Yukon Gear & Axle: Built to Go the Distance
Share
Where Drivetrain Strength Meets the Hammers
At King of the Hammers, horsepower means nothing if you can't get it to the ground. Between high-speed desert racing, massive rock ledges, locked differentials, and oversized tires, drivetrain components take an incredible amount of punishment.
Ring and pinion gears, axle shafts, lockers, and differential assemblies have to survive loads that most vehicles will never experience. One broken axle or damaged gear set can bring an entire race to a stop.
That's where Yukon Gear & Axle has built its reputation.
As the Official Gear & Axle Partner of Ultra4 Racing, Yukon has spent years supporting the racers and builders who push their drivetrains to the limit. From sponsoring competitors to rebuilding differentials in the pits, Yukon has become a familiar part of the King of the Hammers community.

More Than a Sponsor: Team Yukon at King of the Hammers
Yukon's relationship with King of the Hammers goes back to the event's early growth. By 2021, the company was celebrating a decade of involvement in Johnson Valley, supporting competitors across multiple racing classes.
Its presence has included sponsorship of the 4500 Modified Class in the Every Man Challenge, one of the event's most competitive divisions. But Yukon's involvement has always extended beyond banners and race car decals.
During the 2021 event, Team Yukon supported 12 race teams while operating a full-service pit area equipped with replacement parts, tools, and differential rebuilding capabilities. The team helped competitors diagnose failures, replace damaged components, and rebuild differentials—even when those racers weren't using Yukon products.
That willingness to help reflects an important part of the King of the Hammers culture. Teams compete fiercely on the course, but back in the pits, helping another racer get to the starting line is part of what makes the event special. For Yukon, the goal wasn't simply to support its sponsored drivers. It was to help keep as many competitors racing as possible.

The Ultimate Rookie: Opening the Door to King of the Hammers
For most off-road enthusiasts, competing at King of the Hammers is a dream that comes with some serious obstacles. Building a race car, assembling a crew, preparing for technical inspection, and covering the costs of competition can put the experience out of reach for many talented drivers.
Yukon Gear & Axle set out to change that through its Ultimate Rookie Driver program. Working with King of the Hammers, Yukon created an opportunity for a selected newcomer to compete in the 4600 Stock Class with a fully prepared race vehicle.
For the 2026 event, the program offered a complete racing opportunity that included the vehicle, training, crew assistance, pit support, event passes, and hospitality. Instead of simply handing someone the keys, the program was designed to introduce a new competitor to the demands of off-road racing with experienced people supporting them.
It's an opportunity that goes beyond product sponsorship. By helping a new racer experience King of the Hammers firsthand, Yukon is investing in the next generation of competitors and the future of the sport.

Built for the Weakest Links in Your Drivetrain
Anyone who's spent time rock crawling knows that drivetrain failures rarely happen at a convenient moment. A tire wedges between two rocks. The driver adds throttle. The differential locks both axle shafts together, and the drivetrain suddenly has to handle an enormous amount of torque.
When something gives, it's often a ring and pinion, axle shaft, U-joint, or another heavily loaded component. Yukon develops drivetrain products for applications ranging from everyday trucks and Jeeps to high-horsepower rock crawlers and competitive Ultra4 vehicles.
Its product lineup includes:
- Ring & Pinion Gear Sets: Gear ratios for different axle platforms, tire sizes, and performance requirements.
- Chromoly Axle Shafts: Heavy-duty axle shaft options for demanding applications.
- Grizzly Lockers: Mechanical locking differentials designed to provide positive traction.
-
Zip Lockers: Selectable locking differentials for drivers who want control over when their axles are locked.
- Differential Covers: Protection for gears, lockers, and differential housings.
- Master Overhaul Kits: Bearings, seals, shims, and installation components for rebuilding differentials.
For serious off-road builds, choosing the right combination of components matters just as much as choosing individual parts. A stronger axle shaft won't prevent a gear failure caused by incorrect setup, and an aggressive gear ratio won't solve a drivetrain that's undersized for the vehicle. Building a dependable axle requires looking at the entire system.

From the Racecourse to Your Garage
You don't have to race King of the Hammers to benefit from properly selected drivetrain components. The same problems that challenge Ultra4 racers show up on recreational Jeeps, rock crawlers, trail buggies, and heavily modified trucks.
Larger tires increase the leverage placed on axle shafts and gears. Additional horsepower raises torque loads, while aggressive rock crawling can expose weaknesses in factory drivetrain components.
For builders planning an axle upgrade or re-gear, several factors deserve attention:
- Tire Size: Larger tires affect effective gearing and increase drivetrain loads.
- Gear Ratio: Proper gearing helps match engine performance to tire size and intended use.
- Axle Strength: Shaft diameter, spline count, material, and axle design all influence durability.
- Differential Selection: Open differentials, limited slips, automatic lockers, and selectable lockers serve different purposes.
- Installation Quality: Correct gear setup, bearing preload, and backlash are essential for long-term reliability.
Whether you're upgrading a Dana 60, rebuilding a GM 14-bolt, or changing the gearing in your Jeep, taking time to plan the complete drivetrain can help prevent expensive problems later.

Racing Is About More Than the Race Car
One of the things that stands out about Yukon's involvement at King of the Hammers is its commitment to the people behind the vehicles. Racing at Johnson Valley requires much more than a capable machine. It takes preparation, teamwork, problem-solving, and the willingness to keep going when things don't work out as planned.
As Team Yukon racer John Matthews explained when discussing the company's support:
"They've always had my back, and once I started racing, they've supported me 100%."
That relationship between manufacturer and racer is part of what keeps teams returning to the lakebed year after year. From helping rebuild a broken differential to giving a first-time racer the opportunity to compete, Yukon has demonstrated that its involvement in King of the Hammers extends well beyond selling parts.

Explore Yukon Gear & Axle at KOH Parts
From ring and pinion gear sets and axle shafts to lockers, differential covers, and master overhaul kits, Yukon Gear & Axle offers drivetrain components for a wide range of off-road applications.
At KOHParts.com, we're proud to feature Yukon as part of our growing selection of manufacturers with deep connections to King of the Hammers.
Whether you're re-gearing your Jeep, strengthening a Dana 60, building a custom axle, or preparing a competition vehicle for Johnson Valley, explore Yukon's lineup of drivetrain components designed for demanding off-road use.
→ SHOP YUKON GEAR & AXLE PRODUCTS
Built for the rocks. Backed by racing experience.