or rear-steer applications as long as the axle shaft and differential setup are compatible.\u003c\/p\u003e\n\n\u003ch4\u003eDoes this replace the factory carrier bearing preload spanners?\u003c\/h4\u003e\n\u003cp\u003eYes. The machined seal housing spanners replace the factory preload spanners while providing a location for the inner axle seals.\u003c\/p\u003e\n\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e","brand":"Crane Axle","offers":[{"title":"Default Title","offer_id":54639923429651,"sku":"CAREV14","price":190.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/CAREV14-Rev-30_35-Spline-GM-14-Bolt-Axle-Seal-Kit-1_14c8a6ed-3f5b-494b-8bbf-936a4babf199.jpg?v=1788281298"},{"product_id":"crane-axle-40-spline-14-bolt-inner-seal-kit","title":"Crane Axle Revolution GM 14-Bolt 40-Spline Inner Axle Seal Kit","description":"\u003cp\u003eThe \u003cstrong\u003eCrane Axle Revolution GM 14-Bolt 40-Spline Inner Axle Seal Kit\u003c\/strong\u003e is designed to seal custom GM 14-Bolt steering axles using 40-spline axle shafts. The Revolution system replaces the factory carrier bearing preload spanners with precision-machined seal housing spanners that create an internal seal location near the differential.\u003c\/p\u003e\n\n\u003cp\u003eMoving the seal inward places it where axle shaft movement is reduced, helping improve sealing reliability in high-articulation steering axle applications. The included axle guides help center the large 40-spline shafts during assembly and reduce the chance of damaging the seals during installation, while the complete system installs without requiring custom machining.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Revolution GM 14-Bolt Seal Housing Spanners\u003c\/li\u003e\n\u003cli\u003e(2) Revolution GM 14-Bolt Inner Axle Seals\u003c\/li\u003e\n\u003cli\u003e(2) Axle Guides\u003c\/li\u003e\n\u003cli\u003eThread Sealant\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Designed for 40-spline GM 14-Bolt steering axle applications only.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" height=\"14\" width=\"14\"\u003e\n\u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M2.75 7H11.25\" class=\"vertical\"\u003e\u003c\/path\u003e\n\u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M7 2.75L7 11.25\" class=\"horizontal\"\u003e\u003c\/path\u003e\n\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\n\u003cdiv class=\"details-content rte\"\u003e\n\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eCrane Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eInner Axle Seal Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Platform\u003c\/td\u003e\n\u003ctd\u003eGM 14-Bolt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Application\u003c\/td\u003e\n\u003ctd\u003eGM 14-Bolt Steering Axles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Shaft Compatibility\u003c\/td\u003e\n\u003ctd\u003e40-Spline\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeal Housing Material\u003c\/td\u003e\n\u003ctd\u003e1018 Cold-Rolled Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeal Position\u003c\/td\u003e\n\u003ctd\u003eInternal \/ Near Differential\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFactory Component Replaced\u003c\/td\u003e\n\u003ctd\u003eCarrier Bearing Preload Spanners\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Guides\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCustom Machining Required\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation Type\u003c\/td\u003e\n\u003ctd\u003eSteering Axle Conversion \/ Differential Assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturing\u003c\/td\u003e\n\u003ctd\u003ePrecision Machined in the USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" height=\"14\" width=\"14\"\u003e\n\u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M2.75 7H11.25\" class=\"vertical\"\u003e\u003c\/path\u003e\n\u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M7 2.75L7 11.25\" class=\"horizontal\"\u003e\u003c\/path\u003e\n\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\n\u003cdiv class=\"details-content rte\"\u003e\n\n\u003cp\u003e\u003cstrong\u003eDesigned For:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGM 14-Bolt steering axle assemblies\u003c\/li\u003e\n\u003cli\u003e40-spline axle shafts\u003c\/li\u003e\n\u003cli\u003eCustom front-steer 14-Bolt axle builds\u003c\/li\u003e\n\u003cli\u003eCustom rear-steer 14-Bolt axle builds\u003c\/li\u003e\n\u003cli\u003eRock crawlers and rock bouncers\u003c\/li\u003e\n\u003cli\u003eUltra4 and competition axle builds\u003c\/li\u003e\n\u003cli\u003eCustom fabricated steering axles\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned specifically for 40-spline GM 14-Bolt steering axle configurations\u003c\/li\u003e\n\u003cli\u003eReplaces the factory GM 14-Bolt carrier bearing preload spanners\u003c\/li\u003e\n\u003cli\u003ePositions the axle seals near the differential where axle shaft movement is reduced\u003c\/li\u003e\n\u003cli\u003eIncluded axle guides help align the shaft through the seal during assembly\u003c\/li\u003e\n\u003cli\u003eNo custom machining is required for properly configured applications\u003c\/li\u003e\n\u003cli\u003eRequires a GM 14-Bolt carrier preload spanner configuration\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNot compatible with 30-spline or 35-spline axle shaft setups\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" height=\"14\" width=\"14\"\u003e\n\u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M2.75 7H11.25\" class=\"vertical\"\u003e\u003c\/path\u003e\n\u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M7 2.75L7 11.25\" class=\"horizontal\"\u003e\u003c\/path\u003e\n\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\n\u003cdiv class=\"details-content rte\"\u003e\n\n\u003ch4\u003eWhat does the Revolution 40-spline seal system do?\u003c\/h4\u003e\n\u003cp\u003eThe system replaces the factory carrier bearing preload spanners with machined seal housings that create an internal axle seal location. This allows a GM 14-Bolt differential to be configured for 40-spline steering axle use while helping contain gear oil and keep contamination out of the housing.\u003c\/p\u003e\n\n\u003ch4\u003eWhy are the seals positioned near the differential?\u003c\/h4\u003e\n\u003cp\u003eAxle shaft movement is reduced closer to the differential compared with farther out in the axle tube. Positioning the seal in this area creates a more stable sealing surface and helps improve long-term seal performance in steering axle applications.\u003c\/p\u003e\n\n\u003ch4\u003eWhy are axle guides included?\u003c\/h4\u003e\n\u003cp\u003eThe larger 40-spline axle shafts can be difficult to guide through an internal seal during assembly. The included axle guides help center the shaft as it passes through the seal, reducing the chance of cutting, folding, or damaging the sealing lip.\u003c\/p\u003e\n\n\u003ch4\u003eDoes this kit require machining?\u003c\/h4\u003e\n\u003cp\u003eNo. The Revolution system is designed as a direct replacement for the factory carrier bearing preload spanners in properly configured GM 14-Bolt steering axle assemblies.\u003c\/p\u003e\n\n\u003ch4\u003eCan this kit be used in a rear-steer GM 14-Bolt?\u003c\/h4\u003e\n\u003cp\u003eYes. The seal system is designed around steering axle use and can be used in either front-steer or rear-steer applications as long as the axle is built around the compatible 40-spline GM 14-Bolt configuration.\u003c\/p\u003e\n\n\u003ch4\u003eWill this kit work with 30-spline or 35-spline axle shafts?\u003c\/h4\u003e\n\u003cp\u003eNo. This version is specifically designed for 40-spline axle shaft applications. The 30\/35-spline Revolution 14 seal kit is sold separately.\u003c\/p\u003e\n\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e","brand":"Crane Axle","offers":[{"title":"Default Title","offer_id":54639923527955,"sku":"CAREV1440","price":225.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/CAREV1440-Rev-40-Spline-GM-14-Bolt-Axle-Seal-Kit-1_b63f8671-8758-495d-a676-a13dacb8703a.jpg?v=1788281462"},{"product_id":"yukon-dana-60-61-master-overhaul-kit-front-diff","title":"Yukon Dana 60 \u0026 Dana 61 Master Overhaul Kit - Front Differential","description":"\u003cp\u003eThe \u003cstrong\u003eYukon Dana 60 \u0026amp; Dana 61 Front Master Overhaul Kit\u003c\/strong\u003e includes the bearings, races, seals, shims, and setup components needed to properly rebuild a compatible Dana 60 or Dana 61 front differential. Built around Timken bearings and races, this kit is designed for differential rebuilds, ring-and-pinion changes, locker installations, and other service where the critical wear components should be replaced rather than reused.\u003c\/p\u003e\n\u003cp\u003eA complete overhaul kit matters because bearing preload, pinion depth, backlash, and gear contact pattern all depend on the condition and adjustment of the differential components around the ring and pinion. Replacing worn bearings, seals, shims, and related hardware during the rebuild helps give the installer the parts needed to set the differential up correctly for long-term use in heavy-duty trucks, trail rigs, rock crawlers, and other high-load applications.\u003c\/p\u003e\n\u003ch4\u003eIncludes:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eCarrier Bearings \u0026amp; Races\u003c\/li\u003e\n\u003cli\u003ePinion Bearings \u0026amp; Races\u003c\/li\u003e\n\u003cli\u003ePinion Seal\u003c\/li\u003e\n\u003cli\u003eInner Axle Seals\u003c\/li\u003e\n\u003cli\u003eComplete Shim Kit\u003c\/li\u003e\n\u003cli\u003eRing Gear Bolts\u003c\/li\u003e\n\u003cli\u003ePinion Nut\u003c\/li\u003e\n\u003cli\u003eCrush Sleeve\u003c\/li\u003e\n\u003cli\u003eOil Baffles \u0026amp; Slingers\u003c\/li\u003e\n\u003cli\u003eThread Locker\u003c\/li\u003e\n\u003cli\u003eGear Marking Compound \u0026amp; Brush\u003c\/li\u003e\n\u003cli\u003eDifferential Gasket\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eYukon Gear \u0026amp; Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eMaster Differential Overhaul Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Platform\u003c\/td\u003e\n\u003ctd\u003eDana 60 \/ Dana 61\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Position\u003c\/td\u003e\n\u003ctd\u003eFront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotation\u003c\/td\u003e\n\u003ctd\u003eStandard \u0026amp; Reverse Rotation Applications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCarrier Bearings\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePinion Bearings\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBearing Manufacturer\u003c\/td\u003e\n\u003ctd\u003eTimken\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Axle Seals\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShim Kit\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRing Gear Bolts\u003c\/td\u003e\n\u003ctd\u003e\n\u003cmeta charset=\"utf-8\"\u003eQuantity 12 Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSetup Materials\u003c\/td\u003e\n\u003ctd\u003eThread Locker, Marking Compound \u0026amp; Brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInstallation Type\u003c\/td\u003e\n\u003ctd\u003eDifferential Rebuild \/ Gear Installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned For:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDana 60 front differentials\u003c\/li\u003e\n\u003cli\u003eDana 61 front differentials\u003c\/li\u003e\n\u003cli\u003eStandard-rotation front axle applications\u003c\/li\u003e\n\u003cli\u003eReverse-rotation front axle applications\u003c\/li\u003e\n\u003cli\u003eDifferential rebuilds\u003c\/li\u003e\n\u003cli\u003eRing-and-pinion installations\u003c\/li\u003e\n\u003cli\u003eLocker and carrier installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCommon Vehicle Applications Include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eK20 Suburban\u003c\/td\u003e\n\u003ctd\u003e1967–1969, 1971–1972\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eK30 \/ K30 Pickup\u003c\/td\u003e\n\u003ctd\u003e1971, 1973–1986\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eRam 2500\u003c\/td\u003e\n\u003ctd\u003e1995–2002\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eW200 \/ W250\u003c\/td\u003e\n\u003ctd\u003e1967–1993\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eW300 \/ W350\u003c\/td\u003e\n\u003ctd\u003e1960–1993\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-250 \/ F-250 Super Duty\u003c\/td\u003e\n\u003ctd\u003e1974–2013\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-350 \/ F-350 Super Duty\u003c\/td\u003e\n\u003ctd\u003e1979–2015\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-450 \/ F-550 Super Duty\u003c\/td\u003e\n\u003ctd\u003e2000–2004\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eK25 \/ K2500 Suburban\u003c\/td\u003e\n\u003ctd\u003e1968–1972\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eK35 \/ K3500 \/ V3500\u003c\/td\u003e\n\u003ctd\u003e1971–1987\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits compatible Dana 60 and Dana 61 front differential applications.\u003c\/li\u003e\n\u003cli\u003eCompatible with both standard-rotation and reverse-rotation axle assemblies where applicable.\u003c\/li\u003e\n\u003cli\u003eSome Dodge applications use Dana 61 front axle configurations.\u003c\/li\u003e\n\u003cli\u003eVehicle year and model alone do not guarantee axle fitment.\u003c\/li\u003e\n\u003cli\u003eMany older trucks have been axle-swapped or modified; verify the actual axle before ordering.\u003c\/li\u003e\n\u003cli\u003eVerify axle model, rotation, bearing configuration, and differential setup before installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ch3\u003eWhat is included in a master overhaul kit?\u003c\/h3\u003e\n\u003cp\u003eA master overhaul kit replaces the major wear and setup components used during a differential rebuild, including carrier bearings, pinion bearings, races, seals, shims, hardware, and gear setup materials.\u003c\/p\u003e\n\u003ch3\u003eWhen should I use a master overhaul kit?\u003c\/h3\u003e\n\u003cp\u003eA master kit is a good choice when replacing a ring and pinion, installing a locker or carrier, rebuilding a noisy differential, or servicing an axle with worn bearings and seals. Replacing the wear components at the same time gives the installer a better foundation for setting bearing preload, backlash, and gear contact pattern.\u003c\/p\u003e\n\u003ch3\u003eDoes this kit fit both Dana 60 and Dana 61 front axles?\u003c\/h3\u003e\n\u003cp\u003eYes. The supplied fitment information lists this kit for compatible Dana 60 and Dana 61 front differential applications. Verify the actual axle model and configuration before ordering because these axles were produced in multiple versions.\u003c\/p\u003e\n\u003ch3\u003eDoes this kit work with reverse-rotation Dana 60 front axles?\u003c\/h3\u003e\n\u003cp\u003eYes. The supplied fitment information lists compatibility with both standard-rotation and reverse-rotation front axle applications. Always verify the actual axle and bearing configuration before beginning the rebuild.\u003c\/p\u003e\n\u003ch3\u003eWhy are Timken bearings important in a differential rebuild?\u003c\/h3\u003e\n\u003cp\u003eThe carrier and pinion bearings control the alignment and support of the differential components under load. Using quality bearings and setting the correct preload are important parts of maintaining consistent gear alignment and long-term differential reliability.\u003c\/p\u003e\n\u003ch3\u003eDo I still need specialized tools to install this kit?\u003c\/h3\u003e\n\u003cp\u003eYes. A differential rebuild requires measuring and setup tools for bearing preload, pinion depth, backlash, and gear tooth contact pattern. Professional installation is recommended unless you are experienced with differential setup.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e","brand":"Yukon Gear \u0026 Axle","offers":[{"title":"Default Title","offer_id":54639927492883,"sku":"YK D60-F","price":393.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/Dana-60-master-overhaul-kit-1.jpg?v=1788967691"},{"product_id":"yukon-gm-14bolt-master-overhaul-kit-89-98-diff","title":"Yukon GM 10.5\" 14-Bolt Master Overhaul Kit for '89-'98 Rear Differentials","description":"\u003cp\u003eThe \u003cstrong\u003eGM 10.5\" 14-Bolt Master Overhaul Kit\u003c\/strong\u003e provides the bearings, races, seals, shims, and setup components needed to properly rebuild 1989–1998 GM 14-bolt rear differentials. Built around premium Timken bearing components, this kit is intended for differential overhauls where bearing preload, pinion depth, backlash, and gear contact pattern must be reset during installation.\u003c\/p\u003e\n\n\u003cp\u003eThis version is designed around the early-style GM 10.5\" 14-bolt configuration using a 2.200\" hub-diameter pinion seal and the corresponding pilot and pinion bearing arrangement. It is a strong choice when replacing worn bearings, installing new gears, or refreshing a high-mileage axle used for towing, heavy-duty truck service, or off-road applications.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCarrier Bearings and Races\u003c\/li\u003e\n\u003cli\u003ePinion Bearings and Races\u003c\/li\u003e\n\u003cli\u003ePilot Bearing\u003c\/li\u003e\n\u003cli\u003ePinion Seal\u003c\/li\u003e\n\u003cli\u003eComplete Shim Kit\u003c\/li\u003e\n\u003cli\u003ePinion Nut\u003c\/li\u003e\n\u003cli\u003eCrush Sleeve\u003c\/li\u003e\n\u003cli\u003eThread Locker\u003c\/li\u003e\n\u003cli\u003eGear Marking Compound with Brush\u003c\/li\u003e\n\u003cli\u003eDifferential Gasket\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Ring gear bolts are \u003cstrong\u003enot included\u003c\/strong\u003e.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eSpecifications \u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eMaster Differential Overhaul Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Application\u003c\/td\u003e\n\u003ctd\u003eGM 10.5\" 14-Bolt Rear Differential\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Year Range\u003c\/td\u003e\n\u003ctd\u003e1989–1998 Axle Configurations\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBearing Manufacturer\u003c\/td\u003e\n\u003ctd\u003eTimken\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePinion Seal Style\u003c\/td\u003e\n\u003ctd\u003eEarly Style\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePinion Seal Hub Diameter\u003c\/td\u003e\n\u003ctd\u003e2.200\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePinion Bearing Configuration\u003c\/td\u003e\n\u003ctd\u003eHM903210 \/ HM903249\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePilot Bearing\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCarrier Bearings and Races\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePinion Bearings and Races\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShim Kit\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrush Sleeve\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePinion Nut\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDifferential Gasket\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGear Marking Compound\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRing Gear Bolts\u003c\/td\u003e\n\u003ctd\u003eNot Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFitment \u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eC2500 Suburban\u003c\/td\u003e\n\u003ctd\u003e1992–1999\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eC3500\u003c\/td\u003e\n\u003ctd\u003e1989–1998\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eExpress 2500 \/ 3500\u003c\/td\u003e\n\u003ctd\u003e1996–1998\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eG20 \/ G30\u003c\/td\u003e\n\u003ctd\u003e1989–1996\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eK2500 \/ K3500\u003c\/td\u003e\n\u003ctd\u003e1989–1998\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eK2500 Suburban\u003c\/td\u003e\n\u003ctd\u003e1992–1999\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eP30\u003c\/td\u003e\n\u003ctd\u003e1997–1998\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eR2500 \/ V2500 Suburban\u003c\/td\u003e\n\u003ctd\u003e1989–1991\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eC2500 \/ C3500\u003c\/td\u003e\n\u003ctd\u003e1989–1998\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eC2500 Suburban\u003c\/td\u003e\n\u003ctd\u003e1992–1999\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eG3500\u003c\/td\u003e\n\u003ctd\u003e1989–1996\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eK2500 \/ K3500\u003c\/td\u003e\n\u003ctd\u003e1989–1998\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eK2500 Suburban\u003c\/td\u003e\n\u003ctd\u003e1992–1999\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eP3500\u003c\/td\u003e\n\u003ctd\u003e1997–1999\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eR2500 \/ V2500 Suburban\u003c\/td\u003e\n\u003ctd\u003e1989–1991\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSavana 2500 \/ 3500\u003c\/td\u003e\n\u003ctd\u003e1996–1998\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits GM 10.5\" 14-bolt rear differential applications using the corresponding early-style bearing and seal configuration.\u003c\/li\u003e\n\u003cli\u003eDesigned primarily around 1989–1998 axle assemblies; some vehicle applications extend into 1999.\u003c\/li\u003e\n\u003cli\u003eUses an early-style pinion seal with a 2.200\" hub diameter.\u003c\/li\u003e\n\u003cli\u003eVehicle year and model alone do not guarantee axle fitment because multiple rear axle options may have been available.\u003c\/li\u003e\n\u003cli\u003eVerify the axle is a GM 10.5\" 14-bolt and confirm the pinion seal and bearing configuration before ordering.\u003c\/li\u003e\n\u003cli\u003eRing gear bolts are not included and should be inspected or replaced separately when required.\u003c\/li\u003e\n\u003cli\u003eProfessional differential setup is recommended because pinion depth, bearing preload, backlash, and gear contact pattern must be correctly established during assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cb\u003eFAQ\u003c\/b\u003e \u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\n\u003cdiv class=\"details-content rte\"\u003e\n\n\u003ch3\u003eWhat is included in a GM 14-bolt master overhaul kit?\u003c\/h3\u003e\n\u003cp\u003eThis kit includes the carrier and pinion bearings and races, pilot bearing, pinion seal, shims, crush sleeve, pinion nut, gasket, thread locker, and gear marking compound needed for a complete differential setup. Ring gear bolts are not included.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I know if I have a GM 10.5\" 14-bolt rear axle?\u003c\/h3\u003e\n\u003cp\u003eIdentify the axle by the differential housing and cover shape, bolt pattern, casting features, and ring gear configuration rather than relying only on the vehicle year and model. Axle swaps and multiple factory axle options are common on older GM trucks.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is the difference between early and late GM 14-bolt rebuild kits?\u003c\/h3\u003e\n\u003cp\u003eThe bearing and seal configuration changed between certain 14-bolt axle versions. This kit uses the early-style pinion seal with a 2.200\" hub diameter and the bearing arrangement specified for the applications listed above.\u003c\/p\u003e\n\n\u003ch3\u003eDo I need a master overhaul kit when changing ring and pinion gears?\u003c\/h3\u003e\n\u003cp\u003eA complete overhaul kit is recommended when installing new gears or rebuilding a high-mileage differential because proper setup depends on accurate bearing preload, pinion depth, and backlash. Reusing worn bearings, crush sleeves, or damaged shims can make correct gear setup difficult.\u003c\/p\u003e\n\n\u003ch3\u003eCan I install a GM 14-bolt rebuild kit myself?\u003c\/h3\u003e\n\u003cp\u003eIt can be installed by an experienced axle builder with the correct measuring and setup tools. Differential work requires setting pinion bearing preload, carrier preload, backlash, and gear contact pattern accurately, so professional installation is recommended if you are not familiar with ring-and-pinion setup.\u003c\/p\u003e\n\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e","brand":"Yukon Gear \u0026 Axle","offers":[{"title":"Default Title","offer_id":54639927558419,"sku":"YK GM14T-B","price":260.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/14-bolt-master-overhaul-kit-1.jpg?v=1788282861"},{"product_id":"yukon-gm-8-5in-master-overhaul-kit-rear-diff","title":"Yukon GM 8.5\" Rear Master Overhaul Kit - 28 Spline","description":"\u003cp\u003eThe \u003cstrong\u003eGM 8.5\" Rear Master Overhaul Kit\u003c\/strong\u003e provides the bearings, races, seal, shims, and setup components needed for a complete GM 8.5\" rear differential rebuild. Built around Timken bearing components, this kit is intended for gear changes, worn differential service, and complete axle rebuilds where pinion preload, carrier preload, backlash, and gear tooth contact pattern must be properly reset.\u003c\/p\u003e\n\n\u003cp\u003eThis kit is designed for GM 8.5\" rear axle applications using 1.625\" carrier journals and the LM501314 \/ LM501349 carrier bearing configuration. These axles were used across a wide range of GM cars, trucks, SUVs, vans, and performance platforms, so the actual differential configuration should always be verified before ordering rather than relying on vehicle year and model alone.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCarrier Bearings and Races\u003c\/li\u003e\n\u003cli\u003ePinion Bearings and Races\u003c\/li\u003e\n\u003cli\u003ePinion Seal\u003c\/li\u003e\n\u003cli\u003eComplete Shim Kit\u003c\/li\u003e\n\u003cli\u003eRing Gear Bolts\u003c\/li\u003e\n\u003cli\u003ePinion Nut\u003c\/li\u003e\n\u003cli\u003eCrush Sleeve\u003c\/li\u003e\n\u003cli\u003eThread Locker\u003c\/li\u003e\n\u003cli\u003eGear Marking Compound with Brush\u003c\/li\u003e\n\u003cli\u003eDifferential Gasket\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eSpecifications \u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eMaster Differential Overhaul Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Application\u003c\/td\u003e\n\u003ctd\u003eGM 8.5\" Rear Differential\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePosition\u003c\/td\u003e\n\u003ctd\u003eRear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBearing Manufacturer\u003c\/td\u003e\n\u003ctd\u003eTimken\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCarrier Bearing Configuration\u003c\/td\u003e\n\u003ctd\u003eLM501314 \/ LM501349\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCarrier Journal Diameter\u003c\/td\u003e\n\u003ctd\u003e1.625\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Spline Compatibility\u003c\/td\u003e\n\u003ctd\u003eCompatible with Many 28-Spline GM 8.5\" Applications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCarrier Bearings and Races\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePinion Bearings and Races\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePinion Seal\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShim Kit\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRing Gear Bolts\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrush Sleeve\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePinion Nut\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDifferential Gasket\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSetup Materials\u003c\/td\u003e\n\u003ctd\u003eThread Locker and Gear Marking Compound with Brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFitment \u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eRegal\u003c\/td\u003e\n\u003ctd\u003e1973–1987\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBuick\u003c\/td\u003e\n\u003ctd\u003eRiviera\u003c\/td\u003e\n\u003ctd\u003e1975–1978\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCadillac\u003c\/td\u003e\n\u003ctd\u003eEscalade\u003c\/td\u003e\n\u003ctd\u003e1999–2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eBlazer\u003c\/td\u003e\n\u003ctd\u003e1987–1994\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eC1500 \/ K1500\u003c\/td\u003e\n\u003ctd\u003e1988–1999\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCamaro\u003c\/td\u003e\n\u003ctd\u003e1970–1981\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCaprice \/ Impala\u003c\/td\u003e\n\u003ctd\u003e1970–1996\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eExpress 1500\u003c\/td\u003e\n\u003ctd\u003e1996–2003\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eMonte Carlo\u003c\/td\u003e\n\u003ctd\u003e1973–1978\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eNova\u003c\/td\u003e\n\u003ctd\u003e1970–1979\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eS10\u003c\/td\u003e\n\u003ctd\u003e1994–2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eSuburban 1500\u003c\/td\u003e\n\u003ctd\u003e1992–2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eTahoe\u003c\/td\u003e\n\u003ctd\u003e1995–1998\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eC1500 \/ K1500\u003c\/td\u003e\n\u003ctd\u003e1979–1999\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eG1500\u003c\/td\u003e\n\u003ctd\u003e1979–1995\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSavana 1500\u003c\/td\u003e\n\u003ctd\u003e1996–2003\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eSonoma\u003c\/td\u003e\n\u003ctd\u003e1994–2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eYukon\u003c\/td\u003e\n\u003ctd\u003e1992–2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOldsmobile\u003c\/td\u003e\n\u003ctd\u003eCutlass\u003c\/td\u003e\n\u003ctd\u003e1970–1977\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOldsmobile\u003c\/td\u003e\n\u003ctd\u003eOmega\u003c\/td\u003e\n\u003ctd\u003e1973–1979\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eBonneville\u003c\/td\u003e\n\u003ctd\u003e1970–1986\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eFirebird\u003c\/td\u003e\n\u003ctd\u003e1970–1981\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eGTO\u003c\/td\u003e\n\u003ctd\u003e1970–1973\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eGrand Prix\u003c\/td\u003e\n\u003ctd\u003e1971–1987\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePontiac\u003c\/td\u003e\n\u003ctd\u003eLeMans\u003c\/td\u003e\n\u003ctd\u003e1971–1981\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits GM 8.5\" rear differential applications only.\u003c\/li\u003e\n\u003cli\u003eCompatible with many 28-spline axle configurations.\u003c\/li\u003e\n\u003cli\u003eDesigned for applications using 1.625\" carrier journals.\u003c\/li\u003e\n\u003cli\u003eUses LM501314 \/ LM501349 carrier bearings.\u003c\/li\u003e\n\u003cli\u003eVehicle year and model do not guarantee fitment because many GM vehicles were available with multiple rear axle configurations.\u003c\/li\u003e\n\u003cli\u003eLater truck, SUV, and van applications may use different carrier bearings, seals, or axle spline counts.\u003c\/li\u003e\n\u003cli\u003eVerify ring gear diameter, carrier journal size, axle spline count, bearing numbers, and housing configuration before ordering.\u003c\/li\u003e\n\u003cli\u003eProfessional differential setup is recommended because pinion depth, bearing preload, backlash, and gear contact pattern must be established correctly during installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cb\u003eFAQ\u003c\/b\u003e \u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ch3\u003eWhat is included in a GM 8.5\" master overhaul kit?\u003c\/h3\u003e\n\u003cp\u003eThis kit includes the carrier and pinion bearings and races, pinion seal, shims, ring gear bolts, pinion nut, crush sleeve, differential gasket, thread locker, and gear marking compound needed for a complete differential rebuild and setup.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I know if I have a GM 8.5\" rear differential?\u003c\/h3\u003e\n\u003cp\u003eIdentify the axle by the housing, differential cover shape, ring gear size, casting features, and internal bearing dimensions rather than relying only on the vehicle model. GM used multiple rear axle designs across many of the vehicles listed above.\u003c\/p\u003e\n\n\u003ch3\u003eWill this kit fit both 28-spline and 30-spline GM 8.5 axles?\u003c\/h3\u003e\n\u003cp\u003eThe supplied fitment information identifies this kit as compatible with many 28-spline GM 8.5\" applications. Do not assume compatibility with a 30-spline carrier without confirming the carrier journal size, bearing numbers, and differential configuration first.\u003c\/p\u003e\n\n\u003ch3\u003eDo I need a master overhaul kit when installing new ring and pinion gears?\u003c\/h3\u003e\n\u003cp\u003eA master overhaul kit is recommended when changing gears or rebuilding a high-mileage differential because correct setup depends on fresh bearings and accurate pinion preload, carrier preload, backlash, and gear contact pattern.\u003c\/p\u003e\n\n\u003ch3\u003eWhy does the carrier journal size matter when ordering a GM 8.5 rebuild kit?\u003c\/h3\u003e\n\u003cp\u003eThe carrier bearings must match the diameter of the differential carrier journals. This kit is specified for 1.625\" carrier journals using LM501314 \/ LM501349 bearings, so confirming that dimension helps prevent ordering the wrong bearing package.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e","brand":"Yukon Gear \u0026 Axle","offers":[{"title":"Default Title","offer_id":54639927722259,"sku":"YK GM8.5","price":199.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/0359a87d2f45a3c0b63a0e157a3c59a2L.jpg?v=1788362467"},{"product_id":"dana-60-front-axle-master-overhaul-kit","title":"Yukon Dana 60 \/ Dana 61 Front Master Overhaul Kit - Timken Bearings","description":"\u003cp\u003eThe \u003cstrong\u003eYukon Dana 60 \/ Dana 61 Front Master Overhaul Kit\u003c\/strong\u003e provides the bearings, races, seals, shims, and installation components needed to rebuild a compatible Dana Spicer 60 or Dana 61 front differential. Featuring premium Timken bearings and races, this complete differential rebuild kit is designed for replacing worn internal components, installing new ring and pinion gears, or refreshing a heavy-duty front axle. It's a practical choice for classic Chevy, Dodge, and Ford trucks, off-road builds, rock crawlers, and heavy-duty 4WD applications where proper gear setup and long-term drivetrain reliability matter.\u003c\/p\u003e\n\u003cp\u003eOver time, worn carrier bearings, pinion bearings, and seals can contribute to gear noise, leaks, and inconsistent differential setup. This Yukon master overhaul kit includes Timken bearings along with the shims and installation hardware needed to establish proper pinion depth, bearing preload, backlash, and gear contact pattern. Before ordering, confirm the installed axle generation, pinion configuration, and differential components to ensure the kit matches your specific front axle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCarrier Bearings \u0026amp; Races\u003c\/li\u003e\n\u003cli\u003ePinion Bearings \u0026amp; Races\u003c\/li\u003e\n\u003cli\u003ePinion Seal\u003c\/li\u003e\n\u003cli\u003eAxle Seals\u003c\/li\u003e\n\u003cli\u003eComplete Shim Kit\u003c\/li\u003e\n\u003cli\u003eRing Gear Bolts\u003c\/li\u003e\n\u003cli\u003ePinion Nut\u003c\/li\u003e\n\u003cli\u003eCrush Sleeve\u003c\/li\u003e\n\u003cli\u003eOil Baffles \u0026amp; Slingers\u003c\/li\u003e\n\u003cli\u003eThread Locker\u003c\/li\u003e\n\u003cli\u003eGear Marking Compound with Brush\u003c\/li\u003e\n\u003cli\u003eDifferential Gasket\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e This is a \u003cstrong\u003efront differential master overhaul kit\u003c\/strong\u003e, not a complete axle rebuild kit. Ring and pinion gears, differential carriers, lockers, axle shafts, wheel bearings, and steering components are sold separately. Verify the installed Dana 60 or Dana 61 axle configuration before ordering.\u003c\/p\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eYukon Gear \u0026amp; Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eYK D60-F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eMaster Overhaul Kit \/ Differential Rebuild Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAxle Platform\u003c\/th\u003e\n\u003ctd\u003eDana Spicer 60 \/ Dana Spicer 61\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAxle Position\u003c\/th\u003e\n\u003ctd\u003eFront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBearing Manufacturer\u003c\/th\u003e\n\u003ctd\u003eTimken\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCarrier Bearings \u0026amp; Races\u003c\/th\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePinion Bearings \u0026amp; Races\u003c\/th\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePinion Seal\u003c\/th\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAxle Seals\u003c\/th\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShim Kit\u003c\/th\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRing Gear Bolts\u003c\/th\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePinion Nut\u003c\/th\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCrush Sleeve\u003c\/th\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOil Baffles \u0026amp; Slingers\u003c\/th\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInstallation Supplies\u003c\/th\u003e\n\u003ctd\u003eThread Locker, Gear Marking Compound \u0026amp; Brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDifferential Gasket\u003c\/th\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInstallation Type\u003c\/th\u003e\n\u003ctd\u003eFront Differential Rebuild \/ Ring \u0026amp; Pinion Installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePrimary Application\u003c\/th\u003e\n\u003ctd\u003eDana 60 \/ Dana 61 Front Differential Rebuilds, Gear Changes \u0026amp; Heavy-Duty 4WD Axle Service\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRequired Components\u003c\/th\u003e\n\u003ctd\u003eCompatible Differential Housing, Carrier, Ring \u0026amp; Pinion Gear Set \u0026amp; Axle Components\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eKnown Incompatibilities\u003c\/th\u003e\n\u003ctd\u003eUnverified Super 60 Configurations; Rear Axle Wheel-End Service; Incompatible Pinion \u0026amp; Bearing Arrangements\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eQuantity\u003c\/th\u003e\n\u003ctd\u003eOne Front Differential Master Overhaul Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003cp\u003eDesigned for compatible Dana 60 and Dana 61 front differential applications. Vehicle year and model alone do not guarantee fitment. Confirm the installed axle model, pinion configuration, and bearing arrangement before ordering, particularly on Ford Super Duty trucks equipped with later axle generations.\u003c\/p\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003cth\u003eAxle Application\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eK20 Suburban\u003c\/td\u003e\n\u003ctd\u003e1967–1969, 1971–1972\u003c\/td\u003e\n\u003ctd\u003eDana 60 \/ 61 Front - Verify Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eK30\u003c\/td\u003e\n\u003ctd\u003e1977–1986\u003c\/td\u003e\n\u003ctd\u003eDana 60 Front\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eK30 Pickup\u003c\/td\u003e\n\u003ctd\u003e1971, 1973–1974\u003c\/td\u003e\n\u003ctd\u003eDana 60 \/ 61 Front - Verify Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eRam 2500\u003c\/td\u003e\n\u003ctd\u003e1996–2002\u003c\/td\u003e\n\u003ctd\u003eDana 60 Front - Verify Configuration\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eRam 2500 RWD\u003c\/td\u003e\n\u003ctd\u003e1995–2002\u003c\/td\u003e\n\u003ctd\u003eVerify Front Axle Application\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eW200\u003c\/td\u003e\n\u003ctd\u003e1975–1980\u003c\/td\u003e\n\u003ctd\u003eDana 60 Front - Verify Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eW200 Pickup\u003c\/td\u003e\n\u003ctd\u003e1968–1974\u003c\/td\u003e\n\u003ctd\u003eDana 60 Front - Verify Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eW200 Series\u003c\/td\u003e\n\u003ctd\u003e1967\u003c\/td\u003e\n\u003ctd\u003eDana 60 Front - Verify Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eW250\u003c\/td\u003e\n\u003ctd\u003e1981–1993\u003c\/td\u003e\n\u003ctd\u003eDana 60 Front - Verify Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eW300\u003c\/td\u003e\n\u003ctd\u003e1975–1980\u003c\/td\u003e\n\u003ctd\u003eDana 60 Front - Verify Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eW300 Pickup\u003c\/td\u003e\n\u003ctd\u003e1968–1974\u003c\/td\u003e\n\u003ctd\u003eDana 60 Front - Verify Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eW300 Series\u003c\/td\u003e\n\u003ctd\u003e1960–1967\u003c\/td\u003e\n\u003ctd\u003eDana 60 Front - Verify Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eW350\u003c\/td\u003e\n\u003ctd\u003e1981–1993\u003c\/td\u003e\n\u003ctd\u003eDana 60 Front - Verify Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-250\u003c\/td\u003e\n\u003ctd\u003e1974–1999\u003c\/td\u003e\n\u003ctd\u003eDana 60 \/ 61 Front - Verify Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-250 Super Duty 4WD\u003c\/td\u003e\n\u003ctd\u003e1999–2013\u003c\/td\u003e\n\u003ctd\u003eDana 60 Front - Verify Generation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-350 4WD\u003c\/td\u003e\n\u003ctd\u003e1979–1997\u003c\/td\u003e\n\u003ctd\u003eDana 60 Front\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-350 Super Duty 4WD\u003c\/td\u003e\n\u003ctd\u003e1999–2015\u003c\/td\u003e\n\u003ctd\u003eDana 60 Front - Verify Generation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for compatible Dana Spicer 60 and Dana Spicer 61 front differentials\u003c\/li\u003e\n\u003cli\u003eIncludes Timken carrier and pinion bearings with matching races\u003c\/li\u003e\n\u003cli\u003eIncludes differential seals, shims, ring gear bolts, and setup components\u003c\/li\u003e\n\u003cli\u003eFront differential applications only\u003c\/li\u003e\n\u003cli\u003eNot a complete steering knuckle or wheel-end rebuild kit\u003c\/li\u003e\n\u003cli\u003eNot every Ford F-250 or F-350 uses a Dana 60 front axle\u003c\/li\u003e\n\u003cli\u003eLater Ford Super Duty and Super 60 applications require axle-specific verification\u003c\/li\u003e\n\u003cli\u003eTwo-wheel-drive applications require confirmation because this kit is intended for front drive axle differentials\u003c\/li\u003e\n\u003cli\u003eVerify axle identification, pinion configuration, bearing dimensions, and differential design before ordering\u003c\/li\u003e\n\u003cli\u003eProfessional differential setup is recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBuilder Note:\u003c\/strong\u003e Dana 60 front axles have been produced in multiple configurations over the years, including standard-cut, reverse-cut, and later Super 60 designs. These axle generations do not necessarily use the same bearings, seals, or installation components. Identify the actual axle before selecting a master overhaul kit, especially on vehicles with axle swaps or custom housings.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ch4\u003eWhat comes in the Yukon YK D60-F master overhaul kit?\u003c\/h4\u003e\n\u003cp\u003eThis kit includes Timken carrier bearings and races, pinion bearings and races, seals, shims, ring gear bolts, pinion hardware, oil baffles, slingers, thread locker, gear marking compound, and a differential gasket. It provides the major wear and setup components needed for a compatible Dana 60 or Dana 61 front differential rebuild.\u003c\/p\u003e\n\u003ch4\u003eWill this kit fit my Dana 60 front axle?\u003c\/h4\u003e\n\u003cp\u003eThis kit is designed for compatible Dana 60 and Dana 61 front differential applications. Verify the installed axle model, pinion configuration, and bearing arrangement before ordering because different axle generations use different components.\u003c\/p\u003e\n\u003ch4\u003eDoes this kit include Timken bearings?\u003c\/h4\u003e\n\u003cp\u003eYes. The supplied kit specifications identify premium Timken carrier and pinion bearings with matching races.\u003c\/p\u003e\n\u003ch4\u003eCan I use this kit when installing new ring and pinion gears?\u003c\/h4\u003e\n\u003cp\u003eYes. A master overhaul kit is recommended during a ring and pinion replacement because it provides new bearings, seals, shims, and installation hardware needed to establish proper gear setup and preload.\u003c\/p\u003e\n\u003ch4\u003eDoes this kit include the ring and pinion gears?\u003c\/h4\u003e\n\u003cp\u003eNo. Ring and pinion gears are sold separately. This kit includes the bearings, seals, shims, and installation components used during a differential rebuild or gear installation.\u003c\/p\u003e\n\u003ch4\u003eWill this kit fit a Ford F-350 Dana 60 front axle?\u003c\/h4\u003e\n\u003cp\u003eThis kit is listed for select Ford F-350 Dana 60 front axle applications. Ford used different front axle configurations over the years, so confirm the axle generation and internal bearing arrangement before ordering.\u003c\/p\u003e\n\u003ch4\u003eDoes this kit fit a Dana Super 60 front axle?\u003c\/h4\u003e\n\u003cp\u003eNot necessarily. Later Dana Super 60 front axles may use different pinion bearings, seals, and internal components. Confirm the exact axle configuration and Yukon kit application before ordering.\u003c\/p\u003e\n\u003ch4\u003eWhat is the difference between a master overhaul kit and a bearing install kit?\u003c\/h4\u003e\n\u003cp\u003eA master overhaul kit generally includes bearings, races, seals, shims, and installation hardware for a more complete differential rebuild. A bearing install kit typically includes fewer setup components and may not include a complete shim package. Always compare the contents of the specific kits before ordering.\u003c\/p\u003e\n\u003ch4\u003eWhat are common signs that a Dana 60 differential needs rebuilding?\u003c\/h4\u003e\n\u003cp\u003eCommon symptoms include gear whine, grinding noises, excessive backlash, leaking pinion seals, worn carrier bearings, and metal contamination in the differential oil. A complete inspection is needed to identify the cause and determine which components require replacement.\u003c\/p\u003e\n\u003ch4\u003eWhat is required for proper Dana 60 differential setup?\u003c\/h4\u003e\n\u003cp\u003eProper setup requires accurate pinion depth, pinion bearing preload, carrier bearing preload, backlash, and ring and pinion tooth contact pattern. Incorrect setup can cause noise, overheating, premature wear, or gear failure. Professional installation is recommended.\u003c\/p\u003e\n\u003ch4\u003eCan this kit be used for a custom rock crawler or off-road axle build?\u003c\/h4\u003e\n\u003cp\u003eYes, provided the custom axle uses a compatible Dana 60 or Dana 61 front differential configuration. Verify the housing, pinion, carrier, and bearing specifications before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e","brand":"Yukon Gear \u0026 Axle","offers":[{"title":"Default Title","offer_id":54639927787795,"sku":"YK D60-F","price":396.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/YKD60F-Dana60-Front-Axle-Master-Overhaul-Kit-1_1.jpg?v=1789655877"},{"product_id":"yukon-dana-60-dana-61-master-overhaul-kit-rear-diff","title":"Yukon Dana 60 \u0026 Dana 61 Rear Master Differential Overhaul Kit","description":"\u003cp\u003eThe \u003cstrong\u003eDana 60 \u0026amp; Dana 61 Rear Master Differential Overhaul Kit\u003c\/strong\u003e provides the bearings, races, seals, shims, and setup hardware needed when rebuilding a compatible Dana 60 or Dana 61 rear differential. It is a complete service package for builders replacing worn differential components or installing a new ring-and-pinion gearset.\u003c\/p\u003e\n\n\u003cp\u003eTimken carrier and pinion bearings provide the foundation of the kit, while the included shims, crush sleeve, ring gear bolts, pinion nut, marking compound, and installation supplies give you the supporting components needed to properly set up the differential instead of piecing together a rebuild kit one item at a time.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCarrier bearings and races\u003c\/li\u003e\n  \u003cli\u003ePinion bearings and races\u003c\/li\u003e\n  \u003cli\u003ePinion seal\u003c\/li\u003e\n  \u003cli\u003eComplete shim kit\u003c\/li\u003e\n  \u003cli\u003eRing gear bolts\u003c\/li\u003e\n  \u003cli\u003ePinion nut\u003c\/li\u003e\n  \u003cli\u003eCrush sleeve\u003c\/li\u003e\n  \u003cli\u003eOil baffles and slingers\u003c\/li\u003e\n  \u003cli\u003eThread locker\u003c\/li\u003e\n  \u003cli\u003eGear marking compound with brush\u003c\/li\u003e\n  \u003cli\u003eDifferential gasket\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Ring-and-pinion gears are sold separately. Dana 60 and Dana 61 rear axles were produced in multiple configurations, so verify the axle model, spline configuration, carrier, and bearing requirements before ordering.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n  \u003csummary class=\"details__header\"\u003e\n    \u003cstrong\u003eSpecifications\u003c\/strong\u003e\n    \u003cspan class=\"svg-wrapper icon-plus\"\u003e\n      \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n        \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n      \u003c\/svg\u003e\n    \u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv class=\"details-content rte\"\u003e\n    \u003ctable class=\"custom-specs-table\"\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003cth\u003eSpecification\u003c\/th\u003e\n          \u003cth\u003eDetails\u003c\/th\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eProduct Type\u003c\/td\u003e\n          \u003ctd\u003eMaster Differential Overhaul Kit\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eAxle Platform\u003c\/td\u003e\n          \u003ctd\u003eDana 60 \/ Dana 61\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eAxle Position\u003c\/td\u003e\n          \u003ctd\u003eRear\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eRotation\u003c\/td\u003e\n          \u003ctd\u003eStandard Rotation\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eBearing Brand\u003c\/td\u003e\n          \u003ctd\u003eTimken\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eCarrier Bearings \u0026amp; Races\u003c\/td\u003e\n          \u003ctd\u003eIncluded\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003ePinion Bearings \u0026amp; Races\u003c\/td\u003e\n          \u003ctd\u003eIncluded\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003ePinion Seal\u003c\/td\u003e\n          \u003ctd\u003eIncluded\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eShim Kit\u003c\/td\u003e\n          \u003ctd\u003eIncluded\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eRing Gear Bolts\u003c\/td\u003e\n          \u003ctd\u003eIncluded\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003ePinion Hardware\u003c\/td\u003e\n          \u003ctd\u003eIncluded\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eGear Setup Supplies\u003c\/td\u003e\n          \u003ctd\u003eMarking Compound, Brush \u0026amp; Thread Locker Included\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eRing \u0026amp; Pinion\u003c\/td\u003e\n          \u003ctd\u003eSold Separately\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eInstallation Type\u003c\/td\u003e\n          \u003ctd\u003eDifferential Rebuild \/ Gear Setup\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n  \u003csummary class=\"details__header\"\u003e\n    \u003cstrong\u003eFitment\u003c\/strong\u003e\n    \u003cspan class=\"svg-wrapper icon-plus\"\u003e\n      \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n        \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n      \u003c\/svg\u003e\n    \u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv class=\"details-content rte\"\u003e\n    \u003cp\u003e\u003cstrong\u003eDesigned For:\u003c\/strong\u003e\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eDana 60 rear differentials\u003c\/li\u003e\n      \u003cli\u003eSelect Dana 61 rear differentials\u003c\/li\u003e\n      \u003cli\u003eStandard-rotation rear axle applications\u003c\/li\u003e\n      \u003cli\u003eRing-and-pinion replacement\u003c\/li\u003e\n      \u003cli\u003eComplete differential rebuilds\u003c\/li\u003e\n      \u003cli\u003eWorn bearing and seal replacement\u003c\/li\u003e\n    \u003c\/ul\u003e\n\n    \u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eRear axle applications only.\u003c\/li\u003e\n      \u003cli\u003eDana 60 and Dana 61 axles were produced in multiple configurations.\u003c\/li\u003e\n      \u003cli\u003eSome early applications use 16-spline configurations.\u003c\/li\u003e\n      \u003cli\u003eVerify axle model, spline count, carrier configuration, and bearing requirements before ordering.\u003c\/li\u003e\n      \u003cli\u003eDo not determine fitment from vehicle year, make, and model alone.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n  \u003csummary class=\"details__header\"\u003e\n    \u003cstrong\u003eFAQ\u003c\/strong\u003e\n    \u003cspan class=\"svg-wrapper icon-plus\"\u003e\n      \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n        \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n      \u003c\/svg\u003e\n    \u003c\/span\u003e\n  \u003c\/summary\u003e\n  \u003cdiv class=\"details-content rte\"\u003e\n    \u003ch3\u003eDoes this kit include the ring-and-pinion gears?\u003c\/h3\u003e\n    \u003cp\u003eNo. The ring-and-pinion gearset is sold separately. This kit supplies the bearings, races, seals, shims, hardware, and setup components used during the differential rebuild and gear installation.\u003c\/p\u003e\n\n    \u003ch3\u003eWill this kit fit both Dana 60 and Dana 61 rear axles?\u003c\/h3\u003e\n    \u003cp\u003eIt is designed for Dana 60 and select Dana 61 rear differential applications using the corresponding bearing and seal configuration. Verify your specific axle before ordering.\u003c\/p\u003e\n\n    \u003ch3\u003eAre Timken bearings included?\u003c\/h3\u003e\n    \u003cp\u003eYes. The kit includes Timken carrier bearings, pinion bearings, and matching races.\u003c\/p\u003e\n\n    \u003ch3\u003eShould I install a master overhaul kit when changing gear ratios?\u003c\/h3\u003e\n    \u003cp\u003eA master overhaul kit provides the bearings, seals, shims, and setup hardware commonly needed when installing a new ring-and-pinion. It also allows worn service components to be replaced while the differential is already apart.\u003c\/p\u003e\n\n    \u003ch3\u003eWhat needs to be checked when setting up the gears?\u003c\/h3\u003e\n    \u003cp\u003ePinion depth, backlash, bearing preload, and the ring-and-pinion tooth contact pattern need to be properly established during differential setup.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e","brand":"Yukon Gear \u0026 Axle","offers":[{"title":"Default Title","offer_id":54639927820563,"sku":"YK D60-R","price":366.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/871f0d2cd64411e1132395179c44933f.jpg?v=1789050847"},{"product_id":"yukon-dana-44-master-overhaul-kit-front-30-spline-standard","title":"Yukon Dana 44 Standard Rotation Front Master Overhaul Kit – 30 Spline","description":"\u003cp\u003eThe \u003cstrong\u003eDana 44 Standard Rotation Front Master Overhaul Kit\u003c\/strong\u003e provides the bearings, races, seals, shims, and setup components needed for a complete rebuild of 30-spline Dana 44 front differentials. Built around Timken bearing components, this kit is intended for worn axle service, gear changes, and full differential rebuilds where pinion depth, bearing preload, backlash, and gear contact pattern must be reset correctly.\u003c\/p\u003e\n\n\u003cp\u003eThis kit is designed specifically for \u003cstrong\u003estandard rotation Dana 44 front axle housings\u003c\/strong\u003e and includes inner axle seals, ring gear bolts, oil baffles, slingers, and the installation materials commonly replaced during differential service. Because Dana 44 axles were used across many Jeep, Ford, GM, Dodge, and International applications, verifying the actual axle configuration is more important than relying on vehicle year and model alone.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCarrier Bearings and Races\u003c\/li\u003e\n\u003cli\u003ePinion Bearings and Races\u003c\/li\u003e\n\u003cli\u003ePinion Seal\u003c\/li\u003e\n\u003cli\u003eInner Axle Seals\u003c\/li\u003e\n\u003cli\u003eComplete Shim Kit\u003c\/li\u003e\n\u003cli\u003eRing Gear Bolts\u003c\/li\u003e\n\u003cli\u003ePinion Nut\u003c\/li\u003e\n\u003cli\u003eOil Baffles and Slingers\u003c\/li\u003e\n\u003cli\u003eThread Locker\u003c\/li\u003e\n\u003cli\u003eGear Marking Compound with Brush\u003c\/li\u003e\n\u003cli\u003eDifferential Gasket\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eSpecifications \u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eMaster Differential Overhaul Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Application\u003c\/td\u003e\n\u003ctd\u003eDana 44 Front Differential\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRotation\u003c\/td\u003e\n\u003ctd\u003eStandard Rotation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Spline Count\u003c\/td\u003e\n\u003ctd\u003e30 Spline\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCover Bolt Count\u003c\/td\u003e\n\u003ctd\u003e10 Bolt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBearing Manufacturer\u003c\/td\u003e\n\u003ctd\u003eTimken\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCarrier Bearings and Races\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePinion Bearings and Races\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePinion Seal\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Axle Seals\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShim Kit\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRing Gear Bolts\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePinion Nut\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOil Baffles and Slingers\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDifferential Gasket\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSetup Materials\u003c\/td\u003e\n\u003ctd\u003eThread Locker and Gear Marking Compound with Brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePosition\u003c\/td\u003e\n\u003ctd\u003eFront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFitment \u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eBlazer\u003c\/td\u003e\n\u003ctd\u003e1969–1974\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eK10 Pickup\u003c\/td\u003e\n\u003ctd\u003e1961–1974\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eK20 Pickup\u003c\/td\u003e\n\u003ctd\u003e1962–1974\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eK30 Pickup\u003c\/td\u003e\n\u003ctd\u003e1968–1974\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eK5 Blazer\u003c\/td\u003e\n\u003ctd\u003e1975–1980\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eRam 2500\u003c\/td\u003e\n\u003ctd\u003e1994–2002\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eRamcharger\u003c\/td\u003e\n\u003ctd\u003e1974–1993\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eW100\u003c\/td\u003e\n\u003ctd\u003e1960–1989\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eW150\u003c\/td\u003e\n\u003ctd\u003e1977–1985\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eW200\u003c\/td\u003e\n\u003ctd\u003e1960–1980\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eW250\u003c\/td\u003e\n\u003ctd\u003e1981–1993\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eBronco\u003c\/td\u003e\n\u003ctd\u003e1971–1977\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-100\u003c\/td\u003e\n\u003ctd\u003e1966–1976\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003e1976–1977\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-250\u003c\/td\u003e\n\u003ctd\u003e1966–1977\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eK15 \/ K1500 Pickup\u003c\/td\u003e\n\u003ctd\u003e1966–1978\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eK25 \/ K2500 Pickup\u003c\/td\u003e\n\u003ctd\u003e1967–1978\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eK1500 Suburban\u003c\/td\u003e\n\u003ctd\u003e1967–1980\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eK2500 Suburban\u003c\/td\u003e\n\u003ctd\u003e1967–1980\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInternational\u003c\/td\u003e\n\u003ctd\u003eScout II\u003c\/td\u003e\n\u003ctd\u003e1971–1980\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eCJ6\u003c\/td\u003e\n\u003ctd\u003e1971–1975\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eComanche\u003c\/td\u003e\n\u003ctd\u003e1986–1992\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eGrand Wagoneer\u003c\/td\u003e\n\u003ctd\u003e1984–1993\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eJ10\u003c\/td\u003e\n\u003ctd\u003e1974–1988\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits Dana 44 \u003cstrong\u003estandard rotation front axle\u003c\/strong\u003e applications only.\u003c\/li\u003e\n\u003cli\u003eDesigned for 30-spline axle configurations.\u003c\/li\u003e\n\u003cli\u003eNot intended for reverse-rotation \/ high-pinion Dana 44 front axles.\u003c\/li\u003e\n\u003cli\u003eCompatible with standard 10-bolt Dana 44 differential cover applications.\u003c\/li\u003e\n\u003cli\u003eVehicle year and model do not guarantee axle fitment because many of these vehicles were offered with multiple axle options.\u003c\/li\u003e\n\u003cli\u003eAxle swaps are common on older Jeeps, Broncos, trucks, and custom off-road builds; verify the actual housing before ordering.\u003c\/li\u003e\n\u003cli\u003eConfirm axle rotation, spline count, carrier configuration, seal dimensions, and bearing arrangement before installation.\u003c\/li\u003e\n\u003cli\u003eProfessional differential setup is recommended because pinion depth, bearing preload, backlash, and gear contact pattern must be established accurately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cb\u003eFAQ\u003c\/b\u003e \u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ch3\u003eWhat is included in a Dana 44 master overhaul kit?\u003c\/h3\u003e\n\u003cp\u003eThis kit includes the carrier and pinion bearings and races, pinion seal, inner axle seals, shims, ring gear bolts, pinion nut, oil baffles, slingers, gasket, thread locker, and gear marking compound needed for a complete differential rebuild and setup.\u003c\/p\u003e\n\n\u003ch3\u003eHow do I know if my Dana 44 is standard rotation or reverse rotation?\u003c\/h3\u003e\n\u003cp\u003eStandard-rotation and reverse-rotation Dana 44 axles use different gear and bearing configurations. Identify the housing and pinion position before ordering rather than relying only on the vehicle model. This kit is intended specifically for standard-rotation front Dana 44 assemblies.\u003c\/p\u003e\n\n\u003ch3\u003eDo I need a master overhaul kit when installing new Dana 44 gears?\u003c\/h3\u003e\n\u003cp\u003eA master overhaul kit is recommended when changing ring and pinion gears or rebuilding a worn differential because the new setup depends on accurate bearing preload, pinion depth, backlash, and gear contact pattern.\u003c\/p\u003e\n\n\u003ch3\u003eWhy are inner axle seals included in a front Dana 44 rebuild kit?\u003c\/h3\u003e\n\u003cp\u003eThe inner axle seals keep differential oil inside the center section while the axle shafts pass through the housing tubes. Replacing them during a differential rebuild helps prevent leaks that would otherwise require significant disassembly to repair later.\u003c\/p\u003e\n\n\u003ch3\u003eCan I rebuild a Dana 44 differential myself?\u003c\/h3\u003e\n\u003cp\u003eAn experienced builder with the correct setup tools can perform the rebuild, but differential setup requires precise measurements. Pinion depth, pinion bearing preload, carrier preload, backlash, and tooth contact pattern must all be correct for quiet operation and long gear life.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e","brand":"Yukon Gear \u0026 Axle","offers":[{"title":"Default Title","offer_id":54639928541459,"sku":"YK D44","price":317.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/3e49372d728de95b86f441431e4dc510.jpg?v=1788362466"},{"product_id":"yukon-dana-super-60-master-overhaul-kit-front-diff","title":"Yukon Dana Super 60 Master Overhaul Kit - Super Duty","description":"\u003cp\u003eThe \u003cstrong\u003eDana Super 60 Master Overhaul Kit\u003c\/strong\u003e provides the bearings, races, seals, shims, and setup components needed to rebuild the front differential in compatible Ford Super Duty trucks. Designed for Dana Super 60 front axles, this complete kit helps restore proper carrier preload, pinion preload, backlash, sealing, and long-term gear reliability.\u003c\/p\u003e\n\u003cp\u003eDana Super 60 front axles are commonly used in heavy-duty towing, commercial hauling, oversized tire applications, and off-road builds where the front differential is exposed to increased load, steering stress, and driveline angle. Using matched Timken bearings and fresh setup components during a rebuild helps support quiet operation, consistent gear contact, and dependable service life.\u003c\/p\u003e\n\u003ch4\u003eIncludes:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eCarrier Bearings and Races\u003c\/li\u003e\n\u003cli\u003ePinion Bearings and Races\u003c\/li\u003e\n\u003cli\u003ePinion Seal\u003c\/li\u003e\n\u003cli\u003eTwo-Piece Inner Axle Seals\u003c\/li\u003e\n\u003cli\u003eComplete Shim Kit\u003c\/li\u003e\n\u003cli\u003eRing Gear Bolts\u003c\/li\u003e\n\u003cli\u003ePinion Nut\u003c\/li\u003e\n\u003cli\u003eCrush Sleeve\u003c\/li\u003e\n\u003cli\u003eOil Baffles and Slingers\u003c\/li\u003e\n\u003cli\u003eThread Locker\u003c\/li\u003e\n\u003cli\u003eGear Marking Compound with Brush\u003c\/li\u003e\n\u003cli\u003eDifferential Gasket\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eMaster Differential Overhaul Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Application\u003c\/td\u003e\n\u003ctd\u003eDana Super 60 Front Differential\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Platform\u003c\/td\u003e\n\u003ctd\u003eFord Super Duty 4WD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Spline Compatibility\u003c\/td\u003e\n\u003ctd\u003e35-Spline Front Axle Applications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBearing Brand\u003c\/td\u003e\n\u003ctd\u003eTimken\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCarrier Bearings and Races\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePinion Bearings and Races\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePinion Seal\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Axle Seals\u003c\/td\u003e\n\u003ctd\u003eTwo-Piece Seals Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShim Kit\u003c\/td\u003e\n\u003ctd\u003eComplete Setup Shim Kit Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRing Gear Bolts\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrush Sleeve\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSetup Materials\u003c\/td\u003e\n\u003ctd\u003eThread Locker and Gear Marking Compound Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Position\u003c\/td\u003e\n\u003ctd\u003eFront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003cth\u003eAxle Application\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-250 Super Duty\u003c\/td\u003e\n\u003ctd\u003e2002–2015\u003c\/td\u003e\n\u003ctd\u003eDana Super 60 Front Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-350 Super Duty\u003c\/td\u003e\n\u003ctd\u003e2002–2015\u003c\/td\u003e\n\u003ctd\u003eDana Super 60 Front Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-450 Super Duty\u003c\/td\u003e\n\u003ctd\u003e2004–2014\u003c\/td\u003e\n\u003ctd\u003eDana Super 60 Front Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-550 Super Duty\u003c\/td\u003e\n\u003ctd\u003e2004–2013\u003c\/td\u003e\n\u003ctd\u003eDana Super 60 Front Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits Dana Super 60 front axle applications only.\u003c\/li\u003e\n\u003cli\u003eDesigned for 35-spline front differential configurations.\u003c\/li\u003e\n\u003cli\u003eIncludes two-piece inner axle seals.\u003c\/li\u003e\n\u003cli\u003eIntended for 4WD Ford Super Duty applications.\u003c\/li\u003e\n\u003cli\u003eVerify axle model, spline count, bearing dimensions, and year-specific fitment before ordering.\u003c\/li\u003e\n\u003cli\u003eProfessional differential setup is recommended.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" width=\"14\" height=\"14\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ch3\u003eWhy use a master overhaul kit?\u003c\/h3\u003e\n\u003cp\u003eA master overhaul kit provides the major wear components and setup hardware needed for a complete differential rebuild. This helps prevent old bearings, seals, or one-time-use hardware from compromising a new gear installation.\u003c\/p\u003e\n\u003ch3\u003eWhy are Timken bearings important?\u003c\/h3\u003e\n\u003cp\u003eMatched Timken bearings and races provide consistent fit, load support, and durability in heavy-duty differential applications. Proper bearing quality is especially important when maintaining pinion preload and carrier alignment.\u003c\/p\u003e\n\u003ch3\u003eDoes this kit fit every Ford Dana 60 front axle?\u003c\/h3\u003e\n\u003cp\u003eNo. This kit is intended for Dana Super 60 front axle applications within the listed Ford Super Duty year ranges. Verify the axle model and internal dimensions before ordering.\u003c\/p\u003e\n\u003ch3\u003eShould a differential rebuild be handled by a professional?\u003c\/h3\u003e\n\u003cp\u003eYes. Correct pinion depth, bearing preload, backlash, and gear contact pattern require specialized tools and experience. Improper setup can quickly damage the ring and pinion or new bearings.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e","brand":"Yukon Gear \u0026 Axle","offers":[{"title":"Default Title","offer_id":54639928574227,"sku":"YK D60-SUP","price":418.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/Dana-Super-60-master-overhaul-kit-1.jpg?v=1789652799"},{"product_id":"yukon-dana-70-master-overhaul-kit-rear-diff","title":"Yukon Dana 70 Master Overhaul Kit - Rear Differential","description":"\u003cp class=\"p1\"\u003eThis Dana 70 master overhaul kit is designed for complete differential rebuilds in heavy-duty truck, van, commercial, and towing applications using Dana 70 rear axles. \u003cmeta charset=\"utf-8\"\u003eThis overhaul kit includes Timken bearings and races along with the essential setup hardware needed to correctly establish pinion preload, carrier preload, backlash, and gear tooth contact during installation.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eDana 70 axles are commonly found in one-ton trucks, commercial vans, tow rigs, and heavy payload applications because of their large ring gear size, high spline-count axle shafts, and exceptional load capacity. Proper differential setup is critical for towing reliability, heavy hauling, oversized tires, and high-torque drivetrain applications.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cb\u003eIncludes:\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li1\"\u003eCarrier bearings and races\u003c\/li\u003e\n\u003cli class=\"li1\"\u003ePinion bearings and races\u003c\/li\u003e\n\u003cli class=\"li1\"\u003ePinion seal\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eComplete shim kit\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eRing gear bolts\u003c\/li\u003e\n\u003cli class=\"li1\"\u003ePinion nut\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eOil baffles and slingers\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eThread locker\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eGear marking compound with brush\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eDifferential gasket\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eSpecifications \u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" height=\"14\" width=\"14\"\u003e\n          \u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M2.75 7H11.25\" class=\"vertical\"\u003e\u003c\/path\u003e\n          \u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M7 2.75L7 11.25\" class=\"horizontal\"\u003e\u003c\/path\u003e\n        \u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li1\"\u003e\n\u003cmeta charset=\"utf-8\"\u003eCompatible with 35 spline Dana 70 rear differentials\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eDesigned for heavy-duty rear axle applications\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eTimken bearings and races included\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eIncludes preload and shim setup components\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eIncludes ring gear bolts and pinion hardware\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eUses HM807010 \/ HM807040 inner pinion bearing set\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eUses 382S \/ 387A carrier bearings\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFitment \u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" height=\"14\" width=\"14\"\u003e\n          \u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M2.75 7H11.25\" class=\"vertical\"\u003e\u003c\/path\u003e\n          \u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M7 2.75L7 11.25\" class=\"horizontal\"\u003e\u003c\/path\u003e\n        \u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable cellspacing=\"0\" cellpadding=\"0\" class=\"t1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p1\"\u003e\u003cb\u003eMake\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p1\"\u003e\u003cb\u003eModel\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p1\"\u003e\u003cb\u003eYear Range\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003eDodge\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003eD250\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003e1981–1984\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003eDodge\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003eD350\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003e1981–1993\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003eDodge\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003eW200 Pickup\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003e1968–1974\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003eDodge\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003eW250\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003e1981–1984\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003eDodge\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003eW300\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003e1975–1978\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003eDodge\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003eW300 Pickup\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003e1968–1974\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003eDodge\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003eW350\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003e1981–1984\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003eFord\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003eE-350 Econoline\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003e1975–1998\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003eFord\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003eE-350 Super Duty\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003e2000–2012\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003eFord\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003eE-450 Econoline Super Duty\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003e2000–2002\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003eFord\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003eE-450 Super Duty\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003e2003–2010\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003eGMC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003eG35\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003e1975–1978\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003eGMC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003eG35\/G3500 Van\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003e1973–1974\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003eGMC\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003eG3500\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003e1979–1991\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp class=\"p1\"\u003e\u003cb\u003eFitment Notes:\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li1\"\u003eCompatible with many 35 spline Dana 70 axle configurations\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eVerify axle type, spline count, and carrier configuration before ordering\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eIntended for rear differential rebuild applications only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cb id=\"docs-internal-guid-785e0e5c-7fff-2ba3-1543-a8eda468b24e\"\u003e\u003cspan\u003eTech Insight\u003c\/span\u003e\u003c\/b\u003e \u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" height=\"14\" width=\"14\"\u003e\n          \u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M2.75 7H11.25\" class=\"vertical\"\u003e\u003c\/path\u003e\n          \u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M7 2.75L7 11.25\" class=\"horizontal\"\u003e\u003c\/path\u003e\n        \u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003cp class=\"p1\"\u003eDana 70 axles are known for their massive carrier bearings, large pinion support, and heavy-duty load handling capability. These axles are commonly used in towing, commercial hauling, motorhomes, heavy-duty vans, and off-road applications where drivetrain durability is critical.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eDuring gear installation or differential service, proper preload, backlash, and gear tooth contact pattern setup are essential for long gear life and quiet operation. Replacing worn bearings, seals, and setup components during a rebuild helps maintain correct gear alignment under heavy loads and reduces the risk of premature bearing or ring and pinion failure.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e","brand":"Yukon Gear \u0026 Axle","offers":[{"title":"Default Title","offer_id":54639928672531,"sku":"YK D70","price":503.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/975dbf2a35d0005edbe25933bbc3e24dL.jpg?v=1789652836"},{"product_id":"master-overhaul-kit-2017-ford-dana-60-front-differential","title":"Yukon Dana Super 60 Master Overhaul Kit for 17+ Ford Super Duty Front Axles","description":"\n\u003cp\u003eThe \u003cstrong\u003eYukon Master Overhaul Kit for 2017+ Ford Super Duty Dana Super 60 Front Axles\u003c\/strong\u003e includes the bearings, races, seals, shims, and installation hardware needed to rebuild your front differential or install a new ring and pinion gear set. Designed for Dana Super 60 front axles with a 28-spline pinion, this kit provides the major service components for compatible Ford F-250, F-350, F-450, and F-550 Super Duty trucks.\u003c\/p\u003e\n\n\u003cp\u003eWhether you're replacing worn bearings, fixing differential noise, or changing gear ratios, having the correct setup components makes the job easier and helps avoid premature gear wear. This Yukon kit includes premium Timken bearings and races, inner axle seals, and the hardware needed to properly set bearing preload, backlash, and gear contact pattern. It's a practical choice for heavy-duty trucks used for towing, work, snow plowing, and off-road driving.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCarrier Bearings \u0026amp; Races\u003c\/li\u003e\n\u003cli\u003ePinion Bearings \u0026amp; Races\u003c\/li\u003e\n\u003cli\u003eInner Axle Seals\u003c\/li\u003e\n\u003cli\u003ePinion Seal\u003c\/li\u003e\n\u003cli\u003eComplete Shim Kit\u003c\/li\u003e\n\u003cli\u003eRing Gear Bolts\u003c\/li\u003e\n\u003cli\u003ePinion Nut\u003c\/li\u003e\n\u003cli\u003eCrush Sleeve\u003c\/li\u003e\n\u003cli\u003eOil Baffles \u0026amp; Slingers\u003c\/li\u003e\n\u003cli\u003eThread Locker\u003c\/li\u003e\n\u003cli\u003eGear Marking Compound with Brush\u003c\/li\u003e\n\u003cli\u003eGasket \u0026amp; Installation Components\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eYukon Gear \u0026amp; Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eMaster Differential Overhaul Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAxle Platform\u003c\/th\u003e\n\u003ctd\u003eDana Super 60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVehicle Platform\u003c\/th\u003e\n\u003ctd\u003eFord Super Duty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel Years\u003c\/th\u003e\n\u003ctd\u003e2017+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAxle Position\u003c\/th\u003e\n\u003ctd\u003eFront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePinion Spline Count\u003c\/th\u003e\n\u003ctd\u003e28-Spline\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eBearing Manufacturer\u003c\/th\u003e\n\u003ctd\u003eTimken\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCarrier Bearings \u0026amp; Races\u003c\/th\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePinion Bearings \u0026amp; Races\u003c\/th\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInner Axle Seals\u003c\/th\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePinion Seal\u003c\/th\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDifferential Shims\u003c\/th\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRing Gear Bolts\u003c\/th\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePinion Nut\u003c\/th\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCrush Sleeve\u003c\/th\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eGear Marking Compound\u003c\/th\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eThread Locker\u003c\/th\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInstallation Type\u003c\/th\u003e\n\u003ctd\u003eInternal Differential Rebuild \/ Gear Installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePrimary Application\u003c\/th\u003e\n\u003ctd\u003eFront Differential Rebuild \u0026amp; Ring and Pinion Installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\n\u003cp\u003eDesigned for 2017 and newer Ford Super Duty trucks equipped with the Dana Super 60 front differential and 28-spline pinion. Verify your installed axle before ordering.\u003c\/p\u003e\n\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003cth\u003eAxle Application\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-250 Super Duty\u003c\/td\u003e\n\u003ctd\u003e2017+\u003c\/td\u003e\n\u003ctd\u003eDana Super 60 Front\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-350 Super Duty\u003c\/td\u003e\n\u003ctd\u003e2017+\u003c\/td\u003e\n\u003ctd\u003eDana Super 60 Front\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-450 Super Duty\u003c\/td\u003e\n\u003ctd\u003e2017+\u003c\/td\u003e\n\u003ctd\u003eDana Super 60 Front\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-550 Super Duty\u003c\/td\u003e\n\u003ctd\u003e2017+\u003c\/td\u003e\n\u003ctd\u003eDana Super 60 Front\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits compatible Dana Super 60 front differentials\u003c\/li\u003e\n\u003cli\u003eDesigned for 2017+ Ford Super Duty applications\u003c\/li\u003e\n\u003cli\u003eRequires 28-spline pinion configuration\u003c\/li\u003e\n\u003cli\u003eFront axle applications only\u003c\/li\u003e\n\u003cli\u003eSuitable for differential bearing replacement, rebuilding, and ring and pinion installations\u003c\/li\u003e\n\u003cli\u003eVerify axle identification and pinion spline count before ordering\u003c\/li\u003e\n\u003cli\u003eNot intended for older Dana 60 front axle configurations\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\n\u003ch4\u003eWhat Ford Super Duty trucks does this master overhaul kit fit?\u003c\/h4\u003e\n\u003cp\u003eThis kit is designed for compatible 2017+ Ford F-250, F-350, F-450, and F-550 Super Duty trucks equipped with the Dana Super 60 front axle and 28-spline pinion. Verify the axle model before ordering, as equipment can vary by vehicle configuration.\u003c\/p\u003e\n\n\u003ch4\u003eDoes this Yukon overhaul kit include Timken bearings?\u003c\/h4\u003e\n\u003cp\u003eYes. The kit includes premium Timken carrier bearings, pinion bearings, and matching races. These components are important for maintaining proper differential alignment and long-term gear reliability.\u003c\/p\u003e\n\n\u003ch4\u003eAre inner axle seals included?\u003c\/h4\u003e\n\u003cp\u003eYes. Inner axle seals and the pinion seal are included, allowing worn seals to be replaced while the differential is disassembled.\u003c\/p\u003e\n\n\u003ch4\u003eShould I use a master overhaul kit when installing new ring and pinion gears?\u003c\/h4\u003e\n\u003cp\u003eYes. We recommend replacing bearings, races, seals, and setup components during a gear change, especially on a high-mileage or heavily used axle. A master overhaul kit provides the parts needed to establish proper preload, backlash, and gear contact pattern during installation.\u003c\/p\u003e\n\n\u003ch4\u003eWill this kit fit older Ford Dana 60 front axles?\u003c\/h4\u003e\n\u003cp\u003eNo. This kit is designed for the 2017+ Dana Super 60 front axle configuration with a 28-spline pinion. Older Dana 60 axles may use different bearings, seals, and pinion components.\u003c\/p\u003e\n\n\u003ch4\u003eDoes this kit include ring and pinion gears?\u003c\/h4\u003e\n\u003cp\u003eNo. This is a differential overhaul and installation kit. Ring and pinion gears are purchased separately, allowing you to select the correct gear ratio for your truck and intended use.\u003c\/p\u003e\n\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n    ","brand":"Yukon Gear \u0026 Axle","offers":[{"title":"Default Title","offer_id":54639928705299,"sku":"YK D60SR","price":282.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/8df2baff2dbbd4a8521c9e98fdfda74aL.jpg?v=1788287912"},{"product_id":"yukon-dana-44-jk-rubicon-bearing-install-kit-reverse-front-diff","title":"Yukon Jeep JK Rubicon Dana 44 Front Bearing Install Kit - Reverse Rotation","description":"\n\u003cp\u003eThe \u003cstrong\u003eYukon Jeep JK Rubicon Dana 44 Front Bearing Install Kit\u003c\/strong\u003e provides the essential bearings, races, seals, and setup components needed when servicing or regearing the reverse rotation Dana 44 front differential. Designed for Jeep Wrangler JK Rubicon applications, this kit is a practical option for builders replacing worn differential bearings or installing new ring and pinion gears without purchasing a complete master overhaul kit. It supplies the major bearing and sealing components while leaving out the shim kit for builders who already have the necessary setup shims.\u003c\/p\u003e\n\n\u003cp\u003eProper differential setup matters, especially on JK Rubicon front axles running larger tires, locking differentials, and lower gear ratios. This Yukon bearing kit includes carrier and pinion bearings with matching races, a pinion seal, crush sleeve, oil baffles and slingers, and gear marking compound to help complete the installation. Whether you're rebuilding a worn front differential or setting up new gears, correct pinion depth, bearing preload, backlash, and gear contact pattern are essential for quiet operation and long-term reliability.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCarrier Bearings \u0026amp; Races\u003c\/li\u003e\n\u003cli\u003ePinion Bearings \u0026amp; Races\u003c\/li\u003e\n\u003cli\u003ePinion Seal\u003c\/li\u003e\n\u003cli\u003eCrush Sleeve\u003c\/li\u003e\n\u003cli\u003eOil Baffles \u0026amp; Slingers\u003c\/li\u003e\n\u003cli\u003eGear Marking Compound \u0026amp; Brush\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e This is a bearing installation kit, not a master overhaul kit. \u003cstrong\u003eShims are NOT included.\u003c\/strong\u003e Existing serviceable shims or a separately purchased shim kit are required to complete differential setup. Ring and pinion gears are sold separately.\u003c\/p\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eYukon Gear \u0026amp; Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eBK D44-JK-REV-RUB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eDifferential Bearing Install Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAxle Platform\u003c\/th\u003e\n\u003ctd\u003eJeep JK Rubicon Dana 44\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRing Gear Diameter\u003c\/th\u003e\n\u003ctd\u003e8.50\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eGear Configuration\u003c\/th\u003e\n\u003ctd\u003eReverse Rotation \/ High Pinion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eVehicle Platform\u003c\/th\u003e\n\u003ctd\u003eJeep Wrangler JK Rubicon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAxle Position\u003c\/th\u003e\n\u003ctd\u003eFront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCarrier Bearings \u0026amp; Races\u003c\/th\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePinion Bearings \u0026amp; Races\u003c\/th\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePinion Seal\u003c\/th\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCrush Sleeve\u003c\/th\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOil Baffles \u0026amp; Slingers\u003c\/th\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eGear Marking Compound \u0026amp; Brush\u003c\/th\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eShim Kit\u003c\/th\u003e\n\u003ctd\u003eNot Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRing \u0026amp; Pinion Gears\u003c\/th\u003e\n\u003ctd\u003eNot Included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInstallation Type\u003c\/th\u003e\n\u003ctd\u003eDifferential Bearing Replacement \/ Gear Installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePrimary Application\u003c\/th\u003e\n\u003ctd\u003eJeep JK Rubicon Dana 44 Front Differential Service \u0026amp; Regearing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eQuantity\u003c\/th\u003e\n\u003ctd\u003eOne Front Differential Bearing Install Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\n\u003cp\u003eDesigned for Jeep Wrangler JK Rubicon models equipped with the factory Dana 44 reverse rotation front differential. Verify the installed axle configuration before ordering.\u003c\/p\u003e\n\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003cth\u003eAxle Application\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eWrangler JK Rubicon\u003c\/td\u003e\n\u003ctd\u003e2007–2018*\u003c\/td\u003e\n\u003ctd\u003eDana 44 Front \/ Reverse Rotation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eWrangler JK Unlimited Rubicon\u003c\/td\u003e\n\u003ctd\u003e2007–2018*\u003c\/td\u003e\n\u003ctd\u003eDana 44 Front \/ Reverse Rotation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e\u003cem\u003e*2018 JK applications only. Does not fit the redesigned Wrangler JL front axle. Confirm the axle before ordering.\u003c\/em\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for Jeep JK Rubicon Dana 44 front differential applications\u003c\/li\u003e\n\u003cli\u003eReverse rotation \/ high-pinion axle configurations only\u003c\/li\u003e\n\u003cli\u003eCompatible with differential bearing replacement and ring and pinion installation\u003c\/li\u003e\n\u003cli\u003eDoes not include differential setup shims\u003c\/li\u003e\n\u003cli\u003eRequires existing serviceable shims or a separately purchased shim kit\u003c\/li\u003e\n\u003cli\u003eNot intended for Jeep JK Non-Rubicon Dana 30 front axles\u003c\/li\u003e\n\u003cli\u003eNot intended for Dana 44 rear differential applications\u003c\/li\u003e\n\u003cli\u003eVerify axle identification and bearing compatibility before ordering\u003c\/li\u003e\n\u003cli\u003eProfessional differential installation and gear setup are recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eBuilder Note:\u003c\/strong\u003e This kit makes sense when you already have the shims needed to set pinion depth and carrier preload. If you're starting a complete differential rebuild without setup components on hand, a master overhaul kit may be the better option.\u003c\/p\u003e\n\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\n\u003ch4\u003eWhat is the difference between a bearing install kit and a master overhaul kit?\u003c\/h4\u003e\n\u003cp\u003eA bearing install kit provides the major bearings, races, and selected installation components needed for differential service. A master overhaul kit typically includes additional setup parts such as shims and hardware. This Yukon bearing kit does not include shims, making it a good option for builders who already have the correct setup components.\u003c\/p\u003e\n\n\u003ch4\u003eDoes this kit include differential shims?\u003c\/h4\u003e\n\u003cp\u003eNo. Shims are not included. You'll need existing serviceable shims or a separately purchased shim kit to establish proper pinion depth, bearing preload, and gear backlash during installation.\u003c\/p\u003e\n\n\u003ch4\u003eWill this kit fit my Jeep JK Rubicon front axle?\u003c\/h4\u003e\n\u003cp\u003eThis kit is designed for compatible Jeep Wrangler JK Rubicon models equipped with a Dana 44 reverse rotation front differential. Verify the installed axle before ordering, especially on modified or axle-swapped Jeeps.\u003c\/p\u003e\n\n\u003ch4\u003eWill this bearing kit fit a Jeep JK Non-Rubicon?\u003c\/h4\u003e\n\u003cp\u003eNot if the Jeep has the factory Dana 30 front axle. This kit is designed specifically for the Dana 44 front differential used in JK Rubicon applications. The axle model and bearing dimensions must match.\u003c\/p\u003e\n\n\u003ch4\u003eCan I use this kit when installing new ring and pinion gears?\u003c\/h4\u003e\n\u003cp\u003eYes. This bearing install kit provides the major bearing and sealing components needed during a gear installation. However, shims and any additional required installation hardware must be available separately.\u003c\/p\u003e\n\n\u003ch4\u003eDoes this kit include the ring and pinion gears?\u003c\/h4\u003e\n\u003cp\u003eNo. This listing includes differential bearings, races, seals, and selected setup components only. Ring and pinion gears are sold separately.\u003c\/p\u003e\n\n\u003ch4\u003eWhy is proper differential bearing preload important?\u003c\/h4\u003e\n\u003cp\u003eCorrect bearing preload keeps the carrier and pinion properly supported under load. Too little preload can allow unwanted movement, while excessive preload can generate heat and accelerate bearing wear. Proper setup is critical for gear life, especially on Jeeps running larger tires and locking differentials.\u003c\/p\u003e\n\n\u003ch4\u003eWhat tools are needed to install this bearing kit?\u003c\/h4\u003e\n\u003cp\u003eDifferential service typically requires a bearing press or suitable installation tools, bearing pullers, dial indicator, inch-pound torque wrench, and gear marking compound. Accurate pinion depth, backlash, preload, and contact pattern adjustments are essential for reliable operation.\u003c\/p\u003e\n\n\u003ch4\u003eShould I replace differential bearings when regearing my Jeep?\u003c\/h4\u003e\n\u003cp\u003eReplacing worn bearings and races during a gear installation is recommended. New bearings provide a consistent foundation for establishing proper preload and gear alignment, helping reduce the risk of noise, premature wear, and differential failure.\u003c\/p\u003e\n\n\u003c\/div\u003e\n\u003c\/details\u003e\n","brand":"Yukon Gear \u0026 Axle","offers":[{"title":"Default Title","offer_id":54639928934675,"sku":"BK D44-JK-REV-RUB","price":307.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/90b7fc59c6c79ff386b681bf44d0df58_176914bc-d6cc-4a11-9b82-9d8fc3ae9334.jpg?v=1788288049"},{"product_id":"crane-revolution-30-spline-14-bolt-seal-system","title":"Crane Revolution 30 Spline 14 Bolt Seal System","description":"\u003cp class=\"p1\"\u003eThe Crane Axle Revolution GM 14-Bolt Inner Axle Seal Kit is designed to properly seal GM 14-Bolt steering axle assemblies using 30 spline or 35 spline axle shafts. This system replaces the factory carrier bearing preload spanners with precision-machined seal housings that integrate a common Dana 60 inner axle seal, creating a more stable and reliable sealing solution for front steer 14-Bolt applications.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eBy relocating the seal inward near the differential where axle shaft movement is minimized, the Revolution system improves long-term sealing performance and helps reduce fluid leakage and contamination entry. The use of a standard Dana 60 inner seal also simplifies future maintenance and replacement, making trail repairs and service easier compared to custom seal arrangements.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cb\u003eIncludes:\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li1\"\u003eRevolution 14 Seal Housing Spanners\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eRevolution 14 Inner Axle Seals\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eThread Sealant\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eSpecifications \u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" height=\"14\" width=\"14\"\u003e\n          \u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M2.75 7H11.25\" class=\"vertical\"\u003e\u003c\/path\u003e\n          \u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M7 2.75L7 11.25\" class=\"horizontal\"\u003e\u003c\/path\u003e\n        \u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li1\"\u003eFits GM 14-Bolt steering axle applications\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eDesigned for 30 spline and 35 spline axle assemblies\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eMachined from 1018 cold-rolled steel\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eUses standard Dana 60 inner axle seals\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eReplaces factory carrier bearing preload spanners\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eInternal seal positioning for improved shaft stability\u003c\/li\u003e\n\u003cli class=\"li1\"\u003ePrecision machined in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFitment \u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" height=\"14\" width=\"14\"\u003e\n          \u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M2.75 7H11.25\" class=\"vertical\"\u003e\u003c\/path\u003e\n          \u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M7 2.75L7 11.25\" class=\"horizontal\"\u003e\u003c\/path\u003e\n        \u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003cth\u003eAxle Application\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eGM\u003c\/td\u003e\n\u003ctd\u003eCustom Off-Road Applications\u003c\/td\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eGM 14-Bolt Steering Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eCustom Fabricated Axle Builds\u003c\/td\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eGM 14-Bolt Steering Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eCustom Fabricated Axle Builds\u003c\/td\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eGM 14-Bolt Steering Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp class=\"p1\"\u003e\u003cb\u003eFitment Notes:\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li1\"\u003eDesigned specifically for 30 spline and 35 spline axle shafts\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eIntended for GM 14-Bolt front steering axle conversions\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eReplaces factory preload spanners\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eCompatible with Dana 60 style inner axle seals\u003c\/li\u003e\n\u003cli class=\"li1\"\u003e40 spline version sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cb id=\"docs-internal-guid-785e0e5c-7fff-2ba3-1543-a8eda468b24e\"\u003e\u003cspan\u003eTech Insight\u003c\/span\u003e\u003c\/b\u003e \u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" height=\"14\" width=\"14\"\u003e\n          \u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M2.75 7H11.25\" class=\"vertical\"\u003e\u003c\/path\u003e\n          \u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M7 2.75L7 11.25\" class=\"horizontal\"\u003e\u003c\/path\u003e\n        \u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003cp class=\"p1\"\u003eTraditional GM 14-Bolt housings were not originally designed for steering axle use, which often creates sealing challenges once axle shafts begin cycling through large steering angles and suspension travel. Standard sealing methods can struggle with shaft movement and housing contamination in extreme off-road environments.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eThe Revolution system relocates the sealing surface inward near the carrier where shaft movement is significantly reduced. This creates a more stable sealing environment and improves long-term reliability in high-articulation steering axle applications. Using a common Dana 60 inner seal also improves serviceability by allowing replacements to be sourced easily when needed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e","brand":"Crane Axle","offers":[{"title":"Default Title","offer_id":54639929164051,"sku":"CAREV14N","price":190.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/CAREV14-Rev-30_35-Spline-GM-14-Bolt-Axle-Seal-Kit-1_763113b0-bd74-4adc-aa02-a44f9113da47.jpg?v=1789654507"},{"product_id":"yukon-dana-70u-master-overhaul-kit","title":"Yukon Dana 70U Master Overhaul Kit for Rear Differentials","description":"\u003cp\u003eThe \u003cstrong\u003eYukon Master Overhaul Kit for Dana 70U Rear Axles\u003c\/strong\u003e includes the bearings, races, seals, shims, hardware, and setup materials needed to properly rebuild or install gears in a compatible Dana 70U rear differential. Built around quality Timken bearings and races, this complete kit helps restore proper carrier preload, pinion preload, backlash, and dependable operation in heavy-duty trucks, tow rigs, vans, commercial vehicles, and off-road builds.\u003c\/p\u003e\n\n\u003cp\u003eDana 70U axles regularly operate under substantial load from towing, payload weight, oversized tires, and high-torque drivetrains. Replacing the critical wear components during a rebuild or gear change gives the installer the parts needed to establish the correct bearing preload and gear pattern instead of reusing components that may already be worn or fatigued.\u003c\/p\u003e\n\n\u003ch4\u003eIncludes:\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eCarrier Bearings and Races\u003c\/li\u003e\n  \u003cli\u003ePinion Bearings and Races\u003c\/li\u003e\n  \u003cli\u003ePinion Seal\u003c\/li\u003e\n  \u003cli\u003eComplete Shim Kit\u003c\/li\u003e\n  \u003cli\u003eRing Gear Bolts\u003c\/li\u003e\n  \u003cli\u003ePinion Nut\u003c\/li\u003e\n  \u003cli\u003eOil Baffles and Slingers\u003c\/li\u003e\n  \u003cli\u003eThread Locker\u003c\/li\u003e\n  \u003cli\u003eGear Marking Compound with Brush\u003c\/li\u003e\n  \u003cli\u003eDifferential Gasket\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eSpecifications \u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n    \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n    \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n  \u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\n  \u003cdiv class=\"details-content rte\"\u003e\n    \u003ctable class=\"custom-specs-table\"\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003cth\u003eSpecification\u003c\/th\u003e\n          \u003cth\u003eDetails\u003c\/th\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eManufacturer\u003c\/td\u003e\n          \u003ctd\u003eYukon Gear \u0026amp; Axle\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eProduct Type\u003c\/td\u003e\n          \u003ctd\u003eMaster Differential Overhaul Kit\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eAxle Application\u003c\/td\u003e\n          \u003ctd\u003eDana Spicer 70U Rear Differential\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eAxle Spline Compatibility\u003c\/td\u003e\n          \u003ctd\u003e32-Spline and 35-Spline Applications\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eBearing Brand\u003c\/td\u003e\n          \u003ctd\u003eTimken\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eInner Pinion Bearing Configuration\u003c\/td\u003e\n          \u003ctd\u003eHM803110 \/ HM803149\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eCarrier Bearing Configuration\u003c\/td\u003e\n          \u003ctd\u003e382S \/ 387A\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eRecommended Service\u003c\/td\u003e\n          \u003ctd\u003eDifferential Rebuild or Ring-and-Pinion Installation\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eAxle Position\u003c\/td\u003e\n          \u003ctd\u003eRear\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eFitment \u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n    \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n    \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n  \u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\n  \u003cdiv class=\"details-content rte\"\u003e\n    \u003ctable class=\"custom-specs-table\"\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003cth\u003eYear\u003c\/th\u003e\n          \u003cth\u003eMake\u003c\/th\u003e\n          \u003cth\u003eModel\u003c\/th\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e1984–1990\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eG30\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e1971–1980\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eB300\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e1981–1994\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eB350\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e1984–1993\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eD250\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e1981–1993\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eD350\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e1994–2002\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eRam 2500\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e1994–2002\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eRam 3500\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e1999–2003\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eRam 2500 Van\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e1999–2003\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eRam 3500 Van\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e1984–1993\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eW250\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e1984–1993\u003c\/td\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eW350\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e1982–1998\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eE-350 Econoline\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e1999\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eE-350 Econoline Club Wagon\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e2000–2012\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eE-350 Super Duty\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e1970–2002\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-350\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e1999–2002\u003c\/td\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-350 Super Duty\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e1984–1990\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eC3500\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e1973–1991\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eG35 \/ G3500\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e1984–1990\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eK3500\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e1987\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eR3500\u003c\/td\u003e\n\u003c\/tr\u003e\n        \u003ctr\u003e\n\u003ctd\u003e1987\u003c\/td\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eV3500\u003c\/td\u003e\n\u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n\n    \u003ch3\u003eFitment Notes\u003c\/h3\u003e\n    \u003cul\u003e\n      \u003cli\u003eFits Dana 70U rear differential applications only.\u003c\/li\u003e\n      \u003cli\u003eCompatible with listed 32-spline and 35-spline Dana 70U axle configurations.\u003c\/li\u003e\n      \u003cli\u003eVehicle year, make, and model alone do not guarantee axle fitment.\u003c\/li\u003e\n      \u003cli\u003eVerify the axle identification, carrier bearing numbers, pinion bearing configuration, and spline count before ordering.\u003c\/li\u003e\n      \u003cli\u003eAxles may have been replaced or swapped during the vehicle's service life.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n  \u003csummary\u003e\u003cstrong\u003eTech Insight \u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n    \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n    \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n  \u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\n  \u003cdiv class=\"details-content rte\"\u003e\n    \u003ch3\u003e1. When should I install a master overhaul kit?\u003c\/h3\u003e\n    \u003cp\u003eA master overhaul kit should be used when rebuilding the differential, replacing a damaged bearing, or installing a new ring-and-pinion set. Replacing the bearings, races, seals, shims, and hardware together gives the installer a consistent foundation for setting up the differential.\u003c\/p\u003e\n\n    \u003ch3\u003e2. Why should the old bearings not be reused during a gear change?\u003c\/h3\u003e\n    \u003cp\u003eUsed bearings may have wear patterns, looseness, or surface damage that can affect preload and gear alignment. Reusing worn components can contribute to gear noise, excessive heat, and shortened ring-and-pinion life.\u003c\/p\u003e\n\n    \u003ch3\u003e3. Does this kit fit every Dana 70 axle?\u003c\/h3\u003e\n    \u003cp\u003eNo. This kit is specifically listed for Dana 70U rear differential applications using the bearing configurations shown in the specifications. Other Dana 70 variants may use different carrier bearings, pinion bearings, seals, or setup components.\u003c\/p\u003e\n\n    \u003ch3\u003e4. Can this kit be used with both 32-spline and 35-spline axles?\u003c\/h3\u003e\n    \u003cp\u003eYes, the supplied fitment information lists compatibility with both 32-spline and 35-spline Dana 70U applications. The axle model and bearing configuration should still be verified before ordering.\u003c\/p\u003e\n\n    \u003ch3\u003e5. What measurements must be set during installation?\u003c\/h3\u003e\n    \u003cp\u003eA proper differential setup requires accurate pinion depth, pinion bearing preload, carrier bearing preload, ring gear backlash, and contact pattern. These adjustments require the correct measuring tools and should be completed by an experienced installer.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e","brand":"Yukon Gear \u0026 Axle","offers":[{"title":"Default Title","offer_id":54639929196819,"sku":"YK D70-U","price":410.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/Dana-70U-master-overhaul-kit-1.jpg?v=1789425028"},{"product_id":"yukon-dana-80-bearing-install-kit-4-125in-od","title":"Yukon Dana 80 Bearing Install Kit - 4.125\" OD Bearing","description":"\u003cp\u003eThe \u003cstrong\u003eYukon Dana 80 Bearing Install Kit – 4.125\" OD Inner Pinion Bearing Race\u003c\/strong\u003e is designed for professional differential builders and experienced enthusiasts performing ring and pinion installations or bearing service on Dana 80 rear differentials. Rather than supplying every overhaul component, this install kit focuses on the premium bearings, races, seals, and essential installation materials required during gear setup while allowing builders to utilize their preferred shim kits.\u003c\/p\u003e\n\u003cp\u003eFeaturing genuine Timken bearings and races, this kit provides the components needed to establish proper carrier support, pinion bearing preload, and long-term gear reliability. It is an excellent choice for towing vehicles, heavy-duty work trucks, off-road rigs, and custom axle builds utilizing Dana 80 rear axle assemblies with a 4.125-inch outer diameter inner pinion bearing race.\u003c\/p\u003e\n\u003ch4\u003eIncludes:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eCarrier Bearings and Races\u003c\/li\u003e\n\u003cli\u003ePinion Bearings and Races\u003c\/li\u003e\n\u003cli\u003ePinion Seal\u003c\/li\u003e\n\u003cli\u003eGear Marking Compound with Brush\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eYukon Gear \u0026amp; Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eBearing Install Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDifferential\u003c\/td\u003e\n\u003ctd\u003eDana Spicer 80 Rear Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Pinion Bearing Race\u003c\/td\u003e\n\u003ctd\u003e4.125\" Outside Diameter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBearings\u003c\/td\u003e\n\u003ctd\u003ePremium Timken Bearings and Races\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Pinion Bearing Set\u003c\/td\u003e\n\u003ctd\u003eHM807046 \/ HM807010\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpline Compatibility\u003c\/td\u003e\n\u003ctd\u003e35 Spline and 37 Spline Applications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Position\u003c\/td\u003e\n\u003ctd\u003eRear Only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eRing and Pinion Installation \u0026amp; Bearing Service\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShim Kit Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eC3500, C3500HD, C4500 Kodiak, Express 3500, G30, K3500, P30\u003c\/td\u003e\n\u003ctd\u003e1990–2009*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eB3500, Ram 2500, Ram 2500 Van, Ram 3500\u003c\/td\u003e\n\u003ctd\u003e1994–2003*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eE-350 Econoline, F-350, F-Super Duty\u003c\/td\u003e\n\u003ctd\u003e1988–1998*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eC3500, C3500HD, K3500, P3500\u003c\/td\u003e\n\u003ctd\u003e1992–2002*\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFits Dana 80 rear differential applications only.\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for housings utilizing a 4.125\" outside diameter inner pinion bearing race.\u003c\/li\u003e\n\u003cli\u003eCompatible with both 35-spline and 37-spline Dana 80 axle configurations where applicable.\u003c\/li\u003e\n\u003cli\u003eVerify axle model, spline count, and pinion bearing dimensions before ordering.\u003c\/li\u003e\n\u003cli\u003e*Vehicle applications should always be confirmed by axle model and bearing dimensions, as Dana 80 specifications can vary by production year and application.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ch3\u003e1. Why replace bearings during a ring and pinion installation?\u003c\/h3\u003e\n\u003cp\u003eNew bearings provide a stable foundation for accurate pinion preload and carrier bearing preload. Reusing worn bearings can alter gear mesh, increase operating temperatures, and shorten the life of the new ring and pinion.\u003c\/p\u003e\n\u003ch3\u003e2. Why does the Dana 80 require the correct inner pinion bearing size?\u003c\/h3\u003e\n\u003cp\u003eDana 80 axles were produced with multiple bearing configurations. Verifying the required 4.125-inch outer diameter inner pinion bearing race ensures the bearings properly fit the housing and support the pinion under heavy loads.\u003c\/p\u003e\n\u003ch3\u003e3. Why are Timken bearings preferred for differential builds?\u003c\/h3\u003e\n\u003cp\u003eTimken tapered roller bearings are manufactured to tight tolerances that help maintain proper gear alignment under towing, commercial hauling, and high-torque off-road conditions while providing long service life.\u003c\/p\u003e\n\u003ch3\u003e4. Why doesn't this install kit include setup shims?\u003c\/h3\u003e\n\u003cp\u003eMany professional builders maintain their own shim inventories or reuse setup bearings during gear installation. This kit focuses on the premium bearings, races, seal, and installation materials most commonly replaced during differential service.\u003c\/p\u003e\n\u003ch3\u003e5. What should be verified before final differential assembly?\u003c\/h3\u003e\n\u003cp\u003eAlways confirm pinion bearing preload, carrier bearing preload, backlash, gear tooth contact pattern, and bearing fitment before final assembly. Proper differential setup is essential for quiet operation, maximum gear life, and reliable performance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e","brand":"Yukon Gear \u0026 Axle","offers":[{"title":"Default Title","offer_id":54639929688339,"sku":"BK D80-A","price":507.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/9bef8ed33586c0b14f5d11fa60c79b31.jpg?v=1789652792"},{"product_id":"yukon-dana-80-master-overhaul-kit-4-125-in-od-bearing","title":"Yukon Dana 80 Rear Master Overhaul Kit- 4.125\" Pinion Bearing","description":"\u003cp\u003eThe \u003cstrong\u003eDana 80 Rear Master Overhaul Kit\u003c\/strong\u003e provides the bearings, races, seal, shims, and setup hardware needed for a complete Dana 80 rear differential rebuild. This version is specifically designed for housings using a \u003cstrong\u003e4.125\" outer-diameter inner pinion bearing race\u003c\/strong\u003e and includes Timken bearing components for dependable service in heavy-duty truck, towing, commercial, and off-road applications.\u003c\/p\u003e\n\n\u003cp\u003eBecause Dana 80 axles were produced with multiple pinion bearing configurations, verifying the inner pinion bearing race size is critical before ordering. This kit uses the HM807046 \/ HM807010 inner pinion bearing set and includes the hardware and setup materials required to establish proper pinion preload, carrier preload, backlash, and ring-and-pinion contact pattern during assembly.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCarrier Bearings and Races\u003c\/li\u003e\n\u003cli\u003ePinion Bearings and Races\u003c\/li\u003e\n\u003cli\u003ePinion Seal\u003c\/li\u003e\n\u003cli\u003eComplete Shim Kit\u003c\/li\u003e\n\u003cli\u003eRing Gear Bolts\u003c\/li\u003e\n\u003cli\u003ePinion Nut\u003c\/li\u003e\n\u003cli\u003eOil Baffles and Slingers\u003c\/li\u003e\n\u003cli\u003eThread Locker\u003c\/li\u003e\n\u003cli\u003eGear Marking Compound with Brush\u003c\/li\u003e\n\u003cli\u003eSilicone Sealant\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eSpecifications \u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eMaster Differential Overhaul Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Application\u003c\/td\u003e\n\u003ctd\u003eDana 80 Rear Differential\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePosition\u003c\/td\u003e\n\u003ctd\u003eRear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Pinion Bearing Race OD\u003c\/td\u003e\n\u003ctd\u003e4.125\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner Pinion Bearing Set\u003c\/td\u003e\n\u003ctd\u003eHM807046 \/ HM807010\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBearing Manufacturer\u003c\/td\u003e\n\u003ctd\u003eTimken\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Spline Compatibility\u003c\/td\u003e\n\u003ctd\u003e35-Spline and 37-Spline Applications, Depending on Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCarrier Bearings and Races\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePinion Bearings and Races\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePinion Seal\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShim Kit\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRing Gear Bolts\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePinion Nut\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOil Baffles and Slingers\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSetup Materials\u003c\/td\u003e\n\u003ctd\u003eThread Locker, Gear Marking Compound with Brush, and Silicone Sealant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFitment \u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eC3500\u003c\/td\u003e\n\u003ctd\u003e1992–2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eC3500HD\u003c\/td\u003e\n\u003ctd\u003e1991–2002\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eG30\u003c\/td\u003e\n\u003ctd\u003e1992–1995\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eK3500\u003c\/td\u003e\n\u003ctd\u003e1990–1998\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eP30\u003c\/td\u003e\n\u003ctd\u003e1997–1999\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eB3500\u003c\/td\u003e\n\u003ctd\u003e1995–1998\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eRam 2500\u003c\/td\u003e\n\u003ctd\u003e1994–2002\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eRam 2500 Van\u003c\/td\u003e\n\u003ctd\u003e1999–2003\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eRam 3500\u003c\/td\u003e\n\u003ctd\u003e1994–2002\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eE-350 Econoline\u003c\/td\u003e\n\u003ctd\u003e1988–1998\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-350\u003c\/td\u003e\n\u003ctd\u003e1988–1997\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-Super Duty\u003c\/td\u003e\n\u003ctd\u003e1990–1997\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eC3500\u003c\/td\u003e\n\u003ctd\u003e1992–2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eC3500HD\u003c\/td\u003e\n\u003ctd\u003e2001–2002\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eK3500\u003c\/td\u003e\n\u003ctd\u003e1992–2000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eP3500\u003c\/td\u003e\n\u003ctd\u003e1997–1999\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits Dana 80 rear differential applications only.\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for housings using a 4.125\" OD inner pinion bearing race.\u003c\/li\u003e\n\u003cli\u003eUses HM807046 \/ HM807010 inner pinion bearing components.\u003c\/li\u003e\n\u003cli\u003eCompatible with 35-spline and 37-spline axle configurations depending on application.\u003c\/li\u003e\n\u003cli\u003eVehicle year and model do not guarantee fitment because Dana 80 axles were produced with multiple bearing and housing configurations.\u003c\/li\u003e\n\u003cli\u003eVerify the actual axle model, inner pinion bearing race OD, spline count, and differential configuration before ordering.\u003c\/li\u003e\n\u003cli\u003eAxle swaps are common in heavy-duty and off-road builds, so identify the axle itself rather than relying only on the vehicle application.\u003c\/li\u003e\n\u003cli\u003eProfessional differential setup is recommended because pinion depth, bearing preload, backlash, and gear contact pattern must be established accurately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cb\u003eFAQ\u003c\/b\u003e \u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ch3\u003eHow do I know which Dana 80 master overhaul kit I need?\u003c\/h3\u003e\n\u003cp\u003eThe inner pinion bearing race size is one of the key identifiers. This kit is specifically for Dana 80 housings using a 4.125\" outer-diameter inner pinion bearing race and the HM807046 \/ HM807010 bearing set.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is included in a Dana 80 master overhaul kit?\u003c\/h3\u003e\n\u003cp\u003eThis kit includes the carrier and pinion bearings and races, pinion seal, shims, ring gear bolts, pinion nut, oil baffles and slingers, thread locker, gear marking compound, and silicone sealant needed for a complete differential rebuild and setup.\u003c\/p\u003e\n\n\u003ch3\u003eWill this kit fit both 35-spline and 37-spline Dana 80 axles?\u003c\/h3\u003e\n\u003cp\u003eIt can be compatible with both 35-spline and 37-spline Dana 80 applications, but spline count alone does not determine kit fitment. The housing and pinion bearing configuration must also match.\u003c\/p\u003e\n\n\u003ch3\u003eWhy does the inner pinion bearing size matter on a Dana 80?\u003c\/h3\u003e\n\u003cp\u003eDana 80 axles use more than one pinion bearing configuration. The inner race must match the machined bore in the housing, so installing the wrong bearing set can prevent proper assembly and pinion support.\u003c\/p\u003e\n\n\u003ch3\u003eDo I need a master overhaul kit when installing new Dana 80 gears?\u003c\/h3\u003e\n\u003cp\u003eA complete overhaul kit is recommended when changing gears or rebuilding a high-mileage axle because accurate pinion preload, carrier preload, backlash, and tooth contact depend on fresh bearings and correct setup hardware.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e","brand":"Yukon Gear \u0026 Axle","offers":[{"title":"Default Title","offer_id":54639929884947,"sku":"YK D80-A","price":638.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/28f4ccbd9ad5c06265901028c33accfbL.jpg?v=1789652838"},{"product_id":"master-overhaul-kit-jeep-wrangler-jl-dana-35-200mm-rear-diff","title":"Yukon Jeep Wrangler JL Rear Master Overhaul Kit - 2018+ Dana 35 \/ M200","description":"\u003cp class=\"p1\"\u003eRebuild your Jeep Wrangler JL Dana 35 \/ M200 rear differential with confidence using this complete Master Overhaul Kit. Designed specifically for 2018-present Jeep Wrangler JL rear axle applications equipped with the Dana 35 (M200) rear differential, this kit includes the critical bearings, races, seals, shims, and installation components needed for a complete differential rebuild or ring and pinion installation.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003eWhether you're replacing worn bearings, installing new gears for larger tires, repairing differential noise, or performing preventative maintenance, this overhaul kit provides the components needed to properly restore your axle. Premium Timken bearings and races deliver long-term durability, while the thoughtfully engineered shim packs and setup components help achieve accurate gear setup and optimal tooth contact patterns. Ideal for daily drivers, overland builds, trail rigs, and weekend wheeling Jeeps.\u003c\/p\u003e\n\u003cp class=\"p3\"\u003e\u003cb\u003eIncludes\u003c\/b\u003e\u003c\/p\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li1\"\u003eCarrier Bearings \u0026amp; Races\u003c\/li\u003e\n\u003cli class=\"li1\"\u003ePinion Bearings \u0026amp; Races\u003c\/li\u003e\n\u003cli class=\"li1\"\u003ePinion Seal\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eCrush Sleeve\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eComplete Shim Kit\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eRing Gear Bolts\u003c\/li\u003e\n\u003cli class=\"li1\"\u003ePinion Nut\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eThread Locker\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eGear Marking Compound with Brush\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eInstallation Components\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eSpecifications \u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n          \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n          \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li1\"\u003eFits Dana 35 \/ M200 Rear Differential\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eYukon Part Number: YK D35JL-REAR\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eFits 2018-Present Jeep Wrangler JL Applications\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eRear Differential Application\u003c\/li\u003e\n\u003cli class=\"li1\"\u003ePremium Timken Bearings \u0026amp; Races\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eIncludes Crush Sleeve and Pinion Seal\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eComplete Shim Kit Included\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eRing Gear Bolts Included\u003c\/li\u003e\n\u003cli class=\"li1\"\u003eDesigned for Ring \u0026amp; Pinion Installations and Differential Rebuilds\u003c\/li\u003e\n\u003cli class=\"li1\"\u003ePrecision Shim Packs for Accurate Gear Setup\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFitment \u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n          \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n          \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable cellspacing=\"0\" cellpadding=\"0\" class=\"t1\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p1\"\u003e\u003cb\u003eYear\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p1\"\u003e\u003cb\u003eMake\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p1\"\u003e\u003cb\u003eModel\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003e2018-2024\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003eJeep\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003eWrangler Sport\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003e2018-2024\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003eJeep\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003eWrangler Sport S\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003e2018-2022\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003eJeep\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003eWrangler Unlimited Sahara\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003e2018-2022\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003eJeep\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003eWrangler Unlimited Sport\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003e2018-2022\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003eJeep\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd valign=\"top\" class=\"td1\"\u003e\n\u003cp class=\"p2\"\u003eWrangler Unlimited Sport S\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp class=\"p1\"\u003e\u003cb\u003eFitment Notes\u003c\/b\u003e\u003c\/p\u003e\n\u003cul class=\"ul1\"\u003e\n\u003cli class=\"li2\"\u003eFits Dana 35 \/ M200 Rear Differentials Only\u003c\/li\u003e\n\u003cli class=\"li2\"\u003eFits Jeep Wrangler JL Applications\u003c\/li\u003e\n\u003cli class=\"li2\"\u003eRear Axle Applications Only\u003c\/li\u003e\n\u003cli class=\"li2\"\u003eVerify axle before ordering\u003c\/li\u003e\n\u003cli class=\"li2\"\u003eNot designed for Rubicon Dana 44 rear axle applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cb id=\"docs-internal-guid-785e0e5c-7fff-2ba3-1543-a8eda468b24e\"\u003e\u003cspan\u003eTech Insight\u003c\/span\u003e\u003c\/b\u003e \u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n          \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n          \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003cp class=\"p1\"\u003e\u003cb\u003eDoes this kit include everything needed to install new gears?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eThis kit includes the bearings, races, seals, shims, crush sleeve, ring gear bolts, and installation components needed for most gear installations. Ring and pinion gears are sold separately.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cb\u003eWill this fit a Jeep Wrangler JL Rubicon?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eNo. Rubicon models typically use a Dana 44 rear axle. This kit is designed specifically for Dana 35 \/ M200 rear differential applications.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cb\u003eAre Timken bearings included?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eYes. This kit includes premium Timken bearings and races for long-term durability and reliability.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cb\u003eShould I replace bearings when installing new gears?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eYes. Replacing bearings, races, seals, and setup components during a gear installation is considered best practice and helps ensure proper setup and maximum gear life.\u003c\/p\u003e\n\u003cp class=\"p1\"\u003e\u003cb\u003eHow do I verify that I have a Dana 35 \/ M200 rear axle?\u003c\/b\u003e\u003c\/p\u003e\n\u003cp class=\"p2\"\u003eCheck the axle tag, build sheet, or differential housing identification before ordering. If you're unsure, contact us with your vehicle information and we can help verify fitment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e","brand":"Yukon Gear \u0026 Axle","offers":[{"title":"Default Title","offer_id":54639929917715,"sku":"YK D35JL-REAR","price":225.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/993ff8f2cb4f50c3f54bb3d4c3990ff9.jpg?v=1788287911"},{"product_id":"yukon-ford-8-8in-master-overhaul-kit-2015-f150-mustang-irs","title":"Yukon Ford Super 8.8\" Rear Master Overhaul Kit - 2015+ F-150 \u0026 Mustang","description":"\u003cp\u003eThe \u003cstrong\u003eFord Super 8.8\" Rear Master Overhaul Kit\u003c\/strong\u003e provides the bearings, races, seal, shims, and setup components needed for a complete rebuild of 2015 and newer Ford Super 8.8\" rear differentials. Built around Timken bearing components, this kit is intended for gear changes, worn differential service, and complete axle rebuilds where pinion preload, carrier preload, backlash, and gear tooth contact pattern must be reset correctly.\u003c\/p\u003e\n\u003cp\u003eThis kit is designed specifically for the newer-generation \u003cstrong\u003e12-bolt cover Ford Super 8.8\u003c\/strong\u003e used in F-150 solid rear axle and Mustang IRS applications. Because the Mustang IRS uses additional stub axle seals and needle bearings outside the core differential rebuild, those components are sold separately and should be matched to the specific IRS configuration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCarrier Bearings and Races\u003c\/li\u003e\n\u003cli\u003ePinion Bearings and Races\u003c\/li\u003e\n\u003cli\u003ePinion Seal\u003c\/li\u003e\n\u003cli\u003eComplete Shim Kit\u003c\/li\u003e\n\u003cli\u003eRing Gear Bolts\u003c\/li\u003e\n\u003cli\u003ePinion Nut\u003c\/li\u003e\n\u003cli\u003eCrush Sleeve\u003c\/li\u003e\n\u003cli\u003eThread Locker\u003c\/li\u003e\n\u003cli\u003eGear Marking Compound with Brush\u003c\/li\u003e\n\u003cli\u003eDifferential Gasket and Sealing Components\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMustang IRS stub axle seals and needle bearings are sold separately.\u003c\/li\u003e\n\u003cli\u003eFits 12-bolt cover Ford Super 8.8\" applications only.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eSpecifications \u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eMaster Differential Overhaul Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Application\u003c\/td\u003e\n\u003ctd\u003eFord Super 8.8\" Rear Differential\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Year Range\u003c\/td\u003e\n\u003ctd\u003e2015+\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePosition\u003c\/td\u003e\n\u003ctd\u003eRear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCover Bolt Count\u003c\/td\u003e\n\u003ctd\u003e12 Bolt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBearing Manufacturer\u003c\/td\u003e\n\u003ctd\u003eTimken\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Configuration\u003c\/td\u003e\n\u003ctd\u003eSolid Axle or IRS, Depending on Vehicle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCarrier Bearings and Races\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePinion Bearings and Races\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePinion Seal\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShim Kit\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRing Gear Bolts\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrush Sleeve\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePinion Nut\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSetup Materials\u003c\/td\u003e\n\u003ctd\u003eThread Locker and Gear Marking Compound with Brush\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMustang IRS Stub Axle Seals\u003c\/td\u003e\n\u003ctd\u003eSold Separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMustang IRS Needle Bearings\u003c\/td\u003e\n\u003ctd\u003eSold Separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFitment \u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003cth\u003eRear Axle Configuration\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-150\u003c\/td\u003e\n\u003ctd\u003e2015–2023\u003c\/td\u003e\n\u003ctd\u003eSuper 8.8 Solid Rear Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eMustang\u003c\/td\u003e\n\u003ctd\u003e2015–2023\u003c\/td\u003e\n\u003ctd\u003eSuper 8.8 IRS Rear Differential\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits Ford Super 8.8\" rear differential applications only.\u003c\/li\u003e\n\u003cli\u003eDesigned for 12-bolt cover housings.\u003c\/li\u003e\n\u003cli\u003eCompatible with 2015+ F-150 solid rear axle applications.\u003c\/li\u003e\n\u003cli\u003eCompatible with 2015+ Mustang IRS rear differential applications.\u003c\/li\u003e\n\u003cli\u003eMustang IRS stub axle seals and needle bearings are not included and must be purchased separately when required.\u003c\/li\u003e\n\u003cli\u003eDo not assume compatibility with earlier Ford 8.8 axle housings; the Super 8.8 uses a newer bearing and housing configuration.\u003c\/li\u003e\n\u003cli\u003eVerify housing style, cover bolt count, bearing configuration, and axle type before ordering.\u003c\/li\u003e\n\u003cli\u003eProfessional differential setup is recommended because pinion depth, bearing preload, backlash, and gear contact pattern must be established accurately.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cb\u003eFAQ\u003c\/b\u003e \u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ch3\u003eWhat is the difference between a Ford 8.8 and a Super 8.8?\u003c\/h3\u003e\n\u003cp\u003eThe Super 8.8 is the newer-generation Ford rear differential used in 2015+ applications and uses updated housing, bearing, and cover designs compared with many earlier Ford 8.8 axles. This kit is specifically for the newer 12-bolt cover Super 8.8 configuration.\u003c\/p\u003e\n\u003ch3\u003eWill this kit fit both the F-150 and Mustang?\u003c\/h3\u003e\n\u003cp\u003eYes, the supplied fitment covers 2015+ F-150 Super 8.8 solid rear axle applications and 2015+ Mustang Super 8.8 IRS differentials. The Mustang IRS uses additional stub axle seals and needle bearings that are sold separately.\u003c\/p\u003e\n\u003ch3\u003eDo I need a master overhaul kit when changing gears in a Ford Super 8.8?\u003c\/h3\u003e\n\u003cp\u003eA master overhaul kit is recommended during a gear change because proper setup depends on fresh bearings, a new crush sleeve, correct shims, and accurate pinion and carrier preload.\u003c\/p\u003e\n\u003ch3\u003eWhy are Mustang IRS stub axle seals and needle bearings sold separately?\u003c\/h3\u003e\n\u003cp\u003eThose components are part of the IRS-specific axle interface rather than the core differential bearing package, and their configuration can vary by Mustang application.\u003c\/p\u003e\n\u003ch3\u003eCan I install a Ford Super 8.8 rebuild kit myself?\u003c\/h3\u003e\n\u003cp\u003eAn experienced builder with the correct setup tools can perform the rebuild, but differential setup requires precise adjustment of pinion depth, pinion preload, carrier preload, backlash, and gear tooth contact pattern. Professional installation is recommended if you are not experienced with ring-and-pinion setup.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e","brand":"Yukon Gear \u0026 Axle","offers":[{"title":"Default Title","offer_id":54639929983251,"sku":"YK F8.8-D","price":447.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/2015-Ford-8.8-maaster-rebuild-kit-1.jpg?v=1788283729"},{"product_id":"yukon-dana-44-master-overhaul-kit-jk-rubicon-rear-diff","title":"Yukon Dana 44 Rear Master Overhaul Kit for Jeep JK Rubicon '07-'17","description":"\u003cp\u003eThe \u003cstrong\u003eYukon Dana 44 Rear Master Overhaul Kit for 2007–2017 Jeep JK Rubicon\u003c\/strong\u003e provides the bearings, races, seals, shims, and setup hardware commonly replaced during a rear differential rebuild or gear installation. Designed specifically for the factory Dana 44 rear axle used in JK Rubicon models, this kit is a complete service package for restoring proper bearing support, preload, backlash, and sealing during differential work.\u003c\/p\u003e\n\u003cp\u003eJK Rubicon rear axles often see added load from larger tires, deeper gearing, lockers, towing, and off-road use. Replacing the major wear and setup components during a rebuild helps give the ring and pinion a stable foundation and makes it easier to establish the correct differential setup from the start.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCarrier Bearings \u0026amp; Races\u003c\/li\u003e\n\u003cli\u003ePinion Bearings \u0026amp; Races\u003c\/li\u003e\n\u003cli\u003ePinion Seal\u003c\/li\u003e\n\u003cli\u003eComplete Shim Kit\u003c\/li\u003e\n\u003cli\u003eRing Gear Bolts\u003c\/li\u003e\n\u003cli\u003ePinion Nut\u003c\/li\u003e\n\u003cli\u003eCrush Sleeve\u003c\/li\u003e\n\u003cli\u003eOil Baffles \u0026amp; Slingers\u003c\/li\u003e\n\u003cli\u003eThread Locker\u003c\/li\u003e\n\u003cli\u003eGear Marking Compound with Brush\u003c\/li\u003e\n\u003cli\u003eDifferential Gasket\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e \u003cspan class=\"svg-wrapper icon-plus\"\u003e \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n        \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n      \u003c\/svg\u003e \u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eMaster Differential Overhaul Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Platform\u003c\/td\u003e\n\u003ctd\u003eDana 44\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Position\u003c\/td\u003e\n\u003ctd\u003eRear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Platform\u003c\/td\u003e\n\u003ctd\u003eJeep JK Rubicon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eYear Range\u003c\/td\u003e\n\u003ctd\u003e2007–2017\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBearing Brand\u003c\/td\u003e\n\u003ctd\u003eTimken\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCarrier Bearing Numbers\u003c\/td\u003e\n\u003ctd\u003eJLM704610 \/ JLM704649\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eService Type\u003c\/td\u003e\n\u003ctd\u003eDifferential Rebuild \/ Gear Installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Application\u003c\/td\u003e\n\u003ctd\u003eJeep JK Rubicon Dana 44 Rear Differential Service\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e \u003cspan class=\"svg-wrapper icon-plus\"\u003e \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n        \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n      \u003c\/svg\u003e \u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003cth\u003eAxle Application\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eWrangler Rubicon\u003c\/td\u003e\n\u003ctd\u003e2007–2017\u003c\/td\u003e\n\u003ctd\u003eDana 44 Rear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eWrangler Unlimited Rubicon\u003c\/td\u003e\n\u003ctd\u003e2007–2017\u003c\/td\u003e\n\u003ctd\u003eDana 44 Rear\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for the Dana 44 rear axle used in 2007–2017 Jeep JK Rubicon models.\u003c\/li\u003e\n\u003cli\u003eIntended for rear differential rebuilds and ring-and-pinion installation.\u003c\/li\u003e\n\u003cli\u003eFits Wrangler Rubicon and Wrangler Unlimited Rubicon applications equipped with the applicable factory rear axle.\u003c\/li\u003e\n\u003cli\u003eDoes not fit the front reverse-rotation Dana 44.\u003c\/li\u003e\n\u003cli\u003eVerify the axle assembly before ordering if the vehicle has been modified or axle-swapped.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e \u003cspan class=\"svg-wrapper icon-plus\"\u003e \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n        \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n      \u003c\/svg\u003e \u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ch3\u003eWhat is included in a master differential overhaul kit?\u003c\/h3\u003e\n\u003cp\u003eThis kit includes the major bearings, races, seals, shims, hardware, and setup materials commonly replaced when rebuilding the rear differential or installing a new ring and pinion.\u003c\/p\u003e\n\u003ch3\u003eDoes this kit include Timken bearings?\u003c\/h3\u003e\n\u003cp\u003eYes. The supplied product information identifies Timken bearings and races as part of the overhaul kit.\u003c\/p\u003e\n\u003ch3\u003eWill this fit the front Dana 44 in a JK Rubicon?\u003c\/h3\u003e\n\u003cp\u003eNo. This kit is designed for the rear Dana 44. It does not fit the front reverse-rotation Dana 44 application.\u003c\/p\u003e\n\u003ch3\u003eShould the bearings and crush sleeve be replaced during a gear install?\u003c\/h3\u003e\n\u003cp\u003eThese components are commonly replaced during differential service so pinion preload, carrier support, and gear setup can be established with fresh service parts rather than reused wear components.\u003c\/p\u003e\n\u003ch3\u003eWhy is differential setup important on a JK Rubicon rear axle?\u003c\/h3\u003e\n\u003cp\u003eProper bearing preload, backlash, and gear tooth contact are critical to ring-and-pinion life and noise control, especially in vehicles running larger tires, deeper gear ratios, lockers, or frequent off-road use.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e","brand":"Yukon Gear \u0026 Axle","offers":[{"title":"Default Title","offer_id":54639930016019,"sku":"YK D44-JK-RUB","price":486.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/Dana-44-rear-overhaul-kit-JK-Rubicon-1.jpg?v=1788972857"},{"product_id":"spicer-dana-60-kingpin-partial-rebuild-kit-lower-front-knuckle-one-side","title":"Spicer Dana 60 Lower Kingpin Partial Rebuild Kit – Single Side","description":"\u003cp\u003eThe \u003cstrong\u003eSpicer Dana 60 Lower Kingpin Partial Rebuild Kit\u003c\/strong\u003e is engineered to service and restore the lower knuckle assembly on kingpin-style Dana 60 front axles. Built from genuine Spicer OE-grade drivetrain components, this kit replaces worn lower bearings, races, and seals that degrade over time from heavy steering loads, trail shock, and environmental contamination. Whether you are performing routine maintenance or correcting steering wander on a heavy-duty tow rig or dedicated rock crawler, this kit provides the reliable foundation needed for precise steering control.\u003c\/p\u003e\n\u003cp\u003eThe lower kingpin assembly supports the majority of the vehicle's vertical weight and absorbs intense lateral loads when turning oversized off-road tires. Worn lower bearings and compromised seals introduce knuckle play, death wobble, and abrasive grit that can quickly destroy your front end. Rebuilding with genuine Spicer components restores proper kingpin bearing preload, eliminates steering looseness, and seals out mud, sand, and water on the trail.\u003c\/p\u003e\n\u003ch4\u003eIncludes:\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Lower Kingpin Cap\u003c\/li\u003e\n\u003cli\u003e(1) Lower Kingpin Bearing and Race\u003c\/li\u003e\n\u003cli\u003e(1) Lower Kingpin Seal\u003c\/li\u003e\n\u003cli\u003e(1) Upper Kingpin Seal \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This kit services one lower knuckle assembly and is sold per side. Order two kits to service an entire front axle.\u003c\/p\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e \u003cspan class=\"svg-wrapper icon-plus\"\u003e \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n        \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n      \u003c\/svg\u003e \u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eSpicer (Genuine OE Drivetrain)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Compatibility\u003c\/td\u003e\n\u003ctd\u003eKingpin-Style Dana 60 Front Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication Type\u003c\/td\u003e\n\u003ctd\u003eLower Knuckle Assembly Rebuild\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded Bearing Type\u003c\/td\u003e\n\u003ctd\u003eTapered Roller Bearing \u0026amp; Matched Race\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSealing Components\u003c\/td\u003e\n\u003ctd\u003e(1) Upper Kingpin Seal \u0026amp; (1) Lower Kingpin Seal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication Grade\u003c\/td\u003e\n\u003ctd\u003eHeavy-Duty Street, Towing \u0026amp; Off-Road Competition\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold As\u003c\/td\u003e\n\u003ctd\u003eSingle Side (Services One Knuckle)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e \u003cspan class=\"svg-wrapper icon-plus\"\u003e \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n        \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n      \u003c\/svg\u003e \u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003cp\u003eDesigned for factory and custom-built \u003cstrong\u003ekingpin-style Dana 60 front steering axles\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003cth\u003eAxle Application\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eK30 \/ V30 Pickup \u0026amp; Truck\u003c\/td\u003e\n\u003ctd\u003e1977–1988\u003c\/td\u003e\n\u003ctd\u003eDana 60 Front Kingpin Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eK35 \/ K3500 \/ V3500 Truck\u003c\/td\u003e\n\u003ctd\u003e1977–1987\u003c\/td\u003e\n\u003ctd\u003eDana 60 Front Kingpin Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eW200 \/ W250 \/ W300 \/ W350\u003c\/td\u003e\n\u003ctd\u003e1975–1993\u003c\/td\u003e\n\u003ctd\u003eDana 60 Front Kingpin Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-250 \/ F-350 Super Duty\u003c\/td\u003e\n\u003ctd\u003e1978–1991\u003c\/td\u003e\n\u003ctd\u003eDana 60 Front Kingpin Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCustom Build\u003c\/td\u003e\n\u003ctd\u003eRock Crawlers, Buggies \u0026amp; Trail Rigs\u003c\/td\u003e\n\u003ctd\u003eCustom\u003c\/td\u003e\n\u003ctd\u003eDana 60 Front Kingpin Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFitment Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFits open-knuckle, kingpin-style Dana 60 front axles only. Will not fit later-model ball-joint Dana 60 front axles.\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for servicing the lower knuckle bearing, race, cap, and seals.\u003c\/li\u003e\n\u003cli\u003eAlways inspect your upper kingpin bushing, spring, and kingpin shaft for wear when rebuilding the lower assembly.\u003c\/li\u003e\n\u003cli\u003eSold per side—order two kits to rebuild both driver and passenger side lower knuckles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e \u003cspan class=\"svg-wrapper icon-plus\"\u003e \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n        \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n      \u003c\/svg\u003e \u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ch3\u003e1. Why is the lower kingpin bearing so prone to wear on Dana 60 axles?\u003c\/h3\u003e\n\u003cp\u003eOn a kingpin Dana 60 front axle, the lower tapered roller bearing supports almost the entire vertical weight of the vehicle and takes the direct brunt of road impacts, trail obstacles, and tire side-loading. Over time, heavy tires and hard off-road use compress and wear this bearing, leading to looseness in the steering knuckle.\u003c\/p\u003e\n\u003ch3\u003e2. What is the difference between a \"Partial\" and a full kingpin rebuild kit?\u003c\/h3\u003e\n\u003cp\u003eThis partial rebuild kit focuses specifically on the lower knuckle assembly—providing a fresh lower bearing, race, cap, lower seal, and upper seal. A full master kingpin rebuild kit also includes the upper nylon\/conical kingpin bushing, upper tension spring, spring retainer, and sometimes the physical upper kingpin shaft itself.\u003c\/p\u003e\n\u003ch3\u003e3. How do I know if my Dana 60 lower kingpin bearings need to be replaced?\u003c\/h3\u003e\n\u003cp\u003eCommon symptoms of worn lower kingpin bearings include front-end \"death wobble,\" erratic steering wander, clunking noises when turning over bumps, or visible vertical play between the steering knuckle and the inner C when lifting the tire off the ground.\u003c\/p\u003e\n\u003ch3\u003e4. How many kits do I need to order for a complete front axle service?\u003c\/h3\u003e\n\u003cp\u003eEach kit contains the components required to service \u003cstrong\u003eone side\u003c\/strong\u003e (one steering knuckle) of your Dana 60 front axle. To rebuild both the driver-side and passenger-side lower knuckle assemblies, you will need to order a quantity of two kits.\u003c\/p\u003e\n\u003ch3\u003e5. Why is it important to replace the upper and lower seals during a bearing service?\u003c\/h3\u003e\n\u003cp\u003eWater, mud, sand, and road grime are the primary causes of premature tapered roller bearing failure. The included Spicer upper and lower seals lock grease inside the knuckle assembly while forming a tight barrier against trail contamination and moisture ingress during water crossings.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e","brand":"Dana Limited","offers":[{"title":"Default Title","offer_id":54639937683731,"sku":"706395X","price":95.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/706395X-Dana-60-Kingpin-Partial-Rebuild-Kit-1A.jpg?v=1788281065"},{"product_id":"spicer-king-pin-grease-retainer-dust-cap","title":"Spicer Dana 60 King Pin Grease Retainer Dust Cap","description":"\u003cp\u003eDemand genuine Spicer. Dana’s design, engineering, testing, and manufacturing processes all work together to ensure unmatched performance and reliability. This Dana 60 King Pin Drive Axle Shaft Seal Retainer—also known as a grease retainer or dust cap—is designed to hold the lower king pin bearing and seals securely in place. It keeps lubricating grease contained within the assembly while preventing dirt, water, and debris from entering. Commonly used during king pin rebuilds, these retainers are an essential component for maintaining smooth steering performance and long-term durability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Dana 60 Drive Axle Shaft Seal Retainer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" height=\"14\" width=\"14\"\u003e\u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M2.75 7H11.25\" class=\"vertical\"\u003e\u003c\/path\u003e\u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M7 2.75L7 11.25\" class=\"horizontal\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003cul\u003e\n\u003cli\u003eAxle Type: Dana 60\u003c\/li\u003e\n\u003cli\u003eFunction: Holds lower king pin bearing and seal in place\u003c\/li\u003e\n\u003cli\u003eMaterial: High strength steel\u003c\/li\u003e\n\u003cli\u003eFinish: Protective coating for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eType: Grease Retainer \/ Dust Cap\u003c\/li\u003e\n\u003cli\u003eLocation: Lower king pin position, at the bottom of the steering knuckle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" height=\"14\" width=\"14\"\u003e\u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M2.75 7H11.25\" class=\"vertical\"\u003e\u003c\/path\u003e\u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M7 2.75L7 11.25\" class=\"horizontal\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003cul\u003e\n\u003cli\u003eFits Dana 60 front axle assemblies equipped with king pin knuckles\u003c\/li\u003e\n\u003cli\u003eCompatible with many GM, Ford, and Dodge Dana 60 configurations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eTech Insight\u003c\/strong\u003e \u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" height=\"14\" width=\"14\"\u003e\n          \u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M2.75 7H11.25\" class=\"vertical\"\u003e\u003c\/path\u003e\n          \u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M7 2.75L7 11.25\" class=\"horizontal\"\u003e\u003c\/path\u003e\n        \u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003cp\u003eThe Dana 60 Drive Axle Shaft Seal Retainer plays a vital role in protecting your king pin assembly. Acting as both a bearing cap and grease retainer, it keeps contaminants out and lubrication in, ensuring longer bearing life and reduced maintenance needs. When rebuilding or servicing a Dana 60 front end, replacing this component helps restore factory grade protection and performance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e","brand":"Dana Limited","offers":[{"title":"Default Title","offer_id":54639937716499,"sku":"37305","price":13.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/37305-Spicer-King-Pin-Grease-Retainer-Dust-Cap-1.jpg?v=1788281309"},{"product_id":"crane-axle-gm-dana-60-kingpin-component-kit","title":"Crane Axle GM Dana 60 Complete Kingpin Component Kit with Spring Eliminator","description":"\u003cp\u003eThe \u003cstrong\u003eCrane Axle GM Dana 60 Complete Kingpin Component Kit\u003c\/strong\u003e includes the core components needed to assemble, rebuild, or service a GM Dana 60 kingpin front axle. Designed for factory restorations, custom steering axle builds, and heavy-duty off-road applications, this package combines upper and lower kingpin service components with \u003cstrong\u003eCrane Axle’s Kingpin Spring Eliminator System\u003c\/strong\u003e to restore proper preload, reduce steering play, and improve long-term steering stability.\u003c\/p\u003e\n\u003cp\u003eUnlike oversized axle rebuild kits that include unrelated differential or hub components, this kit focuses specifically on the kingpin assembly. It includes the bushings, cones, seals, bearings, races, trunnions, spindle hardware, and preload components required for GM-style Dana 60 kingpin knuckles while retaining a serviceable OE-style configuration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Crane Axle Kingpin Spring Eliminator Kit\u003c\/li\u003e\n\u003cli\u003e(2) Upper Kingpin Cones with Seals\u003c\/li\u003e\n\u003cli\u003e(2) Upper Kingpin Bushings\u003c\/li\u003e\n\u003cli\u003e(2) Lower Kingpin Bearings, Races, and Seals\u003c\/li\u003e\n\u003cli\u003e(2) Lower Kingpin Caps \/ Trunnions with Hardware\u003c\/li\u003e\n\u003cli\u003e(12) 1\/2\"-20 Spindle Studs, Nuts, and Lock Washers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eSpecifications \u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eCrane Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eComplete Kingpin Component Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAxle Application\u003c\/td\u003e\n\u003ctd\u003eGM Dana 60 Kingpin Front Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePreload System\u003c\/td\u003e\n\u003ctd\u003eCrane Axle Kingpin Spring Eliminator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Components\u003c\/td\u003e\n\u003ctd\u003eKingpin Cones, Bushings, and Seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLower Components\u003c\/td\u003e\n\u003ctd\u003eBearings, Races, Seals, and Trunnions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpindle Hardware\u003c\/td\u003e\n\u003ctd\u003e(12) 1\/2\"-20 Studs, Nuts, and Lock Washers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKnuckle Compatibility\u003c\/td\u003e\n\u003ctd\u003eFactory-Style GM Dana 60 Kingpin Knuckles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eService Type\u003c\/td\u003e\n\u003ctd\u003eKingpin Rebuild or New Axle Assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConfiguration\u003c\/td\u003e\n\u003ctd\u003eOE-Style Serviceable Kingpin Assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended Use\u003c\/td\u003e\n\u003ctd\u003eHeavy-Duty Off-Road, Restoration, and Custom Axle Builds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Origin\u003c\/td\u003e\n\u003ctd\u003eMade in the USA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFitment \u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003cth\u003eAxle Application\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eK30 \/ K3500 4x4\u003c\/td\u003e\n\u003ctd\u003e1977–1991\u003c\/td\u003e\n\u003ctd\u003eGM Dana 60 Kingpin Front Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eK30 \/ K3500 4x4\u003c\/td\u003e\n\u003ctd\u003e1977–1991\u003c\/td\u003e\n\u003ctd\u003eGM Dana 60 Kingpin Front Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eV3500 4x4\u003c\/td\u003e\n\u003ctd\u003e1991\u003c\/td\u003e\n\u003ctd\u003eGM Dana 60 Kingpin Front Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eV3500 4x4\u003c\/td\u003e\n\u003ctd\u003e1991\u003c\/td\u003e\n\u003ctd\u003eGM Dana 60 Kingpin Front Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCustom Builds\u003c\/td\u003e\n\u003ctd\u003eFabricated Steering Axle Applications\u003c\/td\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eGM-Style Dana 60 Kingpin Front Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits GM Dana 60 kingpin front axle assemblies only.\u003c\/li\u003e\n\u003cli\u003eCompatible with factory-style GM kingpin knuckles and inner C assemblies.\u003c\/li\u003e\n\u003cli\u003eNot compatible with Ford Dana 60 kingpin knuckles or ball-joint Dana 60 axles.\u003c\/li\u003e\n\u003cli\u003eIntended for front steering axle applications.\u003c\/li\u003e\n\u003cli\u003eVehicle year, make, and model alone do not guarantee fitment because Dana 60 axles are frequently swapped into other vehicles.\u003c\/li\u003e\n\u003cli\u003eVerify the axle uses GM-style kingpin knuckles, spindle hardware, and lower trunnion components before ordering.\u003c\/li\u003e\n\u003cli\u003eInspect the kingpin bosses, knuckles, bearing bores, and spindle mounting surfaces for damage before assembly.\u003c\/li\u003e\n\u003cli\u003eProper preload and final assembly should be completed by an experienced axle builder or fabricator.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cb\u003eFAQ\u003c\/b\u003e \u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ch3\u003eWhat is included in the Crane Axle GM Dana 60 kingpin kit?\u003c\/h3\u003e\n\u003cp\u003eThe kit includes the major upper and lower kingpin service components, including cones, seals, bushings, bearings, races, lower trunnions, spindle studs and hardware, plus the Crane Axle Kingpin Spring Eliminator Kit.\u003c\/p\u003e\n\u003ch3\u003eWhat does the Kingpin Spring Eliminator System do?\u003c\/h3\u003e\n\u003cp\u003eIt replaces the factory spring-style upper kingpin preload arrangement with a more controlled mechanical setup. This helps maintain consistent preload and reduce steering looseness under larger tires, hydraulic steering loads, and hard off-road use.\u003c\/p\u003e\n\u003ch3\u003eWill this kit fit a Ford Dana 60 kingpin axle?\u003c\/h3\u003e\n\u003cp\u003eNo. This version is designed around GM Dana 60 kingpin knuckles, inner C assemblies, and spindle hardware. Ford Dana 60 kingpin axles use application-specific components and require the corresponding Ford kit.\u003c\/p\u003e\n\u003ch3\u003eCan worn kingpin components contribute to death wobble?\u003c\/h3\u003e\n\u003cp\u003eYes. Worn bushings, bearings, springs, and preload components can create knuckle movement and steering play that contribute to front-end instability. Rebuilding the kingpins can remove one source of looseness, but tires, wheel bearings, steering joints, alignment, and suspension components must also be inspected.\u003c\/p\u003e\n\u003ch3\u003eHow do I confirm that I have a GM Dana 60 kingpin axle?\u003c\/h3\u003e\n\u003cp\u003eVerify the axle uses kingpin-style steering knuckles rather than upper and lower ball joints, then identify the knuckle, inner C, spindle pattern, housing casting, and axle application. Because axle swaps are common, identify the axle itself instead of relying only on the vehicle model.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e","brand":"Crane Axle","offers":[{"title":"Default Title","offer_id":54639938273555,"sku":"CA01041","price":399.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/CA01041-Crane-Kingpin-Component-Kit-1.jpg?v=1788281388"},{"product_id":"spicer-dana-60-king-pin-top-cap","title":"Spicer Dana 60 Upper King Pin Cap","description":"\u003cp\u003eThe Dana 60 Upper King Pin Cap is a genuine Spicer replacement component designed to meet or exceed original equipment (OE) specifications. This cap retains the kingpin spring in place and ensures proper preload and steering performance in your Dana 60 front axle assembly. Manufactured to OE standards, it delivers the same reliability and performance trusted by vehicle manufacturers and off-road builders worldwide.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Dana 60 Upper King Pin Cap\u003c\/li\u003e\n\u003cli\u003eDesigned for single-side replacement\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003cul\u003e\n\u003cli\u003eAxle Model: Dana 60\u003c\/li\u003e\n\u003cli\u003eLocation: Upper Kingpin\u003c\/li\u003e\n\u003cli\u003eFunction: Retains Kingpin Spring\u003c\/li\u003e\n\u003cli\u003eBrand: Spicer (Genuine OE Part)\u003c\/li\u003e\n\u003cli\u003eSold: Individually (Single Side Only)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003cul\u003e\n\u003cli\u003eFits Dana 60 Front Axles\u003c\/li\u003e\n\u003cli\u003eCompatible with a wide range of Dana 60-equipped vehicles, including Jeep, Ford, GM, and Dodge front axle assemblies\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eTech Insight\u003c\/strong\u003e \u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n          \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n          \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003cp\u003eThe upper kingpin bearing cap is a critical component that secures the spring assembly and maintains the proper preload on the kingpin in a Dana 60 front axle. Replacing a worn or damaged cap helps prevent steering slop and ensures long-term reliability in heavy duty off-road or towing applications. Always pair with high quality kingpin bearings and bushings during rebuilds for optimal performance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e","brand":"Dana Limited","offers":[{"title":"Default Title","offer_id":54639938601235,"sku":"620132","price":27.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/620132-Spicer-Dana60-King-Pin-Top-Cap-1.jpg?v=1788281309"},{"product_id":"crane-axle-dana-60-kingpin-spring-eliminator-kit","title":"Crane Axle Dana 60 Kingpin Spring Eliminator Kit","description":"\u003cp\u003eThe Crane Axle Dana 60 King Pin Spring Eliminator Kit is designed to replace the factory kingpin spring preload system found in Dana 60 kingpin front axles. By replacing the OEM spring assembly with heavy durometer preload bushings, this system improves steering stability, reduces unwanted knuckle movement, and increases durability under high steering loads.\u003c\/p\u003e\n\u003cp\u003eFactory kingpin springs are a common wear and failure point in lifted trucks, rock crawlers, and heavy-duty off-road vehicles running larger tires and high steer systems. Under repeated steering load and suspension articulation, the factory spring can compress and lose preload consistency, leading to steering looseness, vibration, and death wobble. The Crane Axle Spring Eliminator provides a more controlled preload system designed for improved steering precision in both street-driven and off-road applications.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eIncludes:\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Heavy Durometer Bushings\u003c\/li\u003e\n\u003cli\u003e(4) Shims\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eSpecifications \u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" height=\"14\" width=\"14\"\u003e\n          \u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M2.75 7H11.25\" class=\"vertical\"\u003e\u003c\/path\u003e\n          \u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M7 2.75L7 11.25\" class=\"horizontal\"\u003e\u003c\/path\u003e\n        \u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003cul\u003e\n\u003cli\u003eFits Dana 60 kingpin front axles\u003c\/li\u003e\n\u003cli\u003eReplaces OEM kingpin spring preload system\u003c\/li\u003e\n\u003cli\u003eHeavy durometer preload bushings\u003c\/li\u003e\n\u003cli\u003eIncludes preload adjustment shims\u003c\/li\u003e\n\u003cli\u003eCompatible with OEM and aftermarket kingpin knuckles\u003c\/li\u003e\n\u003cli\u003eWorks with high steer and crossover steering systems\u003c\/li\u003e\n\u003cli\u003eDesigned for heavy-duty steering applications\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFitment \u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" height=\"14\" width=\"14\"\u003e\n          \u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M2.75 7H11.25\" class=\"vertical\"\u003e\u003c\/path\u003e\n          \u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M7 2.75L7 11.25\" class=\"horizontal\"\u003e\u003c\/path\u003e\n        \u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003cth\u003eAxle Application\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-250 \/ F-350\u003c\/td\u003e\n\u003ctd\u003e1978–1991\u003c\/td\u003e\n\u003ctd\u003eDana 60 Front Kingpin Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eK30 \/ V30\u003c\/td\u003e\n\u003ctd\u003e1977–1991\u003c\/td\u003e\n\u003ctd\u003eDana 60 Front Kingpin Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eK3500 \/ V3500\u003c\/td\u003e\n\u003ctd\u003e1977–1991\u003c\/td\u003e\n\u003ctd\u003eDana 60 Front Kingpin Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eW250 \/ W350 \/ 3500\u003c\/td\u003e\n\u003ctd\u003e1975–1993\u003c\/td\u003e\n\u003ctd\u003eDana 60 Front Kingpin Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e--\u003c\/td\u003e\n\u003ctd\u003eAftermarket Kingpin Dana 60 Applications\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e--\u003c\/td\u003e\n\u003ctd\u003eDana 60 Front Kingpin Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cb\u003eFitment Notes:\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits OEM and aftermarket Dana 60 kingpin axles\u003c\/li\u003e\n\u003cli\u003eCompatible with high steer steering systems\u003c\/li\u003e\n\u003cli\u003eDesigned for kingpin-style Dana 60 front axles only\u003c\/li\u003e\n\u003cli\u003eIntended for front steering axle applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cb id=\"docs-internal-guid-785e0e5c-7fff-2ba3-1543-a8eda468b24e\"\u003e\u003cspan\u003eTech Insight\u003c\/span\u003e\u003c\/b\u003e \u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" height=\"14\" width=\"14\"\u003e\n          \u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M2.75 7H11.25\" class=\"vertical\"\u003e\u003c\/path\u003e\n          \u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M7 2.75L7 11.25\" class=\"horizontal\"\u003e\u003c\/path\u003e\n        \u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003cp\u003eThe factory Dana 60 kingpin spring system uses spring pressure to maintain preload within the steering knuckle assembly. As steering load increases from larger tires, beadlocks, hydraulic assist steering, and off-road use, the factory spring can compress and lose effectiveness over time.\u003c\/p\u003e\n\u003cp\u003eThe Crane Axle Spring Eliminator replaces the spring preload system with heavy durometer bushings that provide more consistent preload and reduce unwanted movement within the kingpin assembly. This helps improve steering stability, reduce steering wander and vibration, and minimize conditions that contribute to death wobble in high-load steering applications. Preload can be fine-tuned using the included shims to achieve the desired steering resistance.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e","brand":"Crane Axle","offers":[{"title":"Default Title","offer_id":54639938666771,"sku":"CASE60","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/Case60-Crane-Kingpin-Spring-Eliminator-Kit-1.jpg?v=1788281421"},{"product_id":"dana-60-lower-king-pin-cap","title":"Spicer Dana 60 Lower Kingpin Bearing Cap","description":"\u003cp\u003eThe \u003cstrong\u003eSpicer Dana 60 Lower Kingpin Bearing Cap\u003c\/strong\u003e is an OE-style replacement component designed for traditional Dana 60 kingpin front axle steering knuckles. Also known as the lower kingpin trunnion cap, this component mounts to the bottom of the steering knuckle and supports the lower kingpin bearing assembly. Whether you're rebuilding a Dana 60 front axle, replacing damaged steering components, or restoring an older Chevy, Dodge, Ford, or GMC truck, this genuine Spicer replacement helps maintain the proper fit and support of the kingpin steering system.\u003c\/p\u003e\n\u003cp\u003eThe lower bearing cap is an important part of the knuckle assembly, retaining the lower bearing components and helping maintain proper steering operation under load. Replacing a worn, cracked, or damaged cap during a kingpin rebuild helps restore the integrity of the steering assembly. Inspect the lower bearing, race, kingpin, and knuckle mounting surfaces during installation to ensure the complete assembly is in good condition.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Spicer Dana 60 Lower Kingpin Bearing Cap\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e This listing includes \u003cstrong\u003eone lower kingpin bearing cap only\u003c\/strong\u003e. The kingpin bearing, race, seal, and other steering components are not included unless separately specified. Designed for traditional Dana 60 kingpin front axle knuckles, not later ball-joint Dana 60 applications.\u003c\/p\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eSpicer \/ Dana\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003e37299\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSuperseding Part Number\u003c\/th\u003e\n\u003ctd\u003e070SC128\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003eLower Kingpin Bearing Cap \/ Lower Trunnion Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAxle Platform\u003c\/th\u003e\n\u003ctd\u003eDana Spicer 60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSteering Knuckle Type\u003c\/th\u003e\n\u003ctd\u003eKingpin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMounting Position\u003c\/th\u003e\n\u003ctd\u003eLower Steering Knuckle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAxle Position\u003c\/th\u003e\n\u003ctd\u003eFront\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eOE-Spec Steel Construction\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInstallation Type\u003c\/th\u003e\n\u003ctd\u003eBolt-On Lower Kingpin Bearing Cap Replacement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePrimary Application\u003c\/th\u003e\n\u003ctd\u003eDana 60 Kingpin Front Axle Rebuilds, Steering Knuckle Service \u0026amp; Heavy-Duty Off-Road Builds\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRequired Components\u003c\/th\u003e\n\u003ctd\u003eCompatible Dana 60 Kingpin Knuckle, Lower Bearing Assembly \u0026amp; Mounting Hardware\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eKnown Incompatibilities\u003c\/th\u003e\n\u003ctd\u003eBall-Joint Dana 60 Knuckles; Upper Kingpin Components; Non-Dana 60 Axle Applications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eQuantity\u003c\/th\u003e\n\u003ctd\u003eOne Lower Bearing Cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Note:\u003c\/strong\u003e Spicer part number 37299 is listed as superseded by 070SC128. Confirm current replacement availability and interchange before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003cp\u003eDesigned for select Dana 60 kingpin front axle applications found in Chevrolet, Dodge, Ford, and GMC heavy-duty trucks. Vehicle year and model alone do not guarantee compatibility. Confirm the installed axle uses traditional kingpin steering knuckles before ordering.\u003c\/p\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003cth\u003eAxle Application\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eK30\u003c\/td\u003e\n\u003ctd\u003e1977–1986\u003c\/td\u003e\n\u003ctd\u003eDana 60 Kingpin Front Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eW200\u003c\/td\u003e\n\u003ctd\u003e1979–1980\u003c\/td\u003e\n\u003ctd\u003eDana 60 Kingpin Front Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eW250\u003c\/td\u003e\n\u003ctd\u003e1981–1993\u003c\/td\u003e\n\u003ctd\u003eDana 60 Kingpin Front Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eW300\u003c\/td\u003e\n\u003ctd\u003e1979–1980\u003c\/td\u003e\n\u003ctd\u003eDana 60 Kingpin Front Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eW350\u003c\/td\u003e\n\u003ctd\u003e1981–1993\u003c\/td\u003e\n\u003ctd\u003eDana 60 Kingpin Front Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-350\u003c\/td\u003e\n\u003ctd\u003e1979–1991\u003c\/td\u003e\n\u003ctd\u003eDana 60 Kingpin Front Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eK35\u003c\/td\u003e\n\u003ctd\u003e1977–1978\u003c\/td\u003e\n\u003ctd\u003eDana 60 Kingpin Front Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eK3500\u003c\/td\u003e\n\u003ctd\u003e1979–1986\u003c\/td\u003e\n\u003ctd\u003eDana 60 Kingpin Front Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits compatible Dana 60 kingpin front axle steering knuckles\u003c\/li\u003e\n\u003cli\u003eInstalls in the lower position beneath the steering knuckle\u003c\/li\u003e\n\u003cli\u003eDesigned to support the lower kingpin bearing assembly\u003c\/li\u003e\n\u003cli\u003eNot compatible with Dana 60 ball-joint steering knuckles\u003c\/li\u003e\n\u003cli\u003eNot a replacement for the upper kingpin spring, bushing, or cap assembly\u003c\/li\u003e\n\u003cli\u003eDoes not include the lower kingpin bearing or race\u003c\/li\u003e\n\u003cli\u003eVerify axle identification, knuckle configuration, and original part number before ordering\u003c\/li\u003e\n\u003cli\u003eConfirm Spicer 37299 and 070SC128 interchange for the specific axle application\u003c\/li\u003e\n\u003cli\u003eInspect the kingpin, bearing, race, and mounting surfaces during installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBuilder Note:\u003c\/strong\u003e Not every Dana 60 front axle uses kingpin steering knuckles. Later Dana 60 applications commonly use ball joints, and those components are not interchangeable with traditional kingpin assemblies. If you're rebuilding a swapped or custom axle, identify the actual knuckle and axle components rather than relying on the vehicle model year.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ch4\u003eWhat does the Spicer 37299 lower kingpin bearing cap do?\u003c\/h4\u003e\n\u003cp\u003eThe lower kingpin bearing cap mounts beneath the Dana 60 steering knuckle and supports the lower kingpin bearing assembly. It is an important component in maintaining the integrity and proper operation of the kingpin steering system.\u003c\/p\u003e\n\u003ch4\u003eWill this fit my Dana 60 front axle?\u003c\/h4\u003e\n\u003cp\u003eThis cap is designed for compatible traditional Dana 60 kingpin front axle knuckles. It does not fit every Dana 60 because later axle generations commonly use ball-joint steering knuckles. Verify your axle and knuckle configuration before ordering.\u003c\/p\u003e\n\u003ch4\u003eIs Spicer 37299 the same as 070SC128?\u003c\/h4\u003e\n\u003cp\u003eThe supplied product information identifies Spicer 070SC128 as the superseding part number for 37299. Confirm the current Spicer replacement listing and application compatibility before ordering.\u003c\/p\u003e\n\u003ch4\u003eDoes this cap fit the upper or lower kingpin?\u003c\/h4\u003e\n\u003cp\u003eThis part fits the \u003cstrong\u003elower kingpin position\u003c\/strong\u003e on the Dana 60 steering knuckle. It is not designed to replace the upper kingpin spring, bushing, or cap components.\u003c\/p\u003e\n\u003ch4\u003eDoes the Spicer 37299 include the kingpin bearing?\u003c\/h4\u003e\n\u003cp\u003eNo. This listing includes one lower kingpin bearing cap only. The lower kingpin bearing, race, and other rebuild components are separate unless specifically included in another kit.\u003c\/p\u003e\n\u003ch4\u003eWhat are the signs of worn Dana 60 kingpin components?\u003c\/h4\u003e\n\u003cp\u003eCommon symptoms include excessive steering knuckle movement, loose steering, uneven tire wear, and abnormal bearing noise. Inspect the complete kingpin assembly to identify which components are worn before replacing parts.\u003c\/p\u003e\n\u003ch4\u003eCan I use this cap when rebuilding a Dana 60 kingpin axle?\u003c\/h4\u003e\n\u003cp\u003eYes. Replacing a damaged or worn lower bearing cap is part of restoring a compatible Dana 60 kingpin steering knuckle. Inspect the lower bearing, race, kingpin, and mounting surfaces during the rebuild.\u003c\/p\u003e\n\u003ch4\u003eWill this fit a Ford F-350 Dana 60?\u003c\/h4\u003e\n\u003cp\u003eThis cap is listed for select 1979–1991 Ford F-350 Dana 60 kingpin front axle applications. Confirm the installed axle and steering knuckle design because Ford used different front axle configurations across model years.\u003c\/p\u003e\n\u003ch4\u003eCan this part be used on custom rock crawler or tube chassis builds?\u003c\/h4\u003e\n\u003cp\u003eYes, provided the build uses a compatible Dana 60 kingpin steering knuckle. Many custom off-road vehicles use older Dana 60 axle components, but the actual knuckle configuration determines compatibility.\u003c\/p\u003e\n\u003ch4\u003eWhat should I inspect when replacing a lower kingpin bearing cap?\u003c\/h4\u003e\n\u003cp\u003eInspect the lower kingpin bearing and race, kingpin surface, knuckle mounting area, and cap fasteners for wear, corrosion, cracking, or damage. Follow the appropriate Dana\/Spicer service procedures and torque specifications during installation.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e","brand":"Yukon Gear \u0026 Axle","offers":[{"title":"Default Title","offer_id":54639938699539,"sku":"37299","price":52.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/37299-Crane-Axle-Dana-60-Lower-King-Pin-Cap-1.jpg?v=1788281323"},{"product_id":"dana-60-kingpin-spring-eliminator-kit-premium","title":"Crane Axle Premium Dana 60 Kingpin Spring Eliminator Kit","description":"\u003cp\u003eThe Crane Axle Premium Dana 60 King Pin Spring Eliminator Kit is designed to replace the factory kingpin spring preload system with a more stable and durable preload arrangement for Dana 60 kingpin front axles. By replacing the OEM spring assembly with heavy durometer bushings and new replacement cone bushings, this kit improves steering stability, reduces unwanted movement within the knuckle assembly, and increases long-term durability under heavy steering load.\u003c\/p\u003e\n\u003cp\u003eFactory kingpin springs are commonly known to weaken over time in lifted trucks and off-road vehicles running oversized tires, beadlocks, hydraulic assist steering, and high steer systems. As preload consistency deteriorates, steering slop, vibration, and death wobble can develop. The Crane Axle Premium system addresses these issues by combining rigid preload bushings with replacement cone bushings to restore tighter steering feel and more controlled kingpin preload.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eIncludes:\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Heavy Durometer Bushings\u003c\/li\u003e\n\u003cli\u003e(4) Shims\u003c\/li\u003e\n\u003cli\u003e(2) White Replacement Kingpin Bushings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eSpecifications \u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" height=\"14\" width=\"14\"\u003e\n          \u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M2.75 7H11.25\" class=\"vertical\"\u003e\u003c\/path\u003e\n          \u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M7 2.75L7 11.25\" class=\"horizontal\"\u003e\u003c\/path\u003e\n        \u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003cul\u003e\n\u003cli\u003eFits Dana 60 kingpin front axles\u003c\/li\u003e\n\u003cli\u003eReplaces OEM kingpin spring preload system\u003c\/li\u003e\n\u003cli\u003eHeavy durometer preload bushings\u003c\/li\u003e\n\u003cli\u003eIncludes preload adjustment shims\u003c\/li\u003e\n\u003cli\u003eIncludes replacement white cone bushings\u003c\/li\u003e\n\u003cli\u003eCompatible with OEM and aftermarket kingpin knuckles\u003c\/li\u003e\n\u003cli\u003eWorks with high steer and crossover steering systems\u003c\/li\u003e\n\u003cli\u003eDesigned for heavy-duty steering applications\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFitment \u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" height=\"14\" width=\"14\"\u003e\n          \u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M2.75 7H11.25\" class=\"vertical\"\u003e\u003c\/path\u003e\n          \u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M7 2.75L7 11.25\" class=\"horizontal\"\u003e\u003c\/path\u003e\n        \u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003cth\u003eAxle Application\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-250 \/ F-350\u003c\/td\u003e\n\u003ctd\u003e1978–1991\u003c\/td\u003e\n\u003ctd\u003eDana 60 Front Kingpin Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eK30 \/ V30\u003c\/td\u003e\n\u003ctd\u003e1977–1991\u003c\/td\u003e\n\u003ctd\u003eDana 60 Front Kingpin Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eK3500 \/ V3500\u003c\/td\u003e\n\u003ctd\u003e1977–1991\u003c\/td\u003e\n\u003ctd\u003eDana 60 Front Kingpin Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eW250 \/ W350 \/ 3500\u003c\/td\u003e\n\u003ctd\u003e1975–1993\u003c\/td\u003e\n\u003ctd\u003eDana 60 Front Kingpin Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e--\u003c\/td\u003e\n\u003ctd\u003eAftermarket Kingpin Dana 60 Applications\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e--\u003c\/td\u003e\n\u003ctd\u003eDana 60 Front Kingpin Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cb\u003eFitment Notes:\u003c\/b\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits OEM and aftermarket Dana 60 kingpin axles\u003c\/li\u003e\n\u003cli\u003eCompatible with high steer steering systems\u003c\/li\u003e\n\u003cli\u003eDesigned for kingpin-style Dana 60 front axles only\u003c\/li\u003e\n\u003cli\u003eIntended for front steering axle applications\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cmeta charset=\"utf-8\"\u003e \u003cb id=\"docs-internal-guid-785e0e5c-7fff-2ba3-1543-a8eda468b24e\"\u003e\u003cspan\u003eTech Insight\u003c\/span\u003e\u003c\/b\u003e \u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg xmlns=\"http:\/\/www.w3.org\/2000\/svg\" fill=\"none\" viewbox=\"0 0 14 14\" height=\"14\" width=\"14\"\u003e\n          \u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M2.75 7H11.25\" class=\"vertical\"\u003e\u003c\/path\u003e\n          \u003cpath stroke-linecap=\"round\" stroke-width=\"var(--icon-stroke-width)\" stroke=\"currentColor\" d=\"M7 2.75L7 11.25\" class=\"horizontal\"\u003e\u003c\/path\u003e\n        \u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003cp\u003eThe factory Dana 60 kingpin preload system relies on a spring assembly that can weaken and compress under repeated steering load, especially on vehicles running oversized tires and aggressive off-road setups. Once preload consistency is lost, steering instability and unwanted knuckle movement become increasingly common.\u003c\/p\u003e\n\u003cp\u003eThe Crane Axle Premium Spring Eliminator replaces the spring preload system with heavy durometer bushings designed to maintain more consistent pressure within the kingpin assembly. The addition of replacement cone bushings helps restore proper fitment in worn knuckle assemblies and improves long-term steering consistency. Combined with preload shims, the system allows builders to fine-tune steering resistance and maintain tighter kingpin control in both street and off-road environments.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e","brand":"Crane Axle","offers":[{"title":"Default Title","offer_id":54639938732307,"sku":"CASE60P","price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/Case60P-Crane-Kingpin-Spring-Eliminator-Kit-Bearings-1.jpg?v=1788281373"},{"product_id":"dana-king-pin-bushing","title":"Spicer Dana 60 Upper Kingpin Bushing","description":"\u003cp\u003eThe \u003cstrong\u003eSpicer 41886 Dana 60 Upper Kingpin Bushing\u003c\/strong\u003e is a genuine Spicer replacement bushing for Dana 60 kingpin steering knuckles. Installed in the upper kingpin assembly, this synthetic bushing supports the steering knuckle and helps maintain proper kingpin preload as part of a Dana 60 front axle rebuild.\u003c\/p\u003e\n\n\u003cp\u003eKingpin Dana 60 axles remain a common choice for custom Jeeps, rock crawlers, trail rigs, and fabricated off-road axle builds. Whether you are rebuilding a factory Dana 60 or servicing an axle that has been swapped into a custom vehicle, identifying the axle and kingpin steering configuration is more important than relying on vehicle year, make, and model alone.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e(1) Spicer 41886 Upper Kingpin Bushing\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n  \u003csummary class=\"details__header\"\u003e\n    \u003cstrong\u003eSpecifications\u003c\/strong\u003e\n    \u003cspan class=\"svg-wrapper icon-plus\"\u003e\n      \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n        \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n      \u003c\/svg\u003e\n    \u003c\/span\u003e\n  \u003c\/summary\u003e\n\n  \u003cdiv class=\"details-content rte\"\u003e\n    \u003ctable class=\"custom-specs-table\"\u003e\n      \u003ctbody\u003e\n        \u003ctr\u003e\n          \u003cth\u003eSpecification\u003c\/th\u003e\n          \u003cth\u003eDetails\u003c\/th\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eManufacturer\u003c\/td\u003e\n          \u003ctd\u003eSpicer\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003ePart Number\u003c\/td\u003e\n          \u003ctd\u003e41886\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eProduct Type\u003c\/td\u003e\n          \u003ctd\u003eUpper Kingpin Bushing\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eAxle Platform\u003c\/td\u003e\n          \u003ctd\u003eDana 60\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eAxle Position\u003c\/td\u003e\n          \u003ctd\u003eFront\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eSteering Configuration\u003c\/td\u003e\n          \u003ctd\u003eKingpin\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eInstallation Position\u003c\/td\u003e\n          \u003ctd\u003eUpper Kingpin Assembly\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eMaterial\u003c\/td\u003e\n          \u003ctd\u003eSynthetic\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003eQuantity\u003c\/td\u003e\n          \u003ctd\u003e(1) Bushing\u003c\/td\u003e\n        \u003c\/tr\u003e\n        \u003ctr\u003e\n          \u003ctd\u003ePrimary Application\u003c\/td\u003e\n          \u003ctd\u003eDana 60 Kingpin Front Axle Service \u0026amp; Rebuild\u003c\/td\u003e\n        \u003c\/tr\u003e\n      \u003c\/tbody\u003e\n    \u003c\/table\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n  \u003csummary class=\"details__header\"\u003e\n    \u003cstrong\u003eFitment\u003c\/strong\u003e\n    \u003cspan class=\"svg-wrapper icon-plus\"\u003e\n      \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n        \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n      \u003c\/svg\u003e\n    \u003c\/span\u003e\n  \u003c\/summary\u003e\n\n  \u003cdiv class=\"details-content rte\"\u003e\n    \u003cp\u003e\u003cstrong\u003eDesigned For:\u003c\/strong\u003e\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eDana 60 kingpin front axles\u003c\/li\u003e\n      \u003cli\u003eFactory Dana 60 kingpin axle rebuilds\u003c\/li\u003e\n      \u003cli\u003eCustom Dana 60 front axle builds\u003c\/li\u003e\n      \u003cli\u003eDana 60 axle swaps\u003c\/li\u003e\n      \u003cli\u003eRock crawlers and trail rigs using kingpin Dana 60 steering knuckles\u003c\/li\u003e\n    \u003c\/ul\u003e\n\n    \u003cp\u003e\u003cstrong\u003eCommon Factory Applications:\u003c\/strong\u003e\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eChevrolet and GMC trucks equipped with Dana 60 kingpin front axles\u003c\/li\u003e\n      \u003cli\u003eDodge W-Series trucks equipped with Dana 60 kingpin front axles\u003c\/li\u003e\n      \u003cli\u003eFord trucks equipped with Dana 60 kingpin front axles\u003c\/li\u003e\n    \u003c\/ul\u003e\n\n    \u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e\u003c\/p\u003e\n    \u003cul\u003e\n      \u003cli\u003eFor kingpin-style Dana 60 steering knuckles.\u003c\/li\u003e\n      \u003cli\u003eNot intended for ball-joint Dana 60 steering knuckles.\u003c\/li\u003e\n      \u003cli\u003eVerify the axle model and steering knuckle design before ordering.\u003c\/li\u003e\n      \u003cli\u003eCustom and swapped axles should be identified by the axle itself rather than the vehicle year, make, and model.\u003c\/li\u003e\n      \u003cli\u003eSold individually; service requirements may call for additional bushings or kingpin components.\u003c\/li\u003e\n    \u003c\/ul\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n  \u003csummary class=\"details__header\"\u003e\n    \u003cstrong\u003eFAQ\u003c\/strong\u003e\n    \u003cspan class=\"svg-wrapper icon-plus\"\u003e\n      \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n        \u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n        \u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n      \u003c\/svg\u003e\n    \u003c\/span\u003e\n  \u003c\/summary\u003e\n\n  \u003cdiv class=\"details-content rte\"\u003e\n    \u003ch3\u003eWhat does the upper kingpin bushing do?\u003c\/h3\u003e\n    \u003cp\u003eThe upper bushing is part of the Dana 60 kingpin steering assembly. It supports the upper portion of the steering knuckle and is part of the system used to maintain proper knuckle preload.\u003c\/p\u003e\n\n    \u003ch3\u003eHow do I know if my Dana 60 uses this bushing?\u003c\/h3\u003e\n    \u003cp\u003eThis bushing is intended for Dana 60 front axles using kingpin steering knuckles. Identify the axle and confirm that it uses a kingpin rather than a ball-joint steering configuration before ordering.\u003c\/p\u003e\n\n    \u003ch3\u003eWill this work with a Dana 60 that has been swapped into my Jeep or buggy?\u003c\/h3\u003e\n    \u003cp\u003eIt can if the swapped axle is a compatible Dana 60 kingpin front axle. For axle swaps and custom builds, fitment should be determined from the axle itself rather than the original vehicle application.\u003c\/p\u003e\n\n    \u003ch3\u003eIs this the upper or lower kingpin component?\u003c\/h3\u003e\n    \u003cp\u003eThis is the upper synthetic kingpin bushing. The lower portion of the Dana 60 kingpin assembly uses different components.\u003c\/p\u003e\n\n    \u003ch3\u003eHow many bushings are included?\u003c\/h3\u003e\n    \u003cp\u003eThis listing includes one Spicer 41886 upper kingpin bushing. Order the quantity required for the axle service or rebuild you are performing.\u003c\/p\u003e\n  \u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e","brand":"Dana Limited","offers":[{"title":"Default Title","offer_id":54639938765075,"sku":"41886","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/41886-Dana-60-King-Pin-Bushing-Lower-King-Pin-Seal-7.jpg?v=1788889988"},{"product_id":"crane-axle-ford-dana-60-kingpin-component-kit","title":"Crane Axle Ford Dana 60 Complete Kingpin Component Kit with Spring Eliminator","description":"\u003cp\u003eThe \u003cstrong\u003eCrane Axle Ford Dana 60 Kingpin Complete Component Kit\u003c\/strong\u003e includes the essential components needed to assemble, rebuild, or service a Ford Dana 60 kingpin front axle. Rather than including unnecessary differential or axle components found in oversized rebuild kits, this package focuses on the kingpin assembly itself—providing the bearings, races, bushings, seals, trunnions, and preload components required to restore proper steering performance.\u003c\/p\u003e\n\n\u003cp\u003eAt the core of the kit is the \u003cstrong\u003eCrane Axle Kingpin Spring Eliminator Kit\u003c\/strong\u003e, which replaces the factory spring-style preload system with a more consistent mechanical preload design. Combined with premium service components, this kit helps reduce steering play, improve kingpin stability, and provide dependable performance for trail rigs, rock crawlers, race vehicles, and heavy-duty Ford Dana 60 front axle builds.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Crane Axle Kingpin Spring Eliminator Kit\u003c\/li\u003e\n\u003cli\u003e(2) Upper Kingpin Cones with Seals\u003c\/li\u003e\n\u003cli\u003e(2) Upper Kingpin Bushings\u003c\/li\u003e\n\u003cli\u003e(2) Lower Kingpin Bearings, Races, and Seals\u003c\/li\u003e\n\u003cli\u003e(2) Lower Kingpin Caps (Trunnions) with Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eSpecifications \u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eFord Dana 60 Kingpin Front Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKit Type\u003c\/td\u003e\n\u003ctd\u003eComplete Kingpin Component Kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePreload System\u003c\/td\u003e\n\u003ctd\u003eCrane Axle Kingpin Spring Eliminator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Components\u003c\/td\u003e\n\u003ctd\u003eKingpin Cones, Bushings and Seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLower Components\u003c\/td\u003e\n\u003ctd\u003eBearings, Races, Seals and Trunnions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKnuckle Compatibility\u003c\/td\u003e\n\u003ctd\u003eFactory and Aftermarket Ford Dana 60 Kingpin Knuckles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eService Type\u003c\/td\u003e\n\u003ctd\u003eKingpin Rebuild or New Axle Assembly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended Use\u003c\/td\u003e\n\u003ctd\u003eHeavy-Duty Off-Road and Performance Applications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cstrong\u003eFitment \u003c\/strong\u003e\u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003cth\u003eAxle Application\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-350\u003c\/td\u003e\n\u003ctd\u003e1978–1991\u003c\/td\u003e\n\u003ctd\u003eDana 60 Kingpin Front Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCustom Builds\u003c\/td\u003e\n\u003ctd\u003eFabricated Off-Road Applications\u003c\/td\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eFord Dana 60 Kingpin Front Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003cp\u003e\u003cstrong\u003eFitment Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits Ford Dana 60 kingpin front axle assemblies only.\u003c\/li\u003e\n\u003cli\u003eCompatible with factory and aftermarket kingpin steering knuckles.\u003c\/li\u003e\n\u003cli\u003eDesigned for kingpin-style Dana 60 housings—not ball-joint Dana 60 axles.\u003c\/li\u003e\n\u003cli\u003eIntended for front steering axle rebuilds, restorations, and custom axle assemblies.\u003c\/li\u003e\n\u003cli\u003eVerify your axle is a kingpin Dana 60 before ordering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e\n\n\u003cdetails class=\"details\"\u003e\n\u003csummary\u003e\u003cb\u003eFAQ\u003c\/b\u003e \u003cspan class=\"svg-wrapper icon-plus\"\u003e\u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003c\/svg\u003e\u003c\/span\u003e\u003c\/summary\u003e\n\n\u003cdiv class=\"details-content rte\"\u003e\n\n\u003ch3\u003eWhat does the Crane Axle Kingpin Component Kit include?\u003c\/h3\u003e\n\u003cp\u003eThis kit includes the major service components required to rebuild the kingpin assemblies on a Ford Dana 60 front axle, including upper cones, bushings, lower bearings, races, seals, trunnions, hardware, and the Crane Axle Kingpin Spring Eliminator Kit.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is the benefit of the Kingpin Spring Eliminator Kit?\u003c\/h3\u003e\n\u003cp\u003eThe Spring Eliminator replaces the factory spring-style preload system with a more consistent mechanical preload arrangement, helping reduce steering play, maintain proper kingpin preload, and improve steering precision under heavy off-road use.\u003c\/p\u003e\n\n\u003ch3\u003eWill this kit fit a ball-joint Dana 60?\u003c\/h3\u003e\n\u003cp\u003eNo. This kit is designed exclusively for Ford Dana 60 kingpin front axles and is not compatible with later ball-joint Dana 60 housings.\u003c\/p\u003e\n\n\u003ch3\u003eDo I need this kit when rebuilding a Dana 60 kingpin axle?\u003c\/h3\u003e\n\u003cp\u003eIf you're rebuilding worn kingpin assemblies or assembling a kingpin axle from individual components, this kit provides the critical kingpin-specific parts commonly replaced during the process.\u003c\/p\u003e\n\n\u003ch3\u003eWhat are the symptoms of worn kingpin components?\u003c\/h3\u003e\n\u003cp\u003eExcessive steering play, wandering, loose steering feel, uneven tire wear, and knuckle movement under load are common indicators that the kingpin bushings, bearings, seals, or preload system require service.\u003c\/p\u003e\n\n\u003c\/div\u003e\n\u003c\/details\u003e\n\n\u003chr\u003e","brand":"Crane Axle","offers":[{"title":"Default Title","offer_id":54639938797843,"sku":"CA01042","price":359.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/CA01042-Crane-Kingpin-Component-Kit-1.jpg?v=1788281310"},{"product_id":"crane-axle-premium-dana-60-king-pin-spring-eliminator-kit-with-bearings","title":"Dana 60 Kingpin Spring Eliminator Kit w\/ Lower Kingpin Bearings \u0026 Seals","description":"\u003cp\u003eThe \u003cstrong\u003eCrane Axle Premium Dana 60 King Pin Spring Eliminator Kit with Lower Kingpin Bearings \u0026amp; Seals\u003c\/strong\u003e replaces the factory upper kingpin spring preload system with heavy-durometer bushings and adjustable shims for more consistent steering knuckle preload. Designed for OEM and aftermarket Dana 60 kingpin front axles, this upgraded system helps reduce unwanted knuckle movement and steering looseness under heavy steering loads. It is particularly useful for trucks, rock crawlers, and off-road vehicles running oversized tires, beadlocks, hydraulic assist steering, or high-steer systems.\u003c\/p\u003e\n\u003cp\u003eUnlike a basic kingpin spring eliminator, this premium package includes white replacement upper kingpin bushings, kingpin caps, lower kingpin bearings and races, and upper and lower kingpin seals for servicing both steering knuckles. The included shims allow preload adjustment during installation, while the replacement bearings and seals address additional wear points that can contribute to steering play. This makes the kit a practical upgrade when rebuilding Dana 60 kingpin knuckles or correcting worn steering components on heavy-duty street and off-road vehicles.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Crane Axle Heavy-Durometer Kingpin Preload Bushings\u003c\/li\u003e\n\u003cli\u003e(4) Kingpin Preload Adjustment Shims\u003c\/li\u003e\n\u003cli\u003e(2) White Replacement Upper Kingpin Bushings\u003c\/li\u003e\n\u003cli\u003e(2) Kingpin Caps\u003c\/li\u003e\n\u003cli\u003e(2) Lower Kingpin Bearings\u003c\/li\u003e\n\u003cli\u003e(2) Lower Kingpin Bearing Races\u003c\/li\u003e\n\u003cli\u003e(2) Lower Kingpin Seals\u003c\/li\u003e\n\u003cli\u003e(2) Upper Kingpin Seals\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eInstallation Note:\u003c\/strong\u003e Proper kingpin preload adjustment is required. Inspect the kingpin surfaces, knuckles, bearings, and related steering components before assembly. This kit services both sides of one Dana 60 kingpin front axle but is not a complete replacement for every component in the knuckle assembly.\u003c\/p\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e \u003cspan class=\"svg-wrapper icon-plus\"\u003e \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003c\/svg\u003e \u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ch3\u003eKit Specifications\u003c\/h3\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eCrane Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePart Number \/ SKU\u003c\/th\u003e\n\u003ctd\u003eCASE60P-BR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProduct Type\u003c\/th\u003e\n\u003ctd\u003ePremium Kingpin Spring Eliminator Kit with Lower Bearings \u0026amp; Seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAxle Platform\u003c\/th\u003e\n\u003ctd\u003eDana 60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAxle Position\u003c\/th\u003e\n\u003ctd\u003eFront Steering Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eKnuckle Design\u003c\/th\u003e\n\u003ctd\u003eKingpin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePreload System\u003c\/th\u003e\n\u003ctd\u003eHeavy-Durometer Bushings with Adjustable Shims\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eReplaces\u003c\/th\u003e\n\u003ctd\u003eFactory Upper Kingpin Spring Preload System\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePreload Adjustment\u003c\/th\u003e\n\u003ctd\u003eIncluded Adjustment Shims\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eUpper Kingpin Components\u003c\/th\u003e\n\u003ctd\u003eHeavy-Durometer Bushings, White Replacement Bushings, Shims, Caps \u0026amp; Seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eLower Kingpin Components\u003c\/th\u003e\n\u003ctd\u003eBearings, Races \u0026amp; Seals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eService Coverage\u003c\/th\u003e\n\u003ctd\u003eBoth Steering Knuckles \/ One Front Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eKnuckle Compatibility\u003c\/th\u003e\n\u003ctd\u003eOEM \u0026amp; Compatible Aftermarket Dana 60 Kingpin Knuckles\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSteering Compatibility\u003c\/th\u003e\n\u003ctd\u003eStock, High Steer, Crossover \u0026amp; Hydraulic Assist Applications\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInstallation Type\u003c\/th\u003e\n\u003ctd\u003eKingpin Preload Conversion \u0026amp; Bearing\/Seal Service\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eManufacturing\u003c\/th\u003e\n\u003ctd\u003eMade in the USA (Crane Axle Kit)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003ePrimary Application\u003c\/th\u003e\n\u003ctd\u003eDana 60 Kingpin Steering Stability, Preload Upgrade \u0026amp; Knuckle Service\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eKnown Incompatibilities\u003c\/th\u003e\n\u003ctd\u003eBall-Joint Dana 60 Axles and Non-Dana 60 Kingpin Assemblies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eIncluded Component Quantities\u003c\/h3\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eComponent\u003c\/th\u003e\n\u003cth\u003eQuantity\u003c\/th\u003e\n\u003cth\u003ePurpose\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeavy-Durometer Preload Bushings\u003c\/td\u003e\n\u003ctd\u003e(2)\u003c\/td\u003e\n\u003ctd\u003eReplace Factory Kingpin Spring Preload\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePreload Adjustment Shims\u003c\/td\u003e\n\u003ctd\u003e(4)\u003c\/td\u003e\n\u003ctd\u003eAdjust Upper Kingpin Preload\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWhite Replacement Kingpin Bushings\u003c\/td\u003e\n\u003ctd\u003e(2)\u003c\/td\u003e\n\u003ctd\u003eReplace Upper Kingpin Bushing Components\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKingpin Caps\u003c\/td\u003e\n\u003ctd\u003e(2)\u003c\/td\u003e\n\u003ctd\u003eUpper Kingpin Assembly Components\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLower Kingpin Bearings\u003c\/td\u003e\n\u003ctd\u003e(2)\u003c\/td\u003e\n\u003ctd\u003eSupport Lower Knuckle Pivot Loads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLower Kingpin Bearing Races\u003c\/td\u003e\n\u003ctd\u003e(2)\u003c\/td\u003e\n\u003ctd\u003eProvide Bearing Contact Surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLower Kingpin Seals\u003c\/td\u003e\n\u003ctd\u003e(2)\u003c\/td\u003e\n\u003ctd\u003eSeal Lower Kingpin Bearing Assemblies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Kingpin Seals\u003c\/td\u003e\n\u003ctd\u003e(2)\u003c\/td\u003e\n\u003ctd\u003eSeal Upper Kingpin Assemblies\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eComponent Note:\u003c\/strong\u003e This package includes the premium spring eliminator components and lower kingpin bearing\/seal service parts. Upper kingpin studs or cones, lower trunnion caps, and complete steering knuckle assemblies are not listed as included.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eFitment\u003c\/strong\u003e \u003cspan class=\"svg-wrapper icon-plus\"\u003e \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003c\/svg\u003e \u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible Dana 60 Kingpin Front Axle Applications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eDesigned for OEM and compatible aftermarket Dana 60 kingpin front steering axles. The following vehicles are common applications when equipped with the correct kingpin-style Dana 60 axle.\u003c\/p\u003e\n\u003ctable class=\"custom-specs-table\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eYear Range\u003c\/th\u003e\n\u003cth\u003eAxle Application\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eFord\u003c\/td\u003e\n\u003ctd\u003eF-250 \/ F-350\u003c\/td\u003e\n\u003ctd\u003e1978–1991\u003c\/td\u003e\n\u003ctd\u003eDana 60 Kingpin Front Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003ctd\u003eK30 \/ V30\u003c\/td\u003e\n\u003ctd\u003e1977–1991\u003c\/td\u003e\n\u003ctd\u003eDana 60 Kingpin Front Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGMC\u003c\/td\u003e\n\u003ctd\u003eK3500 \/ V3500\u003c\/td\u003e\n\u003ctd\u003e1977–1991\u003c\/td\u003e\n\u003ctd\u003eDana 60 Kingpin Front Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDodge\u003c\/td\u003e\n\u003ctd\u003eW250 \/ W350 \/ 3500\u003c\/td\u003e\n\u003ctd\u003e1975–1993\u003c\/td\u003e\n\u003ctd\u003eDana 60 Kingpin Front Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCustom Builds\u003c\/td\u003e\n\u003ctd\u003eAftermarket Kingpin Dana 60 Applications\u003c\/td\u003e\n\u003ctd\u003eUniversal\u003c\/td\u003e\n\u003ctd\u003eCompatible Dana 60 Kingpin Front Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cstrong\u003eFitment \u0026amp; Installation Notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits compatible OEM and aftermarket Dana 60 kingpin front axles.\u003c\/li\u003e\n\u003cli\u003eDesigned for kingpin-style steering knuckles, not ball-joint Dana 60 axles.\u003c\/li\u003e\n\u003cli\u003eCompatible with stock steering, high-steer arms, crossover steering, and hydraulic assist systems when the underlying knuckle assembly is compatible.\u003c\/li\u003e\n\u003cli\u003eVehicle year and model alone do not guarantee fitment; verify the actual front axle and knuckle design.\u003c\/li\u003e\n\u003cli\u003eInspect upper kingpin surfaces and lower bearing seats for damage or excessive wear.\u003c\/li\u003e\n\u003cli\u003eInstall new lower kingpin bearings and races using appropriate bearing installation procedures.\u003c\/li\u003e\n\u003cli\u003eSet upper kingpin preload using the included shims and the correct service procedure.\u003c\/li\u003e\n\u003cli\u003eVerify smooth steering movement and appropriate knuckle resistance after assembly.\u003c\/li\u003e\n\u003cli\u003eInspect tie rods, drag links, steering joints, wheel bearings, and related components when diagnosing steering looseness or vibration.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Note:\u003c\/strong\u003e Some vehicles within the listed year ranges were equipped with different front axle assemblies. Confirm that your vehicle has a Dana 60 kingpin front axle before ordering.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e\n\u003cdetails class=\"details\"\u003e\n\u003csummary class=\"details__header\"\u003e\u003cstrong\u003eFAQ\u003c\/strong\u003e \u003cspan class=\"svg-wrapper icon-plus\"\u003e \u003csvg width=\"14\" height=\"14\" viewbox=\"0 0 14 14\" fill=\"none\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\"\u003e\n\u003cpath class=\"vertical\" d=\"M2.75 7H11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003cpath class=\"horizontal\" d=\"M7 2.75L7 11.25\" stroke=\"currentColor\" stroke-width=\"var(--icon-stroke-width)\" stroke-linecap=\"round\"\u003e\u003c\/path\u003e\n\u003c\/svg\u003e \u003c\/span\u003e\u003c\/summary\u003e\n\u003cdiv class=\"details-content rte\"\u003e\n\u003ch4\u003eWhat does the Crane Axle Dana 60 Kingpin Spring Eliminator Kit do?\u003c\/h4\u003e\n\u003cp\u003eThe kit replaces the factory upper kingpin spring preload system with heavy-durometer bushings and adjustable shims. This provides more consistent knuckle preload and helps reduce unwanted movement under heavy steering loads.\u003c\/p\u003e\n\u003ch4\u003eWhat makes this premium kit different from the basic spring eliminator?\u003c\/h4\u003e\n\u003cp\u003eThis premium package includes heavy-durometer preload bushings, adjustment shims, white replacement upper kingpin bushings, and caps. It also includes lower kingpin bearings, races, and upper and lower seals for servicing both steering knuckles.\u003c\/p\u003e\n\u003ch4\u003eDoes the kit include components for both sides of the axle?\u003c\/h4\u003e\n\u003cp\u003eYes. The package includes two heavy-durometer bushings, two white replacement kingpin bushings, two caps, two lower bearings and races, two upper seals, two lower seals, and four adjustment shims for servicing both steering knuckles on one front axle.\u003c\/p\u003e\n\u003ch4\u003eWill this kit eliminate death wobble?\u003c\/h4\u003e\n\u003cp\u003eThe kit can help reduce steering looseness when worn kingpin springs, bushings, or lower bearings are contributing to excessive knuckle movement. However, death wobble can have multiple causes, including worn steering joints, loose track bars, wheel bearing problems, alignment issues, and tire-related problems. A complete steering and suspension inspection is recommended.\u003c\/p\u003e\n\u003ch4\u003eWhy are lower kingpin bearings and races included?\u003c\/h4\u003e\n\u003cp\u003eLower kingpin bearings support significant loads at the steering knuckle. Worn bearings or races can create steering play even when the upper preload system is functioning correctly. Replacing these components allows the lower pivot assembly to be serviced alongside the spring eliminator conversion.\u003c\/p\u003e\n\u003ch4\u003eWhat are the included preload shims used for?\u003c\/h4\u003e\n\u003cp\u003eThe shims allow the installer to adjust upper kingpin preload and steering knuckle resistance. Proper adjustment is important because insufficient preload can allow movement, while excessive preload can cause binding or accelerated wear.\u003c\/p\u003e\n\u003ch4\u003eDoes this kit fit ball-joint Dana 60 front axles?\u003c\/h4\u003e\n\u003cp\u003eNo. This kit is specifically designed for Dana 60 front axles with kingpin-style steering knuckles. Ball-joint Dana 60 axles use a different steering knuckle pivot system and require different components.\u003c\/p\u003e\n\u003ch4\u003eIs this kit compatible with high-steer and hydraulic assist steering?\u003c\/h4\u003e\n\u003cp\u003eYes. The kit is intended for compatible Dana 60 kingpin knuckles used with stock steering, high-steer arms, crossover steering, and hydraulic assist systems. Verify the knuckle design and steering hardware before installation.\u003c\/p\u003e\n\u003ch4\u003eDoes this replace every component in a Dana 60 kingpin assembly?\u003c\/h4\u003e\n\u003cp\u003eNo. This package includes the spring eliminator conversion components, replacement upper bushings, caps, lower bearings and races, and upper and lower seals. It is not a complete replacement for every kingpin, trunnion, or steering knuckle component.\u003c\/p\u003e\n\u003ch4\u003eWhen should Dana 60 kingpin components be inspected or replaced?\u003c\/h4\u003e\n\u003cp\u003eExcessive steering play, wandering, unusual knuckle movement, damaged seals, or rough steering movement can indicate worn kingpin components. Inspect the upper preload system, lower bearings, races, seals, and surrounding steering components to determine which parts require service.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003chr\u003e","brand":"Crane Axle","offers":[{"title":"Default Title","offer_id":54639938994451,"sku":"CASE60P-BR","price":208.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/files\/CASE60P-BR-Premium-Spring-Eliminator-Kit-Bearings-1_b051bc02-620e-4d5b-92c1-af9f454d790d.jpg?v=1792366552"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/1956\/8915\/collections\/PROMO_2027_TICKETS-768x538.jpg?v=1788459298","url":"https:\/\/kohparts.com\/collections\/axle-components.oembed","provider":"KOHParts.com","version":"1.0","type":"link"}